This paper presents the dual-band bandpass filters (BPFs) design composed of λ/2 and symmetrically/asymmetrically paired λ/4 stepped impedance resonators (SIRs) for the WLAN applications. The filters cover both the operating frequencies of 2.45 and 5.2 GHz. The dual-coupling mechanism is used in the filter design to provide alternative routes for signals of selected frequencies. A prototype filter is composed of λ/2 and symmetrical λ/4 SIRs. The enhanced wide-stopband filter is then developed from the filter with the symmetrical λ/4 SIRs replaced by the asymmetrical ones. The asymmetrical λ/4 SIRs have their higher resonances frequencies isolated from the adjacent I/O SIRs and extend the enhanced filter an upper stopband limit beyond ten time the fundamental frequency. Also, the filter might possess a cross-coupling structure which introduces transmission zeros by the passband edges to improve the signal selectivity. The tapped-line feed is adopted in this circuit to create additional attenuation poles for improving the stopband rejection levels. Experiments are conducted to verify the circuit performance.

In this Letter, a robust system identification method is proposed for the generalized sidelobe canceller using dual microphones. The conventional transfer-function generalized sidelobe canceller employs the non-stationarity characteristics of the speech signal to estimate the relative transfer function and thus is difficult to apply when the noise is also non-stationary. Under the assumption of W-disjoint orthogonality between the speech and the non-stationary noise, the proposed algorithm finds the speech-dominant time-frequency bins of the input signal by inspecting the system output and the inter-microphone time delay. Only these bins are used to estimate the relative transfer function, so reliable estimates can be obtained under non-stationary noise conditions. The experimental results show that the proposed algorithm significantly improves the performance of the transfer-function generalized sidelobe canceller, while only sustaining a modest estimation error in adverse non-stationary noise environments.

The cognitive radio technique promises to manage and allocate the scarce radio spectrum in the highly varying and disparate modern environments. This paper considers a cognitive radio scenario composed of two queues for the primary (licensed) users and cognitive (unlicensed) users. According to the Markov process, the system state equations are derived and an optimization model for the system is proposed. Next, the system performance is evaluated by calculations which show the rationality of our system model. Furthermore, discussions among different parameters for the system are presented based on the experimental results.

The paper introduces both high-speed transmission and quality of system to offer the Internet services on a HFC (Hybrid Fiber Coaxial) network. This utilizes modulating the phase and the amplitude to the signal of the IPMS (Internet Protocol Multicasting Service). An IP-cable transmitter, IP-cable modem, and IP-cable management servers that support 30-Mbps IPMS on the HFC were developed. The system provides a 21 Mbps HDTV transporting stream on a cable TV network. It can sustain a clear screen for a long time.

We investigate numerically the applicability of photonic crystal fiber (PCF) with a uniform air hole structure as a wide-band transmission medium. We show that accumulated dispersion over the PCF can be reduced effectively by optimizing the index profile of dispersion compensating fiber (DCF). We also show that a bandwidth of more than 300 nm will be available for 40 Gbit/s NRZ transmission by using the PCF as a transmission medium instead of conventional 1.3 µm zero-dispersion single-mode fiber (SMF).

The GMM-UBM framework has been proved to be one of the most effective approaches to the automatic speaker verification (ASV) task in recent years. In this letter, we first propose an approximate decision function of traditional GMM-UBM, from which it is shown that the contribution to classification of each Gaussian component is equally important. However, research in speaker perception shows that a different speech sound unit defined by Gaussian component makes a different contribution to speaker verification. This motivates us to emphasize some sound units which have discriminability between speakers while de-emphasize the speech sound units which contain little information for speaker verification. Experiments on 2006 NIST SRE core task show that the proposed approach outperforms traditional GMM-UBM approach in classification accuracy.

In this letter, we propose a speech reinforcement technique based on soft decision under both the far-end and near-end noise environments. We amplify the estimated clean speech signal at the far-end based on the estimated ambient noise spectrum at the near-end, as opposed to reinforcing the noisy far-end speech signal, so that it can be heard more intelligibly in far-end noisy environments. To obtain an effective reinforcement technique, we adopt the soft decision scheme incorporating a speech absence probability (SAP) in the frequency dependent signal-to-noise ratio (SNR) recovery method where the clean speech spectrum is estimated and the reinforcement gain is inherently derived and modified within the unified framework. Performance of the proposed method is evaluated by a subjective testing under various noisy environments. This is an improvement over previous approaches.

One of the most important challenges in speaker recognition is intersession variability (ISV), primarily cross-channel effects. Recent NIST speaker recognition evaluations (SRE) include a multilingual scenario with training conversations involving multilingual speakers collected in a number of other languages, leading to further performance decline. One important reason for this is that more and more researchers are using phonetic clustering to introduce high level information to improve speaker recognition. But such language dependent methods do not work well in multilingual conditions. In this paper, we study both language and channel mismatch using a support vector machine (SVM) speaker recognition system. Maximum likelihood linear regression (MLLR) transforms adapting a universal background model (UBM) are adopted as features. We first introduce a novel language independent statistical binary-decision tree to reduce multi-language effects, and compare this data-driven approach with a traditional knowledge based one. We also construct a framework for channel compensation using feature-domain latent factor analysis (LFA) and MLLR supervector kernel-based nuisance attribute projection (NAP) in the model-domain. Results on the NIST SRE 2006 1conv4w-1conv4w/mic corpus show significant improvement. We also compare our compensated MLLR-SVM system with state-of-the-art cepstral Gaussian mixture and SVM systems, and combine them for a further improvement.

In this paper, a new approach to channel order selection of single-input multiple-output (SIMO), finite impulse response (FIR) channels is proposed for blind channel estimation. The approach utilizes cross spectral density (CSD) of the channel outputs, and minimizes the distance between two CSD's, one calculated non-parametrically from the observed output data, and the other calculated from the blindly estimated channel parameters. The CSD criterion is numerically tested on randomly generated SIMO-FIR channels, and shown to be very effective compared to existing channel order selection methods especially under low SNR settings. Blind estimates of the channels with the selected channel order also show superiority of the CSD criterion.

Input/Output (I/O) automata and the Temporal Logic of Actions (TLA) are two well-known techniques for the specification and verification of concurrent systems. Over the past few years, they have been extended to the so-called dynamic I/O automata and, respectively, Mobile TLA (MTLA) in order to be more appropriate for mobile agent systems. Dynamic I/O automata is just a mathematical model, whereas MTLA is a logic with a formally defined language. In this paper, therefore, we investigate how MTLA could be used as a formal language for the specification of dynamic I/O automata. We do this by writing an MTLA specification of a travel agent system which has been specified semi-formally in the literature on that model. In this specification, we deal with always existing agents as well as with an initially unknown number of dynamically created agents, with mobile and non-mobile agents, with I/O-automata-style communication, and with the changing communication capabilities of mobile agents. We have previously written a TLA specification of this system. This paper shows that an MTLA specification of such a system can be more elegant and faithful to the dynamic I/O automata definition because the agent existence and location can be expressed directly by using agent and location names instead of special variables as in TLA. It also shows how the reuse of names for dynamically created and destroyed agents within the dynamic I/O automata framework can be specified in MTLA.

Adaptive polarization mode dispersion (PMD) compensation is required for the speed-up and advancement of the present optical communications. The combination of a tunable PMD compensator and its adaptive control method achieves adaptive PMD compensation. In this paper, we report an effective search control algorithm for the feedback control of the PMD compensator. The algorithm is based on the hill-climbing method. However, the step size changes randomly to prevent the convergence from being trapped at a local maximum or a flat, unlike the conventional hill-climbing method. The randomness depends on the Gaussian probability density functions. We conducted transmission simulations at 160 Gb/s and the results show that the proposed method provides more optimal compensator control than the conventional hill-climbing method.

Break arcs are generated between silver electrical contacts in a DC 42 V-10 A resistive circuit. Break arcs are driven by the radial magnetic field. The magnetic field is formed between the electrical contacts with a permanent magnet embedded in the cathode. The arc motion is taken with a high-speed camera and contact surfaces are observed after break operations. Experimental results with the magnet are compared with those without the magnet to confirm the effect of the embedded magnet. For break operations with the magnet following results are shown. Break arcs are rotationally driven by the radial magnetic field in the direction according to Lorentz force. The shortening effect of the arc duration is confirmed. The traces of the arc spots on the contact surfaces are ring-shaped, wide and uniform. This result shows the prevention effect of local erosion of electrical contacts. The rotational frequency of the break arc depends on the Lorentz force with the radial magnetic field.

It is necessary to know how the contact voltage and contact area vary with time to clarify the physics of contact lifetime and contact resistance. In this paper, to clarify the effect of the heating value on the diameter of the contact area, the variations of the contact voltage and contact diameter with time are measured at a low-speed breaking contact near the thermal equilibrium condition under which a stable bridge is generated. The effect of the heating value on the relationship between the contact diameter and the length of the bridge at breaking is also discussed. In the results, the contact voltage waveform was found to be macroscopically proportional to the displacement of the moving electrode lc. On the other hand, the contact diameter dc decreased slightly with increasing lc. At all currents investigated dc decreased when lc increased. The length of the bridge at breaking was increased by increasing the current. A large heating value of the contact area resulted in a long bridge because the volume of the melted metal increases.

A spectrum sharing method is proposed for systems that share the same frequency band or adjacent bands with services that have different priorities. The proposed method adaptively controls transmission power according to information provided by the high-priority system receivers. We give the theoretical capacities achieved by low-priority systems when the proposed method and a conventional method (constant transmit power) are applied. Numerical results confirm that the proposed method attains 1.5-2 times larger capacity than the conventional method.

This paper proposes a method of low complexity speech mixing with speech codecs based on predictive coding for multimedia conferences. The proposed method applies a filter state management (FSM) technique to a partial mixing method in order to avoid inconsistency of the filter states of encoders. The inconsistency is created by switching of the encoders when the speakers to be mixed are switched. The results of subjective evaluations of speech quality show that the proposed method avoids the inconsistency, and achieves significantly higher speech quality than the conventional partial mixing method without the FSM and almost the same speech quality as the full mixing method. The complexity evaluation results show that the proposed method achieves much lower complexity than the full mixing method.

In this letter, we analyze the convergence speed of layered decoding of block-type low-density parity-check codes and verify that the layered decoding gives faster convergence speed than the sequential decoding with randomly selected check node subsets. Also, it is shown that using more subsets than the maximum variable node degree does not improve the convergence speed.

In this paper, a spectral domain method named the SDF (Spectral Density Fitting) method for intra-die spatial correlation function extraction is presented. Based on theoretical analysis of random field, the spectral density, as the spectral domain counterpart of correlation function, is employed to estimate the parameters of the correlation function effectively in the spectral domain. Compared with the existing extraction algorithm in the original spatial domain, the SDF method can obtain the same quality of results in the spectral domain. In actual measurement process, the unavoidable measurement error with arbitrary frequency components would greatly confound the extraction results. A filtering technique is further developed to diminish the high frequency components of the measurement error and recover the data from noise contamination for parameter estimation. Experimental results have shown that the SDF method is practical and stable.

We have developed InGaAs-based VCSELs operating around 1.1 µm for high-speed optical interconnections. By applying GaAsP barrier layers, temperature characteristics were considerably improved compared to GaAs barrier layers. As a result, 25 Gbps 100 error-free operation was achieved. These devices also exhibited high reliability. No degradation was observed over 3,000 hours under operation temperature of 150 and current density of 19 kA/cm2. We also developed VCSELs with tunnel junctions for higher speed operation. High modulation bandwidth of 24 GHz and a relaxation oscillation frequency of 27 GHz were achieved. 40 Gbps error-free operation was also demonstrated.

A critical problem after a natural/manmade disaster is to provide immediate post-disaster communication links between the disaster victims and some overlay networks. This paper proposes a novel scheme that uses the surviving Mobile handSets (MS) as sensing nodes to form an auto-configured Hierarchical Cognitive Radio Network (H-CRN). The implementation of this H-CRN is explained through detailed problem scenario statement and step-by-step implementation of automatic identification of emergency situation by the MS nodes. An overview of the cross-layer framework used by the MS nodes is also presented. This novel scheme is tested through some hypothesis along with probability calculations for successful identification of emergency situation, formation of ad hoc group and Emergency Beacon Message (EBM) transmission.

We present our recent work on monolithically integrated devices comprising a variety of functional elements such as high speed optical transmitters and receivers, electro-absorption modulators integrated with tunable dispersion compensators and fast-tunable wavelength converters.