In this paper, we study and propose an inter-cell co-channel interference (CCI) mitigation method for pilot signals using cyclic shift Zadoff-Chu (CS-ZC) sequences for SC-FDMA-based uplink without tight scheduler coordination among cells. Firstly, we investigate the issue of severe detection performance degradation created by the lack of orthogonality among the pilot signals without alignment of the allocated frequency resource positions among cells when using the conventional CS-ZC sequences generation scheme. Secondly, we identify the primary factor causing the issue. Thirdly, we propose a frequency-dependent CS-ZC sequence generation scheme by allocating the same spectrum elements of the ZC sequence to the overlapped subcarriers among cells to mitigate the inter-cell CCI of the pilot signals without alignment of the frequency resource positions among cells. Finally, we confirm the validity of the proposal using uplink data BLER evaluation under a multipath fading condition by computer simulation compared to the conventional method, and show that the proposal achieves around 0.9 dB and 0.6 dB better performance at 10% BLER than the conventional method for 1 RB and 2 RBs frequency offsets in 3 RBs transmission bandwidth, respectively.

Radiation of a Hertzian dipole placed within a cylindrical cavity with narrow slots is investigated. Narrow axial and transverse slots are considered. Scattered fields are expanded in terms of eigenfunctions and boundary conditions are enforced to obtain a set of simultaneous equations. Computations are performed to check the validity of the formulation.

In this paper we propose a novel RFID anti-collision technique that intelligently combines polling and random access schemes. These two fundamentally different medium access control protocols are coherently integrated in our design while functionally complementing each other. The polling mode is designed to enable fast collision-free identification for the tags that exist within reader's coverage across the sessions. In contrast, the random access mode attempts to read the tags uncovered by the polling mode. Our proposed technique is particularly suited for a class of RFID applications in which a stationary reader periodically attempts to identify the tags with slow mobility. Numerical results show that our proposed technique yields much faster identification time against the existing approaches under various operating conditions.

Slotted wireless ad hoc networks are drawing more and more attention because of their advantage of QoS (Quality of Service) support for multimedia applications owing to their collision-free packet transmission. Time slot assignment is an unavoidable and important problem in such networks. The existing time slot assignment methods have in general a drawback of limited available bandwidth due to their local assignment optimization without the consideration of directions of the radio wave transmission of wireless links along the routes in such networks. A new time slot assignment is proposed in this paper in order to overcome this drawback. The proposed assignment is different from the existing methods in the following aspects: a) consideration of link directions during time slot assignment; b) largest bandwidth to be achieved; c) feasibility in resource limited ad hoc networks because of its fast assignment. Moreover, the effectiveness of the proposal is confirmed by some simulation results.

As a method to realize a high-speed communication in the home network, the power-line communication (PLC) technique is known. A problem of PLC is that leakage radiation interferes with existing systems. When OFDM is used in a PLC system, the leakage radiation is not sufficiently reduced, even if the subcarriers corresponding to the frequency-band of the existing system are never used, because the signal is not strictly band-limited. To solve this problem, each subcarrier must be band-limited. In this paper, we apply the OQAM based multi-carrier transmission (OQAM-MCT) to a high-speed PLC system, where each subcarrier is individually band-limited. We also propose a pilot-symbol sequence suitable for frequency offset estimation, symbol-timing detection and channel estimation in the OQAM-MCT system. In this method, the pilot signal-sequence consists of a repeated series of the same data symbol. With this method, the pilot sequence approximately becomes equivalent to OFDM sequence and therefore existing pilot-assisted methods for OFDM are also applicable to OQAM-MCT system. Computer simulation results show that the OQAM-MCT system achieves both good transmission rate performance and low out-of-band radiation in PLC channels. It is also shown that the proposed pilot-sequence improves frequency offset estimation, symbol-timing detection and channel estimation performance as compared with the case of using pseudo-noise sequence.

Based on the cyclotomy classes of extension fields, a family of binary cyclotomic sequences are constructed and their pseudorandom measures (i.e., the well-distribution measure and the correlation measure of order k) are estimated using certain exponential sums. A lower bound on the linear complexity profile is also presented in terms of the correlation measure.

This paper presents the formulation for the evaluation of external coupling in the alternating-phase feed single-layer slotted waveguide array antenna with baffles by using the Spectrum of Two-Dimensional Solutions (S2DS) method. A one-dimensional slot array is extracted from the array by assuming the periodicity in transversal direction and introducing the perfect electric conductors in the external region. The uniform excitation over the finite array is synthesized iteratively to demonstrate the fast and accurate results by S2DS. A unit design model with the baffles is introduced to determine the initial parameters of the slot pair which accelerate the iteration. Experiment at 25.3 GHz demonstrates good uniformity of the aperture field distribution as well as the effects of the baffles. The directivity is 32.7 dB which corresponds to the aperture efficiency 90.5% and the reflection is below -15.0 dB over 1.3 GHz.

In this letter, we enumerate the number of cyclically inequivalent M-ary Sidel'nikov sequences of given length as well as the number of distinct autocorrelation distributions that they can have, while we change the primitive element for generating the sequence.

We define a new quaternary cyclotomic sequences of length 2p, where p is an odd prime. We compute the autocorrelation of these sequences. In terms of magnitude, these sequences have the autocorrelations with at most 4 values.

Many applications in wireless sensor networks (WSNs) require the energy efficiency and scalability. Although IEEE 802.15.4/Zigbee which is being considered as general technology for WSNs enables the low duty-cycling with time synchronization of all the nodes in network, it still suffer from its low scalability due to the beacon frame collision. Recently, various algorithms to resolve this problem are proposed. However, their manners to implement are somewhat ambiguous and the degradation of energy/communication efficiency is serious by the additional overhead. This paper describes an Energy-efficient BOP-based Beacon transmission Scheduling (EBBS) algorithm. EBBS is the centralized approach, in which a resource-sufficient node called as Topology Management Center (TMC) allocates the time slots to transmit a beacon frame to the nodes and manages the active/sleep schedules of them. We also propose EBBS with Adaptive BOPL (EBBS-AB), to adjust the duration to transmit beacon frames in every beacon interval, adaptively. Simulation results show that by using the proposed algorithm, the energy efficiency and the throughput of whole network can be significantly improved. EBBS-AB is also more effective for the network performance when the nodes are uniformly deployed on the sensor field rather than the case of random topologies.

To improve the performance of the optimal pilot sequences over multiple OFDM symbols in fast time-varying channels, this letter proposes a novel channel estimation method using virtual pilot tones in multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. Assuming that the superimposed virtual pilot tones at the data locations over the specific sub-carriers are transmitted from all transmit antennas, the corresponding virtual received pilot signals at the same locations are obtained from the neighboring real received pilot signals over the same sub-carriers by Wiener filter. Based on the least squares (LS) channel estimation, the channel parameters can be obtained from the combination of the virtual and real received pilot signals over one OFDM symbol. Simulation results show that the proposed channel estimation method greatly outperforms the previous method for the optimal pilot sequences over multiple OFDM symbols in fast time-varying channels, as well as approaches the method for the comb-type optimal pilot sequences in performance.

To guarantee the timely provisioning of QoS to real-time oriented multiparty and distributed computing applications (e.g., video conferencing and grid computing) that require the utilization of time and quantity-related resources, the resource should be reserved in advance. However, this new type of reservation (i.e., advance reservation) may collide with legacy (i.e., immediate) reservations that do not specify their session duration. In this paper, to suggest a balanced solution between sharing pools of resources and the managing of collisions between reservation calls, a revenue-based resource sharing scheme (focusing on the bandwidth) is proposed. The proposed scheme attempts to avoid possible collisions by employing a virtual profile of resources reserved in advance in an effort to achieve enhanced resource utilization. It is shown through NS-2 [22] -based network simulations that the proposed scheme can achieve balanced performance when compared with other schemes, including static resource partitioning and complete resource sharing.

Recently, multimedia services are increasing with the widespread use of various wireless applications such as web browsers, real-time video, and interactive games, which results in traffic asymmetry between the uplink and downlink. Hence, time division duplex (TDD) systems which provide advantages in efficient bandwidth utilization under asymmetric traffic environments have become one of the most important issues in future mobile cellular systems. It is known that two types of intercell interference, referred to as crossed-slot interference, additionally arise in TDD systems; the performances of the uplink and downlink transmissions are degraded by BS-to-BS crossed-slot interference and MS-to-MS crossed-slot interference, respectively. The resulting performance unbalance between the uplink and downlink makes network deployment severely inefficient. Previous works have proposed intelligent time slot allocation algorithms to mitigate the crossed-slot interference problem. However, they require centralized control, which causes large signaling overhead in the network. In this paper, we propose to change the shape of the cellular structure itself. The conventional cellular structure is easily transformed into the proposed cellular structure with distributed receive antennas (DRAs). We set up statistical Markov chain traffic model and analyze the bit error performances of the conventional cellular structure and proposed cellular structure under asymmetric traffic environments. Numerical results show that the uplink and downlink performances of the proposed cellular structure become balanced with the proper number of DRAs and thus the proposed cellular structure is notably cost-effective in network deployment compared to the conventional cellular structure. As a result, extending the conventional cellular structure into the proposed cellular structure with DRAs is a remarkably cost-effective solution to support asymmetric traffic environments in future mobile cellular systems.

This letter presents a method that offers the simple calculation of the electric shielding effectiveness of a collinear unequal narrow slot array in a planar conducting screen. An integral equation for an aperture electric field on the unequal narrow slot array is used instead of coupled integral equations for a multiple slot and solved by applying Galerkin's method of moments. Numerical results illustrate the shielding effectiveness and aperture electric field distributions of the collinear unequal two-narrow slot array by using single integral equation.

Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and gain in the 25 GHz frequency band.

This paper proposes a fast, efficient detection algorithm of missing data (also referred to as blotches) based on Markov Random Field (MRF) models with less computational load and a lower false alarm rate than the existing MRF-based blotch detection algorithms. The proposed algorithm can reduce the computational load by applying fast block-matching motion estimation based on the diamond searching pattern and restricting the attention of the blotch detection process to only the candidate bloch areas. The problem of confusion of the blotches is frequently seen in the vicinity of a moving object due to poorly estimated motion vectors. To solve this problem, we incorporate a weighting function with respect to the pixels, which are accurately detected by our moving edge detector and inputed into the formulation. To solve the blotch detection problem formulated as a maximum a posteriori (MAP) problem, an iterated conditional modes (ICM) algorithm is used. The experimental results show that our proposed method results in fewer blotch detection errors than the conventional blotch detectors, and enables lower computational cost and the more efficient detecting performance when compared with existing MRF-based detectors.

In the Evolved UTRA (UMTS Terrestrial Radio Access) uplink, single-carrier frequency division multiple access (SC-FDMA) radio access was adopted owing to its advantageous low peak-to-average power ratio (PAPR) feature, which leads to wide coverage area provisioning with limited peak transmission power of user equipments. This paper proposes orthogonal pilot channel generation using the combination of FDMA and CDMA in the SC-FDMA-based Evolved UTRA uplink. In the proposed method, we employ distributed FDMA transmission for simultaneous accessing users with different transmission bandwidths, and employ CDMA transmission for simultaneous accessing users with identical transmission bandwidth. Moreover, we apply a code sequence with a good auto-correlation property such as a Constant Amplitude Zero Auto-Correlation (CAZAC) sequence employing a cyclic shift to increase the number of sequences. Simulation results show that the average packet error rate performance using an orthogonal pilot channel with the combination of FDMA and CDMA in a six-user environment, i.e., four users each with a 1.25-MHz transmission bandwidth and two users each with a 5-MHz transmission bandwidth, employing turbo coding with the coding rate of R = 1/2 and QPSK and 16QAM data modulation coincides well with that in a single-user environment with the same transmission bandwidth. We show that the proposed orthogonal pilot channel structure using the combination of distributed FDMA and CDMA transmissions and the application of the CAZAC sequence is effective in the SC-FDMA-based Evolved UTRA uplink.

As THz wave has the advantages of enough resolution and penetration to materials, it has been examined to be used for the imaging system. The propagation distance of THz wave is limited to be short. That is also the advantage for application to the indoor wireless communication etc. For the achievement of the ultra-high frequency oscillator (and concurrently transmitter) device, the properties of small, electronic excitation, the antenna constructed and being on the wafer are important. For the purpose, the Negative differential resistance Dual channel transistor (NDR-DCT) proposed by AIST is utilized. In this paper, as an initial theoretical analysis, we simulated the oscillation frequency of this device at about 100 GHz-1THz within the Terahertz band on which the above applications was expected. The equivalent circuit model of NDR-DCT was shown based on the analogy with the resonant tunnelling diode (RTDs), and the antenna as the resonance circuit part was designed by the numerical analysis. The possibility of the THz oscillation of this device was confirmed. The slit reflector that we proposed can realize the slot antenna on the device effectively and is suitable for three terminal structure semiconductor. its manufacturing is relatively easy.

This letter presents a simple joint estimation method for residual frequency offset (RFO) and sampling frequency offset (STO) in OFDM-based digital video broadcasting (DVB) systems. The proposed method selects a continual pilot (CP) subset from an unsymmetrically and non-uniformly distributed CP set to obtain an unbiased estimator. Simulation results show that the proposed method using a properly selected CP subset is unbiased and performs robustly.

UHF radio frequency identification (RFID) has gathered significant interest in the field of long-distance automatic identification applications. Since UHF RFID shares the frequency band with other RFID and/or other wireless systems, it is important to determine how much interference can be applied without causing a significant degradation of anti-collision speed. In this paper, the permissible link quality for RFID anti-collision in a practical environment is discussed by considering an erroneous communication link, taking into account of bit encoding and the type of interference. We approach the quantification of permissible link quality experimentally along with protocol simulations and the mathematical analyses. An international standard protocol, employing frame slotted ALOHA, was used as the air protocol. For these investigations, the present authors developed a protocol simulator. The simulation results were compared with analytical values based on Poisson distribution. The investigation in the return (tag to reader) link, and the forward (reader to tag) link, were analyzed separately. As result of the protocol simulation, it is generally important to secure the Pulse Error Rate 10-4 or better in both return and forward links for the anti-collision of 64 or less tags. The quality of the return link may be relaxed when the application does not require fast anti-collision. The degradation of the forward link, on the other hand, may entail loss of important commands, resulting in extremely slow anti-collision. It is measured experimentally that the required link quality can be relaxed by up to 10 dB in the return links and by 5 dB in the forward link when the primary source of interference originates in the interfering readers.