A first-order investigation of the transport and energy-loss processes in silicon dioxide is worked out in the frame of the Spherical-Harmonics solution of the Boltzmann Transport Equation. The SiO2 conduction band is treated as a single-valley spherical and parabolic band. The relevant scattering mechanisms are modeled consistently: both the polar and nonpolar electron-phonon scattering mechanisms are considered. The scattering rates for each contribution are analyzed in comparison with Monte Carlo data. A number of macroscopic transport properties of electrons in SiO2 are worked out in the steady-state regime for a homogeneous bulk structure. The investigation shows a good agreement in comparison with experiments in the low-field regime and for different temperatures.

In this paper the application of a linear-quadratic processor is proposed for detection of each user's signal in a direct sequence code division multiple access scheme and, in particular, for W-CDMA systems. In this method, the knowledge of the user of interest, and some statistical knowledge of interfering transmitters' signals are used to detect the desired user's signal without needing exact "a priori" knowledge of the interfering signal parameters such as spreading sequences and signal powers. Parameters of the proposed processor, which are derived so as to maximise the signal-to-interference-plus-noise ratio (SINR), can generally be obtained by solving a system of linear equations for which many effective techniques exist. A model for this detection procedure is developed and shown--through analytical and numerical results--to offer a good compromise between complexity and quality of performance.

A high speed 3D shape reconstruction method with multiple video cameras and multiple computers on LAN is presented. The video cameras are set to surround the real 3D space where people exist. Reconstructed 3D space is displayed in voxel format and users can see the space from any viewpoint with a VR viewer. We implemented a prototype system that can work out the 3D reconstruction with the speed of 10.55 fps in 313 ms delay.

The orbital portrait of quasi-periodic oscillation shows transition like change with the amplitude of external force in periodically forced van der Pol oscillator. This phenomenon originates from frequency pulling between self-sustained and periodic external oscillations induced by the frequency shift of former. We estimate this shift and succeed in deriving the transition points at which the portrait changes.

Polymeric thin films can be prepared by physical vapor deposition in several manners such as direct evaporation of the polymer, co-evaporation of two monomers followed by polyaddition or polycondensation reaction, or evaporation of single monomer followed by chain polymerization. The ionization-assisted deposition (IAD) was proposed as a new method of polymer deposition that has special features such as activation of polymerization reaction and aligning of the dipole orientation. These mechanisms were utilized for the formation of vinyl polymer and polyurea thin films aiming for such applications as organic light emitting diodes and piezoelectric devices.

The visual inspection of printed circuit boards (PCBs) at the final production stage is necessary for quality assurance and the requirements for an automated inspection system are very high. However, consistent inspection of patterns on these PCBs is very difficult due to pattern complexity. Most of the previously developed techniques are not sensitive enough to detect defects in complex patterns. To solve this problem, we propose a new optical system that discriminates pattern types existing on a PCB, such as copper, solder resist and silk-screen printing. We have also developed a hybrid defect detection technique to inspect discriminated patterns. This technique is based on shape measurement and features extraction methods. We used the proposed techniques in an actual automated inspection system, realizing real time transactions with a combination of hardware equipped with image processing LSIs and PC software. Evaluation with this inspection system ensures a 100% defect detection rate and a fairly low false alarm rate (0.06%). The present paper describes the inspection algorithm and briefly explains the automated inspection system.

Mobile computing networks make it possible to offer information access to mobile users. In order to transfer data over mobile networks efficiently, appropriate data transmission control methods for mobile terminals must be established. This paper focuses on spot communication systems to transmit data at high speeds between base stations and mobile terminals. It proposes a flexible and efficient data transmission method that is suitable for spot communication systems. The proposed method transfers subsets of the data to the base stations that are best sited relative to the mobile terminal. This helps to reduce the traffic load of the network significantly. Simulation results confirm the validity of the proposed method. Furthermore, the data receiving time of the mobile terminal, which is an important measure in evaluating the Quality of Service (QoS) for data transmission is analyzed. The result shows that the traffic load in the network is reduced significantly while the QoS is well maintained.

This paper theoretically analyzed the performance of the RAKE combining (in the time domain), maximal ratio combining (in the spatial domain), and two-dimensional RAKE combining (in the spatial and time domains) techniques for multipath fading environments, where multipath waves are distributed in the spatial and time domains. The analysis was based on a diversity combining technique that employed the eigenvalues of the covariance matrix between branch signals. It was found that the performance of the fading mitigation was normalized by the beamwidth of an array antenna, for various parameters such as the number of antenna elements, angular spread, and angle of arrival.

In long-haul wavelength-division-multiplexed (WDM) transmission systems, signals with shorter and longer wavelengths have self-phase modulation group-velocity-dispersion (SPM-GVD) penalty caused by to the dispersion slope even after the dispersion-compensation at the receiver has been optimized. As a countermeasure, we have already proposed both pre-compensation and post-compensation of chromatic dispersion at the transmitter and receiver for each channel. This method can decrease the channel variation of path-averaged chromatic dispersion along the transmission line, and it can improve the eye opening of the waveform after transmission. We investigated the optimized parameter of chromatic dispersion and chirping at the transmitter. The optimized pre-dispersion compensation parameter R was about 50%. The optimized chirping parameter α was about 3 when the signal wavelength was less than the mean zero-dispersion wavelength. In a single-channel, 5.3-Gbit/s NRZ signal transmission experiment over a 4,760-km straight line, this method decreased SPM-GVD penalty. In a 32-channel, 5.3-Gbit/s WDM transmission experiment over 9,879 km using a circulating loop, this method improved Q-factors for the 1st and 32nd channels by more than 1.5 dB.

Site diversity causes unfairness in packet reception that depends on the location of the mobile stations in the up-link of CDMA cellular packet communication systems. This paper proposes an adaptive transmit permission probability control scheme that reduces this unfairness in CDMA cellular slotted-ALOHA systems with site diversity. The proposed scheme adaptively controls the transmit permission probability according to the offered load and the location of the mobile stations. Successful packet reception rate, fairness coefficient and throughput performance are evaluated in fading environments with imperfect power control. Computer simulation shows that adaptive transmit permission probability control improves fairness of service for all mobile stations and throughput performance across all channel loads compared with the conventional scheme.

We propose a new sampling control system on image sensor array. Contrary to the random access pixels, the proposed sensor is able to read out spatially variant sampled pixels at high speed, without inputting pixel address for each access. The sampling positions can be changed dynamically by rewriting the sampling position memory. The proposed sensor has a memory array that stores the sampling positions. It can achieve any spatially varying sampling patterns. A prototype of 64 64 pixels are fabricated under 0.7 µm CMOS precess.

To provide a bounded-delay service with an end-to-end delay guarantee and utilize network efficiently, the admission control functions in a network require an adequate per-switch delay allocation policy to allocate end-to-end delay requirement to a set of local switches. This letter present an optimal delay allocation policy, according to a deterministic traffic model, and a rate-controlled scheduler. Empirical results indicate that the proposed policy perform better than EQ allocation policy, using the admission load region as index.

In industrial assembly lines, seam sealing is a painting process used for making watertight seals or for preventing rusting. In the process, sealant is painted on seams located at the joints of pressed metal parts. We developed a sealing robot system that adjusts the sealing gun motion adaptively to the seam position sensed by a range sensor (a scanning laser rangefinder which senses profile range data). In this paper, we propose a high-speed and highly reliable algorithm for seam position computation from the sensed profile range data around the seam. It is proved experimentally that the sealing robot system used with the developed algorithm is very effective, especially for reducing wasted sealant.

Vanadyl-phthalocyanine (VOPc) single crystals were prepared on KBr substrate by molecular beam epitaxy (MBE). Their maximum size is 1380.16 µm3. The morphology of the VOPc single crystal was investigated from the results of UV/VIS spectra and RHEED. They suggest that the VOPc single crystal may be grown with pseudomorphic layers. The growing process was expained by Volmer-Weber model. The third order nonlinear optical property of VOPc single crystal was measured with Maker fringe method. The value of the third order optical susceptibility (χ(3)) of VOPc single crystal was estimated to be about 10-9 esu from the result of Maker fringe.

We have fabricated a static induction transistor structure by using copper phthalocyanine (CuPc) films. Its layer-structure is Au(drain)/CuPc/Al(gate)/CuPc/Au(source)/glass. The source-drain current is controlled by the Al gate bias-voltage when the drain voltage is positive but is almost independent of it when the drain voltage is negative. The current-voltage characteristics are governed by the space-charge-limited conduction which depends on shallow traps.

As a flexible way to accommodate a variety of services, a number of spreading bands are now considered in International Mobile Telecommunications-2000 (IMT-2000) systems and more than two (overlaid) bands can be operated simultaneously in CDMA systems. Capacity estimation in CDMA systems is an important issue in performance analysis and call admission control (CAC), which is closely related to power control. This study derives the reverse link capacity of signal-to-interference ratio (SIR)-based power-controlled overlaid multiband CDMA systems in single and multiple cell environments. The weighted-aggregated data rate is introduced as the link capacity, which can reflect different spreading bandwidths and different QoS requirements. Various combinations of 5, 10, and 20 MHz subsystems are compared to one another in view of the maximum weighted-aggregated data rate. The impact of pulse shaping on CAC and the effect of multiple traffic accommodation on link capacity are also investigated.

In this study, we prepared red organic light- emitting-diode (OLED) with a fluorescent dye(Sq)-doped and inserted 1,3-bis (5-p-t-butylphenyl)-1,3,4-oxadiazol-2-yl) benzene (OXD7) or/and tris (8-hydroxyquinoline) aluminum (Alq3) layers between emission layer and cathode in order to increase electroluminescent (EL) efficiency. This inserting effect has been observed and EL mechanism characteristics have been examined. The hole transport layer was N,N'-diphenyl-N, N'bis-(3-methylphenyl)-1,1'diphenyl-4,4'-diamine (TPD); the host material of emission layer was Alq3; the guest material of emission layer was Sq. When Alq3 was inserted between the emission layer and the cathode, emission efficiency increased. Highly pure red emission, however, was not attaina ble with Alq3. On the other hand, the insertion of OXD7 between the two layers blocked and accumulated holes. Because of its increasing recombination probability of electron and hole, luminance characteristics and emission efficiency were improved with holding highly pure red color.

This paper deals with the fundamental problem of automatic assessment of appearance of seam puckers on suits, and suggests possibilities for practical usage. Presently, evaluations are done by inspectors who compare standard photographs of suits to test samples. In order to avoid human errors, however, a method of automatic evaluation is desired. We process the problem as pattern recognition. As a feature we use fractal dimensions. The fractal dimensions obtained from standard photographs are used as template patterns. To make it easier to calculate fractal dimensions, we plot a curve representing the appearance of seam puckers, from which fractal dimensions of the curve can be calculated. The seam puckers in gray-scale images are confused with the material's texture, so the seam puckers must be enhanced for a precise evaluation. By using the concept of variance, we select images with seam puckers and enhance only the images with seam puckers. This is the novel aspect of this work. Twenty suits are used for the evaluation experiment and we obtain a result almost the same to the evaluation gained by inspection. That is, the evaluation of 11 samples is the same as that gained by inspection, the results of 8 samples differ by 1 grade, and the evaluation of 1 sample has a 2-grade difference. The results are also compared to the evaluation of the system using the Daubechies wavelet feature. The result of comparison shows that the present method gives a better evaluation than the system using the Daubechies wavelet.

A number of parallel algorithms have been developed to solve large-scale real world problems. Although there has been much work on the design of parallel algorithms, there has been little on the design of languages for expressing these algorithms. This paper describes the BPL, a new parallel language designed for butterfly networks. The purpose of this language is to help designers in hiding the complexity of the algorithm and leaving details of mapping between data and processors for lower level. BPL provides a simpler virtual machine for the designer , in order to avoid thinking about control of processors and data. From another point of view, BPL helps designer to logically check the algorithm and correct any possible error in it. The paper gives some examples implemented by this language. In addition, we have also implemented a software tool which simulates the running of the algorithm on the network. The results lead us to believe that this language would be useful in representing all kinds of algorithms on this network including normal algorithms and others.

We present a new basis for discrete representation of stereo correspondence. This center referenced basis permits a more natural, complete and concise representation of constraints in stereo matching. In this context a MAP formulation for disparity estimation is derived and reduced to unconstrained minimization of an energy function. Incorporating natural constraints, the problem is simplified to the shortest path problem in a sparsely connected trellis structure which is performed by an efficient dynamic programing algorithm. The computational complexity is the same as the best of other dynamic programming methods, but a very high degree of concurrency is possible in the algorithm making it suitable for implementation with parallel procesors. Experimental results confirm the performance of this method and matching errors are found to degrade gracefully in exponential form with respect to noise.