This paper proposes a beam and null simultaneous steering Space-Time Equalizer (S/T-Equalizer). The proposed S/T-Equalizer performs separated S/T-signal processing in order to reduce computational complexity to a practical level. For spatial signal processing, a new Adaptive Array Antenna algorithm is used that combines the beam and null steering concepts. For temporal signal processing, a conventional delayed decision feedback sequence estimation equalizer may be used. The proposed S/T-Equalizer was prototyped, and a series of field tests was conducted using a 5 GHz frequency band to evaluate transmission performances of the proposed system. Results show that the proposed S/T-Equalizer can reduce inter-symbol interference effects while maintaining reasonable signal strength, thereby improving BER performance.

The number of studies on adaptive antennas has greately increased in resent years in Japan. Most of these studies have sought to enhance the capacity and suppress multipath signals in wireless mobile communications. Adaptive antennas are expected to play an important role in future mobile radio systems. In this paper, we review the history and trends of adaptive antenna studies in Japan. We describe typical adaptive processing algorithms and contributions by Japanese researchers. We then introduce some applications of adaptive antennas for mobile communications. Furthermore, we discuss multi-dimensional signal processing, which is an extended version of the adaptive antenna.

Tree task structures occur frequently in many applications where parallelization may be desirable. We present a formal treatment of non-preemptively scheduling task trees on distributed memory multiprocessors and show that the fundamental problems of scheduling (i) a task tree in absence of any inter-task communication on a fixed number of processors and (ii) a task tree with inter-task communication on an unbounded number of processors are NP-complete. For task trees that satisfy certain constraints, we present an optimal scheduling algorithm. The algorithm is shown optimal over a wider set of task trees than previous works.

This paper proposes a framework for building a customized comparison-shopping system in which the users are allowed to add their own shopping stores dynamically. In this framework, a shopping agent is implemented with a robust inductive learning method that automatically constructs wrappers for semi-structured online stores. During learning, strong biases assumed in many existing systems are weakened so that the real stores with reasonably complex document structures can be handled.

In a mobile computing environment, the characteristics of wireless communication and host mobility are important considerations in providing an efficient payment service. Currently, most payment systems were not intended for use in a mobile environment, and as such they inherently possess some inefficient properties. In this paper, we propose a new micropayment system (AMPS), designed for use in a mobile computing environment. AMPS reduces the computational load of mobile hosts by directing operations normally performed by the client to the static portion of the network. With AMPS, a client's request for goods goes to a TTP server, called the AMPS server, using only one message. The client can also be disconnected while the AMPS server deals with the merchant, reducing communication costs and power consumption. User privacy is protected by hiding the details of the payment to the AMPS server. The AMPS server can also provide client anonymity to merchants. Another advantage of AMPS is the provision of transaction atomicity by checking goods and money before forwarding to clients or merchants, and preserving all necessary information for any possible future disputes.

The inter-cell interference between uplinks and downlinks in CDMA packet communication systems, employing a shared-TDD scheme, is evaluated under cellular environments. It is found that interference between base stations rarely degrades uplink throughput, but interference between mobile stations substantially degrades downlink throughput. A transmission power control scheme is proposed to improve the downlink throughput. The proposed scheme increases the transmission power of downlink packets when they are re-transmitted, and thus, improves the signal-to-interference ratio of the downlink re-transmission packets. Computer simulation shows that this scheme increases downlink throughput without sacrificing the uplink throughput until the uplink throughput reaches a maximum value.

The chemical stability of the constituent elements in polycrystalline Sr-Bi-Ta-O thin film with various Bi content prepared by metalorganic chemical vapor deposition (MOCVD) was investigated by X-ray photoelectron spectroscopy (XPS). Moreover, that of the epitaxial films was also investigated to estimate the effect of the grain boundary in polycrystalline films. Therefore, only the Bi element drastically changed from Bi3+ state to Bi0 one by the Ar sputtering. This change increased with increasing the Ta/Bi mole ratio in the film from 0.64 to 1.67. This result was observed not only for the polycrystalline films but also for the epitaxial films, suggesting that this is the grain character not grain boundary one. The stability and the leakage character of the film strongly depend on the constituent of the film.

Recent progress in ultrahigh bit rate optical transmission using time-division multiplexing and wavelength-division multiplexing is described. Latest over 1 Tbit/s transmission experiments are shown and the possibility of higher bit rate transmission is discussed.

A photonic crystal fibre has an array of microscopic air holes running along its length. The periodicity of the array is broken by a deliberate "defect" that acts as a waveguide core. Light is confined to this core by the holes. Although some designs of photonic crystal fibre guide light by total internal reflection and so can be considered analogues of conventional optical fibres, their properties can be strikingly different. Other designs guide light by photonic bandgap confinement and represent a totally new type of fibre.

Photonic crystals have seen major advances in the past few years in the optical range. The association of in-plane waveguiding and two-dimensional photonic crystals (PCs) in thin-slab or waveguide structures leads to good 3D confinement with easy fabrication. Such structures, much easier to fabricate than 3D PCs open many exciting opportunities in optoelectronic devices and integrated optics. We present experiments on a variety of structures and devices, as well as modelling tools, which show that 2D PCs etched through waveguides supported by substrates are a viable route to high-performance PC-based photonic integrated circuits (PICs). In particular, they exhibit low out-of-plane diffraction losses. Low-loss waveguides, high finesse microcavities, and their mutual coupling are demonstrated. PACS: 42.70 QS, 42.55 Sa, 42.82 m, 42.50-p.

The effect of wavelength detuning on the device performance of identical-epitaxial-layer (IEL) electroabsorption (EA) modulator integrated distributed feedback (DFB) lasers is studied in detail. Based on the lasing behavior of integrated devices with different amount of wavelength detuning and the photocurrent spectra under different reverse biases, the optimal wavelength detuning is experimentally determined to be around 30-40 nm for our IEL integrated devices. By adopting gain-coupled DFB laser section, integrated devices with optimal wavelength detuning have demonstrated excellent single mode performances. The extinction ratio is measured to be greater than 15 dB at -3 V, and the modulation bandwidth is around 8 GHz.

Signal path loss and propagation delay spread were measured at microwave frequencies of 3.35, 8.45, and 15.75 GHz along a straight quasi line-of-sight (LOS) street in an urban environment under different traffic conditions: daytime and nighttime. Comparison between daytime and nighttime measurements reveals that the break points shift toward the base station because of the increase in the effective heights of the road and sidewalk; break points were not seen during the daytime at a mobile antenna height (hm) of 1.6 m. According to the cumulative probabilities of the delay spreads during the nighttime, frequency dependence is not clearly observed and the delay spreads for hm = 1.6 m were clearly larger than those for hm = 2.7 m. This is because a lower hm results in stronger blocking of the LOS wave, as was also observed during the daytime. The plot of path losses versus delay spreads is confirmed to be represented by an exponential curve. The exponential coefficients during the daytime were observed to be greater than those during the nighttime. This indicates that a LOS wave is more likely to be blocked during the daytime.

In an ideal fiber grating having a uniform refractive index modulation, the reflection or the transmission spectrum is symmetric with equal amount of side lobes on both sides of the resonant wavelength of the fiber grating. It is observed that a long-period fiber grating made by a non-uniform UV laser beam through a uniform amplitude mask has an asymmetric transmission spectrum. The asymmetric characteristic is explained with Mach-Zehnder effect in the long-period fiber grating. The non-uniform UV laser beam makes also a non-uniform index modulation along the fiber core. Therefore, a beam coupled to a cladding mode at a section of the grating can be re-coupled to the core mode after passing a certain distance. The re-coupled beam makes Mach-Zehnder-like interference with the un-coupled core mode. However, it is presented that the asymmetric phenomenon can be overcome by scanning the UV laser beam along the fiber over the mask. The beam scanning method is able to suffer the same fluence of the UV laser beam on the fiber. Finally, a linearly chirped long-period fiber grating was made using the non-uniform UV laser beam. Due to the asymmetricity the chirping effect was not clearly observed. It is also presented that the beam scanning method could remove the asymmetric problem and recover the typical spectrum of the linearly chirped fiber grating.

The demonstrated capacity of 40-Gb/s WDM systems is now exceeding 3-Tb/s. We will discuss some of the enabling technologies for these high capacities and some of the technologies that may push the aggregate capacity of WDM systems towards 10-Tb/s.

A wavelength demultiplexer made of 2-D photonic crystal capable of simultaneously separating many channels from WDM light is analyzed in order to study the properties and clarify the design parameters. Numerical analyses are carried out for the optical filter structure and the demultiplexer structure which consists of several filters and waveguides carved in the crystal. The results of this paper show the considerations regarding the frequency tuning, the device size, the bandwidth and integration of filters. Further more, for a photonic crystal filter, a method for realizing a flat-top pass-band generally required from the dense-WDM systems is presented and its property is shown. The calculation method is the scattering matrix method which is proper to the analysis of the frequency domain in a 2-D photonic crystal with finite size and with some defects.

In an ideal fiber grating having a uniform refractive index modulation, the reflection or the transmission spectrum is symmetric with equal amount of side lobes on both sides of the resonant wavelength of the fiber grating. It is observed that a long-period fiber grating made by a non-uniform UV laser beam through a uniform amplitude mask has an asymmetric transmission spectrum. The asymmetric characteristic is explained with Mach-Zehnder effect in the long-period fiber grating. The non-uniform UV laser beam makes also a non-uniform index modulation along the fiber core. Therefore, a beam coupled to a cladding mode at a section of the grating can be re-coupled to the core mode after passing a certain distance. The re-coupled beam makes Mach-Zehnder-like interference with the un-coupled core mode. However, it is presented that the asymmetric phenomenon can be overcome by scanning the UV laser beam along the fiber over the mask. The beam scanning method is able to suffer the same fluence of the UV laser beam on the fiber. Finally, a linearly chirped long-period fiber grating was made using the non-uniform UV laser beam. Due to the asymmetricity the chirping effect was not clearly observed. It is also presented that the beam scanning method could remove the asymmetric problem and recover the typical spectrum of the linearly chirped fiber grating.

Recent progress in ultrahigh bit rate optical transmission using time-division multiplexing and wavelength-division multiplexing is described. Latest over 1 Tbit/s transmission experiments are shown and the possibility of higher bit rate transmission is discussed.

A photonic crystal fibre has an array of microscopic air holes running along its length. The periodicity of the array is broken by a deliberate "defect" that acts as a waveguide core. Light is confined to this core by the holes. Although some designs of photonic crystal fibre guide light by total internal reflection and so can be considered analogues of conventional optical fibres, their properties can be strikingly different. Other designs guide light by photonic bandgap confinement and represent a totally new type of fibre.

We demonstrate, through numerical simulations, the possibility of trans-oceanic single channel transmission at 160 Gbit/s with no active control. This was achieved using short period dispersion management, which supports short pulse propagation at practical map strengths. We demonstrate that through careful selection and optimisation of the system parameters the performance of this system can be extended. We also define the tolerable limits of the system to the residual dispersion slope and polarisation mode dispersion.

The effect of wavelength detuning on the device performance of identical-epitaxial-layer (IEL) electroabsorption (EA) modulator integrated distributed feedback (DFB) lasers is studied in detail. Based on the lasing behavior of integrated devices with different amount of wavelength detuning and the photocurrent spectra under different reverse biases, the optimal wavelength detuning is experimentally determined to be around 30-40 nm for our IEL integrated devices. By adopting gain-coupled DFB laser section, integrated devices with optimal wavelength detuning have demonstrated excellent single mode performances. The extinction ratio is measured to be greater than 15 dB at -3 V, and the modulation bandwidth is around 8 GHz.