Superconducting nanowire single-photon detectors(SSPDs or SNSPDs) can detect single photons in a wide spectrum range from ultraviolet to mid-infrared wavelengths. We developed SSPDs for the light wavelength of 900-1100 nm, where it is difficult to achieve high detection efficiency by either Si or InGaAs avalanche photodiodes. We designed and fabricated the SSPD with non-periodic dielectric multilayers (DMLs) composed of SiO2 and TiO2 to enhance the optical absorptance in the wavelength range of 900-1100 nm. We measured the detection efficiency (DE) in the wavelength range of 800-1360 nm using a supercontinuum light source and found that the wavelength dependence of DE was in good agreement with the simulated spectrum of the optical absorptance of the nanowire device on the designed DML. The highest system DE was 81.0% for the wavelength of 980 nm.

This paper proposes a temporal domain difference based secondary background modeling algorithm for surveillance video coding. The proposed algorithm has three key technical contributions as following. Firstly, the LDBCBR (Long Distance Block Composed Background Reference) algorithm is proposed, which exploits IBBS (interval of background blocks searching) to weaken the temporal correlation of the foreground. Secondly, both BCBR (Block Composed Background Reference) and LDBCBR are exploited at the same time to generate the temporary background reference frame. The secondary modeling algorithm utilizes the temporary background blocks generated by BCBR and LDBCBR to get the final background frame. Thirdly, monitor the background reference frame after it is generated is also important. We would update the background blocks immediately when it has a big change, shorten the modeling period of the areas where foreground moves frequently and check the stable background regularly. The proposed algorithm is implemented in the platform of IEEE1857 and the experimental results demonstrate that it has significant improvement in coding efficiency. In surveillance test sequences recommended by the China AVS (Advanced Audio Video Standard) working group, our method achieve BD-Rate gain by 6.81% and 27.30% comparing with BCBR and the baseline profile.

We present a constant-size signature scheme under the CDH assumption. It has a tighter security reduction than any other constant-size signature scheme with a security reduction to solving some intractable search problems. Hofheinz, Jager, and Knapp (PKC 2012) presented a constant-size signature scheme under the CDH assumption with a reduction loss of O(q), where q is the number of signing queries. They also proved that the reduction loss of O(q) is optimal in a black-box security proof. To the best of our knowledge, no constant-size signature scheme has been proposed with a tighter reduction (to the hardness of a search problem) than that proposed by Hofheinz et al., even if it is not re-randomizable. We remark that our scheme is not re-randomizable. We achieve the reduction loss of O(q/d), where d is the number of group elements in a public key.

High frame rate and ultra-low delay matching system plays an important role in various human-machine interactive applications, which demands better performance in matching deformable and out-of-plane rotating objects. Although many algorithms have been proposed for deformation tracking and matching, few of them are suitable for hardware implementation due to complicated operations and large time consumption. This paper proposes a hardware-oriented template update and recovery method for high frame rate and ultra-low delay deformation matching system. In the proposed method, the new template is generated in real time by partially updating the template descriptor and adding new keypoints simultaneously with the matching process in pixels (proposal #1), which avoids the large inter-frame delay. The size and shape of region of interest (ROI) are made flexible and the Hamming threshold used for brute-force matching is adjusted according to pixel position and the flexible ROI (proposal #2), which solves the problem of template drift. The template is recovered by the previous one with a relative center-shifting vector when it is judged as lost via region-wise difference check (proposal #3). Evaluation results indicate that the proposed method successfully achieves the real-time processing of 784fps at the resolution of 640×480 on field-programmable gate array (FPGA), with a delay of 0.808ms/frame, as well as achieves satisfactory deformation matching results in comparison with other general methods.

The windowed interpolation DFT methods have been utilized to estimate the parameters of a single frequency and multi-frequency signal. Nevertheless, they do not work well for the real-valued sinusoids with closely spaced positive- and negative- frequency. In this paper, we describe a novel three-point windowed interpolation DFT method for frequency measurement of real-valued sinusoid signal. The exact representation of the windowed DFT with maximum sidelobe decay window (MSDW) is constructed. The spectral superposition of positive- and negative-frequency is considered and calculated to improve the estimation performance. The simulation results match with the theoretical values well. In addition, computer simulations demonstrate that the proposed algorithm provides high estimation accuracy and good noise suppression capability.

Many studies have revealed that the performance of software-based Virtual Network Functions (VNFs) is insufficient for mission-critical networks. Scaling-out approaches, such as auto-scaling of VNFs, could handle a huge amount of traffic; however, the exponential traffic growth confronts us the limitations of both expandability of physical resources and complexity of their management. In this paper, we propose a fast datapath processing method called Packet Aggregation Flow (PA-Flow) that is based on hop-by-hop packet aggregation for more efficient Service Function Chaining (SFC). PA-Flow extends a notion of existing intra-node packet aggregation toward network-wide packet aggregation, and we introduce following three novel features. First, packet I/O overheads at intermediate network devices including NFV-nodes are mitigated by reduction of packet amount. Second, aggregated packets are further aggregated as going through the service chain in a hop-by-hop manner. Finally, next-hop aware packet aggregation is realized using OpenFlow-based flow tables. PA-Flow is designed to be available with various VNF forms (e.g. VM/container/baremetal-based) and virtual I/O technologies (e.g. vhost-user/SR-IOV), and its implementation does not bring noticeable delay for aggregation. We conducted two evaluations: (i) a baseline evaluation for understanding fundamental performance characteristics of PA-Flow (ii) a simulation-based SFC evaluation for proving PA-Flow's effect in a realistic environment. The results showed that throughput of short packet forwarding was improved by 4 times. Moreover, the total number of packets was reduced by 93% in a large-scale SFC.

Although correlation filter-based trackers have demonstrated excellent performance for visual object tracking, there remain several challenges to be addressed. In this work, we propose a novel tracker based on the correlation filter framework. Traditional trackers face difficulty in accurately adapting to changes in the scale of the target when the target moves quickly. To address this, we suggest a scale adaptive scheme based on prediction scales. We also incorporate a speed-based adaptive model update method to further improve overall tracking performance. Experiments with samples from the OTB100 and KITTI datasets demonstrate that our method outperforms existing state-of-the-art tracking algorithms in fast motion scenes.

Today, trust plays a central role in services in distributed environments. Conventionally deployed trust has been based on static framework in which a server responds to a service request under statically determined policies. However, in accordance with evolution of distributed environments empowered with IoT and federated access mechanisms, dynamic behavior must be analyzed and taken into service provision, which conventional trust cannot properly handle. In this paper, we propose an extension of PDP (Policy Decision Point) in which assertions together with service requests are evaluated. Furthermore, the evaluation may be dynamically configured in dynamically evolving trust environment. We propose an elastic trust model in view of dynamic trust environment. This enables intuitionistic modeling of typical concrete elastic distributed services.

This paper investigates the wireless information surveillance in a suspicious millimeter wave (mmWave) wireless communication system via the spoofing relay based proactive eavesdropping approach. Specifically, the legitimate monitor in the system acts as a relay to simultaneously eavesdrop and send spoofing signals to vary the source transmission rate. To maximize the effective eavesdropping rate, an optimization problem for both hybrid precoding design and power distribution is formulated. Since the problem is fractional and non-convex, we resort to the Dinkelbach method to equivalently reduce the original problem into a series of non-fractional problems, which is still coupling. Afterwards, based on the BCD-type method, the non-fractional problem is reduced to three subproblems with two introduced parameters. Then the GS-PDD-based algorithm is proposed to obtain the optimal solution by alternately optimizing the three subproblems and simultaneously updating the introduced parameters. Numerical results verify the effectiveness and superiority of our proposed scheme.

As IT systems, including network systems using SDN/NFV technologies, become large-scaled and complicated, the cost of system management also increases rapidly. Network operators have to maintain their workflow in constructing and consistently updating such complex systems, and thus these management tasks in generating system update plan are desired to be automated. Declarative system update with state space search is a promising approach to enable this automation, however, the current methods is not enough scalable to practical systems. In this paper, we propose a novel heuristic approach to greatly reduce computation time to solve system update procedure for practical systems. Our heuristics accounts for structural bottleneck of the system update and advance search to resolve bottlenecks of current system states. This paper includes the following contributions: (1) formal definition of a novel heuristic function specialized to system update for A* search algorithm, (2) proofs that our heuristic function is consistent, i.e., A* algorithm with our heuristics returns a correct optimal solution and can omit repeatedly expansion of nodes in search spaces, and (3) results of performance evaluation of our heuristics. We evaluate the proposed algorithm in two cases; upgrading running hypervisor and rolling update of running VMs. The results show that computation time to solve system update plan for a system with 100 VMs does not exceed several minutes, whereas the conventional algorithm is only applicable for a very small system.

Electrophoretic deposition (EPD) usingpolydimethylsiloxane(PDMS)-based organic-inorganic hybrid materials as binders can be used to prepare alumina-binder composites on metal substrates. Herein, we investigated the deposition mechanism of PDMS-based polymers. The composition and porosity of EPD composites can be controlled by adjusting the EPD condition, and shape of alumina particles.

Copper (Cu) electroless plating was conducted on planar and microstructured polydimethylsiloxane (PDMS) substrates. In this study, organic thin films terminated with nitrogen (N)-containing groups, e.g. poly (dimethylaminoethyl methacrylate) brush (PDMAEMA), aminopropyl trimethoxysilane monolayer (APTES), and polydopamine (PDA) were used to anchor palladium (Pd) catalyst. While electroless plating was successfully promoted on all sample surfaces, PDMAEMA was found to achieve the best adhesion strength to the PDMS surfaces, compared to APTES- and PDA-covered PDMS substrates, due to covalent bonding, anchoring effects of polymer chains as well as high affinity of N atoms to Pd species. Our process was also successfully applied to the electroless plating of microstructured PDMS substrates.

We introduce a notion of watermarking for cryptographic functions and propose a concrete scheme for watermarking cryptographic functions. Informally speaking, a digital watermarking scheme for cryptographic functions embeds information, called a mark, into functions such as one-way functions and decryption functions of public-key encryption. There are two basic requirements for watermarking schemes. A mark-embedded function must be functionally equivalent to the original function. It must be difficult for adversaries to remove the embedded mark without damaging the original functionality. In spite of its importance and usefulness, there have only been a few theoretical works on watermarking for functions (or programs). Furthermore, we do not have rigorous definitions of watermarking for cryptographic functions and concrete constructions. To solve the problem above, we introduce a notion of watermarking for cryptographic functions and define its security. Furthermore, we present a lossy trapdoor function (LTF) based on the decisional bilinear Diffie-Hellman problem problem and a watermarking scheme for the LTF. Our watermarking scheme is secure under the symmetric external Diffie-Hellman assumption in the standard model. We use techniques of dual system encryption and dual pairing vector spaces (DPVS) to construct our watermarking scheme. This is a new application of DPVS.

Kernel updates are a part of daily life in contemporary computer systems. They usually require an OS reboot that involves restarting not only the kernel but also all of the running applications, causing downtime that can disrupt software services. This downtime issue has been tackled by numerous approaches. Although dynamic translation of the running kernel image, which is a representative approach, can conduct kernel updates at runtime, its applicability is inherently limited. This paper describes Dwarf, which shortens downtime during kernel updates and covers more types of updates. Dwarf launches the newer kernel in the background on the same physical machine and forces the kernel to inherit the running states of the older kernel. We implemented a prototype of Dwarf on Xen 4.5.2, Linux 2.6.39, Linux 3.18.35, and Linux 4.1.6. Also, we conducted experiments using six applications, such as Apache, MySQL, and memcached, and the results demonstrate that Dwarf's downtime is 1.8 seconds in the shortest case and up to 10× shorter than that of the normal OS reboot.

Most state-of-the-art discriminative tracking approaches are based on either template appearance models or statistical appearance models. Despite template appearance models have shown excellent performance, they perform poorly when the target appearance changes rapidly. In contrast, statistic appearance models are insensitive to fast target state changes, but they yield inferior tracking results in challenging scenarios such as illumination variations and background clutters. In this paper, we propose an adaptive object tracking approach with complementary models based on template and statistical appearance models. Both of these models are unified via our novel combination strategy. In addition, we introduce an efficient update scheme to improve the performance of our approach. Experimental results demonstrate that our approach achieves superior performance at speeds that far exceed the frame-rate requirement on recent tracking benchmarks.

Sparse code multiple access (SCMA) based on the message passing algorithm (MPA) for multiuser detection is a competitive non-orthogonal multiple access technique for fifth-generation wireless communication networks Among the existing multiuser detection schemes for uplink (UP) SCMA systems, the serial MPA (S-MPA) scheme, where messages are updated sequentially, generally converges faster than the conventional MPA (C-MPA) scheme, where all messages are updated in a parallel manner. In this paper, the optimization of message scheduling in the S-MPA scheme is proposed. Firstly, some statistical results for the probability density function (PDF) of the received signal are obtained at various signal-to-noise ratios (SNR) by using the Monte Carlo method. Then, based on the non-orthogonal property of SCMA, the data mapping relationship between resource nodes and user nodes is comprehensively analyzed. A partial codeword transmission of S-MPA (PCTS-MPA) with threshold decision scheme of PDF is proposed and verified. Simulations show that the proposed PCTS-MPA not only reduces the complexity of MPA without changing the bit error ratio (BER), but also has a faster convergence than S-MPA, especially at high SNR values.

Sparse representation has been widely applied to visual tracking for several years. In the sparse representation framework, tracking problem is transferred into solving an L1 minimization issue. However, during the tracking procedure, the appearance of target was affected by external environment. Therefore, we proposed a robust tracking algorithm based on the traditional sparse representation jointly particle filter framework. First, we obtained the observation image set from particle filter. Furthermore, we introduced a 2D transformation on the observation image set, which enables the tracking target candidates set more robust to handle misalignment problem in complex scene. Moreover, we adopt the occlusion detection mechanism before template updating, reducing the drift problem effectively. Experimental evaluations on five public challenging sequences, which exhibit occlusions, illuminating variations, scale changes, motion blur, and our tracker demonstrate accuracy and robustness in comparisons with the state-of-the-arts.

One of the most promising compression methods for XML documents is the one that translates a given document to a tree grammar that generates it. A feature of this compression is that the internal structures are kept in production rules of the grammar. This enables us to directly manipulate the tree structure without decompression. However, previous studies assume that a given XML document does not have data values because they focus on direct retrieval and manipulation of the tree structure. This paper proposes a direct update method for XML documents with data values and shows the effectiveness of the proposed method based on experiments conducted on our implemented tool.

In this paper, we have investigated the PdEr-silicide formation utilizing a developed PdEr-alloy target for sputtering, and evaluated the contact resistivity of PdEr-silicide layer formed on n-Si(100) by dopant segregation process for the first time. Pd2Si and ErSi2 have same hexagonal structure, while the Schottky barrier height for electron (Φbn) is different as 0.75 eV and 0.28 eV, respectively. A 20 nm-thick PdEr-alloy layer was deposited on the n-Si(100) substrates utilizing a developed PdEr-alloy target by the RF magnetron sputtering at room temperature. Then, 10 nm-thick TiN encapsulating layer was in-situ deposited at room temperature. Next, silicidation was carried out by the RTA at 500 for 5 min in N2/4.9%H2 followed by the selective etching. From the J-V characteristics of fabricated Schottky diode, qΦbn was reduced from 0.75 eV of Pd2Si to 0.43 eV of PdEr-silicide. Furthermore, 4.0x10-8Ωcm2 was extracted for the PdEr-silicide to n-Si(100) by the dopant segregation process.

This paper proposes a method for reducing the peak-to-average power ratio (PAPR) at the output signal of a digital predistortion linearizer (DPDL) that compensates for frequency dependent intermodulation distortion (IMD) components. The proposed method controls the amplitude and phase values of the frequency components corresponding to the transmission bandwidth of the output signal. A DPDL employing the proposed method simultaneously provides IMD component cancellation of out-of-band components and PAPR reduction at the output signal. This paper identifies the amplitude and phase conditions to minimize the PAPR. Experimental results based on a 2-GHz band 1-W class power amplifier show that the proposed method improves the drain efficiency of the power amplifier when degradation is allowed in the error vector magnitude. To the best knowledge of the authors, this is the first PAPR reduction method for DPDL that reduces the PAPR while simultaneously compensating for IMD components.