A novel experimental design method based on a low-frequency active load-pull technique that includes harmonic tuning has been proposed for high-efficiency microwave power amplifiers. The intrinsic core component of a transistor with a maximum oscillation frequency of more than several tens of gigahertz can be approximately assumed as the nonlinear current source with no frequency dependence at an operation frequency of several gigahertz. In addition, the reactive parasitic elements in a transistor can be omitted at a frequency of much less than 1GHz. Therefore, the optimum impedance condition including harmonics for obtaining high efficiency in a nonlinear current source can be directly investigated based on a low-frequency active harmonic load-pull technique in the low-frequency region. The optimum load condition at the operation frequency for an external load circuit can be estimated by considering the properties of the reactive parasitic elements and the nonlinear current source. For an InGaAs/GaAs pHEMT, active harmonic load-pull considering up to the fifth-order harmonic frequency was experimentally carried out at the fundamental frequency of 20MHz. By using the estimated optimum impedance condition for an equivalent nonlinear current source, high-frequency amplifiers were designed and fabricated at the 1.9-GHz, 2.45-GHz, and 5.8-GHz bands. The fabricated amplifiers exhibited maximum drain efficiency values of 79%, 80%, and 74% at 1.9GHz, 2.47GHz, and 5.78GHz, respectively.

In this letter, a novel channel impulse response (CIR)-based fingerprinting positioning method using kernel principal component analysis (KPCA) has been proposed. During the offline phase of the proposed method, a survey is performed to collect all CIRs from access points, and a fingerprint database is constructed, which has vectors including CIR and physical location. During the online phase, KPCA is first employed to solve the nonlinearity and complexity in the CIR-position dependencies and extract the principal nonlinear features in CIRs, and support vector regression is then used to adaptively learn the regress function between the KPCA components and physical locations. In addition, the iterative narrowing-scope step is further used to refine the estimation. The performance comparison shows that the proposed method outperforms the traditional received signal strength based positioning methods.

Query response times are critical for cluster computing applications in data centers. In this letter, we argue that to optimize the network performance, we should consider the latency of the flows suffered loss, which are called tardy flows. We propose two tardy flow scheduling algorithms and show that our work offers significant performance gains through performance analysis and simulations.

Authors have studied degradation phenomenon on electrical contacts under the influences of an external micro-oscillation. A new micro-sliding mechanism 2 (MSM2) has developed, which provides micro-sliding driven by a piezo-electric actuator and elastic hinges. The experimental results are obtained on “minimal sliding amplitudes” to make resistances fluctuate on electrical contacts under some conditions which are three types of inputwaveform (sinusoidal, rectangular, and impulsive) and three levels of frictional force (1.6, 1.0, and 0.3 N/pin) by using the MSM2. The dynamical characteristics are discussed under the conditions. The simple theoretical model on the input signal and the output of the mechanism is built and the theoretical expressions from the model are obtained. A natural angular frequency (ω0=12600[s-1]) and a damping ratio (ζ=0.03[-]) are evaluated using experimental dynamical responses. The waveforms of inputs and outputs are obtained and the characteristics between inputs and outputs are also obtained on the theoretical model using the above. The maximal gain between the input and the output in rectangular or impulsive (24.4) is much larger than that (0.0) in sinusoidal. The difference on the output-accelerations between in sinusoidal and in rectangular (impulsive) is discussed. It is shown that it is possible to cause the degradation phenomenon in sinusoidal only when the output displacement are enlarged. It is also shown that it is possible to cause the phenomenon in rectangular or in impulsive, in addition to the above, when the external force has sharper rising and falling waveforms even if the displacement and the frequency of the force is small. The difference on the output-amplitudes between in rectangular and in impulsive is discussed. It is not clear that there is the difference between the effect in rectangular and that in impulsive. It is indicated that it is necessary to discuss the other causes, for instance, another dynamical, thermal, and chemical process.

With the rapid development of Internet of things (IoT), Radio Frequency Identification (RFID) has become one of the most significant information technologies in the 21st century. However, more and more privacy threats and security flaws have been emerging in various vital RFID systems. Traditional RFID systems only focus attention on foundational implementation, which lacks privacy protection and effective identity authentication. To solve the privacy protection problem this paper proposes a privacy protection method with a Privacy Enhancement Model for RFID (PEM4RFID). PEM4RFID utilizes a “2+2” identity authentication mechanism, which includes a Two-Factor Authentication Protocol (TFAP) based on “two-way authentication”. Our TFAP employs “hardware information + AES-ECC encryption”, while the ”“two-way authentication” is based on improved Combined Public Key (CPK). Case study shows that our proposed PEM4RFID has characteristics of untraceability and nonrepeatability of instructions, which realizes a good trade-off between privacy and security in RFID systems.

This letter presents a simple and explicit formulation of non-unique Wiener filters associated with the linear predictor for processing of sinusoids. It was shown in the literature that, if the input signal consists of only sinusoids and does not include a white noise, the input autocorrelation matrix in the Wiener-Hopf equation becomes rank-deficient and thus the Wiener filter is not uniquely determined. In this letter we deal with this rank-deficient problem and present a mathematical description of non-unique Wiener filters in a simple and explicit form. This description is directly obtained from the tap number, the frequency of sinusoid, and the delay parameter. We derive this result by means of the elementary row operations on the augmented matrix given by the Wiener-Hopf equation. We also show that the conventional Wiener filter for noisy input signal is included as a special case of our description.

Logistic regression is a powerful machine learning tool to classify data. When dealing with sensitive or private data, cares are necessary. In this paper, we propose a secure system for privacy-protecting both the training and predicting data in logistic regression via homomorphic encryption. Perhaps surprisingly, despite the non-polynomial tasks of training and predicting in logistic regression, we show that only additively homomorphic encryption is needed to build our system. Indeed, we instantiate our system with Paillier, LWE-based, and ring-LWE-based encryption schemes, highlighting the merits and demerits of each instantiation. Besides examining the costs of computation and communication, we carefully test our system over real datasets to demonstrate its utility.

In the health IoT (Internet of Things), the specialized sensor devices can be used to monitor remote health and notify the emergency information, e.g., blood pressure, heart rate, etc. These data can help the doctors to rescue the patients. In cloud-based health IoT, patients' medical/health data is managed by the cloud service providers. Secure storage and privacy preservation are indispensable for the outsourced medical/health data in cloud computing. In this paper, we study the integrity checking and sharing of outsourced private medical/health records for critical patients in public clouds (ICS). The patient can check his own medical/health data integrity and retrieve them. When a patient is in coma, some authorized entities and hospital can cooperate to share the patient's necessary medical/health data in order to rescue the patient. The paper studies the system model, security model and concrete scheme for ICS in public clouds. Based on the bilinear pairing technique, we design an efficient ICS protocol. Through security analysis and performance analysis, the proposed protocol is provably secure and efficient.

This paper presents an adaptive interference-aware receiver for multiuser multiple-input multiple-output (MU-MIMO) downlink systems in wireless local area network (WLAN) systems. The MU-MIMO downlink technique is one of the key techniques that are newly applied to WLAN systems in order to support a very high throughput. However, the simultaneous communication of several users causes inter-user interference (IUI), which adversely affects receivers. Therefore, in order to prevent IUI, a precoding technique is defined at the transmitter based on feedback from the receiver. Unfortunately, however, the receiver still suffers from interference, because the precoding technique is prone to practical errors from the feedback quantization and subcarrier grouping scheme. Whereas ordinary detection schemes are available to mitigate such interference, such schemes are unsuitable because of their low performance or high computational complexity. In this paper, we propose an switching algorithm based on the norm ratio between an effective channel matrix for the desired signal and that of the interfering signals. Simulation results based on the IEEE 802.11ac standard show that the proposed algorithm can achieve near-optimal performance with a 70% reduction in computational complexity.

In this work, the novel fingerprinting evaluation parameter, which is called the punishment cost, is proposed. This parameter can be calculated from the designed matrix, the punishment matrix, and the confusion matrix. The punishment cost can describe how well the result of positioning is in the designated grid or not, by which the conventional parameter, the accuracy, cannot describe. The experiment is done with real measured data on weekdays and weekends. The results are considered in terms of accuracy and the punishment cost. Three well-known machine learning algorithms, i.e. Decision Tree, k-Nearest Neighbors, and Artificial Neural Network, are verified in fingerprinting positioning. In experimental environment, Decision Tree can perform well on the data from weekends whereas the performance is underrated on the data from weekdays. The k-Nearest Neighbors has proper punishment costs, even though it has lower accuracy than that of Artificial Neural Network, which has moderate accuracies but lower punishment costs. Therefore, other criteria should be considered in order to select the algorithm for indoor positioning. In addition, punishment cost can facilitate the conversion spot positioning to floor positioning without data modification.

Dynamic Voltage/Frequency Scaling (DVFS) allows designers to improve energy efficiency through adjusting supply voltage at runtime in order to meet the workload demand. Previous works solving real-time DVFS problems often refer to the canonical schedules with the exponential length. Other solutions for online scheduling depend on empirical or stochastic heuristics, which potentially result in frequent fluctuations of voltage/speed scaling. This paper aims at increasing the schedule predictability using period transformation in the pinwheel task model and improves the control on power-awareness by decreasing the speeds of as many tasks as possible to the same level. Experimental results show the maximum energy savings of 6% over the recent Dynamic Power Management (DPM) method and 12% over other slack reclamation algorithms.

FDTD (Finite-Difference Time-Domain) method has been widely used for the analysis of photonic devices consisting of sub-wavelength structures. In recent years, increasing efforts have been made to implement the FDTD on GPGPUs (General-Purpose Graphic Processing Units), to shorten simulation time. On the other hand, it is widely recognized that most of the middle- and low-end GPGPUs have difference of computational performance, between single-precision and double-precision type arithmetics. Therefore the type selection of single/double precision for electromagnetic field variables in FDTD becomes a key issue from the viewpoint of the total simulation performance. In this study we investigated the difference of results between the use of single-precision and double-precision. As a most fundamental sub-wavelength photonic structure, we focused on an alternating multilayer (one dimensional periodic structure). Obtained results indicate that significant difference appears for the amplitudes of higher order spatial harmonic waves.

Mass-market head mounted displays (HMDs) are currently attracting a wide interest from consumers because they allow immersive virtual reality (VR) experiences at an affordable cost. Flying over a virtual environment is a common application of HMD. However, conventional keyboard- or mouse-based interfaces decrease the level of immersion. From this motivation, we design three types of immersive gesture interfaces (bird, superman, and hand) for the flyover navigation. A Kinect depth camera is used to recognize each gesture by extracting and analyzing user's body skeletons. We evaluate the usability of each interface through a user study. As a result, we analyze the advantages and disadvantages of each interface, and demonstrate that our gesture interfaces are preferable for obtaining a high level of immersion and fun in an HMD based VR environment.

Performance evaluation of an improved multiband impulse radio ultra-wideband (MIR UWB) system based on sub-band selection is proposed in this paper. In the improved scheme, a data mapping algorithm is introduced to a conventional MIR UWB system, and out of all the sub-bands, only partial ones are selected to transmit information data, which can improve the flexibility of sub-bands/spectrum allocation, avoid interference and provide a variety of data rates. Given diagrams of a transmitter and receiver, the exact bit error rate (BER) of the improved system is derived. A comparison of system performance between the improved MIR UWB system and the conventional MIR UWB system is presented in different channels. Simulation results show that the improved system can achieve the same data rate and better BER performance than the conventional MIR UWB system under additive white Gaussian noise (AWGN), multipath fading and interference coexistence channels. In addition, different data transmission rates and BER performances can be easily achieved by an appropriate choice of system parameters.

The analytic expressions of lightning electromagnetic fields generated by tortuous channel with an inclined lower section are obtained by decomposing the current infinitesimal and solving Maxwell's equations. By using the transmission line model and pulse function to express the channel-base current, the influence of length and tilt angle of the oblique part on lightning electromagnetic fields as well as the distribution laws of electromagnetic fields for different azimuth angles are analyzed. The results show that the electromagnetic fields in near area are mainly determined by the lower section of the tortuous discharge channel, and the peak values of electromagnetic fields in different field regions will increase with the increasing of the length of the lower section when L1 is shorter than the distance that return-stroke speed multiplied by peak time. Whereas the length of the lower section is longer than the distance that return-stroke speed multiplied by peak time, the waveforms of electromagnetic fields will overlap each other and won't be influenced by oblique part length of the discharge channel before the return-stroke current arrives at the inflection point. Moreover, the peak values of electromagnetic fields will decrease with the increase of tilt angle (the azimuth angle φ = 2π/3) and azimuth angle, and the impact of channel geometry on the electromagnetic field strengthens with the distance.

The reputation-based majority-voting approach is a promising solution for detecting malicious workers in a cloud system. However, this approach has a drawback in that it can detect malicious workers only when the number of colluders make up no more than half of all workers. In this paper, we simulate the behavior of a reputation-based method and mathematically analyze its accuracy. Through the analysis, we observe that, regardless of the number of colluders and their collusion probability, if the reputation value of a group is significantly different from those of other groups, it is a completely honest group. Based on the analysis result, we propose a new method for distinguishing honest workers from colluders even when the colluders make up the majority group. The proposed method constructs groups based on their reputations. A group with the significantly highest or lowest reputation value is considered a completely honest group. Otherwise, honest workers are mixed together with colluders in a group. The proposed method accurately identifies honest workers even in a mixed group by comparing each voting result one by one. The results of a security analysis and an experiment show that our method can identify honest workers much more accurately than a traditional reputation-based approach with little additional computational overhead.

SM3 is a hash function standard defined by China. Unlike SHA-1 and SHA-2, it is hard for SM3 to speed up the throughput because it has more complicated compression function than other hash algorithm. In this paper, we propose a 4-round-in-1 structure to reduce the number of rounds, and a logical simplifying to move 3 adders and 3 XOR gates from critical path to the non-critical path. Based in SMIC 65nm CMOS technology, the throughput of SM3 can achieve 6.54Gbps which is higher than that of the reported designs.

This paper proposes a new design formula of coupling coefficient between antenna and resonator for an efficient design of filtering antennas consisting of an antenna and resonators. The filtering antenna can be designed by introducing a well-established filter design theory. For such a design approach, an external Q factor at input port, coupling coefficients, and a radiation Q factor of the antenna need to be evaluated. However, conventional design methods have a time-consuming procedure, since there are no effective techniques to evaluate the coupling coefficient between resonator and antenna. To solve the problem, we derive the new design formula using only amplitude property of input reflection responses obtained from a coupled structure of resonator and antenna. As an example, a third-order filtering antenna is synthesized, designed, and tested at 2.45 GHz, which numerically and experimentally validates the effectiveness of the derived equation.

A 62ps timing resolution pulse generator (PG) is presented. The PG adopts the multi-phase ring oscillator and the pulse combiner circuit (PCC) to achieve the low timing error. The PCC can decide an arbitrary waveform via 16 phase outputs. PCC adopts the coarse-tuning stage (CTS) and the fine-tuning (FTS) to define the operational frequency range and the timing resolution, respectively. Hence, PCC uses edge combiner (EC) to combine the period window of CTS. The latency of PG is only 3 cycle times. The operational frequency range of PG is from 15MHz to 245MHz. The timing resolution and average accuracy of PG are 62.5ps and ±0.5 LSB, respectively. The RMS jitter and peak-to-peak jitter of PG are 6.55ps and 66.67ps, respectively, at 245MHz.

In order to further optimize the power consumption of Pseudo-CMOS inverter, this paper proposes a Re-Pull-Down transistor scheme. Two additional transistors are used to build another pull-down network. With this design, the quiescent current of the inverter can be reduced while the ratioless nature is preserved. Based on the reduced input gate area, two output transistors are set wider to compensate for the pull-up speed. The simulation result shows that, compared with Pseudo-CMOS inverter, the maximum quiescent current of the Re-Pull-Down transistor scheme inverter is reduced by 37.6% in the static analysis. Besides, the average power consumption is reduced by 30.8% in the 5-stage ring oscillator test.