In this letter, the tradeoff between symbol rate and diversity gain of Space-Time Block Codes (STBCs) with linear receivers is considered. It is known that Group Orthogonal-Toeplitz Codes (GOTCs) can achieve a good tradeoff with linear receivers. However, the symbol rate of GOTCs is limited to that of the base Orthogonal Space-Time Block Codes (OSTBCs). We propose to simply change the GOTC base codes from OSTBCs to Quasi-Orthogonal Space-Time Block Codes (Q-OSTBCs). Q-OSTBCs can improve the symbol rate of GOTCs at the expense of diversity gain. Simulation results show that Q-OSTBC based GOTCs can improve the tradeoff between symbol rate and diversity gain over that of the original GOTCs.

Histopathology is a microscopic anatomical study of body tissues and widely used as a cancer diagnosing method. Generally, pathologists examine the structural deviation of cellular and sub-cellular components to diagnose the malignancy of body tissues. These judgments may often subjective to pathologists' skills and personal experiences. However, computational diagnosis tools may circumvent these limitations and improve the reliability of the diagnosis decisions. This paper proposes a prostate image classification method by extracting textural behavior using multifractal analysis. Fractal geometry is used to describe the complexity of self-similar structures as a non-integer exponent called fractal dimension. Natural complex structures (or images) are not self-similar, thus a single exponent (the fractal dimension) may not be adequate to describe the complexity of such structures. Multifractal analysis technique has been introduced to describe the complexity as a spectrum of fractal dimensions. Based on multifractal computation of digital imaging, we obtain two textural feature descriptors; i) local irregularity: α and ii) global regularity: f(α). We exploit these multifractal feature descriptors with a texton dictionary based classification model to discriminate cancer/non-cancer tissues of histopathology images of H&E stained prostate biopsy specimens. Moreover, we examine other three feature descriptors; Gabor filter bank, LM filter bank and Haralick features to benchmark the performance of the proposed method. Experiment results indicated that the performance of the proposed multifractal feature descriptor outperforms the other feature descriptors by achieving over 94% of correct classification accuracy.

In content services where people purchase and download large-volume contents, minimizing network traffic is crucial for the service provider and the network operator since they want to lower the cost charged for bandwidth and the cost for network infrastructure, respectively. Traffic localization is an effective way of reducing network traffic. Network traffic is localized when a client can obtain the requested content files from other a near-by altruistic client instead of the source servers. The concept of the peer-assisted content distribution network (CDN) can reduce the overall traffic with this mechanism and enable service providers to minimize traffic without deploying or borrowing distributed storage. To localize traffic effectively, content files that are likely to be requested by many clients should be cached locally. This paper presents a novel traffic engineering scheme for peer-assisted CDN models. Its key idea is to control the behavior of clients by using content-oriented incentive mechanism. This approach enables us to optimize traffic flows by letting altruistic clients download content files that are most likely contributed to localizing traffic among clients. In order to let altruistic clients request the desired files, we combine content files while keeping the price equal to the one for a single content. This paper presents a solution for optimizing the selection of content files to be combined so that cross traffic in a network is minimized. We also give a model for analyzing the upper-bound performance and the numerical results.

Predicting network throughput is important for network-aware applications. Network throughput depends on a number of factors, and many throughput prediction methods have been proposed. However, many of these methods are suffering from the fact that a distribution of traffic fluctuation is unclear and the scale and the bandwidth of networks are rapidly increasing. Furthermore, virtual machines are used as platforms in many network research and services fields, and they can affect network measurement. A prediction method that uses pairs of differently sized connections has been proposed. This method, which we call connection pair, features a small probe transfer using the TCP that can be used to predict the throughput of a large data transfer. We focus on measurements, analyses, and modeling for precise prediction results. We first clarified that the actual throughput for the connection pair is non-linearly and monotonically changed with noise. Second, we built a previously proposed predictor using the same training data sets as for our proposed method, and it was unsuitable for considering the above characteristics. We propose a throughput prediction method based on the connection pair that uses ν-support vector regression and the polynomial kernel to deal with prediction models represented as a non-linear and continuous monotonic function. The prediction results of our method compared to those of the previous predictor are more accurate. Moreover, under an unstable network state, the drop in accuracy is also smaller than that of the previous predictor.

In order to reduce cost and improve efficiency, many data centers adopt virtualization solutions. The advent of virtualization allows multiple virtual machines hosted on a single physical server. However, this poses new challenges for resource management. Web workloads which are dominant in data centers are known to vary dynamically with time. In order to meet application's service level agreement (SLA), how to allocate resources for virtual machines has become an important challenge in virtualized server environments, especially when dealing with fluctuating workloads and complex server applications. User experience is an important manifestation of SLA and attracts more attention. In this paper, the SLA is defined by server-side response time. Traditional resource allocation based on resource utilization has some drawbacks. We argue that dynamic resource allocation directly based on real-time user experience is more reasonable and also has practical significance. To address the problem, we propose a system architecture that combines response time measurements and analysis of user experience for resource allocation. An optimization model is introduced to dynamically allocate the resources among virtual machines. When resources are insufficient, we provide service differentiation and firstly guarantee resource requirements of applications that have higher priorities. We evaluate our proposal using TPC-W and Webbench. The experimental results show that our system can judiciously allocate system resources. The system helps stabilize applications' user experience. It can reduce the mean deviation of user experience from desired targets.

Real-time on-chip measurement of bit error rate (BER) for high-speed analog-to-digital converters (ADCs) does not only require expensive multi-port high-speed data acquisition equipment but also enormous post-processing. This paper proposes a low-cost built-in-self-test (BIST) circuit for high-speed ADC BER test. Conventionally, the calculation of BER requires a high-speed adder. The presented method takes the advantages of Gray coding and only needs simple logic circuits for BER evaluation. The prototype of the BIST circuit is fabricated along with a 5-bit high-speed flash ADC in a 90-nm CMOS process. The active area is only 90 µm 70 µm and the average power consumption is around 0.3 mW at 700 MS/s. The measurement of the BIST circuit shows consistent results with the measurement by external data acquisition equipment.

Post-silicon tuning is attracting a lot of attention for coping with increasing process variation. However, its tuning cost via testing is still a crucial problem. In this paper, we propose tuning-friendly body bias clustering with multiple bias voltages. The proposed method provides a small set of compensation levels so that the speed and leakage current vary monotonically according to the level. Thanks to this monotonic leveling and limitation of the number of levels, the test-cost of post-silicon tuning is significantly reduced. During the body bias clustering, the proposed method explicitly estimates and minimizes the average leakage after the post-silicon tuning. Experimental results demonstrate that the proposed method reduces the average leakage by 25.3 to 51.9% compared to non clustering case. In a test case of four clusters, the number of necessary tests is reduced by 83% compared to the conventional exhaustive test approach. We reveal that two bias voltages are sufficient when only a small number of compensation levels are allowed for test-cost reduction. We also give an implication on how to synthesize a circuit to which post-silicon tuning will be applied.

Geographic routing uses the geographical location information provided by nodes to make routing decisions. However, the nodes can not obtain accurate location information due to the effect of measurement error. A new routing strategy using maximum expected distance and angle (MEDA) algorithm is proposed to improve the performance and promote the successive transmission rate. We firstly introduce the expected distance and angle, and then we employ the principal component analysis to construct the object function for selecting the next hop node. We compare the proposed algorithm with maximum expectation within transmission range (MER) and greedy routing scheme (GRS) algorithms. Simulation results show that the proposed MEDA algorithm outperforms the MER and GRS algorithms with higher successive transmission rate.

This paper investigates the dominant impact on the interference rejection combining (IRC) receiver due to the downlink reference signal (RS) based covariance matrix estimation scheme. When the transmission modes using the cell-specific RS (CRS) in LTE/LTE-Advanced are assumed, the property of the non-precoded CRS is different from that of the data signals. This difference poses two problems to the IRC receiver. First, it results in different levels of accuracy for the RS based covariance matrix estimation. Second, assuming the case where the CRS from the interfering cell collides with the desired data signals of the serving cell, the IRC receiver cannot perfectly suppress this CRS interference. The results of simulations assuming two transmitter and receiver antenna branches show that the impact of the CRS-to-CRS collision among cells is greater than that for the CRS interference on the desired data signals especially in closed-loop multiple-input multiple-output (MIMO) systems, from the viewpoint of the output signal-to-interference-plus-noise power ratio (SINR). However, the IRC receiver improves the user throughput by more than 20% compared to the conventional maximal ratio combining (MRC) receiver under the simulation assumptions made in this paper even when the CRS-to-CRS collision is assumed. Furthermore, the results verify the observations made in regard to the impact of inter-cell interference of the CRS for various average received signal-to-noise power ratio (SNR) and signal-to-interference power ratio (SIR) environments.

In this letter, the problem of feature quantization in robust hashing is studied from the perspective of approximate nearest neighbor (ANN). We model the features of perceptually identical media as ANNs in the feature set and show that ANN indexing can well meet the robustness and discrimination requirements of feature quantization. A feature quantization algorithm is then developed by exploiting the random-projection based ANN indexing. For performance study, the distortion tolerance and randomness of the quantizer are analytically derived. Experimental results demonstrate that the proposed work is superior to state-of-the-art quantizers, and its random nature can provide robust hashing with security against hash forgery.

Bag of visual words is a promising approach to object categorization. However, in this framework, ambiguity exists in patch encoding by visual words, due to information loss caused by vector quantization. In this paper, we propose to incorporate patch-level contextual information into bag of visual words for reducing the ambiguity mentioned above. To achieve this goal, we construct a hierarchical codebook in which visual words in the upper hierarchy contain contextual information of visual words in the lower hierarchy. In the proposed method, from each sample point we extract patches of different scales, all of which are described by the SIFT descriptor. Then, we build the hierarchical codebook in which visual words created from coarse scale patches are put in the upper hierarchy, while visual words created from fine scale patches are put in the lower hierarchy. At the same time, by employing the corresponding relationship among these extracted patches, visual words in different hierarchies are associated with each other. After that, we design a method to assign patch pairs, whose patches are extracted from the same sample point, to the constructed codebook. Furthermore, to utilize image information effectively, we implement the proposed method based on two sets of features which are extracted through different sampling strategies and fuse them using a probabilistic approach. Finally, we evaluate the proposed method on dataset Caltech 101 and dataset Caltech 256. Experimental results demonstrate the effectiveness of the proposed method.

A parameterization of perfect sequences over composition algebras over the real number field is presented. According to the proposed parameterization theorem, a perfect sequence can be represented as a sum of trigonometric functions and points on a unit sphere of the algebra. Because of the non-commutativity of the multiplication, there are two definitions of perfect sequences, but the equivalence of the definitions is easily shown using the theorem. A composition sequence of sequences is introduced. Despite the non-associativity, the proposed theorem reveals that the composition sequence from perfect sequences is perfect.

The expected write deficiency of the index-less indexed flash codes (ILIFC) is studied. ILIFC is a coding scheme for flash memory, and consists of two stages with different coding techniques. This study investigates the write deficiency of the first stage of ILIFC, and shows that omitting the second stage of ILIFC can be a practical option for realizing flash codes with good average performance. To discuss the expected write deficiency of ILIFC, a random walk model is introduced as a formalization of the behavior of ILIFC. Based on the random walk model, two different techniques are developed to estimate the expected write deficiency. One technique requires some computation, but gives very precise estimation of the write deficiency. The other technique gives a closed-form formula of the write deficiency under a certain asymptotic scenario.

In this paper, we have addressed the problem of ordering transactions in network-on-chips (NoCs) for post-silicon validation. The main idea is to extract the order of the transactions from the local partial orders in each NoC tile based on a set of “happened-before” rules, assuming transactions do not have a timestamp. The assumption is based on the fact that implementation and usage of a global time as timestamp in such systems may not be practical or efficient. When a new transaction is received in a tile, we send special messages to the neighboring tiles to inform them regarding the new transaction. The process of sending those special messages continues recursively in all the tiles that receive them until another such special message is detected. This way, we relate local orders of different tiles with each other. We show that our method can reconstruct the correct transaction orders when communication delays are deterministic. We have shown the effectiveness of our method by correctly ordering the transaction in NoCs with mesh and torus topologies with different sizes from 5*5 to 9*9. Also, we have implemented the proposed method in hardware to show its feasibility.

We propose optical path routing and frequency slot assignment algorithms that can make the best use of elastic optical paths and the capabilities of distance adaptive modulation. Due to the computational difficulty of the assignment problem, we develop algorithms for 1+1 dedicated/1:1 shared protected ring networks and unprotected mesh networks to that fully utilize the characteristics of the topologies. Numerical experiments elucidate that the introduction of path elasticity and distance adaptive modulation significantly reduce the occupied bandwidth.

The large data-transfer time among different cores is a big problem in heterogeneous multi-core processors. This paper presents a method to accelerate the data transfers exploiting data-transfer-units together with complex memory allocation. We used block matching, which is very common in image processing, to evaluate our technique. The proposed method reduces the data-transfer time by more than 42% compared to the earlier works that use CPU-based data transfers. Moreover, the total processing time is only 15 ms for a VGA image with 1616 pixel blocks.

In this paper, we propose a method for designing genetically optimized Linguistic Models (LM) with the aid of fuzzy granulation. The fundamental idea of LM introduced by Pedrycz is followed and their design framework based on Genetic Algorithm (GA) is enhanced. A LM is designed by the use of information granulation realized via Context-based Fuzzy C-Means (CFCM) clustering. This clustering technique builds information granules represented as a fuzzy set. However, it is difficult to optimize the number of linguistic contexts, the number of clusters generated by each context, and the weighting exponent. Thus, we perform simultaneous optimization of design parameters linking information granules in the input and output spaces based on GA. Experiments on the coagulant dosing process in a water purification plant reveal that the proposed method shows better performance than the previous works and LM itself.

In this letter, a novel ultra-wideband circular quasi-fractal monopole antenna with a six-petaled lotus pattern is presented. The CPW-fed technique and quasi-fractal concept are used to achieve ultra-wideband characteristics. The size of the proposed antenna is 4250 mm2 with a lotus diameter of 19.8 mm. The proposed antenna exhibits ultra-wideband characteristics from 2.65 to 12.72 GHz, which corresponds to a fractional bandwidth of 131%. The measured radiation pattern of the proposed antenna is nearly omnidirectional.

L-band SiGe HBT frequency-tunable differential amplifiers with dual-bandpass or dual-bandstop responses have been developed for the next generation adaptive and/or reconfigurable wireless radios. Varactor-loaded dual-band resonators comprised of series and parallel LC circuits are employed in the output circuit of differential amplifiers for realizing dual-bandpass responses as well as the series feedback circuit for dual-bandstop responses. The varactor-loaded series and parallel LC resonator can provide a wider frequency separation between dual-band frequencies than the stacked LC resonator. With the use of the varactor-loaded dual-band resonator in the design of the low-noise SiGe HBT differential amplifier with dual-bandpass responses, the lower-band frequency can be varied from 0.58 to 0.77 GHz with a fixed upper-band frequency of 1.54 GHz. Meanwhile, the upper-band frequency can be varied from 1.1 to 1.5 GHz for a fixed lower-band frequency of 0.57 GHz. The dual-band gain was 6.4 to 13.3 dB over the whole frequency band. In addition, with the use of the varactor-loaded dual-band resonator in the design of the low-noise differential amplifier with dual-bandstop responses, the lower bandstop frequency can be varied from 0.38 to 0.68 GHz with an upper bandstop frequency from 1.05 to 1.12 GHz. Meanwhile, the upper bandstop frequency can be varied from 0.69 to 1.02 GHz for a lower bandstop frequency of 0.38 GHz. The maximal dual-band rejection of gain was 14.4 dB. The varactor-loaded dual-band resonator presented in this paper is expected to greatly contribute to realizing the next generation adaptive and/or reconfigurable wireless transceivers.

In this paper we consider the two-class classification problem with high-dimensional data. It is important to find a class of distributions such that we cannot expect good performance in classification for any classifier. In this paper, when two population variance-covariance matrices are different, we give a reasonable sufficient condition for distributions such that the misclassification rate converges to the worst value as the dimension of data tends to infinity for any classifier. Our results can give guidelines to decide whether or not an experiment is worth performing in many fields such as bioinformatics.