In this paper, a new heuristic algorithm is proposed to optimize the power domain clustering in controlling-value-based (CV-based) power gating technology. In this algorithm, both the switching activity of sleep signals (p) and the overall numbers of sleep gates (gate count, N) are considered, and the sum of the product of p and N is optimized. The algorithm effectively exerts the total power reduction obtained from the CV-based power gating. Even when the maximum depth is kept to be the same, the proposed algorithm can still achieve power reduction approximately 10% more than that of the prior algorithms. Furthermore, detailed comparison between the proposed heuristic algorithm and other possible heuristic algorithms are also presented. HSPICE simulation results show that over 26% of total power reduction can be obtained by using the new heuristic algorithm. In addition, the effect of dynamic power reduction through the CV-based power gating method and the delay overhead caused by the switching of sleep transistors are also shown in this paper.

Leakage power consumption of logic elements has become a serious problem, especially in the sub-100-nanometer process. In this paper, a novel power gating approach by using the controlling value of logic elements is proposed. In the proposed method, sleep signals of the power-gated blocks are extracted completely from the original circuits without any extra logic element. A basic algorithm and a probability-based heuristic algorithm have been developed to implement the basic idea. The steady maximum delay constraint has also been introduced to handle the delay issues. Experiments on the ISCAS'85 benchmarks show that averagely 15-36% of logic elements could be power gated at a time for random input patterns, and 3-31% of elements could be stopped under the steady maximum delay constraints. We also show a power optimization method for AND/OR tree circuits, in which more than 80% of gates can be power-gated.

This paper describes the effect of lowering the supply voltage and threshold voltages on the energy reduction of an ultralow-voltage multi-threshold CMOS/SIMOX (MTCMOS/SIMOX) circuit. The energy dissipation is evaluated using a graph with equispeed and equienergy lines on a supply voltage and a threshold voltage plane. In order to draw equispeed and equienergy lines for ultralow-voltage circuits, we propose a modified energy-evaluation model taking into account a input-waveform transition-time of the circuits. The validity of the proposed energy-evaluation model is confirmed by the evaluation of a gate-chain TEG and a 16-bit CLA adder fabricated with 0.25-µm MTCMOS/SIMOX technology. Using the modified model, the energy-reduction effect in lowering the supply voltage is evaluated for a single-Vth fully-depleted CMOS/SOI circuit, a dual-Vth CMOS circuit consisting of fully-depleted low- and medium-Vth MOSFETs, and a triple-Vth MTCMOS/SIMOX circuit. The evaluation reveals that lowering the supply voltage of the MTCMOS/SIMOX circuit to 0.5 V is advantageous for the energy reduction at a constant operating speed.

This paper surveys trends in and prospects for low power LSI circuits technologies for portable terminal equipment, in which low-voltage operation of LSIs will be emphasized because this equipment will be battery-powered. Since this brings about serious operation speed degradation of LSIs, however, it will become more and more important how to operate them faster under low-supply voltage. We propose two new circuit techniques that make it possible to operate LSIs at high speed even when the supply voltage is very low (1-2 V corresponding to one or two battery cells). The new low-voltage RF LSI circuit technique, developed using silicon bipolar technology and using a novel current-folded mixer architecture for the modulator, result in a highly linear modulator that operates at 2 V. Its power consumption is less than 2/3 that of previously reported ICs. And for a low voltage baseband LSI we propose the multi-threshold CMOS (MTCMOS) technique, which uses two sets of threshold-voltage levels so that the LSI can operate at high speed when driven by a 1-V power supply. The multi-threshold CMOS architecture enabled us to create LSIs that operate faster than conventional CMOS circuits using high-threshold-voltage MOSFETs. When operating with a 1-V power supply, our LSIs are three times faster than the conventional ones.