Structure tensor analysis on epipolar plane images (EPIs) is a successful approach to estimate disparity from a light field, i.e. a dense set of multi-view images. However, the disparity range allowable for the light field is limited because the estimation becomes less accurate as the range of disparities become larger. To overcome this limitation, we developed a new method called sheared EPI analysis, where EPIs are sheared before the structure tensor analysis. The results of analysis obtained with different shear values are integrated into a final disparity map through a smoothing process, which is the key idea of our method. In this paper, we closely investigate the performance of sheared EPI analysis and demonstrate the effectiveness of the smoothing process by extensively evaluating the proposed method with 15 datasets that have large disparity ranges.

Spectral compressive sensing is a novel approach that enables extraction of spectral information from a spectral-sparse signal, exclusively from its compressed measurements. Thus, the approach has received considerable attention from various fields. However, standard compressive sensing algorithms always require a sparse signal to be on the grid, whose spacing is the standard resolution limit. Thus, these algorithms severely degenerate while handling spectral compressive sensing, owing to the off-the-grid issue. Some off-the-grid algorithms were recently proposed to solve this problem, but they are either inaccurate or computationally expensive. In this paper, we propose a novel algorithm named parameterized ℓ1-minimization (PL1), which can efficiently solves the off-the-grid spectral estimation problem with relatively low computational complexity.

Existing moving object's trajectory prediction algorithms suffer from the data sparsity problem, which affects the accuracy of the trajectory prediction. Aiming to the problem, we present an Entropy-based Sparse Trajectories Prediction method enhanced by Matrix Factorization (ESTP-MF). Firstly, we do trajectory synthesis based on trajectory entropy and put synthesized trajectories into the trajectory space. It can resolve the sparse problem of trajectory data and make the new trajectory space more reliable. Secondly, under the new trajectory space, we introduce matrix factorization into Markov models to improve the sparse trajectory prediction. It uses matrix factorization to infer transition probabilities of the missing regions in terms of corresponding existing elements in the transition probability matrix. It aims to further solve the problem of data sparsity. Experiments with a real trajectory dataset show that ESTP-MF generally improves prediction accuracy by as much as 6% and 4% compared to the SubSyn algorithm and STP-EE algorithm respectively.

This paper deals with a problem to decide whether a given graph structure appears as a pattern in the structure of a given graph. A graph pattern is a triple p=(V,E,H), where (V,E) is a graph and H is a set of variables, which are ordered lists of vertices in V. A variable can be replaced with an arbitrary connected graph by a kind of hyperedge replacements. A substitution is a collection of such replacements. The graph pattern matching problem (GPMP) is the computational problem to decide whether or not a given graph G is obtained from a given graph pattern p by a substitution. In this paper, we show that GPMP for a graph pattern p and a graph G is solvable in polynomial time if the length of every variable in p is 2, p is of bounded treewidth, and G is connected.

We present a new data structure called the packed compact trie (packed c-trie) which stores a set S of k strings of total length n in nlog σ+O(klog n) bits of space and supports fast pattern matching queries and updates, where σ is the alphabet size. Assume that α=logσn letters are packed in a single machine word on the standard word RAM model, and let f(k,n) denote the query and update times of the dynamic predecessor/successor data structure of our choice which stores k integers from universe [1,n] in O(klog n) bits of space. Then, given a string of length m, our packed c-tries support pattern matching queries and insert/delete operations in $O(rac{m}{alpha} f(k,n))$ worst-case time and in $O(rac{m}{alpha} + f(k,n))$ expected time. Our experiments show that our packed c-tries are faster than the standard compact tries (a.k.a. Patricia trees) on real data sets. We also discuss applications of our packed c-tries.

With the ever-increasing number of web services registered in service communities, many users are apt to find their interested web services through various recommendation techniques, e.g., Collaborative Filtering (i.e., CF)-based recommendation. Generally, CF-based recommendation approaches can work well, when a target user has similar friends or the target services (i.e., services preferred by the target user) have similar services. However, when the available user-service rating data is very sparse, it is possible that a target user has no similar friends and the target services have no similar services; in this situation, traditional CF-based recommendation approaches fail to generate a satisfying recommendation result. In view of this challenge, we combine Social Balance Theory (abbreviated as SBT; e.g., “enemy's enemy is a friend” rule) and CF to put forward a novel data-sparsity tolerant recommendation approach Ser_RecSBT+CF. During the recommendation process, a pruning strategy is adopted to decrease the searching space and improve the recommendation efficiency. Finally, through a set of experiments deployed on a real web service quality dataset WS-DREAM, we validate the feasibility of our proposal in terms of recommendation accuracy, recall and efficiency. The experiment results show that our proposed Ser_RecSBT+CF approach outperforms other up-to-date approaches.

A bi-dimensional empirical mode decomposition (BEMD) is one of the powerful methods for decomposing non-linear and non-stationary signals without a prior function. It can be applied in many applications such as feature extraction, image compression, and image filtering. Although modified BEMDs are proposed in several approaches, computational cost and quality of their bi-dimensional intrinsic mode function (BIMF) still require an improvement. In this paper, an iteration-free computation method for bi-dimensional empirical mode decomposition, called iBEMD, is proposed. The locally partial correlation for principal component analysis (LPC-PCA) is a novel technique to extract BIMFs from an original signal without using extrema detection. This dramatically reduces the computation time. The LPC-PCA technique also enhances the quality of BIMFs by reducing artifacts. The experimental results, when compared with state-of-the-art methods, show that the proposed iBEMD method can achieve the faster computation of BIMF extraction and the higher quality of BIMF image. Furthermore, the iBEMD method can clearly remove an illumination component of nature scene images under illumination change, thereby improving the performance of text localization and recognition.

Conventional feature-rich parsers based on manually tuned features have achieved state-of-the-art performance. However, these parsers are not good at handling long-term dependencies using only the clues captured by a prepared feature template. On the other hand, recurrent neural network (RNN)-based parsers can encode unbounded history information effectively, but they perform not well for small tree structures, especially when low-frequency words are involved, and they cannot use prior linguistic knowledge. In this paper, we propose a simple but effective framework to combine the merits of feature-rich transition-based parsers and RNNs. Specifically, the proposed framework incorporates RNN-based scores into the feature template used by a feature-rich parser. On English WSJ treebank and SPMRL 2014 German treebank, our framework achieves state-of-the-art performance (91.56 F-score for English and 83.06 F-score for German), without requiring any additional unlabeled data.

This paper presents a system for the automatic generation of Galois-field (GF) arithmetic circuits, named the GF Arithmetic Module Generator (GF-AMG). The proposed system employs a graph-based circuit description called the GF Arithmetic Circuit Graph (GF-ACG). First, we present an extension of the GF-ACG to handle GF(pm) (p≥3) arithmetic circuits, which can be efficiently implemented by multiple-valued logic circuits in addition to the conventional binary circuits. We then show the validity of the generation system through the experimental design of GF(pm) multipliers for different p-values. In addition, we evaluate the performance of three types of GF(2m) multipliers and typical GF(pm) multipliers (p≥3) empirically generated by our system. We confirm from the results that the proposed system can generate a variety of GF parallel multipliers, including practical multipliers over GF(pm) having extension degrees greater than 128.

Detecting signals in a very large multiple-input multiple-output (MIMO) system requires high complexy of implementation. Thus, belief propagation based detection has been studied recently because of its low complexity. When the transmitted signal sequence is encoded using a channel code decodable by a factor-graph-based algorithm, MIMO signal detection and channel decoding can be combined in a single factor graph. In this paper, a low density parity check (LDPC) coded MIMO system is considered, and two types of factor graphs: bipartite and tripartite graphs are compared. The former updates the log-likelihood-ratio (LLR) values at MIMO detection and parity checking simultaneously. On the other hand, the latter performs the updates alternatively. Simulation results show that the tripartite graph achieves faster convergence and slightly better bit error rate performance. In addition, it is confirmed that the LLR damping in LDPC decoding is important for a stable convergence.

In the topologies for interconnected nodes, it is desirable to have a low degree and a small diameter. For the same number of nodes, a dual-cube topology has almost half the degree compared to a hypercube while increasing the diameter by just one. Hence, it is a promising topology for interconnection networks of massively parallel systems. We propose here a stochastic fault-tolerant routing algorithm to find a non-faulty path from a source node to a destination node in a dual-cube.

To overcome the false lock or detection missing problems caused by the multiple peaks of the auto-correlation function (ACF) of Binary Offset Carrier (BOC) modulated signal, an acquisition algorithm based on unit correlation for BOC(n,n) signal is proposed in this paper. The local BOC signal is separated into two unit signals, an odd one and an even one. Then a reconstruction of the unit correlation functions between the unit signals and the received BOC signal is performed and M sections of reconstructed correlation function are accumulated according to the non-coherent method, so that this novel acquisition algorithm can not only eliminate the multiple secondary peaks, but also retain the advantage of the narrow correlation main peak. Simulation results show that the acquisition sensitivity of the proposed algorithm is increased 3dBHz compared with the ASPeCT method, and the computation cost is only 41.46% of the ASPeCT method when M=2.

This paper proposes Deep Neural Network (DNN)-based Voice Conversion (VC) using input-to-output highway networks. VC is a speech synthesis technique that converts input features into output speech parameters, and DNN-based acoustic models for VC are used to estimate the output speech parameters from the input speech parameters. Given that the input and output are often in the same domain (e.g., cepstrum) in VC, this paper proposes a VC using highway networks connected from the input to output. The acoustic models predict the weighted spectral differentials between the input and output spectral parameters. The architecture not only alleviates over-smoothing effects that degrade speech quality, but also effectively represents the characteristics of spectral parameters. The experimental results demonstrate that the proposed architecture outperforms Feed-Forward neural networks in terms of the speech quality and speaker individuality of the converted speech.

The Möbius cube is a variant of the hypercube. Its advantage is that it can connect the same number of nodes as a hypercube but with almost half the diameter of the hypercube. We propose an algorithm to solve the node-to-node disjoint paths problem in n-Möbius cubes in polynomial-order time of n. We provide a proof of correctness of the algorithm and estimate that the time complexity is O(n2) and the maximum path length is 3n-5.

This paper presents a high-throughput sliding block Viterbi decoder for IEEE 802.11ac systems. A 64-state bidirectional sliding block Viterbi method is proposed to meet the speed requirement of the system. The decoder throughput goes up to 640Mbps, which can be further increased by adding the block parallelism. Moreover, a modified add-compare-select (ACS) unit is designed to enhance the working frequency. The modified ACS unit obtains nearly 26% speed-up, compared to the conventional ACS unit. However, the area overhead and power dissipation are almost the same. The decoder is designed in a SMIC 0.13µm technology, and it occupies 1.96mm2 core area and 105mW power consumption with an energy efficiency of 0.1641nJ/bit with a 1.2V voltage supply.

With the availability of virtualization extension in mobile processors, e.g. ARM Cortex A-15, multiple virtual execution domains are efficiently supported in a mobile platform. Each execution domain requires high-performance graphics services for full-featured user interfaces such as smooth scrolling, background image blurring, and 3D images. However, graphics service is hard to be virtualized because multiple service components (e.g. ION and Fence) are involved. Moreover, the complexity of Graphical Processing Unit (GPU) device driver also makes harder virtualizing graphics service. In this paper, we propose a technique to virtualize the graphics architecture of Android mobile platform in KVM/ARM environment. The Android graphics architecture relies on underlying Linux kernel services such as the frame buffer memory allocator ION, the buffer synchronization service Fence, GPU device driver, and the display synchronization service VSync. These kernel services are provided as device files in Linux kernel. Our approach is to para-virtualize these device files based on a split device driver model. A major challenge is to translate guest-view of information into host-view of information, e.g. memory address translation, file descriptor management, and GPU Memory Management Unit (MMU) manipulation. The experimental results show that the proposed graphics virtualization technique achieved almost 84%-100% performance of native applications.

Bayesian networks are a powerful approach for representation and reasoning under conditions of uncertainty. Of the many good algorithms for learning Bayesian networks from data, the bio-inspired search algorithm is one of the most effective. In this paper, we propose a hybrid mutual information-modified binary particle swarm optimization (MI-MBPSO) algorithm. This technique first constructs a network based on MI to improve the quality of the initial population, and then uses the decomposability of the scoring function to modify the BPSO algorithm. Experimental results show that, the proposed hybrid algorithm outperforms various other state-of-the-art structure learning algorithms.

When the random variable has a completely monotone density function, we call it bursty (BRST) random variable. At first, we prove that the entropy of inter-arrival time is smaller than or equal to the entropy of inter-departure time in an infinite-server system GI/GI/∞ having general renewal arrivals. On the basis of that result, we prove that a BRST/GI/∞ having bursty arrivals and the associated loss system BRST/GI/c/c have the following paradoxical behavior: In the BRST/GI/∞, the stationary number of customers as well as the inter-departure time become stochastically less variable, as the service time becomes stochastically more variable. Also for the loss system BRST/GI/c/c, the blocking probability decreases and the inter-departure time becomes stochastically less variable, as the service time becomes stochastically more variable.

This paper presents an ontology-based driving decision making system, which can promptly make safety decisions in real-world driving. Analyzing sensor data for improving autonomous driving safety has become one of the most promising issues in the autonomous vehicles research field. However, representing the sensor data in a machine understandable format for further knowledge processing still remains a challenging problem. In this paper, we introduce ontologies designed for autonomous vehicles and ontology-based knowledge base, which are used for representing knowledge of maps, driving paths, and perceived driving environments. Advanced Driver Assistance Systems (ADAS) are developed to improve safety of autonomous vehicles by accessing to the ontology-based knowledge base. The ontologies can be reused and extended for constructing knowledge base for autonomous vehicles as well as for implementing different types of ADAS such as decision making system.

This letter proposes a heuristic algorithm to select check variables, which are points of comparison for error detection, for soft-error tolerant datapaths. Our soft-error tolerance scheme is based on check-and-retry computation and an efficient resource management named speculative resource sharing (SRS). Starting with the smallest set of check variables, the proposed algorithm repeats to add new check variable one by one incrementally and find the minimum latency solution among the series of generated solutions. During the process, each new check variable is selected so that the opportunity of SRS is enlarged. Experimental results show that improvements in latency are achieved compared with the choice of the smallest set of check variables.