Thickness dependence of breakdown properties in control and N2O-Oxynitrided oxides was investigated. Nitrogen atoms piled up at the Si/SiO2 interface increase charge-to-breakdown (QBD) under substrate injection conditions for oxide thickness below 10 nm, while no meaningful improvement is observed above 10 nm. This thickness dependence is explained by the fact that N2O-oxynitridation reduces oxide defects near the Si/SiO2 interface. N2O-oxynitridation of the oxides reduces the number of neutral electron traps due to the chemical reaction of oxide defect with nitrogen atoms. Electron trapping of N2O-oxynitrided oxides is significantly suppressed; the reduction of electron trapping events into neutral electron traps increases QBD under substrate injection. On the other hand, under gate injection, N2O-oxynitrided oxides show low rate of hole trapping during the initial stress period. However, in heavily injected condition, electron trapping is not suppressed, resulting in little improvement of QBD. In addition, the control and N2O-oxynitrided oxides show quite similar dependence of QBD on stress current density, which is related primarily to the carrier transport phenomena (tunneling, traveling, impact ionization and hole injection).

We propose a nonlocal impact ionization model applicable for the drain region where electric field increases exponentially. It is expressed as a function of an electric field and a characteristic length which is determined by a thickness of gate oxide and a source/drain junction depth. An analytical substrate current model for n-MOSFET is also derived from the new nonlocal impact ionization model. The model well explains the reason why the theoretical characteristic length differs from empirical expressions used in a pseudo two-dimensional model for MOSFET's. The nonlocal impact ionization model implemented in a device simulator demonstrates that the new model can predict substrate current correctly in the framework of drift-diffusion model.

Optical and electrical measurements of thin film n-channel SOI-MOSFETs reveal that the exponential tail in photon emission spectra originates from electron-hole recombination. Bremsstrahlung radiation model as a physical mechanism of photon emission was experimentally negated. Negative threshold voltage shift at the initial stage of high field stress is found to be caused by hole trapping in buried oxide. Subsequent turnover characteristics is explained by a competing process between electron trapping in the front gate oxide and hole trapping in the buried oxide. As to the degradation of transconductance, generated surface state as well as trapped holes in the buried oxide which reduce vertical electric field in SOI film are involved in the complicate degradation of transconductance.

A novel method to obtain a compact plastic package with higher isolation by providing subsidiary inner ground leads between outer leads is proposed and demonstrated. The effect of the subsidiary ground leads is investigated by using a 3-dimensional electromagnetic field simulation and measuring the fabricated packages. Newly designed package with subsidiary ground leads achieves higher isolation by more than 10 dB at 3 GHz as compared to a conventional package. This package is applied to GaAs SPDT switch IC's. Isolation of the switch IC's is improved by 5 dB at 3 GHz by the subsidiary inner ground leads. The isolation characteristics are discussed based on the equivalent circuit extracted from the simulation results.