Differential Evolution (DE) algorithm is simple and effective. Since DE has been proposed, it has been widely used to solve various complex optimization problems. To further exploit the advantages of DE, we propose a new variant of DE, termed as ranking-based differential evolution (RDE), by performing ranking on the population. Progressively better individuals in the population are used for mutation operation, thus improving the algorithm's exploitation and exploration capability. Experimental results on a number of benchmark optimization functions show that RDE significantly outperforms the original DE and performs competitively in comparison with other two state-of-the-art DE variants.

Maximum run-length limited codes are constraint codes used in communication and data storage systems. Insertion/deletion correcting codes correct insertion or deletion errors caused in transmitted sequences and are used for combating synchronization errors. This paper investigates the maximum run-length limited single insertion/deletion correcting (RLL-SIDC) codes. More precisely, we construct efficiently encodable and decodable RLL-SIDC codes. Moreover, we present its encoding and decoding algorithms and show the redundancy of the code.

This paper introduces our work on a Movie Map, which will enable users to explore a given city area using 360° videos. Visual exploration of a city is always needed. Nowadays, we are familiar with Google Street View (GSV) that is an interactive visual map. Despite the wide use of GSV, it provides sparse images of streets, which often confuses users and lowers user satisfaction. Forty years ago, a video-based interactive map was created - it is well-known as Aspen Movie Map. Movie Map uses videos instead of sparse images and seems to improve the user experience dramatically. However, Aspen Movie Map was based on analog technology with a huge effort and never built again. Thus, we renovate the Movie Map using state-of-the-art technology. We build a new Movie Map system with an interface for exploring cities. The system consists of four stages; acquisition, analysis, management, and interaction. After acquiring 360° videos along streets in target areas, the analysis of videos is almost automatic. Frames of the video are localized on the map, intersections are detected, and videos are segmented. Turning views at intersections are synthesized. By connecting the video segments following the specified movement in an area, we can watch a walking view along a street. The interface allows for easy exploration of a target area. It can also show virtual billboards in the view.

The present paper proposes orthogonal variable spreading factor codes over finite fields for multi-rate communications. The proposed codes have layered structures that combine sequences generated by discrete Fourier transforms over finite fields, and have various code lengths. The design method for the proposed codes and examples of the codes are shown.

We propose a HDR (high dynamic range) reconstruction method in an image sensor with a pixel-parallel ADC (analog-to-digital converter) for non-destructively reading out the intermediate exposure image. We report the circuit design for such an image sensor and the evaluation of the basic HDR reconstruction method.

Utilization data (a kind of incomplete data) is defined as the fraction of a fixed period in which the system is busy. In computer systems, utilization data is very common and easily observable, such as CPU utilization. Unlike inter-arrival times and waiting times, it is more significant to consider the parameter estimation of transaction-based systems with utilization data. In our previous work [7], a novel parameter estimation method using utilization data for an Mt/M/1/K queueing system was presented to estimate the parameters of a non-homogeneous Poisson process (NHPP). Since NHPP is classified as a simple counting process, it may not fit actual arrival streams very well. As a generalization of NHPP, Markovian arrival process (MAP) takes account of the dependency between consecutive arrivals and is often used to model complex, bursty, and correlated traffic streams. In this paper, we concentrate on the parameter estimation of an MAP/M/1/K queueing system using utilization data. In particular, the parameters are estimated by using maximum likelihood estimation (MLE) method. Numerical experiments on real utilization data validate the proposed approach and evaluate the effective traffic intensity of the arrival stream of MAP/M/1/K queueing system. Besides, three kinds of utilization datasets are created from a simulation to assess the effects of observed time intervals on both estimation accuracy and computational cost. The numerical results show that MAP-based approach outperforms the exiting method in terms of both the estimation accuracy and computational cost.

In this letter, an artificial message error-based code scrambling scheme is proposed for secure communications in wiretap channels with channel reciprocity. In the proposed scheme, the artificial message bit errors agreed between the legitimate transmitter and receiver are added to the scrambled message bits at the transmitter prior to the channel encoding procedure, through which the artificial errors are generated by using the reciprocal channel between the legitimate transmitter and receiver. Because of the inaccessibility to the channel state information between the legitimate transmitter and receiver, an eavesdropper would fail to compensate for the artificial errors perfectly. Thus, in addition to decoding errors, the residual artificial errors will also be spread over the descrambled message of the eavesdropper by the error spreading effect of code scrambling. Therefore, unlike the conventional code scrambling scheme, the proposed scheme can provide strong message confidentiality for non-degraded eavesdropping channels, e.g., when the eavesdropper experiences no decoding errors. Furthermore, given that the artificial errors are introduced before the channel encoding procedure, the spread residual errors in the descrambled message remain undetected after the decoding procedures of the eavesdropper. Simulation results confirm that the proposed scheme outperforms the conventional scheme and provides strong message confidentiality in wiretap channels.

This paper proposes a method for cooperative multi-static Multiple Input Multiple Output (MIMO) radar that can estimate the number of targets. The purpose of this system is to monitor humans in an indoor environment. First, target positions within the estimation range are roughly detected by the Capon method and the mode vector corresponding to the detected positions is calculated. The mode vector is multiplied by the eigenvector to eliminate the virtual image. The spectrum of the evaluation function is calculated from the remaining positions, and the number of peaks in the spectrum is defined as the number of targets. Experiments carried out in an indoor environment confirm that the proposed method can estimate the number of targets with high accuracy.

In this study, we propose a mechanism called adaptive failsoft control to address peak traffic in mobile live streaming, using a chasing playback function. Although a cache system is avaliable to support the chasing playback function for live streaming in a base station and device-to-device communication, the request concentration by highlight scenes influences the traffic load owing to data unavailability. To avoid data unavailability, we adapted two live streaming features: (1) streaming data while switching the video quality, and (2) time variability of the number of requests. The second feature enables a fallback mechanism for the cache system by prioritizing cache eviction and terminating the transfer of cache-missed requests. This paper discusses the simulation results of the proposed mechanism, which adopts a request model appropriate for (a) avoiding peak traffic and (b) maintaining continuity of service.

Weighted Round-Robin (WRR) is often used, due to its simplicity, for scheduling packets or tasks. With WRR, a number of packets equal to the weight allocated to a flow can be served consecutively, which leads to a bursty service. Interleaved Weighted Round-Robin (IWRR) is a variant that mitigates this effect. We are interested in finding bounds on worst-case delay obtained with IWRR. To this end, we use a network calculus approach and find a strict service curve for IWRR. The result is obtained using the pseudo-inverse of a function. We show that the strict service curve is the best obtainable one, and that delay bounds derived from it are tight (i.e., worst-case) for flows of packets of constant size. Furthermore, the IWRR strict service curve dominates the strict service curve for WRR that was previously published. We provide some numerical examples to illustrate the reduction in worst-case delays caused by IWRR compared to WRR.

Leveraging on Network Function Virtualization (NFV) and Software Defined Networking (SDN), network slicing (NS) is recognized as a key technology that enables the 5G Infrastructure Provider (InP) to support diversified vertical services over a shared common physical infrastructure. 5G end-to-end (E2E) NS is a logical virtual network that spans across the 5G network. Existing works on improving the reliability of the 5G mainly focus on reliable wireless communications, on the other hand, the reliability of an NS also refers to the ability of the NS system to provide continued service. Hence, in this work, we focus on enhancing the reliability of the NS to cope with physical network node failures, and we investigate the NS deployment problem to improve the reliability of the system represented by the NS. The reliability of an NS is enhanced by two means: firstly, by considering the topology information of an NS, critical virtual nodes are backed up to allow failure recovery; secondly, the embedding of the augmented NS virtual network is optimized for failure avoidance. We formulate the embedding of the augmented virtual network (AVN) to maximize the survivability of the NS system as the survivable AVN embedding (S-AVNE) problem through an Integer Linear Program (ILP) formulation. Due to the complexity of the problem, a heuristic algorithm is introduced. Finally, we conduct intensive simulations to evaluate the performance of our algorithm with regard to improving the reliability of the NS system.

Horizon detection is useful in maritime image processing for various purposes, such as estimation of camera orientation, registration of consecutive frames, and restriction of the object search region. Existing horizon detection methods are based on edge extraction. For accuracy, they use multiple images, which are filtered with different filter sizes. However, this increases the processing time. In addition, these methods are not robust to blurting. Therefore, we developed a horizon detection method without extracting the candidates from the edge information by formulating the horizon detection problem as a global optimization problem. A horizon line in an image plane was represented by two parameters, which were optimized by an evolutionary algorithm (genetic algorithm). Thus, the local and global features of a horizon were concurrently utilized in the optimization process, which was accelerated by applying a coarse-to-fine strategy. As a result, we could detect the horizon line on high-resolution maritime images in about 50ms. The performance of the proposed method was tested on 49 videos of the Singapore marine dataset and the Buoy dataset, which contain over 16000 frames under different scenarios. Experimental results show that the proposed method can achieve higher accuracy than state-of-the-art methods.

This article proposes to apply the auto-correlation function (ACF), bispectrum analysis, and convolutional neural networks (CNN) to implement radar emitter identification (REI) based on intrapulse features. In this work, we combine ACF with bispectrum for signal feature extraction. We first calculate the ACF of each emitter signal, and then the bispectrum of the ACF and obtain the spectrograms. The spectrum images are taken as the feature maps of the radar emitters and fed into the CNN classifier to realize automatic identification. We simulate signal samples of different modulation types in experiments. We also consider the feature extraction method directly using bispectrum analysis for comparison. The simulation results demonstrate that by combining ACF with bispectrum analysis, the proposed scheme can attain stronger robustness to noise, the spectrograms of our approach have more pronounced features, and our approach can achieve better identification performance at low signal-to-noise ratios.

We introduce the r-ary sequence with period 2p2 derived from Euler quotients modulo 2p (p is an odd prime) where r is an odd prime divisor of (p-1). Then based on the cyclotomic theory and the theory of trace function in finite fields, we give the trace representation of the proposed sequence by determining the corresponding defining polynomial. Our results will be help for the implementation and the pseudo-random properties analysis of the sequences.

Convolutional neural networks (CNNs) are widely used for image processing tasks in both embedded systems and data centers. In data centers, high accuracy and low latency are desired for various tasks such as image processing of streaming videos. We propose an FPGA-based low-latency CNN inference for randomly wired convolutional neural networks (RWCNNs), whose layer structures are based on random graph models. Because RWCNNs have several convolution layers that have no direct dependencies between them, our architecture can process them efficiently using a pipeline method. At each layer, we need to use the calculation results of multiple layers as the input. We use an FPGA with HBM2 to enable parallel access to the input data with multiple HBM2 channels. We schedule the order of execution of the layers to improve the pipeline efficiency. We build a conflict graph using the scheduling results. Then, we allocate the calculation results of each layer to the HBM2 channels by coloring the graph. Because the pipeline execution needs to be properly controlled, we developed an automatic generation tool for hardware functions. We implemented the proposed architecture on the Alveo U50 FPGA. We investigated a trade-off between latency and recognition accuracy for the ImageNet classification task by comparing the inference performances for different input image sizes. We compared our accelerator with a conventional accelerator for ResNet-50. The results show that our accelerator reduces the latency by 2.21 times. We also obtained 12.6 and 4.93 times better efficiency than CPU and GPU, respectively. Thus, our accelerator for RWCNNs is suitable for low-latency inference.

With the development of IoT devices and sensors, edge computing is leading towards new services like autonomous cars and smart cities. Low-latency data access is an essential requirement for such services, and a large-capacity cache server is needed on the edge side. However, it is not realistic to build a large capacity cache server using only DRAM because DRAM is expensive and consumes substantially large power. A hybrid main memory system is promising to address this issue, in which main memory consists of DRAM and non-volatile memory. It achieves a large capacity of main memory within the power supply capabilities of current servers. In this paper, we propose Fogcached, that is, the extension of a widely-used KVS (Key-Value Store) server program (i.e., Memcached) to exploit both DRAM and non-volatile main memory (NVMM). We used Intel Optane DCPM as NVMM for its prototype. Fogcached implements a Dual-LRU (Least Recently Used) mechanism that seamlessly extends the memory management of Memcached to hybrid main memory. Fogcached reuses the segmented LRU of Memcached to manage cached objects in DRAM, adds another segmented LRU for those in DCPM and bridges the LRUs by a mechanism to automatically replace cached objects between DRAM and DCPM. Cached objects are autonomously moved between the two memory devices according to their access frequencies. Through experiments, we confirmed that Fogcached improved the peak value of a latency distribution by about 40% compared to Memcached.

The number of malware, including variants and new types, is dramatically increasing over the years, posing one of the greatest cybersecurity threats nowadays. To counteract such security threats, it is crucial to detect malware accurately and early enough. The recent advances in machine learning technology have brought increasing interest in malware detection. A number of research studies have been conducted in the field. It is well known that malware detection accuracy largely depends on the training dataset used. Creating a suitable training dataset for efficient malware detection is thus crucial. Different works usually use their own dataset; therefore, a dataset is only effective for one detection method, and strictly comparing several methods using a common training dataset is difficult. In this paper, we focus on how to create a training dataset for efficiently detecting malware. To achieve our goal, the first step is to clarify the information that can accurately characterize malware. This paper concentrates on threads, by treating them as important information for characterizing malware. Specifically, on the basis of the dynamic analysis log from the Alkanet, a system call tracer, we obtain the thread information and classify the thread information processing into four patterns. Then the malware detection is performed using the number of transitions of system calls appearing in the thread as a feature. Our comparative experimental results showed that the primary thread information is important and useful for detecting malware with high accuracy.

Computing the Lempel-Ziv Factorization (LZ77) of a string is one of the most important problems in computer science. Nowadays, it has been widely used in many applications such as data compression, text indexing and pattern discovery, and already become the heart of many file compressors like gzip and 7zip. In this paper, we show a linear time algorithm called Xone for computing the LZ77, which has the same space requirement with the previous best space requirement for linear time LZ77 factorization called BGone. Xone greatly improves the efficiency of BGone. Experiments show that the two versions of Xone: XoneT and XoneSA are about 27% and 31% faster than BGoneT and BGoneSA, respectively.

Real-time machine speech translation systems mimic human interpreters and translate incoming speech from a source language to the target language in real-time. Such systems can be achieved by performing low-latency processing in ASR (automatic speech recognition) module before passing the output to MT (machine translation) and TTS (text-to-speech synthesis) modules. Although several studies recently proposed sequence mechanisms for neural incremental ASR (ISR), these frameworks have a more complicated training mechanism than the standard attention-based ASR because they have to decide the incremental step and learn the alignment between speech and text. In this paper, we propose attention-transfer ISR (AT-ISR) that learns the knowledge from attention-based non-incremental ASR for a low delay end-to-end speech recognition. ISR comes with a trade-off between delay and performance, so we investigate how to reduce AT-ISR delay without a significant performance drop. Our experiment shows that AT-ISR achieves a comparable performance to the non-incremental ASR when the incremental recognition begins after the speech utterance reaches 25% of the complete utterance length. Additional experiments to investigate the effect of ISR on translation tasks are also performed. The focus is to find the optimum granularity of the output unit. The results reveal that our end-to-end subword-level ISR resulted in the best translation quality with the lowest WER and the lowest uncovered-word rate.

Bitcoin is one of popular cryptocurrencies widely used over the world, and its blockchain technology has attracted considerable attention. In Bitcoin system, it has been reported that transactions are prioritized according to transaction fees, and that transactions with high priorities are likely to be confirmed faster than those with low priorities. In this paper, we consider performance modeling of Bitcoin-blockchain system in order to characterize the transaction-confirmation time. We first introduce the Bitcoin system, focusing on proof-of-work, the consensus mechanism of Bitcoin blockchain. Then, we show some queueing models and its analytical results, discussing the implications and insights obtained from the queueing models.