In this letter, we propose an enhanced gentle distributed coordination function (GDCF), which is a simple and effective collision resolution mechanism, to improve the performance of IEEE 802.11 DCF. We compare performance of the enhanced GDCF with that of the legacy DCF and the conventional GDCF via analysis and simulations. The enhanced GDCF introduces a new counter to check the number of consecutively successful transmissions, and the maximum permitted values of the counter differ for different backoff stages. The proposed GDCF is shown to have performance superior to that of the conventional GDCF for various combinations of contending stations and frame length.

We propose an accurate and efficient model of having an unbalanced differential line structure, where mode-conversion and frequency dependent loss effects are considered in above the GHz frequency range. To extract model parameters of the proposed unbalanced differential line model, we measured s-parameters of test patterns using a 2-port VNA and defined a new type of mixed-mode s-parameter. The model parameters were obtained and are described for various types of the unbalanced differential line structures. Finally, the validity of the proposed model and the model parameters were successfully confirmed by a series of time-domain measurements and a lattice diagram analysis.

The authors propose a system for searching the shape of human hands and fingers in real time and with high accuracy, without using any special peripheral equipment such as range sensor, PC cluster, etc., by a method of retrieving similar image quickly with high accuracy from a large volume of image database containing the complicated shapes and self-occlusions. In designing the system, we constructed a database in a way to be adaptable even to differences among individuals, and searched CG images of hand similar to unknown hand image, through extraction of characteristics using high-order local autocorrelational patterns, reduction of the amount of characteristics centering on principal component analysis, and prior rearrangement of data corresponding to the amount of characteristics. As a result of experiments, our system performed high-accuracy estimation of human hand shape where mean error was 7 degrees in finger joint angles, with the processing speed of 30 fps or over.

In this letter, we present a space division multiple access (SDMA) approach for IEEE802.11a-based system employing pre-fast Fourier transform (FFT) adaptive array antenna (AAA) at base station (BS). As the core idea, we propose a preamble subcarrier assignment method to generate different preambles for different users using the same signal burst structure defined by IEEE802.11a, by which BS can effectively distinguish each user from other users and accurately estimate the channel impulse response (CIR) for each user. In this way, SDMA can be easily realized with no significant change in IEEE802.11a-based system. The performance of the proposed SDMA system is evaluated by computer simulation using a realistic spatio-temporal indoor wireless channel model.

OFDM-based networks utilizing the frequency reuse factor of 1 may produce the severe ICI (intercell interference) at the cell boundary even though overall cell capacity is increased and network deployment is facilitated. In the forward-link, the ICI may rise above a QoS (quality of service) threshold beyond some distance from BSs (base stations). In this paper, we analyze the forward-link capacity of an MC-CDMA system as a function of the ICI according to the distance from a cell. To achieve this goal, a closed form of the outage probability is derived and utilized to obtain the accommodated number of users and system parameters.

A T user multiple access collision channel without feedback is considered where the channel inputs are called packets. The packets take values from non-binary input alphabet. It is supposed that at most M users are active, i.e., are communicating simultaneously (2 M T). We are looking for codes and protocol sequences of users of minimum length such that from the output of the channel it can be determined which users were active, what were their synchron positions, and what they sent.

We studied 10 Gbit/s-based time-spreading and wave-length-hopping (TS-WH) optical code division multiplexing (OCDM) using fiber Bragg gratings (FBGs). To apply it to such the high bit rate system more than ten gigabit, two techniques are adopted. One is encoding with the maximum spreading time of 400 ps, which is four times as data bit duration, to encode without shortening chip duration. Another is encoder design. The apodized refractive index profile to the unit-gratings composing the encoder is designed to encode the pulses with 10-20 ps width at 10 Gbit/s rate. Using these techniques, 210 Gbit/s OCDM is demonstrated successfully. In this scheme, transmission distance is limited due to dispersion effect because the signal has wide bandwidth to assign a wavelength-hopping pattern. We use no additional devices to compensate the dispersion, in order to construct simple and cost-effective system. Novel FBG encoder is designed to incorporate both encoding and compensating of group delay among chip pulses within one device. We confirm the extension of transmission distance in the TS-WH OCDM from the demonstration over 40 km-long single mode fiber.

Principal Component Analysis (PCA) has been applied in various areas such as pattern recognition and data compression. In some cases, however, PCA does not extract the characteristics of the data-distribution efficiently. In order to overcome this problem, we have proposed a novel method of Nonlinear PCA which preserves the order of the principal components. In this paper, we reduce the dimensionality of image data using the proposed method, and examine its effectiveness in the compression and recognition of images.

This paper presents designs and performances of 76 GHz band alternating-phase fed single-layer slotted waveguide arrays. Two kinds of design, that is, uniform aperture illumination for maximum gain and Taylor distribution for sidelobe suppression of -25 dB, are conducted. High gain and high efficiency performance of 34.8 dBi with 57% is achieved for the former, while satisfactory sidelobe suppression of -20 dB in the H-plane and -23 dB in the E-plane with high efficiency is confirmed for the latter. The simple structure dispensing with electrical contact between the slotted plate and the groove feed structure is the key advantage of alternating-phase fed arrays and the slotted plate is just tacked on the feed structure with screws at the periphery. High gain and high efficiency performances predicted theoretically as well as design flexibility of the alternating-phase fed array are demonstrated in the millimeter wave frequency.

Most of analytical models proposed so far for the IEEE 802.11 distributed coordination function (DCF) focus on saturation performance. In this paper, we develop an analytic model for unsaturation performance evaluation of the IEEE 802.11 DCF with and without slow contention window decrease (SCWD). The model explicitly takes into account the carrier sensing mechanism and an additional backoff interval after successful frame transmission, both of which can be ignored under saturation conditions. Expressions are derived for throughput and delay characteristics by means of the equilibrium point analysis. The accuracy of our model is validated through computer simulation. Numerical results based on the IEEE 802.11b with CCK show that the SCWD can stably achieve approximately 20% performance gain over the normal 802.11 DCF under unsaturation conditions as well as saturation ones.

A higher mode tri-plate strip transmission line, in which the first higher mode propagates, was developed to realize mass production of millimeter-wave integrated circuits for application in intelligent transport systems, and its transmission characteristics were investigated. The design diagram of this guided mode was determined and a higher mode tri-plate strip transmission line was fabricated at 30 GHz. The dispersion curve was found to be similar to that of a rectangular waveguide and a low transmission loss of less than 10 dB/m was obtained. For construction of some functional devices, two types of basic reactance components, such as a gap and a slot, were expressed by equivalent circuits. The former was expressed by capacitive parameters, and the latter was expressed by an ideal transformer with inductive parameters. The gap-coupled circuit was successfully employed for a 3-pole 0.1 dB Chebyshev ripple band-pass filter with a small excess insertion loss of less than 1 dB at a center frequency of 32 GHz, as well as no spurious response in a bandwidth from 26.5 GHz to 40 GHz. The slot element acted as a matching circuit and a suppressor of the lowest mode, which is the TEM mode in the tri-plate strip transmission line. Moreover, this element was applied to a mode transformer between the lowest mode and the first higher mode.

The purpose of this paper is to improve a feedback-type adaptive array antenna (AAA) with feedback information quantized by one bit which was presented recently on TDMA system by an author of this paper. The improvement is made by using adaptive, instead of constant, update size of adaptive antenna weights control. Computer simulation results show that the performance of this system is improved to be almost equivalent to the performance of a system without quantization of the feedback information for wide range of fading speed. The results include the effect of control delay time and the maximum Doppler frequency under flat fading and frequency-selective fading.

In order to solve large Multidimensional Knapsack problems we examine a technique which decomposes a problem instance into two parts. The first part is solved using a traditional technique, such as Dynamic Programming, to reduce the number of variables in the problem by creating a single variable with many non-dominated states. In the second part the remaining variables are determined by an algorithm that repeatedly enumerates them with different constraint and objective requirements. The constraint and objective requirements are imposed by the various non-dominated states of the variable created in the first part of this technique. The main advantage of this approach is that when memory requirements prevent traditional techniques solving a problem instance, the enumeration provides a much less memory-intensive method, enabling a solution to be found. Two approaches are proposed for repeatedly enumerating a 0/1 Multidimensional Knapsack problem. It is demonstrated how these enumeration methods, in conjunction with the Modular Approach, were used to find the optimal solutions to a number of 500-variable, 5-constraint Multidimensional Knapsack problem instances proposed in the literature. The exact solutions to these instances were previously unknown.

A rate splitting algorithm is presented for a multiple video transmission system to transfer the aggregation (or statical multiplexing) of multiple video streams to multiple clients so that each client can receive the requested video stream with the reliable fidelity. Computer simulations for transmission of a set of 128 MPEG compressed video streams show that the proposed algorithm alleviates the variability of the aggregate video transmission comparing with a scheme to smooth individually each of videos using the traditional online smoothing algorithm. Besides, the proposed is 2 time faster than the traditional one.

The letter presents an analysis of bit error probability for trellis coded 8-ary phase shift keying moduation with 2-state soft decision Viterbi decoding. It is shown that exact numerical error performance can be obtained for low singal-to-noise power ratio where bounds are useless.

A novel phase error correction scheme is proposed for the high rate OFDM-based wireless local area networks (WLANs). The proposed scheme makes the system capable of efficiently compensating the whole phase error due to the residual sampling clock offset and frequency offset estimation error after timing and frequency offset compensation, as well as the phase noise.

Genetic Algorithms (GA) provide an attractive approach to solving the challenging problem of dynamic routing and wavelength assignment (RWA) in optical Wavelength Division Multiplexing (WDM) networks, because they usually achieve a significantly low blocking probability. Available GA-based dynamic RWA algorithms were designed mainly for WDM networks with a wavelength continuity constraint, and they cannot be applied directly to WDM networks with wavelength conversion capability. Furthermore, the available GA-based dynamic RWA algorithms suffer from the problem of requiring a very time consuming process to generate the first population of routes for a request, which may results in a significantly large delay in path setup. In this paper, we study the dynamic RWA problem in WDM networks with sparse wavelength conversion and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and GA. By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously update the routing tables, the new hybrid algorithm can promptly determine the first population of routes for a new request based on the routing table of its source node, without requiring the time consuming process associated with current GA-based dynamic RWA algorithms. To achieve a good load balance in WDM networks with sparse wavelength conversion, we adopt in our hybrid algorithm a new reproduction scheme and a new fitness function that simultaneously takes into account the path length, number of free wavelengths, and wavelength conversion capability in route selection. Our new hybrid algorithm achieves a better load balance and results in a significantly lower blocking probability than does the Fixed-Alternate routing algorithm, both for optical networks with sparse and full-range wavelength converters and for optical networks with sparse and limited-range wavelength converters. This was verified by an extensive simulation study on the ns-2 network simulator and two typical network topologies. The ability to guarantee both a low blocking probability and a small setup delay makes the new hybrid dynamic RWA algorithm very attractive for current optical circuit switching networks and also for the next generation optical burst switching networks.

The issue of importance of multiuser detection for CDMA-based mobile ad hoc networks is addressed in this paper. For conventional scheme, each terminal in the network uses matched filter to receive packets, so the performance (e.g., throughput) of the network suffers from multi-access interference (MAI). Different from above scheme, in this paper, each terminal of the ad hoc network is equipped with an adaptive blind linear multiuser detector, so the ability of MAI-resistance is gained. Employing slotted-ALOHA protocol in MAC layer and using fully-connected network model, the throughput of ad hoc network is studied. Theoretic analysis and simulation results show that multiuser detection can remarkably improve throughput performance of ad hoc networks.

In this paper, we propose an agent architecture for a combination of speculative computation and abduction. Speculative computation is a tentative computation when complete information for performing computation is not obtained. We use a default value to complement such incomplete information. Unlike usual default reasoning, the real value for the information can be obtained during the computation and the computation can be revised on the fly. In the previous work, we applied this technique to handling distributed problem solving under incomplete communication environments in the context of multi-agent systems and proposed correct procedures in abductive logic programming in terms of perfect model semantics. In the previous work, however, we regarded assumptions as defaults and used these assumptions for speculative computation. Thus, we could not perform hypothetical reasoning, that is, the original usage of abduction. In this paper, we extend our framework so that speculative computation and abduction can be both performed. As a result, our procedure becomes an extension of the abductive procedure developed by Kakas and Mancarella augmented by dynamic belief revision mechanism about outside world.

This paper presents a low-complexity equalization for M-ary biorthogonal keying based direct sequence ultra wideband (MBOK DS-UWB) systems. We focus on a Viterbi equalizer, which is based on maximum likelihood sequence estimation (MLSE). To reduce the computational complexity of MLSE-based equalizer, we use two strategies. One is the use of delayed-decision feedback sequence estimation (DDFSE), which is a hybrid estimation between MLSE and decision feedback estimation (DFE). And the other is the truncation of state transition in MLSE by considering MBOK pulse mapping. The reduced complexity sequence estimation is named as reduced state (RS)-DDFSE. By the use of RS-DDFSE, the complexity of Viterbi equalizer for MBOK DS-UWB is significantly reduced, by comparison with that of MLSE. The performance of RS-DDFSE based equalizer is evaluated on multipath fading channel models provided by IEEE802.15.3a. An analysis on trellis diagram of RS-DDFSE and simulation results show that the impact on error rate performance generated by the complexity lower is slight.