In DS-CDMA cellular communications systems, the single frequency reuse can be utilized. Since large other-cell interference is produced, the well known soft handover or site diversity must be used. If the single frequency reuse is not utilized to avoid the other-cell interference, we will face the frequency allocation problem, similar to FDMA systems. In this paper, a DS-CDMA cellular system using band division is proposed. The available wide frequency band is divided into several narrow frequency bands and the different frequency bands are allocated to adjacent cells so as to avoid the large other-cell interference. For the frequency allocation, the channel segregation distributed channel allocation (CS-DCA) algorithm is applied. The link capacity is evaluated by computer simulation.

The voltage island style has been widely accepted as an effective way to design low power high performance chips. This paper proposes an automated voltage island generation flow in standard cell based designs. Two important objectives in voltage island designs are addressed in this flow: 1) reducing power dissipation under given performance constraints; 2) reducing implementation overheads, mainly layout overheads caused by cell clustering to form islands. The first objective is handled with timing and power driven netweighting and timing analysis in voltage assignment. For the second objective, we propose layout aware voltage assignment, i.e., voltage assignment during placement. We iteratively perform the following to adjustments: adjustment on voltage assignment to facilitate voltage island generation, and adjustment on cell locations to cluster cells in voltage islands. These iterations lead to a flow featured with tightly integrated voltage assignment and cell placement. Experimental results have demonstrated the advantages of our approach.

It is known that for any general access structure, a secret sharing scheme (SSS) can be constructed from an (m,m)-threshold scheme by using the so-called cumulative map or from a (t,m)-threshold SSS by a modified cumulative map. However, such constructed SSSs are not efficient generally. In this paper, a new method is proposed to construct a SSS from a (t,m)-threshold scheme for any given general access structure. In the proposed method, integer programming is used to derive the optimal (t,m)-threshold scheme and the optimal distribution of the shares to minimize the average or maximum size of the distributed shares to participants. From the optimality, it can always attain lower coding rate than the cumulative maps because the cumulative maps cannot attain the optimal distribution in many cases. The same method is also applied to construct SSSs for incomplete access structures and/or ramp access structures.

A wireless multi-hop virtual cellular network (VCN) was recently proposed to avoid the large peak transmit power, resulting from the high transmission rates expected for future mobile communication systems. In VCN, calls hop through several links to reach the central port, which is the gateway to the network. With the use of a routing algorithm based on the total uplink transmit power minimization criterion, the total transmit power of all the multi-hop links between the mobile terminal and the central port can be significantly reduced, in comparison with the present (single-hop) cellular network. In this paper, an "on-demand" channel assignment strategy, using the channel segregation dynamic channel allocation (CS-DCA) algorithm, is proposed for multi-hop DS-CDMA VCN. Computer simulation is conducted to evaluate the blocking probability performance and make a comparison between the VCN and the present cellular network.

We deal with quadratic semi-assignment problems with symmetric distances. This symmetry reduces the number of variables in its mixed integer programming formulation. We investigate a polytope arising from the problem, and obtain some basic polyhedral properties, the dimension, the affine hull, and certain facets through an isomorphic projection. We also present a class of facets.

We have proposed two space division multiple access (SDMA) approaches for OFDM signals: "Virtual Subcarrier Assignment (VISA)" and "Preamble Subcarrier Assignment (PASA)," both of which can enhance the system capacity without significant change of transmitter/receiver structures for already-existing OFDM-based standards such as IEEE802.11a. In order to investigate the performance of the proposed approaches in real wireless scenarios, we conducted a measurement campaign to obtain real channel state data at 5-GHz band in an indoor environment. Using the measured channel data, we can make the performance evaluation realistic. In this paper, after the brief overview of the two proposed SDMA approaches, we describe our measurement campaign in detail. Furthermore, we evaluate the performance of VISA-based system and PASA-based system by computer simulations using the measured channel state data and present a comparative study on the performance of the two proposed SDMA approaches in the realistic wireless environment.

We propose an ant-based algorithm to improve the alternate routing scheme for dynamic Routing and Wavelength Assignment (RWA) in all-optical wavelength-division- multiplexing (WDM) networks. In our algorithm, we adopt a novel twin routing table structure that comprises both a P-route table for connection setup and a pheromone table for ants' foraging. The P-route table contains P alternate routes between a source-destination pair, which are dynamically updated by ant-based mobile agents based on current network congestion information. Extensive simulation results upon the ns-2 network simulator indicate that by keeping a suitable number of ants in a network to proactively and continually update the twin routing tables in the network, our new ant-based alternate routing algorithm can result in a small setup time and achieve a significantly lower blocking probability than the promising alternate shortest-path (ASP) algorithm and the fixed-paths least congestion (FPLC) algorithm for dynamic RWA even with a small value of P.

With the application of optical add-drop multiplexers, wavelength assignment has become an important issue in SONET/WDM design. Among wavelength assignment methods, circle construction is of great importance. In this paper, we propose a novel matrix based circle construction algorithm for all-to-all uniform traffic in a bidirectional SONET/WDM ring.

A novel mobile assignment method based on transmit power and cell load is proposed for WCDMA base station location planning. Experimental results show that, compared with the currently widely used mobile assignment method based on link attenuation, the proposed mobile assignment method is more reasonable and unnecessary base stations are reduced in the planning results.

In wavelength-routed optical networks, wavelength converters are considered as one of the most critical network resources because they can significantly reduce the blocking probability, but still remain quite expensive. Unfortunately, previous wavelength assignment algorithms have seldom considered their presence. Therefore, in this paper, we propose a novel dynamic algorithm that can minimize the number of wavelength translations. Our algorithm establishes lightpaths by connecting a minimum number of wavelength-continuous segments. We mathematically prove the correctness of our algorithm. Then, we carry out extensive performance evaluations over three typical topologies with full-range or limited-range converters to compare our proposed algorithm with first-fit and most-used algorithms. The simulations show that, to obtain similar blocking performance, our algorithm requires much fewer converters, or the same number of converters but with smaller conversion ranges. From another perspective, with the same conversion capacity, our algorithm can significantly improve the blocking performance. Our algorithm is also scalable due to its polynomial time complexity and insignificant local signaling overhead.

Since sentences are the basic propositional units of text, knowing their themes should help in completing various tasks such as automatic summarization requiring the knowledge about the semantic content of text. Despite the importance of determining the theme of a sentence, however, few studies have investigated the problem of automatically assigning a theme to a sentence. In this paper, we examine the notion of sentence theme and propose an automatic scheme where head-driven patterns are used for theme assignment. We tested our scheme with sentences in encyclopedia articles and obtained a promising result of 98.96% in F-score for training data and 88.57% for testing data, which outperform the baseline using all but the head-driven patterns.

The shuffle-like network (SL-Net) is known as a logical topology for WDM-based multihop packet-switched networks. Even if we fix the logical topology to an SL-Net, we can still reposition nodes in the SL-Net by re-tuning wavelengths of transmitters and/or receivers. In conventional node placement algorithms, routes between nodes are assumed to be given. In this paper, we propose two heuristic node placement algorithms for the SL-Net to decrease the average end-to-end packet transmission delay under a given traffic matrix in the case that routes are design variables. The principal idea is to prevent too many traffic flows from overlapping on any link. To attain the idea, in one of the algorithms, a node is selected one by one in a decreasing order of the sums of sending and receiving traffic requirements in nodes, and its placement and routes between the node and all the nodes already placed are simultaneously decided so that the maximum of the amounts of traffic on links at the moment is minimum. In the other algorithm, a node is selected in the same way, and first it is placed so that the average distance between the node and all the nodes already placed is as large as possible, and then routes between the node and all the nodes already placed are decided so that the maximum of the amounts of traffic on links at the moment is minimum. Numerical results for four typical traffic matrices show that either of the proposed algorithms has better performance than conventional algorithms for each matrix, and show that the proposed algorithms, which are based on a jointed optimization approach of node placement and routing, are superior to algorithms which execute node placement and routing as two isolated phases.

An efficient pad assignment methodology to minimize voltage drop on a power distribution network is proposed. A combination of successive pad assignment (SPA) with incremental matrix inversion (IMI) determines both location and number of power supply pads to satisfy drop voltage constraint. The SPA creates an equivalent resistance matrix which preserves both pad candidates and power consumption points as external ports so that topological modification due to connection or disconnection between voltage sources and candidate pads is consistently represented. By reusing sub-matrices of the equivalent matrix, the SPA greedily searches the next pad location that minimizes the worst drop voltage. Each time a candidate pad is added, the IMI reduces computational complexity significantly. Experimental results including a 400 pad problem show that the proposed procedures efficiently enumerate pad order in a practical time.

Anycast refers to the transmission of data from a source node to (any) one member in the group of designed recipients in a network. When the physical network and the set of anycast requests are given, the Anycast Routing and Wavelength Assignment (ARWA) problem is to find a set of light-paths, one for each source, for anycasting messages to any one of the member in the anycast destination group such that not any path using the same wavelength passes through the same link. The goal of the ARWA problem is to minimize the number of used wavelengths. In this paper, the ARWA problem is formulated and studied; since ARWA problem is NP-hard, a three-phase genetic algorithm is proposed to solve it. This algorithm is used to find the close-to-optimal solution. Simulated results show that the proposed algorithm is able to achieve good performance.

Genetic Algorithms (GA) provide an attractive approach to solving the challenging problem of dynamic routing and wavelength assignment (RWA) in optical Wavelength Division Multiplexing (WDM) networks, because they usually achieve a significantly low blocking probability. Available GA-based dynamic RWA algorithms were designed mainly for WDM networks with a wavelength continuity constraint, and they cannot be applied directly to WDM networks with wavelength conversion capability. Furthermore, the available GA-based dynamic RWA algorithms suffer from the problem of requiring a very time consuming process to generate the first population of routes for a request, which may results in a significantly large delay in path setup. In this paper, we study the dynamic RWA problem in WDM networks with sparse wavelength conversion and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and GA. By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously update the routing tables, the new hybrid algorithm can promptly determine the first population of routes for a new request based on the routing table of its source node, without requiring the time consuming process associated with current GA-based dynamic RWA algorithms. To achieve a good load balance in WDM networks with sparse wavelength conversion, we adopt in our hybrid algorithm a new reproduction scheme and a new fitness function that simultaneously takes into account the path length, number of free wavelengths, and wavelength conversion capability in route selection. Our new hybrid algorithm achieves a better load balance and results in a significantly lower blocking probability than does the Fixed-Alternate routing algorithm, both for optical networks with sparse and full-range wavelength converters and for optical networks with sparse and limited-range wavelength converters. This was verified by an extensive simulation study on the ns-2 network simulator and two typical network topologies. The ability to guarantee both a low blocking probability and a small setup delay makes the new hybrid dynamic RWA algorithm very attractive for current optical circuit switching networks and also for the next generation optical burst switching networks.

In this paper, the channel segregation dynamic channel allocation (CS-DCA) scheme is applied to a multi-hop DS-CDMA virtual cellular network (VCN). After all multi-hop routes are constructed over distributed wireless ports in a virtual cell, the CS-DCA is carried out to allocate the channels to multi-hop up and down links. Each wireless port is equipped with a channel priority table. The transmit wireless port of each link initiates the CS-DCA procedure and selects a channel among available ones using its channel priority table to check. In this paper, the channel allocation failure rate is evaluated by computer simulation. It is shown that CS-DCA reduces remarkably the failure rate compared to FCA. The impact of propagation parameters on the failure rate is discussed.

In VDSM era, crosstalk is becoming a more and more vital factor in high performance VLSI designs, making noise mitigation in early design stages necessary. In this paper, we propose an effective algorithm optimizing crosstalk under congestion constraint in the layer assignment stage. A new model for noise severity measurement is developed where wire length is used as a scale for the noise immunity, and both capacitive and inductive coupling between sensitive nets are considered. We also take shield insertion into account for further crosstalk mitigation. Experimental results show that our approach could efficiently reduce crosstalk noise without compromising congestion compared to the algorithm proposed in [1].

This paper presents a distributed task assignment algorithm in a logical unidirectional ring, which guarantees that almost all tasks are assigned to servers with the first come first served (FCFS) policy without a global clock. A task assignment for a process is obtained in the time period needed for a message to circle the ring. This time period is almost optimal for a unidirectional ring. The FCFS policy is very important in terms of task fairness and can also avoid starvation and provide an efficient response time. Simulation results show that the algorithm generally works better than conventional task assignment or load balancing schemes with respect to both mean response time and task fairness.

In the next-generation networks, ultra high-speed data transmission will become necessary to support a variety of advanced point-to-point and multipoint multimedia services with stringent quality-of-service (QoS) constraints. Such a requirement desires the realization of optical WDM networks. Researches on multicast in optical WDM networks have become active for the purpose of efficient use of wavelength resources. Since multiple channels are more likely to share the same links in WDM multicast, effective routing and wavelength assignment (RWA) technology becomes very important. The introduction of the wavelength conversion technology leads to more efficient use of wavelength resources. This technology, however, has problems to be solved, and the number of wavelength converters will be restricted in the network. In this paper, we propose an effective WDM multicast design method on condition that wavelength converters on each switching node are restricted, which consists of three separate steps: routing, wavelength converter allocation, and wavelength assignment. In our proposal, preferentially available waveband is classified according to the scale of multicast group. Assuming that the number of wavelength converters on each switching node is limited, we evaluate its performance from a viewpoint of the call blocking probability.

In this paper, we propose a global routing method for 2-layer BGA packages. In our routing model, the global routing for each net is uniquely determined by a via assignment of each net. Our global routing method starts from an initial monotonic via assignment and incrementally improves the via assignment to optimize the total wire length and the wire congestion. Experimental results show that our proposed method generates a better global routing efficiently.