We describe a transmission system having a data rate of 160 Gbit/s based on the RZ-DPSK modulation format. The 160 Gbit/s single-polarization signal is generated by optical time division multiplexing technology using the base rate of 40 Gbit/s. The setup is explained and results are given with a special focus on the stability issue of the transmission system. The pulse source, the optical gate for demultiplexing, the clock recovery and the balanced photo-detector are based on semiconductor components. We present long-term bit error measurements (10 hours) over two different long-haul fiber links. The first link comprises 3106 km standard single mode fiber and uses a PMD mitigation scheme. The other link consists of 4 dispersion managed 80 km fiber spans without the need for an additional PMD compensation. Using EDFA amplification solely and also no FEC, error-free operation was achieved over several hours, only limited by slow drift effects in the laboratory system.

By using multiple transmit antennas, wireless systems have a large capacity in time-varying multipath fading channels. Space-time block code (STBC), space-frequency block code (SFBC), and space-time-frequency (STF) block code are well-known techniques in transmitter diversity schemes. While the SFBC (or the STF block coded) system gives full diversity at frequency-nonselective channels, it breaks down when used in a frequency-selective environment. This is because the SFBC (or the STF block code) scheme disregards frequency selectivity of the channel by assuming that channel frequency responses (CFRs) at adjacent subcarriers are the same. In this paper, we propose efficient channel estimation and symbol decoding methods, which consider the difference between CFRs at the adjacent subcarriers of the SFBC (or the STF block coded) orthogonal frequency division multiplexing (OFDM) system in multipath fading channels. The proposed method gives initial channel information by designing a simple training symbol, and the CFRs at all the subcarriers and the differences between the CFRs are easily calculated by using an interpolation method or a discrete Fourier transform (DFT) operation.

Currently, space division multiplexing (SDM), where individual data streams are transmitted from different antennas simultaneously, is expected to be a promising technology for achieving a high data rate within a limited frequency band in a multiple-input multiple-output channel. In this paper, transmitter and receiver architectures of SDM applications are described, and performance improvement with the increase of data streams is shown referring to results of computer simulations. In addition, channel coded systems are also evaluated.

This paper presents an analysis of the cavity length modulation of a Z-cut quartz etalon equipped with a weight for Laser Diode (LD) wavelength lockers. The electro-optic effect, piezoelectric effect and photo-elastic effect are considered, and the mechanical movement of the etalon with a weight is analyzed by using a mechanical circuit. Approximate equations that clearly explain the mechanical force, mechanical resonance frequency, and Q factor of the mechanical resonance are obtained. The mechanism for improving the modulation efficiency by placing a weight is clarified. We also compare the analysis with experimental results, and show that most of the experimental values are in accord with the calculated values.

Optical signal processing is one of essential technologies for improving the flexibility of all-optical network. Above all, recently there have been a lot of studies regarding all-optical 2R/3R regeneration technology. However, there are few studies about all-optical 2R/3R technologies that are carried out in field environment. In this paper, we report the successful results of field trials of an all-optical 2R regeneration system based on an electro-absorption modulator for 40-Gbit/s WDM transmission systems with optical add/drop multiplexing. It was made sure that by applying the all-optical 2R regeneration system to the optical add/drop multiplexer in the 320-km-long transmission systems the transmission characteristics of the express signal after 320-km transmission and those of the dropped signal at 160-km can be made nearly the same. It is quite important that the transmission characteristics are equal for both the dropped and express channel from a point of view of the system design, and the results in this paper suggests one possible solution for this matter.

This paper presents a wavelength lock system using a Z-cut quartz etalon supported at the middle point. The Z-cut quartz etalon possesses the cavity length modulation and the low temperature coefficient. We propose a Z-cut quartz etalon supported at the middle point in order to improve the modulation index and response time. The mechanism of the center supported Z-cut quartz etalon is described. We also show that the etalon possesses a high modulation index, a high Q factor, and a rapid response time in experimental results. A self-tuning dither oscillator realized by using quartz etalon is also described.

In this letter, we evaluate the performance of Optical Cross Connect (OXC) architectures equipped with limited-range wavelength converters. Performance will be evaluated according to both an optimum and a random output wavelength assignment strategy. Analytical and simulation results show the possibility to reduce the conversion degree of the Wavelength Converters while keeping network performance high.

A new data-aided carrier frequency offset (CFO) estimation technique is presented for correlative coded OFDM systems in the presence of strong multipath. Different from traditional data-aided estimation techniques, the technique estimates CFO by detecting amplitude of pilots rather than their phase shift and removes effects on CFO estimation due to intercarrier interference by an iterative compensation method. A theoretical analysis of its performance has been derived and simulation results comparing the new technique with a traditional data-aided estimation technique are presented.

We propose a new diversity scheme for orthogonal frequency division multiplexing/multi-input multi-output (OFDM/MIMO) systems. The proposed scheme, named turbo layered space-frequency coded OFDM (TLSFC-OFDM), exploits the turbo principle with space hopping (SH). The TLSFC-OFDM system with SH provides a spatial coding so that we can obtain the transmit diversity. We also introduce a successive interference cancellation (SIC) algorithm that requires no ordering and fewer iterations to converge. As a result, this scheme reduces computational complexity. Computer simulation results show that the unordered SIC-based TLSFC-OFDM system outperforms the OFDM/H-BLAST system. It is also shown that the proposed system can operate even with fewer receive antennas than transmit antennas.

Multi-carrier code division multiplexing (MC-CDM) is one of promising multiplexing techniques for fourth-generation mobile downlink communications systems, where high data rate services should be provided even for high speed-cruising mobiles. For MC-CDM-based packet communication, a frequency scheduling method, which adaptively assigns different sub-carriers to different users, is proposed. This paper proposes a frequency scheduling method, which utilizes pre-assignmented subcarriers in the frequency domain for the MC-CDM scheme. Furthermore, the performance of the proposed system in frequency selective fading channels is compared with that of a no-scheduled MC-CDM scheme by computer simulation in both single- and multi-cell environments. From the results, it is found that the proposed system achieves better bit error rate performance than the no-scheduled MC-CDM scheme and can control quality of service (QoS) for active users.

This paper presents 160-Gbit/s full channel time-division demultiplexing using a semiconductor optical amplifier hybrid integrated demultiplexer on a planer lightwave circuit. Error-free demultiplexing from a 160-Gbit/s signal to 8 channel 20 Gbit/s signals is successfully demonstrated. Results of a 160-Gbit/s optical time-division-multiplexed full channel OTDM signal transmission experiment using the circuit and successful 80-km transmission are presented.

We consider the multicast routing problem for large-scale wavelength division multiplexing (WDM) optical networks where transmission requests are established by point-to-multipoint connections. To realize multicast routing in WDM optical networks, some nodes need to have light (optical) splitting capability. A node with splitting capability can forward an incoming message to more than one output link. We consider the problem of minimizing the number of split-capable nodes in the network for a given set of multicast requests. The number of wavelengths is fixed and given a priori. We propose a genetic algorithm that exploits the combination of alternative shortest paths for the given multicast requests in order to minimize the number of required split-capable nodes. This algorithm is examined for two realistic networks constructed based on the locations of major cities in Ibaraki Prefecture and those in Kanto District in Japan. Our experimental results show that the proposed algorithm can reduce more than 10% of split-capable nodes compared with other routing algorithms whereby the optimization for the split-capable node placement is not taken into account.

We consider space division multiplexing in a MIMO-OFDM system for high data rate transmission. Channel estimation is very important for suppressing interference and demultiplexing signals. In a wireless LAN system such as IEEE 802.11a, only a few training symbols are inserted in each subcarrier. First, we propose a channel estimation method for a MIMO-OFDM system with two training symbols per subcarrier. The basic idea is to estimate the time-domain channel responses between the transmit and receive antennas. The array response vectors for each subcarrier are calculated by applying a fast Fourier transform to them. We then can obtain the adaptive weights to cancel the interference. We show that employing training symbols having a lower condition number of the matrix used for the channel estimation improves the estimation accuracy. Furthermore, we show the bit error rate for several signal detection schemes using the above estimated channel. It is shown that an ordered successive detection based on an MMSE criterion has excellent performance, that is, it can achieve higher-speed transmissions with a lower transmit power.

In this paper, iterative adaptive soft parallel interference canceller (ASPIC) is proposed for turbo coded multiple-input multiple-output (MIMO) multiplexing. ASPIC is applied to transform a MIMO channel into single-input multiple-output (SIMO) channels for maximum ratio diversity combining (MRC). In the ASPIC, replicas of the interference are generated and subtracted from the received signals. For the generation of replicas with higher reliability, iterative ASPIC is proposed. It performs the iterative interference cancellation by feedback of the log-likelihood ratio (LLR) sequence obtained as the turbo decoder output. For iterative ASPIC, at the transmitter, the information sequence and parity sequence are transmitted from different antennas. In this paper, the achievable bit error rate (BER) performance, in a Rayleigh fading channel, for the turbo coded MIMO multiplexing with the proposed iterative ASPIC system is evaluated by computer simulation.

Application of multipled block codes (MBCs) for realizing new flexible and efficient transmission systems that feature in hunting-free reframing and asynchronous multiplexing is investigated. First, the principles of MBC are overviewed to show the capacities of filterless clock recovery. Then it is shown that modification of simple frame structure of MBC line code can be used for attaining hunting-free reframing for multiplexing systems. Two types of MBCs are developed to this end. While the one uses header blocks for hunting-free reframing, the other uses distributed frame patterns. Header design of multipled block codes (MBC) for hunting-free reframing (HFR) is investigated for frame patterns with and without violation compensation. The feasibility of hunting-free reframing is tested in an experimental system. Application of hunting-free reframing to asynchronous multiplexing is also investigated and tested in an experimental system. Finally, advantages of hunting-free multiplexing systems are discussed.

All-optical switching is of considerable interest, since it enables the construction of large-capacity networks with protocol- and bit-rate-independent transmission. In this paper, we determine the most desirable of three all-optical architectures for a backbone network, by comparing the following architectures: the wavelength-routed network, the slotted wavelength-routed network, and the optical burst switching network. After proposing an optical path accommodation algorithm that minimizes the total fiber length, we evaluate the total network cost in order to compare the availability of the first two architectures. We then compare the architectures in terms of the burst blocking probability in order to clarify the effectiveness of the third architecture.

This paper presents a simplified maximum likelihood detection (MLD) scheme for multiple-input and multiple-output spatial division multiplexing (MIMO-SDM) systems. In the scheme, ordered successive detection (OSD) is applied to multiple symbol candidates retained in the preceding stage to limit the number of symbol vector candidates. Accordingly, the subsequent MLD searches for the most likely signal vector among the limited symbol-vector candidates. Simulation results demonstrated that the proposed scheme provides the bit error rate performance close to that achieved by MLD while reducing the computational complexity.

We study the statistical multiplexing performance of self-similar traffic. We consider that input streams have different QoS (Quality of Service) requirements such as loss and delay jitter. By applying the FBM (fractal Brownian motion) model, we present methods of estimating the effective bandwidth of aggregated traffic. We performed simulations to evaluate the QoS performances and the bandwidths required to satisfy them. The comparison between the estimation and the simulation confirms that the estimation could give rough data of the effective bandwidth. Finally, we analyze the bandwidth gain with priority multiplexing against non-prioritized multiplexing and suggest how to get better performance with the right configuration of QoS parameters.

In this letter, we investigate the performance of using subband adaptive loading for the combination of orthogonal frequency division multiplexing (OFDM) and adaptive antenna array. The frequency-domain adaptive loading is very effective to deal with the frequency-selective fading which is inevitable in broadband wireless communications. However, almost all of the existing adaptive loading algorithms are based on "subcarrier-to-subcarrier" mode which may results in awfully large signaling overhead, since every subcarrier needs its own signaling loop between the transmitter and receiver. We investigate the performance of the combination of OFDM and adaptive antenna array when a subband adaptive loading algorithm is used to decrease the signaling overhead. It is shown by simulation results that at the cost of some tolerable performance loss, the signaling overhead of adaptive loading can be greatly reduced.

We have developed a code-division-multiplexing (CDM) transmission scheme for future cellular communication systems, which uses cyclic shifted-and-extended (CSE) codes generated from an M-sequence to enable seamless communication in highly mobile environments. Because the correlation characteristics of CSE codes are determined by the M-sequence, the cross-correlation values are accumulated as a result of combining transmitted signals with opposite polarities in parallel channels. The accumulated cross-correlation values significantly degrade transmission performance, especially with multi-level modulation schemes such as quadrature amplitude modulation (QAM). We thus propose a cancellation technique to eliminate the accumulated cross-correlation values. We have evaluated the transmission performance of the CDM transmission scheme with the proposed technique by computer simulation. The new scheme enables high-quality data transmission in fast-fading channels.