Non-orthogonal multipe access based multiple-input multiple-output system (MIMO-NOMA) has been widely used in improving user's achievable rate of millimeter wave (mmWave) communication. To meet different requirements of each user in multi-user beams, this paper proposes a power allocation algorithm to satisfy the quality of service (QoS) of head user while maximizing the minimum rate of edge users from the perspective of max-min fairness. Suppose that the user who is closest to the base station (BS) is the head user and the other users are the edge users in each beam in this paper. Then, an optimization problem model of max-min fairness criterion is developed under the constraints of users' minimum rate requirements and the total transmitting power of the BS. The bisection method and Karush-Kuhn-Tucher (KKT) conditions are used to solve this complex non-convex problem, and simulation results show that both the minimum achievable rates of edge users and the average rate of all users are greatly improved significantly compared with the traditional MIMO-NOMA, which only consider max-min fairness of users.

This paper studies using price incentives to shift bandwidth demand from peak to non-peak periods. In particular, cost discounts decrease as peak monthly usage increases. We take into account the delay sensitivity of different apps: during peak hours, the usage of hard real-time applications (HRAS) is not counted in the user's monthly data cap, while the usage of other applications (OAS) is counted in the user's monthly data cap. As a result, users may voluntarily delay or abandon OAS in order to get a higher fee discount. Then, a new data rate control algorithm is proposed. The algorithm allocates the data rate according to the priority of the source, which is determined by two factors: (I) the allocated data rate; and (II) the waiting time.

The communications quality of content delivery networks (CDNs), which are geographically distributed networks that have been optimized for content delivery, deteriorates when interflow congestion conditions are severe. Herein, we propose an adaptive server and path switching scheme that is based on the estimated acquisition throughput of each path. We also provide simulation results that show our proposed method can provide higher throughput performance levels than existing methods.

Simultaneous multithreading (SMT) technology improves CPU throughput, but also causes unpredictable performance fluctuations for co-running workloads. Although recent major SMT processors have adopted some techniques to promote hardware support for quality-of-service (QoS), achieving both precise performance guarantees and high throughput on SMT architectures is still a challenging open problem. In this paper, we demonstrate through some comprehensive investigations on a cycle-accurate simulator that not only almost all in-core resources suffer from severe contention as workloads vary but also there is a non-linear relationship between performance and available quotas of resources. We consider these observations as the fundamental reason leading to the challenging problem above. Thus, we introduce QoSMT, a novel hardware scheme that leverages a closed-loop controlling mechanism consisting of detection, prediction and adjustment to enforce precise performance guarantees for specific targets, e.g. achieving 85%, 90% or 95% of the performance of a workload running alone respectively. We implement a prototype on GEM5 simulator. Experimental results show that the average control error is only 1.4%, 0.5% and 3.6%.

Media Access Control (MAC) is critical to guarantee different Quality of Service (QoS) requirements for Unmanned Aerial Vehicle (UAV) networks, such as high reliability for safety packets and high throughput for service packets. Meanwhile, due to their ability to provide lower delay and higher data rates, more UAVs are using frequently directional antennas. However, it is challenging to support different QoS in UAV networks with directional antennas, because of the high mobility of UAV which causes serious channel resource loss. In this paper, we propose CU-MAC which is a MAC protocol for Centralized UAV networks with directional antennas. First, we design a mobility prediction based time-frame optimization scheme to provide reliable broadcast service for safety packets. Then, a traffic prediction based channel allocation scheme is proposed to guarantee the priority of video packets which are the most common service packets nowadays. Simulation results show that compared with other representative protocols, CU-MAC achieves higher reliability for safety packets and improves the throughput of service packets, especially video packets.

To recognize transportation modes without any additional sensor devices, we demonstrate that the transportation modes can be recognized from communication quality factors. In the demonstration, instead of using global positioning system (GPS) and accelerometer sensors, we collect mobile TCP throughputs, received-signal strength indicators (RSSIs), and cellular base-station IDs (Cell IDs) through in-line network measurement when the user enjoys mobile services, such as video streaming. In accuracy evaluations, we conduct two different field experiments to collect the data in six typical transportation modes (static, walking, riding a bicycle, riding a bus, riding a train and riding a subway), and then construct the classifiers by applying a support-vector machine (SVM), k-nearest neighbor (k-NN), random forest (RF), and convolutional neural network (CNN). Our results show that these transportation modes can be recognized with high accuracy by using communication quality factors as well as the use of accelerometer sensors.

Device-to-device (D2D) communication in cellular networks is defined as direct communication between two mobile users without traversing the base station (BS) or core network. D2D communication can occur on the cellular frequencies (i.e., inband) or unlicensed spectrum (i.e., outband). A high capacity IEEE 802.11-based outband device-to-device communication system for cellular networks is introduced in this paper. Transmissions in device-to-device connections are managed using our proposed medium access control (MAC) protocol. In the proposed MAC protocol, backoff window size is adjusted dynamically considering the current network status and utilizing an appropriate transmission attempt rate. We have considered both cases that the request to send/clear to send (RTS/CTS) mechanism is and is not used in our protocol design. Describing mechanisms for guaranteeing quality of service (QoS) and enhancing reliability of the system is another part of our work. Moreover, performance of the system in the presence of channel impairments is investigated analytically and through simulations. Analytical and simulation results demonstrate that our proposed system has high throughput, and it can provide different levels of QoS for its users.

Effective capacity (EC) is an important performance metric for a time-varying wireless channel in order to evaluate the communication rate in the physical layer (PHL) while satisfying the statistical delay quality of service (QoS) requirement in data-link layer (DLL). This paper analyzes EC of amplify-and-forward wireless relay network with different relay selection (RS) protocols. First, through the analysis of the probability density function (PDF) of received signal-to-noise ratio (SNR), the exact expressions of EC for direct transmission (DT), random relay (RR), random relay with direct transmission (RR-WDT), best relay (BR) protocols are derived. Then a novel best relay with direct transmission (BR-WDT) protocol is proposed to maximize EC and an exact expression of EC for BR-WDT protocol is developed. Simulations demonstrate that the derived analytical results well match those of Monte-Carlo simulations. The proposed BR-WDT protocol can always achieve larger EC than other protocols while guaranteeing the delay QoS requirement. Moreover, the influence of distance between source and relay on EC is discussed, and optimal relay position for different RS protocols is estimated. Furthermore, EC of all protocols becomes smaller while delay QoS exponent becomes larger, and EC of BR-WDT becomes better while the number of relays becomes larger.

High-performance Network Over Coax, or HINOC for short, is a broadband access technology that can achieve bidirectional transmission for high-speed Internet service through a coaxial medium. In HINOC access networks, buffer management scheme can improve the fairness of buffer usage among different output ports and the overall loss performance. To provide different services to multiple priority classes while reducing the overall packet loss rate and ensuring fairness among the output ports, this study proposes a QoS optimization method for access networks. A backpressure-based queue threshold control scheme is used to minimize the weighted average packet loss rate among multiple priorities. A theoretical analysis is performed to examine the performance of the proposed scheme, and optimal system parameters are provided. Software simulation shows that the proposed method can improve the average packet loss rate by about 20% to 40% compared with existing buffer management schemes. Besides, FPGA evaluation reveals that the proposed method can be implemented in practical hardware and performs well in access networks.

The widespread application of mobile electronic devices has triggered a boom in energy consumption, especially in user equipment (UE). In this paper, we investigate the energy-efficiency (EE) of a UE experiencing the worst channel conditions, which is termed worst-EE. Due to the limited battery of the mobile equipment, worst-EE is a suitable metric for EE fairness optimization in the uplink transmissions of orthogonal frequency division multiple access (OFDMA) networks. More specifically, we determine the optimal power and sub-carrier allocation to maximize the worst-EE with respect to UEs' transmit power, sub-carriers and statistical quality-of-service (QoS). In order to maximize the worst-EE, we formulate a max-min power and sub-carrier allocation problem, which involves nonconvex fractional mixed integer nonlinear programming, i.e., NP-hard to solve. To solve the problem, we first relax the allocation of sub-carriers, formulate the upper bound problem on the original one and prove the quasi-concave property of objective function. With the aid of the Powell-Hestenes-Rockfellar (PHR) approach, we propose a fairness EE sub-carrier and power allocation algorithm. Finally, simulation results demonstrate the advantages of the proposed algorithm.

The centralized controller of SDN enables a global topology view of the underlying network. It is possible for the SDN controller to achieve globally optimized resource composition and utilization, including optimized end-to-end paths. Currently, resource composition in SDN arena is usually conducted in an imperative manner where composition logics are explicitly specified in high level programming languages. It requires strong programming and OpenFlow backgrounds. This paper proposes declarative path composition, namely Compass, which offers a human-friendly user interface similar to natural language. Borrowing methodologies from Semantic Web, Compass models and stores SDN resources using OWL and RDF, respectively, to foster the virtualized and unified management of the network resources regardless of the concrete controller platform. Besides, path composition is conducted in a declarative manner where the user merely specifies the composition goal in the SPARQL query language instead of explicitly specifying concrete composition details in programming languages. Composed paths are also reused based on similarity matching, to reduce the chance of time-consuming path composition. The experiment results reflect the applicability of Compass in path composition and reuse.

In this letter, an effective algorithm is proposed to improve the performance of relay enhanced cellular networks, which is to allocate appropriate resources to each access point with quality of service constraint. First we derive the ergodic rate for backhaul link based on a poison point process model, and then allocate resources to each link according to the quality of service requirements and ergodic rate of links. Numerical results show that the proposed algorithm can not only improve system throughput but also improve the rate distribution of user equipment.

This paper focuses on the bandwidth allocation methods based on real user experience for web browsing applications. Because the Internet and its services are rapidly increasing, the bandwidth allocation problem has become one of the typical challenges for Internet service providers (ISPs) and network planning with respect to providing high service quality. The quality of experience (QoE) plays an important role in the success of services, and the guarantee of QoE accordingly represents an important goal in network resource control schemes. To cope with this issue, this paper proposes two user-centric bandwidth resource allocation methods for web browsing applications. The first method dynamically allocates bandwidth by considering the same user's satisfaction in terms of QoE with respect to all users in the system, whereas the second method introduces an efficient trade-off between the QoE of each user group and the average QoE of all users. The purpose of these proposals is to provide a flexible solution to reasonably allocate limited network resources to users. By considering service quality from real users' perception viewpoint, the proposed allocation methods enable us to understand actual users' experiences. Compared to previous works, the numerical results show that the proposed bandwidth allocation methods achieve the following contributions: improving the QoE level for dissatisfied users and providing a fair distribution, as well as retaining a reasonable average QoE.

Web Service Composition (WSC) has been well recognized as a convenient and flexible way of service sharing and integration in service-oriented application fields. WSC aims at selecting and composing a set of initial services with respect to the Quality of Service (QoS) values of their attributes (e.g., price), in order to complete a complex task and meet user requirements. A major research challenge of the QoS-aware WSC problem is to select a proper set of services to maximize the QoS of the composite service meeting several QoS constraints upon various attributes, e.g. total price or runtime. In this article, a fast algorithm based on QoS-aware sampling (FAQS) is proposed, which can efficiently find the near-optimal composition result from sampled services. FAQS consists of five steps as follows. 1) QoS normalization is performed to unify different metrics for QoS attributes. 2) The normalized services are sampled and categorized by guaranteeing similar number of services in each class. 3) The frequencies of the sampled services are calculated to guarantee the composed services are the most frequent ones. This process ensures that the sampled services cover as many as possible initial services. 4) The sampled services are composed by solving a linear programming problem. 5) The initial composition results are further optimized by solving a modified multi-choice multi-dimensional knapsack problem (MMKP). Experimental results indicate that FAQS is much faster than existing algorithms and could obtain stable near-optimal result.

With the growth of cloud-based services, cloud data centers are experiencing large growth. A key component in a cloud data center is the network technology deployed. In particular, Ethernet technology, commonly deployed in cloud data centers, is already envisioned for 10 Tbps Ethernet. In this paper, we study and analyze the makespan, workload execution times, and virtual machine migrations as the network speed increases. In particular, we consider homogeneous and heterogeneous data centers, virtual machine scheduling algorithms, and workload scheduling algorithms. Results obtained from our study indicate that the increase in a network's speed reduces makespan and workloads execution times, while aiding in the increase of the number of virtual machine migrations. We further observed that the number of migrations' behaviors in relation to the speed of the networks also depends on the employed virtual machines scheduling algorithm.

Support of incoming traffic differentiation and Quality of Service (QoS) assurance is very important for the development of high performance packet switches, capable of separating traffic flows. In our previous paper, we proposed the implementation of two buffers at each crosspoint of a crossbar fabric that leads to the Dual Crosspoint Queued (DCQ) switch. Inside DCQ switch, one buffer is used to store the real-time traffic and the other for the non-real-time traffic. We also showed that the static priority algorithms can provide the QoS only for the real-time traffic due to their greedy nature that gives the absolute priority to that type of traffic. In order to overcome this problem, in our paper we propose the DCQ switch with the Largest Weighted Occupancy First scheduling algorithm that provides the desired QoS support for both traffic flows. Detailed analysis of the simulation results confirms the validity of proposed solution.

As a promising future network architecture, Information-centric networking (ICN) has attracted much attention, its ubiquitous in-network caching is one of the key technologies to optimize the dissemination of information. However, considering the diversity of contents and the limitation of cache resources in the Internet, it is usually difficult to find a one-fit-all caching strategy. How to manage the ubiquitous in-network cache in ICN has become an important problem. In this paper, we explore ways to improve cache performance from the three perspectives of spatiality, temporality and availability, based on which we further propose an in-network cache management strategy to support differentiated service. We divide contents requested in the network into different levels and the selection of caching strategies depends on the content level. Furthermore, the corresponding models of utilizing cache resources in spatiality, temporality and availability are also derived for comparison and analysis. Simulation verifies that our differentiated service based cache management strategy can optimize the utilization of cache resources and get higher overall cache performance.

To lengthen the operational time of mobile devices, power must be managed effectively. To achieve this objective, a Discontinuous Reception (DRX) mechanism is proposed for use in the long-term evolution (LTE) network to enable user equipment (UE) to consume power efficiently. The DRX mechanism provides parameters related to base stations such as evolved Node B (eNB) to configure and manage the transition of UEs between idle (sleep) and active states. Although these parameters can be adjusted dynamically in cooperation with the traffic scheduler, a high signaling overhead and processing load might be introduced in practical deployment if the parameters are adjusted too frequently. In this study, to examine power-saving efficiency, distinct traffic types were scheduled that were constrained by various quality of service (QoS) factors without dynamically changing the DRX parameters. The concept of burst-based scheduling is proposed, based on considering the state transitions and channel conditions of each UE, to increase power-saving efficiency while concurrently satisfying the desired QoS. Both Hypertext Transfer Protocol (HTTP) and video-stream traffic models were exhaustively simulated to examine the performance of the proposed scheme and numerous scheduling alternatives were tested to compare the proposed scheme with other schemes. The simulation results indicate that video-streaming traffic is more sensitive to the scheduling schemes than HTTP traffic. The simulation results were further analyzed in terms of traffic scheduling and parameter adjustment and the analysis results can help design future studies on power management in the LTE network.

This paper proposes a QoS-aware differential processing control (QADPC) scheme for OpenFlow-based mobile networks. QADPC classifies the input packets to the control plane by considering end terminal mobility and service type. Then, different capacities are assigned to each classified packet for prioritized processing. By means of Markov chains, QADPC is evaluated in terms of blocking probability and waiting time in the control plane. Analytical results demonstrate that QADPC offers high priority packets both lower blocking probability and less waiting time.

The availability of more and more Web services provides great varieties for users to design service processes. However, there are situations that services or service processes cannot meet users' requirements in functional QoS dimensions (e.g., translation quality in a machine translation service). In those cases, composing Web services and human tasks is expected to be a possible alternative solution. However, analysis of such practical efforts were rarely reported in previous researches, most of which focus on the technology of embedding human tasks in software environments. Therefore, this study aims at analyzing the effects of composing Web services and human activities using a case study in the domain of language service with large scale experiments. From the experiments and analysis, we find out that (1) service implementation variety can be greatly increased by composing Web services and human activities for satisfying users' QoS requirements; (2) functional QoS of a Web service can be significantly improved by inducing human activities with limited cost and execution time provided certain quality of human activities; and (3) multiple QoS attributes of a composite service are affected in different ways with different quality of human activities.