The search functionality is under construction.
The search functionality is under construction.

Keyword Search Result

[Keyword] TE(21534hit)

9141-9160hit(21534hit)

  • Sender Authenticated Key Agreements without Random Oracles

    Chifumi SATO  Takeshi OKAMOTO  Eiji OKAMOTO  

     
    PAPER-Theory

      Vol:
    E92-A No:8
      Page(s):
    1787-1794

    The purpose of this paper is to study sender authenticated key agreements by a third party, which uses the received parameters to verify the fact that a sender of a message knows his long-term private key. In particular, we propose a standard model for the protocol among three entities for the first time. The security of this protocol depends on the difficulty of solving two new problems related to one-way isomorphisms and the decision co-bilinear Diffie-Hellman problem on multiplicative cyclic groups. It is the first time that the security of a key agreement has been formally proven by using negligible probability. We believe that our contribution gives many applications in the cryptographic community.

  • Using Mobile TLA as a Logic for Dynamic I/O Automata

    Tatjana KAPUS  

     
    PAPER-Fundamentals of Software and Theory of Programs

      Vol:
    E92-D No:8
      Page(s):
    1515-1522

    Input/Output (I/O) automata and the Temporal Logic of Actions (TLA) are two well-known techniques for the specification and verification of concurrent systems. Over the past few years, they have been extended to the so-called dynamic I/O automata and, respectively, Mobile TLA (MTLA) in order to be more appropriate for mobile agent systems. Dynamic I/O automata is just a mathematical model, whereas MTLA is a logic with a formally defined language. In this paper, therefore, we investigate how MTLA could be used as a formal language for the specification of dynamic I/O automata. We do this by writing an MTLA specification of a travel agent system which has been specified semi-formally in the literature on that model. In this specification, we deal with always existing agents as well as with an initially unknown number of dynamically created agents, with mobile and non-mobile agents, with I/O-automata-style communication, and with the changing communication capabilities of mobile agents. We have previously written a TLA specification of this system. This paper shows that an MTLA specification of such a system can be more elegant and faithful to the dynamic I/O automata definition because the agent existence and location can be expressed directly by using agent and location names instead of special variables as in TLA. It also shows how the reuse of names for dynamically created and destroyed agents within the dynamic I/O automata framework can be specified in MTLA.

  • Physical Layer Network Coding for Wireless Cooperative Multicast Flows

    Jun LI  Wen CHEN  

     
    PAPER-Fundamental Theories for Communications

      Vol:
    E92-B No:8
      Page(s):
    2559-2567

    It has been proved that wireless network coding can increase the throughput of multi-access system [2] and bi-directional system [5] by taking the advantage of the broadcast nature of electromagnetic waves. In this paper, we introduce the wireless network coding to cooperative multicast system. We establish a basic 2-source and 2-destination cooperative system model with arbitrary number of relays (2-N-2 system). Then two regenerative network coding (RNC) protocols are designed to execute the basic idea of network coding in complex field (RCNC) and Galois field (RGNC) respectively. We illuminate how network coding can enhance the throughput distinctly in cooperative multicast system. Power allocation schemes as well as precoder design are also carefully studied to improve the system performance in terms of system frame error probability (SFEP).

  • Experimental Research of Arc Behavior in Liquid Metal for Current Limiting Application

    Yiying LIU  Mingzhe RONG  Yi WU  Chenxi PAN  Hong LIU  Shijie YU  

     
    PAPER-Arc Discharge & Contact Phenomena

      Vol:
    E92-C No:8
      Page(s):
    1008-1012

    The liquid metal current limiter (LMCL) is a possible alternative to limit the short current of power system due to its special merits. This paper is devoted to the investigation of the arc behavior in liquid metal GaInSn for current limiting application. Firstly, the arc evolution including arc initiation, arc expansion and arc extinguish is observed through an experimental device. The resistance of arc and the self healing property of liquid metal are described. Subsequently, the arc erosion on electrodes is presented with its causes analyzed. Finally, the arc characteristics with the influence of rise rate of prospective current and channel diameter are discussed in details.

  • Efficient Genetic Algorithm for Optimal Arrangement in a Linear Consecutive-k-out-of-n: F System

    Koji SHINGYOCHI  Hisashi YAMAMOTO  

     
    PAPER

      Vol:
    E92-A No:7
      Page(s):
    1578-1584

    A linear consecutive-k-out-of-n: F system is an ordered sequence of n components. This system fails if, and only if, k or more consecutive components fail. Optimal arrangement is one of the main problems for such kind of system. In this problem, we want to obtain an optimal arrangement of components to maximize system reliability, when all components of the system need not have equal component failure probability and all components are mutually statistically independent. As n becomes large, however, the amount of calculation would be too much to solve within a reasonable computing time even by using a high-performance computer. Hanafusa and Yamamoto proposed applying Genetic Algorithm (GA) to obtain quasi optimal arrangement in a linear consecutive-k-out-of-n: F system. GA is known as a powerful tool for solving many optimization problems. They also proposed ordinal representation, which produces only arrangements satisfying the necessary conditions for optimal arrangements and eliminates redundant arrangements with same system reliabilities produced by reversal of certain arrangements. In this paper, we propose an efficient GA. We have modified the previous work mentioned above to allocate components with low failure probabilities, that is to say reliable components, at equal intervals, because such arrangements seem to have relatively high system reliabilities. Through the numerical experiments, we observed that our proposed GA with interval k provides better solutions than the previous work for the most cases.

  • Combining HMM and Weighted Deviation Linear Transformation for Highband Speech Parameter Estimation

    Hwai-Tsu HU  Chu YU  

     
    LETTER-Speech and Hearing

      Vol:
    E92-D No:7
      Page(s):
    1488-1490

    A hidden Markov model (HMM)-based parameter estimation scheme is proposed for wideband speech recovery. In each Markov state, the estimation efficiency is improved using a new mapping function derived from the weighted least squares of vector deviations. The experimental results reveal that the performance of the proposed scheme is superior to that combining the HMM and Gaussian mixture model (GMM).

  • Partial Placement of EBG on Both Power and Ground Planes for Broadband Suppression of Simultaneous Switching Noise

    Jong Hwa KWON  Jong Gwan YOOK  

     
    LETTER-Electromagnetic Compatibility(EMC)

      Vol:
    E92-B No:7
      Page(s):
    2550-2553

    In this paper, a novel method of partially placing electromagnetic band-gap (EBG) unit cells on both the power and ground planes in multi-layer PCBs and packages is proposed; it can not only sufficiently eliminate simultaneous switching noise (SSN), but also prevent severe degradation of signal quality in high-speed systems with imperfect reference planes resulting from the perforated structures of uni-planar EBG unit cells. On the assumption that the noise sources and noise-sensitive devices exist only in specific areas, the proposed method partially arranges the EBG unit cells on both the power and ground planes, but only around the critical areas. The SSN suppression performance of the proposed structure is verified by a simulation and measurements.

  • An Efficient Bayesian Estimation of Ordered Parameters of Two Exponential Distributions

    Hideki NAGATSUKA  Toshinari KAMAKURA  Tsunenori ISHIOKA  

     
    PAPER

      Vol:
    E92-A No:7
      Page(s):
    1608-1614

    The situations where several population parameters need to be estimated simultaneously arise frequently in wide areas of applications, including reliability modeling, survival analysis and biological study. In this paper, we propose Bayesian methods of estimation of the ordered parameters of the two exponential populations, which incorporate the prior information about the simple order restriction, but sometimes breaks the order restriction. A simulation study shows that the proposed estimators are more efficient (in terms of mean square errors) than the isotonic regression of the maximum likelihood estimators with equal weights. An illustrative example is finally presented.

  • Performability Modeling for Software System with Performance Degradation and Reliability Growth

    Koichi TOKUNO  Shigeru YAMADA  

     
    PAPER

      Vol:
    E92-A No:7
      Page(s):
    1563-1571

    In this paper, we discuss software performability evaluation considering the real-time property; this is defined as the attribute that the system can complete the task within the stipulated response time limit. We assume that the software system has two operational states from the viewpoint of the end users: one is operating with the desirable performance level according to specification and the other is with degraded performance level. The dynamic software reliability growth process with performance degradation is described by the extended Markovian software reliability model with imperfect debugging. Assuming that the software system can process the multiple tasks simultaneously and that the arrival process of the tasks follows a nonhomogeneous Poisson process, we analyze the distribution of the number of tasks whose processes can be completed within the processing time limit with the infinite server queueing model. We derive several software performability measures considering the real-time property; these are given as the functions of time and the number of debugging activities. Finally, we illustrate several numerical examples of the measures to investigate the impact of consideration of the performance degradation on the system performability evaluation.

  • High-Speed Frequency Modulated DBR Lasers for Long-Reach Transmission Open Access

    Takaaki KAKITSUKA  Shinji MATSUO  

     
    INVITED PAPER

      Vol:
    E92-C No:7
      Page(s):
    929-936

    We present a novel high-speed transmitter consisting of a frequency modulated DBR laser and optical filters. The refractive index modulation in the phase control region of the DBR laser allows high-speed frequency modulation. The generated frequency modulated signal is converted to an intensity modulated signal using the edge of the optical filter pass band. We present theoretical simulations of high-speed modulation characteristics and extension of transmission reach. With the proposed transmitter, we review the experimental demonstration of 180-km transmission of a 10-Gb/s signal with a tuning range of 27 nm and 60-km transmission of a 20-Gb/s signal.

  • Pre-Whitening QR-Decomposition Maximum Likelihood Detection for Co-channel Interference Rejection in MIMO Systems

    Masaaki FUJII  

     
    LETTER-Wireless Communication Technologies

      Vol:
    E92-B No:7
      Page(s):
    2529-2532

    We describe a co-channel interference rejection scheme that is suitable for QR-decomposition maximum likelihood detection (MLD) in multiple-input and multiple output (MIMO) systems. A pre-whitening matrix for interference rejection is decomposed into a triangular matrix and its Hermitian matrix by using a complex Gaxpy version of the Cholesky algorithm. The decomposed triangular matrix is used as a spatial pre-filter to whiten co-channel interference. Simulation results demonstrate that the proposed scheme can suppress co-channel interference streams at the cost of receive diversity order and achieves better transmission performance than QR-decomposition MLD itself in MIMO channels with co-channel interference.

  • Mobile Handsets as Sensing Nodes in an Auto-Configured Hierarchical Cognitive Radio Network Scheme for Immediate Post-Disaster Communications

    Sonia MAJID  Kazi AHMED  

     
    PAPER-Network

      Vol:
    E92-B No:7
      Page(s):
    2397-2405

    A critical problem after a natural/manmade disaster is to provide immediate post-disaster communication links between the disaster victims and some overlay networks. This paper proposes a novel scheme that uses the surviving Mobile handSets (MS) as sensing nodes to form an auto-configured Hierarchical Cognitive Radio Network (H-CRN). The implementation of this H-CRN is explained through detailed problem scenario statement and step-by-step implementation of automatic identification of emergency situation by the MS nodes. An overview of the cross-layer framework used by the MS nodes is also presented. This novel scheme is tested through some hypothesis along with probability calculations for successful identification of emergency situation, formation of ad hoc group and Emergency Beacon Message (EBM) transmission.

  • Analysis of Initialized LMS Equalizer for Frequency Selective MIMO Channels Using Single Carrier IEEE 802.16-2004 PHY

    Kadir TURK  Ismail KAYA  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E92-B No:7
      Page(s):
    2413-2419

    An equalizer initialization technique for least mean squares (LMS) algorithm, which can equalize frequency selective multiple input multiple output (MIMO) channels, is presented and analyzed. The proposed method conducts an initial convergence step for superior training prior to running the LMS algorithm. This approach raises the training performance while the complexity of the LMS algorithm, which is known as the simplest training algorithm, is almost the same. The proposed technique is analyzed for the initial convergence and simulated for a possible single carrier MIMO application in single carrier (SC) IEEE802.16-2004 standards. The obtained performance after coding approximates the performance of the recursive least squares (RLS) algorithm as it is presented for 33 and 55 MIMO for comparisons.

  • Integrated Lithium Niobate Mach-Zehnder Interferometers for Advanced Modulation Formats Open Access

    Tetsuya KAWANISHI  Takahide SAKAMOTO  Akito CHIBA  

     
    INVITED PAPER

      Vol:
    E92-C No:7
      Page(s):
    915-921

    We present recent progress of high-speed Mach-Zehnder modulator technologies for advanced modulation formats. Multi-level quadrature amplitude modulation signal can be synthesized by using parallel Mach-Zehnder modulators. We can generate complicated multi-level optical signals from binary data streams, where binary modulated signals are vectorially summed in optical circuits. Frequency response of each Mach-Zehnder interferometer is also very important to achieve high-speed signals. We can enhance the bandwidth of the response, with thin substrate. 87 Gbaud modulation was demonstrated with a dual-parallel Mach-Zehnder modulator.

  • Steady-State Kalman Filtering for Channel Estimation in OFDM Systems for Rayleigh Fading Channels

    Maduranga LIYANAGE  Iwao SASASE  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E92-B No:7
      Page(s):
    2452-2460

    Kalman filters are effective channel estimators but they have the drawback of having heavy calculations when filtering needs to be done in each sample for a large number of subcarriers. In our paper we obtain the steady-state Kalman gain to estimate the channel state by utilizing the characteristics of pilot subcarriers in OFDM, and thus a larger portion of the calculation burden can be eliminated. Steady-state value is calculated by transforming the vector Kalman filtering in to scalar domain by exploiting the filter charactertics when pilot subcarriers are used for channel estimation. Kalman filters operate optimally in the steady-state condition. Therefore by avoiding the convergence period of the Kalman gain, the proposed scheme is able to perform better than the conventional method. Also, driving noise variance of the channel is difficult to obtain practical situations and accurate knowledge is important for the proper operation of the Kalman filter. Therefore, we extend our scheme to operate in the absence of the knowledge of driving noise variance by utilizing received Signal-to-Noise Ratio (SNR). Simulation results show considerable estimator performance gain can be obtained compared to the conventional Kalman filter.

  • Antenna-Permutation Channel-Vector Quantization for Finite Rate Feedback in Zero-Forcing Beamforming Multiuser MIMO-OFDM Systems

    Masaaki FUJII  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E92-B No:7
      Page(s):
    2442-2451

    An antenna-permutation (AP) scheme is described for channel-vector quantization (CVQ) in zero-forcing beamforming (ZFBF) multiuser multiple-input and multiple-output orthogonal frequency-division multiplexing systems with multiple receive antennas. Different sets of multiple channel sub-matrices are selected for different subcarriers and then quantized to multiple quantization vectors for finite rate feedback. Based on the quantization vectors, ZFBF provides a single stream or multiple streams to users while increasing frequency selectivity. Simulation results demonstrate that AP-CVQ with four-bit quantization that incorporates with pre-whitening maximum likelihood detection for two stream reception achieved better average packet error rates than minimum mean square error receive beamforming for single stream reception when the frequency selectivity was not severe.

  • The Consistency of the Pandemic Simulations between the SEIR Model and the MAS Model

    Yuki TOYOSAKA  Hideo HIROSE  

     
    PAPER

      Vol:
    E92-A No:7
      Page(s):
    1558-1562

    There are two main methods for pandemic simulations: the SEIR model and the MAS model. The SEIR model can deal with simulations quickly for many homogeneous populations with simple ordinary differential equations; however, the model cannot accommodate many detailed conditions. The MAS model, the multi-agent simulation, can deal with detailed simulations under the many kinds of initial and boundary conditions with simple social network models. However, the computing cost will grow exponentially as the population size becomes larger. Thus, simulations in the large-scale model would hardly be realized unless supercomputers are available. By combining these two methods, we may perform the pandemic simulations in the large-scale model with lower costs. That is, the MAS model is used in the early stage of a pandemic simulation to determine the appropriate parameters to be used in the SEIR model. With these obtained parameters, the SEIR model may then be used. To investigate the validity of this combined method, we first compare the simulation results between the SEIR model and the MAS model. Simulation results of the MAS model and the SEIR model that uses the parameters obtained by the MAS model simulation are found to be close to each other.

  • Intelligent Controller Implementation for Decreasing Splash in Inverter Spot Welding

    Joon-Ik SON  Young-Do IM  

     
    LETTER-Systems and Control

      Vol:
    E92-A No:7
      Page(s):
    1708-1712

    This study involves implementing an intelligent controller using the fuzzy control algorithm to minimize cold weld and splash in inverter AC spot welding. This study presents an experimental curve of a welding output current and the maximum value of the Instantaneous Heating Rate (IHRmax) using the contact diameter of an electrode as the parameter. It also presents the experimental curve of a welding output current and the slope (S) of the instantaneous dynamic resistance using the instantaneous contact area of an electrode as the parameter. To minimize cold weld and splash, this study proposes an intelligent controller that controls the optimum welding current in real time by estimating the contact diameter of an electrode and the contact area of the initial welding part.

  • Particle Swarm Optimization - A Survey

    Keisuke KAMEYAMA  

     
    INVITED PAPER

      Vol:
    E92-D No:7
      Page(s):
    1354-1361

    Particle Swarm Optimization (PSO) is a search method which utilizes a set of agents that move through the search space to find the global minimum of an objective function. The trajectory of each particle is determined by a simple rule incorporating the current particle velocity and exploration histories of the particle and its neighbors. Since its introduction by Kennedy and Eberhart in 1995, PSO has attracted many researchers due to its search efficiency even for a high dimensional objective function with multiple local optima. The dynamics of PSO search has been investigated and numerous variants for improvements have been proposed. This paper reviews the progress of PSO research so far, and the recent achievements for application to large-scale optimization problems.

  • Transfer Matrix Method for Instantaneous Spike Rate Estimation

    Kazuho WATANABE  Hiroyuki TANAKA  Keiji MIURA  Masato OKADA  

     
    INVITED PAPER

      Vol:
    E92-D No:7
      Page(s):
    1362-1368

    The spike timings of neurons are irregular and are considered to be a one-dimensional point process. The Bayesian approach is generally used to estimate the time-dependent firing rate function from sequences of spike timings. It can also be used to estimate the firing rate from only a single sequence of spikes. However, the rate function has too many degrees of freedom in general, so approximation techniques are often used to carry out the Bayesian estimation. We applied the transfer matrix method, which efficiently computes the exact marginal distribution, to the estimation of the firing rate and developed an algorithm that enables the exact results to be obtained for the Bayesian framework. Using this estimation method, we investigated how the mismatch of the prior hyperparameter value affects the marginal distribution and the firing rate estimation.

9141-9160hit(21534hit)