We propose an object detector using a sliding window method for an event-driven camera which outputs a subtracted frame (usually a binary value) when changes are detected in captured images. Since sliding window skips unchanged portions of the output, the number of target object area candidates decreases dramatically, which means that our system operates faster and with lower power consumption than a system using a straightforward sliding window approach. Since the event-driven camera output consists of binary precision frames, an all binarized convolutional neural network (ABCNN) can be available, which means that it allows all convolutional layers to share the same binarized convolutional circuit, thereby reducing the area requirement. We implemented our proposed method on the Xilinx Inc. Zedboard and then evaluated it using the PETS 2009 dataset. The results showed that our system outperformed BCNN system from the viewpoint of detection performance, hardware requirement, and computation time. Also, we showed that FPGA is an ideal method for our system than mobile GPU. From these results, our proposed system is more suitable for the embedded systems based on stationary cameras (such as security cameras).

To reduce the backbone video traffic generated by video surveillance, we propose an intelligent video surveillance system that offers multi-modal sensor-based event detection and event-driven video rate adaptation. Our proposed system can detect pedestrian existence and movements in the monitoring area by using multi-modal sensors (camera, laser scanner and infrared distance sensor) and control surveillance video quality according to the detected events. We evaluate event detection accuracy and video traffic volume in the experiment scenarios where up to six pedestrians pass through and/or stop at the monitoring area. Evaluation results conclude that our system can significantly reduce video traffic while ensuring high-quality surveillance.

This paper discusses the perspectives of using a wake-up receiver (WUR) in wireless body area network (WBAN) applications with event-driven data transfers. First we compare energy efficiency between the WUR-based and the duty-cycled medium access control protocol -based IEEE 802.15.6 compliant WBAN. Then, we review the architectures of state-of-the-art WURs and discuss their suitability for WBANs. The presented results clearly show that the radio frequency envelope detection based architecture features the lowest power consumption at a cost of sensitivity. The other architectures are capable of providing better sensitivity, but consume more power. Finally, we propose the design modification that enables using a WUR to receive the control commands beside the wake-up signals. The presented results reveal that use of this feature does not require complex modifications of the current architectures, but enables to improve energy efficiency and latency for small data blocks transfers.

To reduce the inaccuracy caused by inappropriate time window, we propose two probabilistic fault localization schemes based on the idea of "extending time window." The global window extension algorithm (GWE) uses a window extension strategy for all candidate faults, while the on-demand window extension algorithm (OWE) uses the extended window only for a small set of faults when necessary. Both algorithms can increase the metric values of actual faults and thus improve the accuracy of fault localization. Simulation results show that both schemes perform better than existing algorithms. Furthermore, OWE performs better than GWE at the cost of a bit more computing time.

In program slicing, widget-based event-driven programs are different from conventional programs because of their particular features of object construction infrastructure and event-driven mechanism and asynchronous access of global variables. Therefore conventional slicing techniques cannot be applied to widget-based event-driven programs. To solve this problem, this paper first introduces a set of representing schemes including an object construction tree, an object dependence table, a global variable dependence table and an event-driven program dependence graph, then defines a WbEd slicing criterion through combining three kinds of slicing criteria: instruction criterion, event-loop criterion and obj-attr criterion. And a slicing method is developed based on these slicing criteria. Eventually a widget-based event-driven program slicer wbedSlicer is illustrated to verify the efficiency and correctness of the slicing approach.

Accurate current analysis is required in circuit designs to analyze electromigration failure rate, power consumption, voltage drop, and so on. A charge-based current model for CMOS gates is presented in this paper. The current waveform of a CMOS gate during a transition consists of three components: one occurs when the input changes and the others exist only when the output changes. These three components are characterized by triangular pulses with four parameters which can be easily obtained after timing simulation. This model has been embedded into our switch-level timing simulator to generate the current waveform. The simulated current waveform helps solve the VLSI reliability problems due to electromigration and excess voltage drops in the power buses. When comparing the results obtained by using SPICE with those by our model, we find agreement, especially on the time points at which current pulses occur.

Circuit simulators are used to verify circuit functionality and to obtain detailed timing information before the expensive fabrication process takes place. They have become an essential CAD tool in an era of sub-micron technology. We have developed a new event-driven MOS circuit simulator to replace a direct method circuit simulator. In our simulator, partitioned subcircuits are analyzed by a direct method matrix solver, and these are controlled by an event-driven scheme to maintain accuracy. The key of this approach is how to manage events for circuit simulation. We introduced two types of events: self-control events for a subcircuit and prediction correcting events between subcircuits. They control simulation accuracy, and bring simulation efficiency through multi-rate behavior of a large scale circuit. The event-driven scheme also brings some useful functions which are not available from a direct method circuit simulator, such as a selected block simulation function and a batch simulation function for load variation. We simulated logic modules (buffer, adder, and counter) with about 1000 MOSFETs with our event-driven MOS circuit simulator. Our simulator was 5-7 times faster than a SPICE-like circuit simulator, while maintaining the less than 1% error accuracy. The selected block simulation function enables to shorten simulation time without losing any accuracy by selecting valid blocks in a circuit to simulate specified node waveforms. Using this function, the logic modules were simulated 13-28 times faster than the SPICE-like circuit simulator while maintaining the same accuracy.