In this paper, the authors derived the distributions of the probability of detection and of false alarm in function of the decision threshold. An Optimized Threshold Decision (OTD) algorithm was proposed to decide the optimal threshold for reaching the best system performance in a given known channel noise. By applying this OTD algorithm, the multiple access capacity can thus be maximized.

This paper presents a new neural network structure, called Temporal-CombNET (T-CombNET), dedicated to the time series analysis and classification. It has been developed from a large scale Neural Network structure, CombNET-II, which is designed to deal with a very large vocabulary, such as Japanese character recognition. Our specific modifications of the original CombNET-II model allow it to do temporal analysis, and to be used in large set of human movements recognition system. In T-CombNET structure one of most important parameter to be set is the space division criterion. In this paper we analyze some practical approaches and present an Interclass Distance Measurement based criterion. The T-CombNET performance is analyzed applying to in a practical problem, Japanese Kana finger spelling recognition. The obtained results show a superior recognition rate when compared to different neural network structures, such as Multi-Layer Perceptron, Learning Vector Quantization, Elman and Jordan Partially Recurrent Neural Networks, CombNET-II, k-NN, and the proposed T-CombNET structure.

The execution model of mobile code inherits from traditional remote execution model such as telnet that needs two conditions. First, the proper program must exist in advance in the remote system. Second, there should be a process in the remote system waiting for requests. Therefore mobile code also bears the same conditions in order to be executed in a remote system. But these conditions constrain an important aspect of mobile code, which is the dynamic extension of system functionality. In this paper we propose a new approach, named Function Message that enables remote execution without these two conditions. Therefore, Function Message makes it easy and natural for mobile codes to extend system functionality dynamically. This paper describes the design of Function Message and implementation on Linux. We measure the overhead of Function Message and verify its usefulness with experimental results. On the ATM network, Function Message can be about five times faster than the traditional remote execution model based on exec().

The Real-time VLBI Correlator (RVC) is a new type processor for the Very-Long-Baseline Interferometry (VLBI). This correlator was primarily designed for supporting the VLBI Space Observatory Programme (VSOP). Two particular techniques, the fringe rotator after correlation and the lag-time extension technique, are newly developed for the RVC. The correlation circuit size of VLBI correlator is reduced to half by introducing the new fringe rotator, and it makes possible to realize a large delay window being essential in finding a cross correlation in real-time. The delay window can be changed flexibly with the lag-time extension technique, and its technique is useful to detect the fringe peak in a VSOP observation. The new correlator was installed at the Usuda Deep Space Center in Japan, and is used in VSOP and other domestic VLBI observations. In this paper, the key features of the Real-time VLBI Correlator (RVC) focusing on these advanced techniques are presented, and the results of its performance test are shown.

The aim of this study is to examine the effectiveness of various open-ended resonators. According to the required filter responses, the application to microwave filters based on presented open-ended resonators is systematically examined as well. First, the resonance property of the basic open-ended resonator is discussed based on even-and odd-mode analysis. The intrinsic property of a tapped open-ended resonator is also discussed here. Second, the basic properties of a stepped impedance resonator (SIR) and a loaded-element resonator are examined theoretically for improvement of spurious responses and the dual-passband response. The basic operations of these resonators are also explained based on even- and odd-mode analysis. Examples for filter applications based on presented resonators are also provided. We found that the intrinsic properties of the open-ended resonators are very useful for practical filter responses.

A constant amplitude transmission scheme for multicode wideband CDMA systems is proposed. Multicode wideband CDMA systems result in large amplitude fluctuation because the multicode signal is the sum of constituent code channel signals. This large amplitude fluctuation brings out large non-linear distortion and then, if unaccounted, can significantly degrade the bit error rate (BER) performance. Constant amplitude transmission, achieved by using a Walsh code and parity generator, is proposed to combat the large amplitude fluctuation and reduce the peak-to-average power ratio (PAPR). Unlike other constant amplitude transmission scheme, the proposed scheme does not use a redundant code channel. Computer simulation results show that the proposed scheme improves BER performance significantly and that the proposed scheme is extremely effective to the non-linear distortion of high power amplifier (HPA).

In this letter, the constant amplitude transmission for orthogonal multicode systems is discussed. In order to obtain the high power efficiency, we require the high power amplifier which has non-linear characteristic. The nonlinear distortion, however, may occur because of the multicode signals having large amplitude fluctuations. If we can achieve the constant amplitude transmission, the nonlinear distortion can be neglected. In this letter, I investigate the property of the information bit streams that can achieve the constant amplitude transmission and show that the bent sequences can achieve the constant amplitude transmission.

A novel adaptive algorithm based on pilot channel (PCA) for MMSE multiuser detection in downlink CDMA is proposed in this paper. This algorithm uses the information in pilot channel to compute the desired weight vector directly. Compared with conventional adaptive algorithms and blind algorithms, it does not require training sequences nor channel estimation. Analysis shows that the weight vector obtained by the PCA algorithm converges to the Wiener solution globally and its computational complexity is O(N2). Simulation results show that the PCA algorithm can adapt rapidly to the changing environment. The steady state performance can be enhanced by increasing the transmitted power in pilot channel, but is worse than that of conventional recursive least-square (RLS) algorithm in decision-directed mode. Also, performance of the adaptive MMSE detector is much better than that of conventional RAKE receiver.

This paper presents a new design of spread spectrum signals with the minimally sufficient dimension from the view point of frequency diversity. Letting the signature signal duration and the bandwidth be denoted by T and B, respectively, we can nominally represent a signature signal of either Direct Sequence (DS) or MultiCarrier (MC) spread spectrum system as the sum of N=BT sinusoidal signal units with their frequencies separated by 1/T or its multiples. In our design,assuming the maximum expected channel delay spread σd « T as usual, one signature signal viewed in the frequency domain is made up of the minimum number K 2πσdB of sinusoidal signal units which are arranged so as there is placed at least one unit in coherence bandwidth 1/(2πσd) in which the fading channel transfer function has strong correlation. Although the signature signal does not make use of all the units in the given frequency domain as in the ordinary spread spectrum systems, but uses only skipped units, it can be shown that almost the same frequency diversity effect is attained. And it is also shown that the immunity to the external interfering signals is by no means inferior. If every L=N/K T/(2πσd) consecutive sinusoidal signal units are assigned to the K signal units of a signature signal, L different signature signals are simultaneously available mutually orthogonal when the synchronous demodulation is performed in the same T period. We call each of the orthogonal sinusoidal signal sets a Frequency Devision (FD) signal set. Now, CDMA can be independently realized on each of the L FD signal sets provided the operation is synchronous or quasi-synchronous with respect to the symbol demodulation (or signature) period. Partitioning the simultaneous users among the FD sets, it is possible to decrease the number of CDMA users to be processed, retaining the total number of simultaneous users. Owing to this effect, the multiple access performance for the FD/CDMA system is shown to be superior to that of the ordinary DS or MC/CDMA system, assuming matched filter reception based on the complete estimation of the channel characteristics for the both cases. The decrease of the number of CDMA users per FD set makes it practical for the receiver to employ multiple access interference cancellation and even the maximum likelihood detection. Curiously, any FD signal set can be represented in the time domain as L repetition of a sequence with its period equal to K in the number of 1/B duration time chips.

High-capacity multiwavelength ring networks with bidirectional WDM add/drop multiplexer (WADM) having built-in EDFAs is analyzed and demonstrated. All WDM channels can be added/dropped independently in each direction. The capacity of a bidirectional ring is found to be approximately twice that of an unidirectional ring. An eight-wavelength WADM is demonstrated for a data rate of 10 Gb/s per channel, providing an overall capacity of 80 Gb/s. The performance of the add/drop multiplexer is not degraded by backward backscattering light. The same WADM is also demonstrated to be able to serve as a bidirectional in-line optical amplifier.

This paper investigates noise enhancement factors of a zero-forcing detector and a decision feedback detector for synchronous Multiple Input Multiple Output (MIMO) channels. It is first shown that the zero-forcing and decision feedback detectors can be implemented in a vector digital filter form, and the noise enhancement factors with the detectors can easily be calculated by using the vector digital filter form. This paper then applies the zero-forcing and decision feedback detectors to the signal detection of a frequency-overlapped multicarrier signaling (FOMS) system. The normalized noise enhancement factor, which is given as a product of the noise enhancement and bandwidth reduction factors, is shown to be smaller with the decision feedback detector than the zero-forcing detector. Results of computer simulations conducted to evaluate bit error rate (BER) performances with the two detectors are also shown together with the BER performance with a conventional channel-by-channel detector.

Increasing the capacity and intelligence of the next-generation Internet requires the application of optical technologies to switching nodes as well as transmission lines, and the development of advanced network architectures with end-to-end connection setup processing at the source node and autonomous routing at intermediate nodes. In the present paper, we design a new CDM-based switching scheme and node configurations that are suitable for a photonic IP switching system, in which a set of multiple-encoding CDM codes is utilized as routing information. In addition, we calculate the BER characteristics of the multiple-encoding CDM system by simulation. Under the condition that the chip duration of a certain code is a multiple of that of another code, the BER characteristics of the multiple-encoding system are shown to coincide with that of the single-encoding system by the longer code.

The use of a chirp signal is one of the methods to expand the detection range in subsurface radar. However, the presence of time-sidelobes after a conventional pulse-compression makes the detection range degraded because weak signals from underground objects are covered with a large time-sidelobe due to a ground surface reflection. In this paper, we propose a new pulse compression subsurface radar using a short chirp signal in which the echoes from the ground surface and the object are not overlapped. We show that the short chirp signal can improve the detection ability compared with a conventional chirp signal and examine the influence that the decreases of the signal duration and the compression ratio exert on the detection range. By the new pulse compression subsurface radar, the steel pipes buried down to 5 m in depth can be detected.

Session length and group size are two most significant factors in achieving efficient scheduling for unicast and multicast traffic in single-hop wavelength division multiplexing (WDM) local area networks (LANs). This paper presents a hybrid protocol to schedule both unicast and multicast traffic in broadcast WDM networks. The protocol makes an important assumption that unicast traffic is the major portion of the overall traffic and is usually scheduled with a pre-allocation-based protocol. On the other hand, multicast traffic is a smaller portion of the overall traffic with multicast sessions and multicast groups, and is scheduled with a reservation-based protocol. The concept of multicast threshold, a function of random variables including the multicast session length and the multicast group size, is also proposed to partition the multicast traffic into two types. If the transmission threshold of a multicast request is larger than the multicast threshold, the request is handled with a reservation-based protocol. Otherwise, the multicast request is handled similar to unicast traffic; that is, each packet in the multicast session is replicated and sent to the unicast queues of destinations. The results show that the hybrid protocol can achieve better channel utilization efficiency and packet delay for unicast traffic under the multicast scenarios with moderate session length and group size. However, separate scheduling or broadcasting will be more suitable for a multicast scenario with very large session length and group size, which is not common on most realistic networks.

This paper proposes a fault tolerant optical crossconnect (FTOXC) which can tolerate link, channel, and internal optical switch failures via spare optical channels, extra input/output (I/O) ports for an optical switch, and associated wavelength converters. It also proposes a fault tolerant wavelength routing algorithm (FTWRA) which is used in the normal and the restored state. The FTOXC and FTWRA can be applied to any all-optical network and can recover many types of failures. FTOXC can configure the number of working and spare channels in each output link based on the traffic demand. Two formulations in this paper can be used to determine the optimal settings of channels. A global optimal setting of working and spare channels in each link can be found by formulating the problem as an integer linear program (ILP). In addition, the number of working and spare channels in each link can be dynamically adjusted according to the traffic loads and the system reliability requirements. The tradeoff between these two conflicting objectives is analyzed by the Markov decision process (MDP).

For binary linear block codes, we introduce "multiple GMD decoding algorithm. " In this algorithm, GMD-like decoding is iterated around a few appropriately selected search centers. The original GMD decoding by Forney is a GMD-like decoding around the hard-decision sequence. Compared with the original GMD decoding, this decoding algorithm provides better error performance with moderate increment of iteration numbers. To reduce the number of iterations, we derive new effective sufficient conditions on the optimality of decoded codewords.

An optical spectral coding scheme is devised for fiber-optic code-division multiple-access (FO-CDMA) networks. The spectral coding is based on the pseudo-orthogonality of FO-CDMA codes properly written in the fiber Bragg grating (FBG) devices. For an incoming broadband optical signal having spectral components equal to the designed Bragg wavelengths of the FBG, the spectral components will be reflected and spectrally coded with the written FO-CDMA address codes. Each spectral chip has different central wavelength and is distributed over the spectrum of the incoming light source. Maximal-length sequence codes (m-sequence codes) are chosen as the signature or address codes to exemplify the coding and correlation processes in the FO-CDMA system. By assigning the N cycle shifts of a single m-sequence code to N users, we get an FO-CDMA network that can theoretically support N simultaneous users. To overcome the limiting factor of multiple-access interference (MAI) on the performance of the FO-CDMA network, an FBG decoder is configured on the basis of orthogonal correlation functions of the adopted pseudo-orthogonal codes. An intended receiver user that operates on the defined orthogonal correlation functions will reject any interfering user and obtain quasi-orthogonality between the FO-CDMA users in the network. Practical limiting issues on networking performance, such as non-flattened source spectra, optical path delay, and asynchronous data accesses, are evaluated in terms of the bit-error-rate versus the number of active users. As expected, the bit-error-rate will increase with the number of active users. Increasing the flatness parameter of optical signal will lead to a lower average error probability, since we are working in a part of the more flattened optical spectrum. In contrast, reducing the encoded bandwidth will reduce the total received power, and this will necessitate higher resolution of fiber Bragg gratings.

In this paper, two distinct optical network design approaches, namely mesh and multi-ring, for survivable WDM networks are investigated. The main objective is to compare these two design approaches in terms of network costs so that their merits in practical environments can be identified. In the mesh network design, a new mathematical model based on integer liner programming (ILP) and a heuristic algorithm are presented for achieving a minimal cost network design. In the multi-ring network design, a heuristic algorithm that can be applied to large network problems is proposed. The influence of wavelength conversion and the number of wavelengths multiplexed in a fiber on system designs are also discussed. Based on the simulation results, the redundancy quantities required for full protection in multi-ring approach are significantly larger in comparison to the minimal cost mesh counterpart.

Based on genetic algorithm (GA) in this paper we present a simple method to extract distributed circuit parameters of a multiple coupled nonuniform microstrip transmission lines from it's measured or computed S-parameters. The lines may be lossless or lossy, with frequency dependent parameters. First a sufficient amount of information about the system is measured or computed over an specified frequency range. Then this information is used as an input for a GA to determine the inductance and capacitance matrices of the system. The theory used for fitness evaluation is based on the steplines approximation of the nonuniform transmission lines and quasi-TEM assumptions. Using steplines approximation the system of coupled nonuniform transmission lines is subdivided into arbitrary large number of coupled uniform lines (steplines) with different characteristics. Then using modal decomposition method the system of coupled partial differential equations for each step is decomposed to a number of uncoupled ordinary wave equations which are then solved in frequency-domain.

An AC coupling configuration for the active guard band filters is introduced for suppressing substrate coupling noise in analog and digital mixed-signal integrated circuits. With this method, a substrate-coupling-noise cancellation signal can be supplied to a ground-level substrate by using a single 3-V supply on-chip circuits. Noise was suppressed to a maximum of less than 0.05 from 100 Hz to 2 MHz in a 0.35-µm CMOS test chip. Both experiments and a simulation based on the substrate extraction model showed the similar dependence of the noise-suppression effect on the arrangement of the guard-bands and analog circuits. The simulation is thus effective for optimizing the arrangement to suppress noise effects when designing a chip.