Dynamic spectrum access (DSA) exploits vacant frequency resources via distributed wireless access. The two nodes of DSA, master and slave, access different channels, and thus, cannot communicate with each other. To compensate for the access channel mismatch between the two nodes, a rendezvous channel, which exchanges control signals between two nodes, has been considered. The rendezvous channel based on channel-occupancy ratio (COR) adaptively constructs the channel in accordance with the channel occupancy of other systems, and both a high-speed rendezvous channel and high usage efficiency of the frequency resource are accomplished owing to exploitation of the vacant channel. In the rendezvous channel based on COR, the master and slave recognize the channel with minimum measured COR as the superior channel. As the master sends the control signals through the superior channel recognized by the master, the slave accesses to the superior channel recognized by the slave with higher access rate than to the other channels. As a result, the slave can receive the control signals with highly probability and thus high speed rendezvous channel is achieved. If the master and the slave recognize the different channel as the superior channel, the access rate to the other channel should be larger. This is because the slave obtains the opportunity of receiving the control signals through the different channel from the superior channel recognized by slave and thus the high probability that the slave can receive the control signals is maintained. Therefore, the access rate of slave should be constructed in accordance with the recognition of superior channel by master and slave. In this paper, the access rate of slave to the superior channel is optimally constructed using the analyzed probability of completion of rendezvous channel. The analysis of the probability of completion of rendezvous channel includes the recognition of superior channel by master and slave. Even if the master and the slave recognize the different channel, the constructed access rate of slave can maintain the high speed rendezvous channel. From the theoretical analysis and computer simulation, the rendezvous channel based on COR with the optimal access rate to the channel with the lowest COR achieves reduced time for the rendezvous channel.

A multi-channel cognitive radio is a powerful solution for recovering the exhaustion of frequency spectrum resources. In a cognitive radio, although master and slave terminals (which construct a communication link) have the freedom to access arbitrary channels, access channel mismatch is caused. A rendezvous scheme based on frequency hopping can compensate for this mismatch by exchanging control signals through a selected channel in accordance with a certain rule. However, conventional frequency hopping schemes do not consider an access protocol of both control signals in the rendezvous scheme and the signal caused by channel access from other systems. Further, they do not consider an information sharing method to reach a consensus between the master and slave terminals. This paper proposes a modified rendezvous scheme based on learning-based channel occupancy rate (COR) estimation and describes a specific channel-access rule in the slave terminal. On the basis of this rule, the master estimates a channel selected by the slave by considering the average COR of the other systems. Since the master can narrow down the number of channels, a fast rendezvous scheme with a few control signals is established.

We introduce a Welch FFT segment size selection method for FFT-based wide band spectrum measurement in the context of smart spectrum access (SSA), in which statistical spectrum usage information of primary users (PUs), such as duty cycle (DC), will be exploited by secondary users (SUs). Energy detectors (EDs) based on Welch FFT can detect the presence of PU signals in a broadband environment efficiently, and DC can be estimated properly if a Welch FFT segment size is set suitably. There is a trade-off between detection performance and frequency resolution in terms of the Welch FFT segment size. The optimum segment size depends on signal-to-noise ratio (SNR) which makes practical and optimum segment size setting difficult. For this issue, we previously proposed a segment size selection method employing a relationship between noise floor (NF) estimation output and the segment size without SNR information. It can achieve accurate spectrum awareness at the expense of relatively high computational complexity since it employs exhaustive search to select a proper segment size. In this paper, we propose a segment size selection method that offers reasonable spectrum awareness performance with low computational complexity since limited search is used. Numerical evaluations show that the proposed method can match the spectrum awareness performance of the conventional method with 70% lower complexity or less.

We create a practical method to set the segment size of the Welch FFT for wideband and long-term spectrum usage measurements in the context of hierarchical dynamic spectrum access (DSA). An energy detector (ED) based on the Welch FFT can be used to detect the presence or absence of primary user (PU) signal and to estimate the duty cycle (DC). In signal detection with the Welch FFT, segment size is an important design parameter since it determines both the detection performance and the frequency resolution. Between these two metrics, there is a trade-off relationship which can be controlled by adjusting the segment size. To cope with this trade-off relationship, we define an optimum and, more easy to analyze sub-optimum segment size design criterion. An analysis of the sub-optimum segment size criterion reveals that the resulting segment size depends on the signal-to-noise ratio (SNR) and the DC. Since in practice both SNR and DC are unknown, proper segment setting is difficult. To overcome this problem, we propose an adaptive segment size selection (ASSS) method that uses noise floor estimation outputs. The proposed method does not require any prior knowledge on the SNR or the DC. Simulation results confirm that the proposed ASSS method matches the performance achieved with the optimum design criterion.

This paper investigates a signal area (SA) estimation method for wideband and long time duration spectrum measurements for dynamic spectrum access. SA denotes the area (in time/frequency domain) occupied by the primary user's signal. The traditional approach, which utilizes only Fourier transform (FT) and energy detector (ED) for SA estimation, can achieve low complexity, but its estimation performance is not very high. Against this issue, we apply post-processing to improve the performance of the FT-based ED. Our proposed method, simple SA (S-SA) estimation, exploits the correlation of the spectrum states among the neighboring tiles and the fact that SA typically has a rectangular shape to estimate SA with high accuracy and relatively low complexity compared to a conventional method, contour tracing SA (CT-SA) estimation. Numerical results will show that the S-SA estimation method can achieve better detection performance. The SA estimation and processing can reduce the number of bits needed to store/transmit the observed information compared to the FT-based ED. Thus, in addition to improved detection performance it also compresses the data.

In this paper, we propose the novel concept of a spectrum database for improving the efficiency of spectrum utilization. In the current design of TV white space spectrum databases, a propagation model is utilized to determine the spectrum availability. However, this propagation model has poor accuracy for radio environment estimation because it requires a large interference margin for the PU coverage area to ensure protection of primary users (PUs); thus, it decreases the spectrum sharing efficiency. The proposed spectrum database consists of radio environment measurement results from sensors on mobile terminals such as vehicles and smart phones. In the proposed database, actual measurements of radio signals are used to estimate radio information regarding PUs. Because the sensors on mobile terminals can gather a large amount of data, accurate propagation information can be obtained, including information regarding propagation loss and shadowing. In this paper, we first introduce the architecture of the proposed spectrum database. Then, we present experimental results for the database construction using actual TV broadcast signals. Additionally, from the evaluation results, we discuss the extent to which the proposed database can mitigate the excess interference margin.

Dynamic spectrum access is the key approach in cognitive wireless regional area networks, and it is adopted by secondary users to access the licensed radio spectrum opportunistically. In order to realize real-time secondary spectrum usage, a dynamic spectrum access model based on stochastic differential games is proposed to realize dynamic spectrum allocation; a Nash equilibrium solution to the model is given and analyzed in this paper. From an overall perspective, the relationships between available spectrum percentage and the spectrum access rate are studied. Changes in the available spectrum percentage of the cognitive wireless regional area networks involve a deterministic component and a stochastic component which depends upon an r-dimensional Wiener process. The Wiener process represents an accumulation of random influences over the interval, and it reflects stochastic and time-varying properties of the available spectrum percentage. Simulation results show that the dynamic spectrum access model is efficient, and it reflects the time-varying radio frequency environment. Differential games are useful tools for the spectrum access and management in the time-varying radio environment.

Designing a medium access control (MAC) protocol is a key for implementing any practical wireless network. In general, a MAC protocol is responsible for coordinating users in accessing spectrum resources. Given that a user in cognitive radio(CR) networks do not have priority in accessing spectrum resources, MAC protocols have to perform dynamic spectrum access (DSA) functions, including spectrum sensing, spectrum access, spectrum allocation, spectrum sharing and spectrum mobility, beside conventional control procedure. As a result, designing MAC protocols for CR networks requires more complicated consideration than that needed for conventional/primary wireless network. In this paper, we focus on two major perspectives related to the design of a CR-MAC protocol: dynamic spectrum access functions and network infrastructure. Five DSA functions are reviewed from the point of view of MAC protocol design. In addition, some important factors related to the infrastructure of a CR network including network architecture, control channel management, the number of radios in the CR device and the number of transmission data channels are also discussed. The remaining challenges and open research issues are addressed for future research to aim at obtaining practical CR-MAC protocols.

Cognitive Radio (CR) is aimed at increasing the efficiency of spectrum utilization by allowing unlicensed users to access, in an opportunistic and non-interfering manner, some licensed bands temporarily and/or spatially unoccupied by the licensed users. The analysis of CR systems usually requires the spectral activity of the licensed system to be represented and characterized in a simple and tractable, yet accurate manner, which is accomplished by means of spectrum models. In order to guarantee the realism and accuracy of such models, the use of empirical spectrum occupancy data is essential. In this context, this paper explains the complete process of spectrum modeling, from the realization of field measurements to the obtainment of the final validated model, and highlights the main relevant aspects to be taken into account when developing spectrum usage models for their application in the context of the CR technology.

A wireless emergency communication network with a fixed allocation of spectrum resources cannot meet the tremendous demand for spectrum access when a crisis occurs. It is necessary to develop an effective spectrum access scheme to improve the performance of emergency communication systems. In this paper, we study a new emergency communication system combines cognitive radio technology and an emergency communication network. Emergency users can utility resources in a general network when traffic becomes congested in an emergency network. Non-reciprocal spectrum access scheme (NRA) and reciprocal spectrum access scheme (RA) for two heterogeneous cognitive networks, namely emergency network and general network are proposed to compare with traditional spectrum access scheme (TA). User behavior with each scheme is modeled by continuous-time Markov chains. Moreover, the blocking and dropping probabilities of users in two heterogeneous cognitive networks are derived as the performance metrics. In addition, the throughput and the spectrum utilization rate of the system are evaluated. Finally, we compare the performance of three dynamic spectrum access schemes. The simulation results show that the RA scheme is an effective scheme to enhance the performance of emergency systems.

A price-based spectrum investment and pricing scheme in cooperative cognitive radio networks is presented to use wireless resource more efficiently in technical and economic aspects. We analyze the impact of cooperative communications and the relationship between spectrum hole cost and leasing cost in the optimal decision of SAP.

An OFDMA-based (Orthogonal Frequency Division Multiple Access-based) channel access scheme for dynamic spectrum access has the drawbacks of large PAPR (Peak to Average Power Ratio) and large ACI (Adjacent Channel Interference). To solve these problems, a flexible channel access scheme using an overlap FFT filter-bank was proposed based on single carrier modulation for dynamic spectrum access. In order to apply the overlap FFT filter-bank for dynamic spectrum access, it is necessary to clarify the performance of the overlap FFT filter-bank according to the design parameters since its frequency characteristics are critical for dynamic spectrum access applications. This paper analyzes the overlap FFT filter-bank and evaluates its performance such as frequency characteristics and ACI performance according to the design parameters.

With advances in communication technologies, network services provided via the Internet have become widely diversified, and people can use these services not only via wired networks but also via wireless networks. There are several wireless systems in practical use such as cellular, WiMAX and WiFi. Although these wireless network systems have developed independently of each other, they should be integrated for seamless access by users. However, each system uses an individual spectrum prescribed by law to avoid radio interference. To overcome such a situation, dynamic spectrum access technology is receiving much attention. We propose a dynamic spectrum assignment method in which a WiFi system temporarily uses a spectrum band of the WiMAX system in WiFi/WiMAX integrated networks to reduce call blocking probability of multimedia communication services. We confirm the effectiveness of the proposed method by simulation experiments.

Dynamic spectrum access (DSA) has drawn immediate attention recently since it can opportunistically exploit any spectrum holes and thus improve bandwidth utilization. From the perspective of medium access control (MAC) design, the QoS requirement of SU is one of the design issues in DSA network. In this paper, we propose a new admission control scheme referred to as log-based dynamic spectrum access admission control (DSAC) aiming at (1) protection of the primary users and (2) QoS prioritization for the existing secondary users. The DSAC algorithm protects the PU by limiting SUs' access using PU's arrival log or statistics. Furthermore, the DSAC reserves a channel for previously admitted SU to reduce frequent service disruption of the SU. Reservation of channels is carried out without assuming any specific arrival process, and thus the DSAC would be practical for general user arrival patterns unlike the existing admission control techniques. Performance evaluation has shown that the proposed DSAC outperforms existing admission control schemes with respect to the PU blocking rate, SU communication stability, and SU aggregate throughput by about 13%, 26%, and 20%, respectively.

Mobile operators need to migrate from 2G to 3G networks in a cost-effective manner. Cognitive radio systems are currently being investigated as a promising solution to achieve spectrum efficiency by allowing coexistence of unlicensed (secondary) networks and licensed (primary) networks. However, conventional mechanisms to operate these systems incur additional complexity and fail to maximize network performance. In this paper, we propose a pilot sensing and frequency selection method with low complexity for OFDMA-based cognitive radio systems. Subject to the interference constraints imposed by the primary network, capacity maximization problems involving both up-link and down-link connections are considered for overall network performance improvement. The throughput and outage probability of the proposed method are evaluated by simulations. Our proposed method shows outstanding performance if the channel varies frequently in the primary network and the frequency reuse factor of the primary network is high.

A cognitive radio will have to sense and discover the spectral environments where it would not cause primary radios to interfere. Because the primary radios have the right to use the frequency, the cognitive radios as the secondary radios must detect radio signals before use. However, the secondary radios also need identifying the primary and other secondary radios where the primary radios are vulnerable to interference. In this paper, a method of simultaneously identifying signals of primary and secondary radios is proposed. The proposed bandwidth differentiation assumes the primary and secondary radios use orthogonal frequency division multiplexing (OFDM), and the secondary radios use at the lower number of subcarriers than the primary radios. The false alarm and detection probabilities are analytically evaluated using the characteristic function method. Numerical evaluations are also conducted on the assumption the primary radio is digital terrestrial television broadcasting. Result showed the proposed method could achieve the false alarm probability of 0.1 and the detection probability of 0.9 where the primary and secondary radio powers were 2.5 dB and 3.6 dB higher than the noise power. In the evaluation, the reception signals were averaged over the successive 32 snapshots, and the both the primary and secondary radios used QPSK. The power ratios were 4.7 dB and 8.4 dB where both the primary and secondary radios used 64QAM.

This paper addresses the coexistence issue of distributed heterogeneous networks where the network nodes are cognitive radio terminals. These nodes, operating as secondary users (SUs), might interfere with primary users (PUs) who are licensed to use a given frequency band. Further, due to the lack of coordination and the dissimilarity of the radio access technologies (RATs) among these wireless nodes, they might interfere with each other. To solve this coexistence problem, we propose an architecture that enables coordination among the distributed nodes. The architecture provides coexistence solutions and sends reconfiguration commands to SU networks. As an example, time sharing is considered as a solution. Further, the time slot allocation ratios and transmit powers are parameters encapsulated in the reconfiguration commands. The performance of the proposed scheme is evaluated in terms of the coexistence between PUs and SUs, as well as the coexistence among SUs. The former addresses the interference from SUs to PUs, whereas the latter addresses the sharing of an identified spectrum opportunity among heterogeneous SU networks for achieving an efficient spectrum usage. In this study, we first introduce a new parameter named as quality of coexistence (QoC), which is defined as the ratio between the quality of SU transmissions and the negative interference to PUs. In this study we assume that the SUs have multiple antennas and employ fixed transmit power control (fixed-TPC). By using the approximation to the distribution of a weighted sum of chi-square random variables (RVs), we develop an analytical model for the time slot allocation among SU networks. Using this analytical model, we obtain the optimal time slot allocation ratios as well as transmit powers of the SU networks by maximizing the QoC. This leads to an efficient spectrum usage among SUs and a minimized negative influence to the PUs. Results show that in a particular scenario the QoC can be increased by 30%.

Dynamic spectrum access has become a focal issue recently, in which identifying the available spectrum plays a rather important role. Lots of work has been done concerning secondary user (SU) synchronously accessing primary user's (PU's) network. However, on one hand, SU may have no idea about PU's communication protocols; on the other, it is possible that communications among PU are not based on synchronous scheme at all. In order to address such problems, this paper advances a strategy for SU to search available spectrums with asynchronous MAC-layer sensing. With this method, SUs need not know the communication mechanisms in PU's network when dynamically accessing. We will focus on four aspects: 1) strategy for searching available channels; 2) vacating strategy when PUs come back; 3) estimation of channel parameters; 4) impact of SUs' interference on PU's data rate. The simulations show that our search strategy not only can achieve nearly 50% less interference probability than equal allocation of total search time, but also well adapts to time-varying channels. Moreover, access by our strategies can attain 150% more access time than random access. The moment matching estimator shows good performance in estimating and tracing time-varying channels.

The public safety spectrum is generally under-utilized due to the unique traffic characteristics of bursty and mission critical. This letter considers the application of dynamic spectrum access (DSA) to the combined spectrum of public safety (PS) and commercial (CMR) users in a common shared network that can provide both PS and CMR services. Our scenario includes the 700 MHz Public/Private Partnership which was recently issued by the Federal Communications Commission. We first propose an efficient DSA mechanism to coordinate the combined spectrum, and then establish a call admission control that reflects the proposed DSA in a wideband code division multiple access based network. The essentials of our proposed DSA are opportunistic access to the public safety spectrum and priority access to the commercial spectrum. Simulation results show that these schemes are well harmonized in various network environments.

An OFDMA based channel access scheme is proposed for dynamic spectrum access to utilize frequency spectrum efficiently. Though the OFDMA based scheme is flexible enough to change the bandwidth and channel of the transmitted signals, the OFDMA signal has large PAPR (Peak to Average Power Ratio). In addition, if the OFDMA receiver does not use a filter to extract sub-carriers before FFT (Fast Fourier Transform) processing, the designated sub-carriers suffer large interference from the adjacent channel signals in the FFT processing on the receiving side. To solve the problems such as PAPR and adjacent channel interference encountered in the OFDMA based scheme, this paper proposes a novel dynamic channel access scheme using overlap FFT filter-bank based on single carrier modulation. It also shows performance evaluation results of the proposed scheme by computer simulation.