In cyber-physical systems (CPSs) that interact between physical and information components, there are many sensors that are connected through a communication network. In such cases, the reduction of communication costs is important. Event-triggered control that the control input is updated only when the measured value is widely changed is well known as one of the control methods of CPSs. In this paper, we propose a design method of output feedback controllers with decentralized event-triggering mechanisms, where the notion of uniformly ultimate boundedness is utilized as a control specification. Using this notion, we can guarantee that the state stays within a certain set containing the origin after a certain time, which depends on the initial state. As a result, the number of times that the event occurs can be decreased. First, the design problem is formulated. Next, this problem is reduced to a BMI (bilinear matrix inequality) optimization problem, which can be solved by solving multiple LMI (linear matrix inequality) optimization problems. Finally, the effectiveness of the proposed method is presented by a numerical example.

In this paper, event-triggered control over a sensor network is studied as one of the control methods of cyber-physical systems. Event-triggered control is a method that communications occur only when the measured value is widely changed. In the proposed method, by solving an LMI (Linear Matrix Inequality) feasibility problem, an event-triggered output feedback controller such that the closed-loop system is asymptotically stable is derived. First, the problem formulation is given. Next, the control problem is reduced to an LMI feasibility problem. Finally, the proposed method is demonstrated by a numerical example.

Event-triggered control is a method that the control input is updated only when a certain condition is satisfied (i.e., an event occurs). In this paper, event-triggered control over a sensor network is studied based on the notion of uniformly ultimate boundedness. Since sensors are located in a distributed way, we consider multiple event-triggering conditions. In uniformly ultimate boundedness, it is guaranteed that if the state reaches a certain set containing the origin, the state stays within this set. Using this notion, the occurrence of events in the neighborhood of the origin is inhibited. First, the simultaneous design problem of a controller and event-triggering conditions is formulated. Next, this problem is reduced to an LMI (linear matrix inequality) optimization problem. Finally, the proposed method is demonstrated by a numerical example.

Event-triggered control is a method that the control input is updated only when a certain triggering condition is satisfied. In networked control systems, quantization errors via A/D conversion should be considered. In this paper, a new method for quantized event-triggered control with switching triggering conditions is proposed. For a discrete-time linear system, we consider the problem of finding a state-feedback controller such that the closed-loop system is uniformly ultimately bounded in a certain ellipsoid. This problem is reduced to an LMI (Linear Matrix Inequality) optimization problem. The volume of the ellipsoid may be adjusted. The effectiveness of the proposed method is presented by a numerical example.

This paper is concerned with exploring an extended approach for the stability analysis and synthesis for Markovian jump nonlinear systems (MJNLSs) via fuzzy control. The Takagi-Sugeno (T-S) fuzzy model is employed to represent the MJNLSs with incomplete transition description. In this paper, not all the elements of the rate transition matrices (RTMs), or probability transition matrices (PTMs) are assumed to be known. By fully considering the properties of the RTMs and PTMs, sufficient criteria of stability and stabilization is obtained in both continuous and discrete-time. Stabilization conditions with a mode-dependent fuzzy controller are derived for Markovian jump fuzzy systems in terms of linear matrix inequalities (LMIs), which can be readily solved by using existing LMI optimization techniques. Finally, illustrative numerical examples are provided to demonstrate the effectiveness of the proposed approach.

This paper presents the stability analysis for continuous-time Takagi-Sugeno fuzzy systems using a fuzzy Lyapunov function. The proposed fuzzy Lyapunov function involves the time derivatives of states to include new free matrices in the LMI stability conditions. These free matrices extend the solution space for Linear Matrix Inequalities (LMIs) problems. Numerical examples illustrate the effectiveness of the proposed methods.

For time-delay systems with mismatched disturbances and uncertainties, this paper developed an integral sliding mode control algorithm using output information only to stabilize the system. An integral sliding surface is comprised of output vectors and an auxiliary full-order compensator. The proposed output feedback sliding mode controller can satisfy the reaching and sliding condition and maintain the system on the sliding surface from the initial moment. When the specific linear matrix inequality has a solution, our method can guarantee the stability of the closed-loop system and satisfy the property of disturbance attenuation. Moreover, the design parameters of the controller and compensator can be simultaneously determined by the solution to the linear matrix inequality. Finally, a numerical example illustrated the applicability of the proposed scheme.

In this letter, delay-dependent stability criterion for linear time-delay systems with multiple time varying delays is proposed by employing the Lyapunov-Krasovskii functional approach and integral inequality. By the N-segmentation of delay length, we obtain less conservative results on the delay bounds which guarantee the asymptotic stability of the linear time-delay systems with multiple time varying delays. Simulation results show that the proposed stability criteria are less conservative than several other existing criteria.

As we scale toward nanometer technologies, the increase in interconnect parameter variations will bring significant performance variability. New design methodologies will emerge to facilitate construction of reliable systems from unreliable nanometer scale components. Such methodologies require new performance models which accurately capture the manufacturing realities. In this paper, we present a Linear Fractional Transform (LFT) based model for interconnect parametric uncertainty. The new model formulates the interconnect parametric uncertainty as a repeated scalar uncertainty structure. With the help of generalized Balanced Truncation Realization (BTR) and Linear Matrix Inequalities (LMI's), the porposed model reduces the order of the original interconnect network while preserves the stability. The LFT based new model even guarantees passivity if the BTR reduction is based on solutions to a pair of Linear Matrix Inequalities (LMI's) generated from Lur'e equations. In case of large number of uncertain parameters, the new model may be applied successively: the uncertain parameters are partitioned into groups, and with regard to each group, LFT based model is applied in turns.

This paper proposes the sliding mode control using LMI techniques and adaptive recurrent fuzzy neural network (RFNN) for a class of uncertain nonlinear time-delay systems. First, a novel TS recurrent fuzzy neural network (TS-RFNN) is developed to provide more flexible and powerful compensation of system uncertainty. Then, the TS-RFNN based sliding model control is proposed for uncertain time-delay systems. In detail, sliding surface design is derived to cope with the non-Isidori-Bynes canonical form of dynamics, unknown delay time, and mismatched uncertainties. Based on the Lyapunov-Krasoviskii method, the asymptotic stability condition of the sliding motion is formulated into solving a Linear Matrix Inequality (LMI) problem which is independent on the time-varying delay. Furthermore, the input coupling uncertainty is also taken into our consideration. The overall controlled system achieves asymptotic stability even if considering poor modeling. The contributions include: i) asymptotic sliding surface is designed from solving a simple and legible delay-independent LMI; and ii) the TS-RFNN is more realizable (due to fewer fuzzy rules being used). Finally, simulation results demonstrate the validity of the proposed control scheme.

In this letter, we propose a new H2 smoother (H2S) with a finite impulse response (FIR) structure for discrete-time state-space signal models. This smoother is called an H2 FIR smoother (H2FS). Constraints such as linearity, quasi-deadbeat property, FIR structure, and independence of the initial state information are required in advance to design H2FS that is optimal in the sense of H2 performance criterion. It is shown that H2FS design problem can be converted into the convex programming problem written in terms of a linear matrix inequality (LMI) with a linear equality constraint. Simulation study illustrates that the proposed H2FS is more robust against uncertainties and faster in convergence than the conventional H2S.

This letter presents new delayed perturbation bounds (DPBs) for stabilizing receding horizon H∞ control (RHHC). The linear matrix inequality (LMI) approach to determination of DPBs for the RHHC is proposed. We show through a numerical example that the RHHC can guarantee an H∞ norm bound for a larger class of systems with delayed perturbations than conventional infinite horizon H∞ control (IHHC).

This letter propose a new H∞ smoother (HIS) with a finite impulse response (FIR) structure for discrete-time state-space models. This smoother is called an H∞ FIR smoother (HIFS). Constraints such as linearity, quasi-deadbeat property, FIR structure, and independence of the initial state information are required in advance. Among smoothers with these requirements, we choose the HIFS to optimize H∞ performance criterion. The HIFS is obtained by solving the linear matrix inequality (LMI) problem with a parametrization of a linear equality constraint. It is shown through simulation that the proposed HIFS is more robust against uncertainties and faster in convergence than the conventional HIS.

This letter presents delayed perturbation bounds (DPBs) for receding horizon controls (RHCs) of continuous-time systems. The proposed DPBs are obtained easily by solving convex problems represented by linear matrix inequalities (LMIs). We show, by numerical examples, that the RHCs have larger DPBs than conventional linear quadratic regulators (LQRs).

To design a controller with block-diagonal structure for trajectory sensitivity minimization, we propose a method based on LMI. In order to reduce the trajectory sensitivity, linear quadratic regulator theory is adopted, and this is solved using LMI optimization technique.

This paper deals with a design problem of an observer-based robust preview control system for uncertain discrete-time systems. In this approach, we adopt 2-stage design scheme and we derive an observer-based robust controller with integral and preview actions such that a disturbance attenuation level is satisfactorily small for allowable uncertainties.

Stability analysis is one of the most important problems in analysis of hybrid dynamical systems. In this paper, a computational method of Lyapunov functions is proposed for stability analysis of hybrid automata that have set-valued vector fields. For this purpose, a formulation of matrix-valued sums of squares is provided and applied to derive an LMI/LME problem whose solution yields a Lyapunov function.

This letter presents parametric uncertainty bounds (PUBs) for stabilizing receding horizon H∞ control (RHHC). The proposed PUBs are obtained easily by solving convex optimization problems represented by linear matrix inequalities (LMIs). We show, by numerical example, that the RHHC can guarantee a H∞ norm bound for a larger class of uncertain systems than conventional infinite horizon H∞ control (IHHC).

In this paper, we propose a new robust model predictive control (MPC) technique for linear parameter varying (LPV) systems expressed as linear systems with feedback parameters. It is based on the minimization of the upper bound of finite horizon cost function using a new parameter dependent terminal weighting matrix. The proposed parameter dependent terminal weighting matrix for norm-bounded uncertain models provides a less conservative condition for terminal inequality. The optimization problem that satisfies the terminal inequality is solved by semi-definite programming involving linear matrix inequalities (LMIs). A numerical example is included to illustrate the effectiveness of the proposed method.

This paper studies the robustness of message masking communication over noisy channels using modified chaotic systems. First, the modified chaotic systems are introduced with a higher capability of transmitting messages than typical chaotic systems. Then, assuming an ideal channel, the chaotic message masking scheme is derived which achieves asymptotic convergence or dead-beat performance for recovering messages. Next, considering the case of noisy channels, an H∞ performance and an L2-gain optimal noise rejection are achieved by solving linear matrix inequality (LMI) problems. Furthermore, the ultimate bound of synchronization error and recovered message error can be adjusted by both design gains and the system parameter of the modified chaos. Using the proposed method, the bit-error-ratio and noise tolerance are improved. Finally, numerical simulations and DSP experiments are carried out to verify the theoretical derivations.