The search functionality is under construction.
The search functionality is under construction.

Keyword Search Result

[Keyword] OPS(47hit)

21-40hit(47hit)

  • Reflection-Based Deflection Routing in OPS Networks

    Masayuki MORITA  Hideki TODE  Koso MURAKAMI  

     
    PAPER-Fiber-Optic Transmission for Communications

      Vol:
    E91-B No:2
      Page(s):
    409-417

    An important issue in the realization of optical packet-switched (OPS) networks is the resolution of packet contention caused by the lack of RAM-like optical buffering. Although an optical buffer using fiber delay lines (FDLs) has been proposed, its capacity is extremely limited. There have been several studies of this problem. One approach is deflection routing, which is widely used in electronic packet-switched networks or optical burst-switched (OBS) networks. However, in OPS networks, packet lengths are short, so that the speed requirement for route lookup is very stringent. If the network topology is geometric, such as a Manhattan Street Network (MSN), hop-by-hop routing can be implemented by simple optical logic devices without an electronic routing table. However, if the topology is not geometric, it is hard to implement deflection routing electronically or optically. Another approach is reflection routing, which is easy to implement but has a higher probability of packet loss than does deflection routing. In this paper, we propose a packet contention resolution scheme, reflection-based deflection routing, which is based on reflection routing and enables switching the reflected packet to an alternate path if its primary path remains congested. Our method alleviates the time limitation on setting an alternate path by making use of the packet reflection latency and also reduces the probability of packet loss. We evaluate the performance of the proposed method by simulation experiments and show its effectiveness.

  • Policy-Based Management for Self-Managing Wireless Sensor Networks

    Si-Ho CHA  Jong-Eon LEE  Minho JO  Hee Yong YOUN  Seokjoong KANG  Kuk-Hyun CHO  

     
    PAPER

      Vol:
    E90-B No:11
      Page(s):
    3024-3033

    In a wireless sensor network (WSN), a large number of sensor nodes are deployed over a wide area and multi-hop communications are required between the nodes. Managing numerous sensor nodes is a very complicated task, especially when the energy issue is involved. Even though a number of ad-hoc management and network structuring approaches for WSNs have been proposed, a management framework covering the entire network management infrastructure from the messaging protocol to the network structuring algorithm has not yet been proposed. In this paper we introduce a management framework for WSNs called SNOWMAN (SeNsOr netWork MANagement) framework. It employs the policy-based management approach for letting the sensor nodes autonomously organize and manage themselves. Moreover, a new light-weight policy distribution protocol called TinyCOPS-PR and policy information base (PIB) are also developed. To facilitate scalable and localized management of sensor networks, the proposed SNOWMAN constructs a 3-tier hierarchy of regions, clusters, and sensor nodes. The effectiveness of the proposed framework is validated through actual implementation and simulation using ns-2. The simulation results reveal that the proposed framework allows smaller energy consumption for network management and longer network lifetime than the existing schemes such as LEACH and LEACH-C for practical size networks.

  • Cost Analysis of Optical Access Network Migration Scenarios to Broadcast Service

    Yasuyuki OKUMURA  

     
    PAPER-Fiber-Optic Transmission for Communications

      Vol:
    E90-B No:5
      Page(s):
    1071-1078

    This paper proposes the most effective deployment scenario of the passive double-star (PON) system to provide multiple broadband services, such as high speed Internet access and broadcast services. The deployment costs of the two major PON technologies, wavelength division multiplexing (WDM) and 10 Gbps time division multiplexing (TDM), are analyzed using the latest cost trend and the most popular access network architecture. These two technologies are compared using the cost analysis results to identify the cost-effective scenarios of PON system deployment. Based on the comparison, this paper reveals that the WDM network becomes cost effective when the service penetration and the shift ratio becomes high.

  • Stability Analysis of Fourth-Order Charge-Pump PLLs Using Linearized Discrete-Time Models

    Chia-Yu YAO  Chun-Te HSU  Chiang-Ju CHIEN  

     
    PAPER-Integrated Electronics

      Vol:
    E90-C No:3
      Page(s):
    628-633

    In this paper, we derive state equations for linearized discrete-time models of forth-order charge-pump phase-locked loops. We solve the differential equations of the loop filter by using the initial conditions and the boundary conditions in a period. The solved equations are linearized and rearranged as discrete-time state equations for checking stability conditions. Some behavioral simulations are performed to verify the proposed method. By examining the stability of loops with different conditions, we also propose an expression between the lower bound of the reference frequency, the open loop unit gain bandwidth, and the phase margin.

  • Optimization of Tunable Wavelength Converters and Internal Wavelengths in the Optical Packet Switch with Shared FDL Buffer

    Huhnkuk LIM  Changhwan OH  Chang-Soo PARK  

     
    LETTER-Switching for Communications

      Vol:
    E89-B No:7
      Page(s):
    2074-2078

    In an effort to reduce switch cost, we present the optimum numbers of tunable wavelength converters (TWCs) and internal wavelengths required for contention resolution of asynchronous and variable length packets, in the optical packet switch (OPS) with the shared fiber delay line (FDL) buffer. To optimize TWCs and internal wavelengths related to OPS design cost, we proposed a scheduling algorithm for the limited TWCs and internal wavelengths. For three TWC alternatives (not shared, partially shared, and fully shared cases), the optimum numbers of TWCs and internal wavelengths to guarantee minimum packet loss are evaluated to prevent resource waste. Under a given load, TWCs and internal wavelengths could be significantly reduced, guaranteeing the same packet loss as the performance of an OPS with full TWCs and internal wavelengths.

  • Analysis of Z-Cut Quartz Etalon with Weight for Wavelength Locker

    Shigeru OHSHIMA  Masahide MIYACHI  

     
    PAPER-Optoelectronics

      Vol:
    E88-C No:5
      Page(s):
    1033-1040

    This paper presents an analysis of the cavity length modulation of a Z-cut quartz etalon equipped with a weight for Laser Diode (LD) wavelength lockers. The electro-optic effect, piezoelectric effect and photo-elastic effect are considered, and the mechanical movement of the etalon with a weight is analyzed by using a mechanical circuit. Approximate equations that clearly explain the mechanical force, mechanical resonance frequency, and Q factor of the mechanical resonance are obtained. The mechanism for improving the modulation efficiency by placing a weight is clarified. We also compare the analysis with experimental results, and show that most of the experimental values are in accord with the calculated values.

  • Wavelength Lock System Using a Quartz Etalon Supported at the Middle Point

    Shigeru OHSHIMA  Masahiro OGUSU  Kazuhiko IDE  

     
    PAPER-Fiber-Optic Transmission for Communications

      Vol:
    E88-B No:4
      Page(s):
    1523-1530

    This paper presents a wavelength lock system using a Z-cut quartz etalon supported at the middle point. The Z-cut quartz etalon possesses the cavity length modulation and the low temperature coefficient. We propose a Z-cut quartz etalon supported at the middle point in order to improve the modulation index and response time. The mechanism of the center supported Z-cut quartz etalon is described. We also show that the etalon possesses a high modulation index, a high Q factor, and a rapid response time in experimental results. A self-tuning dither oscillator realized by using quartz etalon is also described.

  • A Dynamic and Distributed Routing Algorithm Supporting Bidirectional Multiple QoS Requirements in End-to-End

    NarmHee LEE  

     
    PAPER-Network

      Vol:
    E88-B No:2
      Page(s):
    632-642

    This paper proposes a distributed adaptive routing algorithm that may be applied to inter-domain calls passing over any type of network topology, traffic management and switching techniques on the path, while carrying bidirectional traffic with multiple QoS requirements. The path is searched within a contour area restricted by the number of hops between source and destination while the end-to-end admission of calls is controlled at source node and each hop's admission at each node, reflecting the latest resources availability and network conditions for the given QoS requirements. Performance analysis in various conditions shows good applicability in real networks.

  • Game Theory Based Co-evolutionary Algorithm (GCEA) for Solving Multiobjective Optimization Problems

    Kwee-Bo SIM  Ji-Yoon KIM  Dong-Wook LEE  

     
    LETTER-Artificial Intelligence and Cognitive Science

      Vol:
    E87-D No:10
      Page(s):
    2419-2425

    When we try to solve Multiobjective Optimization Problems (MOPs) using an evolutionary algorithm, the Pareto Genetic Algorithm (Pareto GA) introduced by Goldberg in 1989 has now become a sort of standard. After the first introduction, this approach was further developed and lead to many applications. All of these approaches are based on Pareto ranking and use the fitness sharing function to maintain diversity. On the other hand in the early 50's another scheme was presented by Nash. This approach introduced the notion of Nash Equilibrium and aimed at solving optimization problems having multiobjective functions that are originated from Game Theory and Economics. Since the concept of Nash Equilibrium as a solution of these problems was introduced, game theorists have attempted to formalize aspects of the equilibrium solution. The Nash Genetic Algorithm (Nash GA), which is introduced by Sefrioui, is the idea to bring together genetic algorithms and Nash strategy. The aim of this algorithm is to find the Nash Equilibrium of MOPs through the genetic process. Another central achievement of evolutionary game theory is the introduction of a method by which agents can play optimal strategies in the absence of rationality. Not the rationality but through the process of Darwinian selection, a population of agents can evolve to an Evolutionary Stable Strategy (ESS) introduced by Maynard Smith in 1982. In this paper, we propose Game theory based Co-Evolutionary Algorithm (GCEA) and try to find the ESS as a solution of MOPs. By applying newly designed co-evolutionary algorithm to several MOPs, the first we will confirm that evolutionary game can be embodied by co-evolutionary algorithm and this co-evolutionary algorithm can find ESSs as a solutions of MOPs. The second, we show optimization performance of GCEA by applying this model to several test MOPs and comparing with the solutions of previously introduced evolutionary optimization algorithms.

  • Performance Evaluation of the Optical Packet Switch with Hybrid Buffer Structure for the Contention Resolution of Asynchronous Variable Length Packets

    Huhnkuk LIM  Chang-Soo PARK  

     
    LETTER-Switching

      Vol:
    E87-B No:5
      Page(s):
    1421-1426

    We propose an optical packet switch (OPS) using a hybrid buffer structure for the contention resolution of asynchronous variable length packets. The hybrid buffer consists of a fiber delay line (FDL) buffer as the prime buffer and a shared electronic buffer as the supplementary buffer. For the performance evaluation, a modified void filling scheduling algorithm that can be applied to the OPS was proposed. Simulation results show that the use of the electronic buffer together with the FDL buffer significantly reduce the number of FDLs required for contention resolution and considerably lower packet loss.

  • A Modified Midtread Frequency Quantization Scheme for Digital Phase-Locked Loops

    Heejin ROH  Kyungwhoon CHEUN  

     
    LETTER-Transmission Systems and Transmission Equipment

      Vol:
    E87-B No:3
      Page(s):
    752-755

    A novel modified midtread quantizer is proposed for number-controlled oscillator frequency quantization in digital phase-locked loops (DPLLs). We show that DPLLs employing the proposed quantizer provide significantly improved cycle slip performance compared to those employing conventional midtread or midrise quantizers, especially when the number of quantization bits is small and the magnitude of input signal frequency normalized by the quantization interval is less than 0.5.

  • A Novel Technique for Optical Generation of Millimeter-Wave Signals Using Multiple Phase-Locked Lasers

    Masaharu HYODO  Masayoshi WATANABE  

     
    PAPER-Signal Generation and Processing Based on MWP Techniques

      Vol:
    E86-C No:7
      Page(s):
    1236-1244

    A new technique for optical generation of high-purity millimeter-wave (mm-wave) signals--namely, by synthesizing the outputs from cascadingly phase-locked multiple semiconductor lasers--was developed. Firstly, a high-spectral-purity mm-wave signal was optically generated by heterodyning the outputs from two phase-locked external-cavity semiconductor lasers. The beat signal was detected by a p-i-n photodiode whose output was directly coupled to a coax-waveguide converter followed by a W-band harmonic mixer. By constructing an optical phase-locked loop (OPLL), a high-spectral-purity mm-wave signal with an electrical power of 2.3 µW was successfully generated at 110 GHz with an rms phase fluctuation of 57 mrad. Secondly, the frequency of the mm-wave signal was extended by use of three cascadingly phase-locked semiconductor lasers. This technique uses a semiconductor optical amplifier (SOA) to generate four-wave-mixing (FWM) signals as well as to amplify the input signals. When the three lasers were appropriately tuned, two pairs of FWM signals were nearly degenerated. By phase-locking the offset frequency in one of the nearly degenerated pairs, the frequency separations among the three lasers were kept at a ratio of 1:2. Thus, we successfully generated high-purity millimeter-wave optical-beat signals at frequencies at 330.566 GHz with an rms phase fluctuation of 0.38 rad. A detailed analysis of the phase fluctuations was carried out on the basis of measured power spectral densities. The possibility of extending the mm-wave frequency up to 1 THz by using four cascadingly phase-locked lasers was also discussed.

  • A Pulse-Coupled Neural Network Simulator Using a Programmable Gate Array Technique

    Kousuke KATAYAMA  Atsushi IWATA  

     
    PAPER

      Vol:
    E86-D No:5
      Page(s):
    872-881

    In this paper, we propose a novel pulse-coupled neural network (PCNN) simulator using a programmable gate array (PGA) technique. The simulator is composed of modified phase-locked loops (PLLs) and a programmable gate array (PGA). The PLL, which is modified by the addition of multiple inputs and multiple feedbacks, works as a neuron. The PGA, which controls the network connection, works as nodes of dendritic trees. This simulator, which has 16 neurons and 32 32 network connections, is designed on a chip (4.73mm 4.73mm), and its basic operations such as synchronization, an oscillatory associative memory, and FM interactions are confirmed using circuit simulator SPICE.

  • A New Dynamic D-Flip-Flop Aiming at Glitch and Charge Sharing Free

    Sung-Hyun YANG  Younggap YOU  Kyoung-Rok CHO  

     
    PAPER-Electronic Circuits

      Vol:
    E86-C No:3
      Page(s):
    496-505

    A dual-modulus (divide-by-128/129) prescaler has been designed based on 0.25-µm CMOS technology employing new D-flip-flops. The new D-flip-flops are free from glitch problems due to internal charge sharing. Transistor merging technique has been employed to reduce the number of transistors and to secure reliable high-speed operation. At the 2.5-V supply voltage, the prescaler using the proposed dynamic D-flip-flops can operate up to the frequency of 2.95-GHz, and consumes about 10% and about 27% less power than Yuan/Svensson's and Huang's circuits, respectively.

  • Operation and Maintenance System for PON Subscriber Loops Using a Broadband Light Source

    Yong-Gi LEE  Young-Ho LEE  

     
    LETTER-Network Management/Operation

      Vol:
    E85-B No:9
      Page(s):
    1863-1866

    This paper presents a new operation and maintenance system for PON (Passive Optical Network) subscriber loops and an assessment of its feasibility through experiments. This system adopts a broadband continuous wave light source as a testing signal and a fiber grating filter as a reflective component. The fiber grating filter is inserted somewhere in each subscriber loop for reflection of the testing signal. Our results show that the proposed system operates well for the purposes of quick decision of loop state and easy testing for PON subscriber loops.

  • Transmission and Distribution Systems for Compatible Broadband Subscriber Networks Upgrade

    Yoshitaka TAKASAKI  Katsuyoshi ITO  

     
    PAPER-Transmission Systems and Transmission Equipment

      Vol:
    E84-B No:12
      Page(s):
    3204-3211

    Transmission and distribution systems are investigated for application in future fiber optic super-broadband and super-multi-channel subscriber loops. Gradual upgrading is considered so that future systems can keep compatibility with existing systems. First, time frame and strategies for subscriber loop upgrade are overviewed and assumptions for evolution of broadband multimedia distribution systems are discussed. It is suggested that upgrading to super-high definition (SHD) quality multimedia is desirable. Next, some examples of extra-auxiliary picture (EAP) formats are discussed to show the possibility of improving upgradability and compatibility by using extra-channels. Then multiplexing and channel selecting systems are investigated for economical realization of super-multi-channel distribution and flexible channel selection, and hybrid multiplexing (HMUX) and a trans-selector (T-SEL) are proposed. Finally, the efficiencies of HMUX and T-SEL are discussed by using numerical examples. Although broadband down streams are mainly considered, other streams such as IP traffics can be accommodated in the distribution systems investigated in this paper.

  • Cause of Long Spikes for Cyclotron Harmonic Waves in the Ionograms

    Toshio UTSUNOMIYA  

     
    PAPER-Electromagnetic Compatibility(EMC)

      Vol:
    E83-B No:4
      Page(s):
    838-849

    The long spikes have been often recorded at the multiples of the electron cyclotron frequency in the ionograms of the topside sounders observed in low latitudes. There has not been sufficient explanation for the physical cause for occourrence of the long spike so far. Here, by interpreting this phenomenon as receiving the trapped cyclotron harmonic wave, some analyses for the length of spike are done not only from the viewpoint of the sweeping property of the frequency spectrum of the transmitted pulse but also from that of the mutual positional relation between the propagation path and the orbit of the sounder. The cause of forming a single spike and a graphical calculation method for the long spike are proposed, respectively. Thus, the cause and the fine structure of long spike consisting of superposed spikes are clarified.

  • An Analysis of the Relationship between IDDQ Testability and D-Type Flip-Flop Structure

    Yukiya MIURA  Hiroshi YAMAZAKI  

     
    PAPER-Fault Tolerant Computing

      Vol:
    E81-D No:10
      Page(s):
    1072-1078

    This paper describes IDDQ testability for bridging faults in a variety of flip-flops. The flip-flop is a basic element of the sequential circuit and there are various structures even for the same type. In this paper, we use five kinds of master-slave D-type flip-flops as the circuit under test. Target faults are two-line resistive bridging faults extracted from a circuit layout. A flip-flop with a deliberately introduced bridging fault is simulated by the SPICE simulator. Simulation results show that IDDQ testing cannot detect faults existing at specific points in some flip-flops, and this problem depends on the flip-flop structure. However, IDDQ testing has high fault coverage ( 98%) compared with traditional logic testing. We also examine performances of fully IDDQ testable flip-flops.

  • Analysis of Decimator-Based Full-Digital Delay-Locked PN Code Tracking Loops for Bandlimited Direct-Sequence Spread-Spectrum Signals in AWGN

    Hyoungsoo LIM  Kyungwhoon CHEUN  

     
    PAPER-Mobile Communication

      Vol:
    E81-B No:10
      Page(s):
    1903-1911

    This paper analyzes first-order full-digital coherent and noncoherent PN code tracking loops for bandlimited baseband direct-sequence spread-spectrum signals under AWGN. The considered loop structures which employ a decimator to control the PN code phase have implementation advantages over loops employing higher-order interpolators. Analytic expressions are derived for the steady-state timing mean squared error, mean pull-in time, mean time to lose lock and the steady-state uncoded and coded bit error rates by employing appropriate Markov chain models. The analytical results are verified to be very accurate via computer simulations. Results are presented for BPSK spreading but extension to QPSK spreading is straightforward.

  • A Construction Manager System over an ATM Transport Network Operation System Verification of the Basic Technique of Flowthrough Operation in Configuration Management

    Hiroshi TOHJO  Tetsuya YAMAMURA  

     
    PAPER-System Implementation

      Vol:
    E80-B No:6
      Page(s):
    833-840

    We have studied the flowthrough operation to simplify operation processes and to promote the efficiency of operation flows. In this paper, we introduce the Construction Manager System (CMS) that cooperates with the ATM Transport Network Operation System (ATMOS). This system directs the construction processes using the construction tickets newly defined by the GDMO (Guidelines for the Definitions of Managed Objects); these tickets and action scenarios are prepared inside the SMS (Scenario Management System). We confirm that CMS can perform construction management using the construction tickets instead of the traditional off-line communications such as the telephone and the facsimile. Furthermore, because CMS cooperates with ATMOS, it is able to manage actual network elements (NEs) and conduct board costruction processes by using construction tickets. Moreover, CMS can confirm that the construction processes of the actual NEs have actually been executed through the Q3 interface. As a result, we verify the basic technique for flowthrough operation for configuration management.

21-40hit(47hit)