A coordinate plane representation of the resource requirements of digital modulation methods is presented, and an overall resource efficiency measure is proposed. This measure can be used for the comparison of digital modulation methods and the evaluation of an emerging modulation technique. Several typical digital modulation methods are compared based on this measure to show its validity.

A semi-distributed resource allocation scheme based on multihop equilibrium is proposed for OFDM-relay networks. This method aims to reduce the amount of feedback information from the relay nodes (RNs). Moreover, it utilizes radio resource by striking an efficient balance between the capacities of the BS-RN link and RN-MS link. Simulation results show that the proposed semi-distributed scheme achieves good performances in terms of throughputs and fraction of satisfied users.

In this paper, we propose a modified scheme of MSODB and PMS, called Predictive User Mobility Behavior (PUMB) to improve performance of resource reservation and call admission control for cellular networks. This algorithm is proposed in which bandwidth is allocated more efficiently to neighboring cells by key mobility parameters in order to provide QoS guarantees for transferring traffic. The probability is used to form a cluster of cells and the shadow cluster, where a mobile unit is likely to visit. When a mobile unit may change the direction and migrate to the cell that does not belong to its shadow cluster, we can support it by making efficient use of predicted nonconforming call. Concomitantly, to ensure continuity of on-going calls with better utilization of resources, bandwidth is borrowed from predicted nonconforming calls and existing adaptive calls without affecting the minimum QoS guarantees. The performance of the PUMB is demonstrated by simulation results in terms of new call blocking probability, handoff call dropping probability, bandwidth utilization, call successful probability, and overhead message transmission when arrival rate and speed of mobile units are varied. Our results show that PUMB provides the better performances comparing with those of MSODB and PMS under different traffic conditions.

In order to incorporate the reader/writers (RWs) into mobile electronic devices, miniaturization and flexibility are required. To meet these requirements, we fabricate an ultra-small RW with multiple contactless interfaces by mounting main unit circuits inside the antenna coil and using flexible multi-layer circuit board.

It is well known that the performance of CDMA systems may degrade in the presence of spreading code mismatch. The diagonal loading multiple constrained minimum variance (DL-MCMV) approaches have been proposed to deal with the mismatch problem. However, they still cannot improve the robust capability efficiently due to the spreading code mismatch. In this letter, a detector based on the variable DL technique is presented that offers more robust capabilities than the MCMV and DL-MCMV detectors. Computer simulation results are provided that illustrate the effectiveness of the proposed detector.

This paper proposes a hybrid multiband (MB) ultra wideband (UWB) system with direct sequence (DS) spreading. The theoretical error analysis for the DS-MB-UWB multiple access system with Rake receiver in the presence of multipath and narrowband interference is developed. The developed theoretical framework models the multiple access interference (MAI), multipath interference (MI) and narrowband interference for the designed UWB system. It is shown that the system error performance corresponding to the combining effects of these interference can be accurately modeled and calculated. Monte Carlo simulation results are provided to validate the accuracy of the model. Additionally, it is found that narrowband interference can be mitigated effectively in the multiband UWB system by suppressing the particular UWB sub-band co-existing with the interfering narrowband signal. A typical improvement of 5 dB can be achieved with 75% sub-band power suppression. On the other hand, suppression of UWB sub-band is also found to decrease frequency diversity, thus facilitating the increase of MAI. In this paper, the developed model is utilized to determine the parameters that optimize the UWB system performance by minimizing the effective interference.

The Finite-Difference Time-Domain (FDTD) technique is presented in this paper as an estimation method for radio propagation prediction in large and complex wireless local area network (WLAN) environments. Its validity is shown by comparing measurements and Ray-trace method with FDTD data. The 2 GHz (802.11b/g) and 5 GHz (802.11a) frequency bands are used in both the calculations and experiments. The electric field (E-field) strength distribution has been illustrated in the form of histograms and cumulative ratio graphs. By using the FDTD method to vary the number of human bodies in the environment, the effects on E-field distribution due to human body absorption are also observed for 5 GHz WLAN design.

This paper proposes an Integer Linear Programming (ILP)-based power minimization method by partitioning into regions, first, with three different VDD's(PM3V), and, secondly, with two different VDD's(PM2V). To reduce the solving time of triple-VDD case (PM3V), we also proposed a partitioned ILP method(p-PM3V). The proposed method provides 29% power saving on the average in the case of triple-VDD compared to the case of single VDD. Power reduction of PM3V compared to Clustered Voltage Scaling (CVS) was about 18%. Compared to the unpartitioned ILP formulation(PM3V), the partitioned ILP method(p-PM3V) reduced the total solution time by 46% at the cost of additional power consumption within 1.3%.

This paper presents a content-based retrieval algorithm for motion capture data, which is required to re-use a large-scale database that has many variations in the same category of motions. The most challenging problem is that logically similar motions may not be numerically similar due to the motion variations in a category. Our algorithm can effectively retrieve logically similar motions to a query, where a distance metric between our novel short-term features is defined properly as a fundamental component in our system. We extract the features based on short-term analysis of joint velocities after dividing an entire motion capture sequence into many small overlapped clips. In each clip, we select not only the magnitude but also the dynamic pattern of the joint velocities as our features, which can discard the motion variations while keeping the significant motion information in a category. Simultaneously, the amount of data is reduced, alleviating the computational cost. Using the extracted features, we define a novel distance metric between two motion clips. By dynamic time warping, a motion dissimilarity measure is calculated between two motion capture sequences. Then, given a query, we rank all the motions in our dataset according to their motion dissimilarity measures. Our experiments, which are performed on a test dataset consisting of more than 190 motions, demonstrate that our algorithm greatly improves the performance compared to two conventional methods according to a popular evaluation measure P(NR).

In this paper, the research advances in SIW-like (Substrate Integrated Waveguide-like) guided wave structures and their applications in the State Key Laboratory of Millimeter Waves of China is reviewed. Our work is concerned with the investigations on the propagation characteristics of SIW, half-mode SIW (HMSIW) and the folded HMSIW (FHMSIW) as well as their applications in microwave and millimeter wave filters, diplexers, directional couplers, power dividers, antennas, power combiners, phase shifters and mixers etc. Selected results are presented to show the interesting features and advantages of those new techniques.

In this paper, we focus on resource allocation schemes for minimizing the energy consumption of subscriber stations (SSs) in uplink flows of the IEEE 802.16 OFDMA systems. The resource allocation schemes assign subcarriers, powers, and data rates to each SS based on the measured signal to noise ratio (SNR) of the uplink channel and predefined modulation and coding scheme as system parameters. Previous research efforts to optimize resource allocation focus on the rate and throughput maximizations, and develop suboptimal heuristic algorithms. However, this paper intends to reduce the energy consumption of SSs by considering the relationship between energy efficiency and resource allocation. In order to clearly formulate the relationship, we use the Multiple Choice Knapsack (MCK) problem, which is proved to be an NP-hard problem. We propose two heuristic schemes to solve the NP-hard problem, which adaptively use the modulation and coding scheme, defined in the IEEE 802.16 OFDMA systems to minimize the required transmission power of each SS. Our simulation results show that the proposed schemes can reduce the energy consumption by up to 53% compared to the channel state information (CSI) scheme, which determines the modulation and coding level only considering the channel state information.

Though millimeter wave applications have attracted much attention in recent years, they have not yet been put to practical use. The major reason for the failure may be a large transmission loss peculiar to the short wavelength. In order to overcome the inconvenience, it may be promising to introduce the technology of millimeter-wave NRD-guide circuits. In this technology, not only NRD-guide but also Gunn diodes and Schottky diodes play the important role in high bit-rate millimeter-wave applications. A variety of practical millimeter wave wireless systems have been proposed and fabricated. Performances and applications of them are discussed in detail as well.

The purpose of this paper is to investigate the possible impact of cellular phones' signals on implantable cardiac pacemakers in elevators. This is achieved by carrying out precise numerical simulations based on the Finite-Difference-Time-Domain method to examine the electromagnetic fields in elevator models. In order to examine the realistic and complicated situations where humans are present in the elevator, we apply the realistic homogeneous human phantom and cellular radios operating in the frequency bands 800 MHz, 1.5 GHz and 2 GHz. These computed results of field strength inside the elevator are compared with a certain reference level determined from the experimentally obtained maximum interference distance of implantable cardiac pacemakers. This enables us to carry out a quantitative evaluation of the EMI risk to pacemakers by cellular radio transmission. The results show that for the case when up to 5 mobile radio users are present in the elevator model used, there is no likelihood of pacemaker malfunction for the frequency bands 800 MHz, 1.5 GHz and 2 GHz.

The importance of redundant technologies for improving dependability and delay fault testability are growing. This paper presents properties of a class of redundant technologies, namely two-rail logic, and analyzes testability of path delay faults occurring on two-rail logic circuits. The paper reveals the following characteristics of two-rail logic circuits: While the number of paths in two-rail logic circuits is twice that in ordinary single-rail logic circuits, the number of robust testable path delay faults in two-rail logic circuits is twice or more that in the single-rail logic circuits. This suggests two-rail logic circuits are more testable than ordinary single-rail logic circuits. On two-rail logic circuits, there may be some robust testable path delay faults that are functional un-sensitizable for any input vectors consisting of codewords of two-rail codes, i.e. for any input vectors that can occur during fault-free operation. Even if such faults occur, the circuits are still strongly fault secure for unidirectional stuck-at faults as well as they work correctly.

This paper presents a new particle swarm optimizer characterized by growing tree topology. If a particle is stagnated then a new particle is born and is located away from the trap. Depending on the property of objective problems, particles are born successively and the growing swarm constitutes a tree-topology. Performing numerical experiments for typical benchmarks, the algorithm efficiency is evaluated in several key measures such as success rate, the number of iterations and the number of particles. As compared with other basic PSOs, we can suggest that the proposed algorithm has efficient performance in optimization with low-cost computation.

In this paper, we propose a new approach to rotation invariant texture analysis. This method uses the Radon transform with some considerations in direction estimation of textural images. Furthermore, it utilizes the information obtained from the number of peaks in the variance array of the Radon transform as a realty feature. The textural features are then generated after rotation of texture along principle direction. Also, to eliminating the introduced error due to rotation of texture, a simple technique is presented. Experimental results on a set of images from the Brodatz album show a good performance achieved by the proposed method in comparison with some recent texture analysis methods.

Research of the shortest path problem in time-dependent networks has important practical value. An improved pheromone update strategy suitable for time-dependent networks was proposed. Under this strategy, the residual pheromone of each road can accurately reflect the change of weighted value of each road. An improved selection strategy between adjacent cities was used to compute the cities' transfer probabilities, as a result, the amount of calculation is greatly reduced. To avoid the algorithm converging to the local optimal solution, the ant colony algorithm was combined with genetic algorithm. In this way, the solutions after each traversal were used as the initial species to carry out single-point crossover. An improved ant colony algorithm for the shortest path problem in time-dependent networks based on these improved strategies was presented. The simulation results show that the improved algorithm has greater probability to get the global optimal solution, and the convergence rate of algorithm is better than traditional ant colony algorithm.

The Ethernet passive optical network (EPON), which is one of the PON technologies for realizing FTTx (Fiber-To-The-Curb/Home/Office), is a low-cost and high-speed solution to the bottleneck problem that occurs between a backbone network and end users. The EPON is compatible with existing customer devices that are equipped with an Ethernet card. To effectively control frame transmission from optical network units (ONUs) to an optical line termination (OLT), the EPON can use a multi-point control protocol (MPCP) with control functions in addition to the media access control (MAC) protocol function. In this paper, we propose a two-phase cycle dynamic bandwidth allocation (TCDBA) algorithm to increase the channel utilization on the uplink by allowing frame transmissions during computation periods, and combine the TCDBA algorithm with the queue management schemes performed within each ONU, in order to effectively support differentiated services. Additionally, we perform simulations to validate the effectiveness of the proposed algorithm. The results show that the proposed TCDBA algorithm improves the maximum throughput, average transmission delay, and average volume of frames discarded, compared with the existing algorithms. Furthermore, the proposed TCDBA algorithm is able to support differentiated quality of services (QoS).

Three experiments were conducted in this study to investigate the human ability to control pen pressure and pen tilt input, by coupling this control with cursor position, angle and scale. Comparisons between pen pressure input and pen tilt input have been made in the three experiments. Experimental results show that decreasing pressure input resulted in very poor performance and was not a good input technique for any of the three experiments. In "Experiment 1-Coupling to Cursor Position", the tilt input technique performed relatively better than the increasing pressure input technique in terms of time, even though the tilt technique had a slightly higher error rate. In "Experiment 2-Coupling to Cursor Angle", the tilt input performed a little better than the increasing pressure input in terms of time, but the gap between them is not so apparent as Experiment 1. In "Experiment 3-Coupling to Cursor Scale", tilt input performed a little better than increasing pressure input in terms of adjustment time. Based on the results of our experiments, we have inferred several design implications and guidelines.

This paper discusses the discourse understanding process in spoken dialogue systems. This process enables a system to understand user utterances from the context of a dialogue. Ambiguity in user utterances caused by multiple speech recognition hypotheses and parsing results sometimes makes it difficult for a system to decide on a single interpretation of a user intention. As a solution, the idea of retaining possible interpretations as multiple dialogue states and resolving the ambiguity using succeeding user utterances has been proposed. Although this approach has proven to improve discourse understanding accuracy, carefully created hand-crafted rules are necessary in order to accurately rank the dialogue states. This paper proposes automatically ranking multiple dialogue states using statistical information obtained from dialogue corpora. The experimental results in the train ticket reservation and weather information service domains show that the statistical information can significantly improve the ranking accuracy of dialogue states as well as the slot accuracy and the concept error rate of the top-ranked dialogue states.