In this paper, we study Wi-Fi mesh networks (WMNs) as a promising candidate for wireless networking infrastructure that interconnects a variety of access networks. The main performance bottleneck of a WMN is their limited capacity due to the packet collision from the contention-based IEEE 802.11s MAC. To mitigate this problem, we present the distributed link-activation (DLA) protocol which activates a set of collision-free links for a fixed amount of time by exchanging a few control packets between neighboring MRs. Through the rigorous proof, it is shown that the upper bound of the DLA rounds is O(Smax), where Smax is the maximum number of (simultaneous) interference-free links in a WMN topology. Based on the DLA, we also design the distributed throughput-maximal scheduling (D-TMS) scheme which overlays the DLA protocol on a new frame architecture based on the IEEE 802.11 power saving mode. To mitigate its high latency, we propose the D-TMS adaptive data-period control (D-TMS-ADPC) that adjusts the data period depending on the traffic load of a WMN. Numerical results show that the D-TMS-ADPC scheme achieves much higher throughput performance than the IEEE 802.11s MAC.

This study involves proposing a high-speed computer-generated hologram playback by using a digital micromirror device for high-definition spatiotemporal division multiplexing electroholography. Consequently, the results indicated that the study successfully reconstructed a high-definition 3-D movie of 3-D objects that was comprised of approximately 900,000 points at 60 fps when each frame was divided into twelve parts.

This paper aims to support quick and easy page access in digital documents. We tried to use a paper book as a device to navigate pages for digital documents. Our proposed system allows the users to perform the same interaction as a paper book such as inserting fingers among pages or folding an edge of the page as a dog-ear. Three experiments were conducted to confirm the effectiveness of the proposed system. As a result, we confirmed our proposed system was superior to conventional navigation methods especially in moving back and forth among pages.

Massive amounts of computation involved in real-time evaluation of deep neural networks pose a serious challenge in battery-powered systems, and neuromorphic systems specialized in neural networks have been developed. This paper first shows the portion of active neurons at a time dwindles as going toward the output layer in recent large-scale deep convolutional neural networks. Spike-based, asynchronous neuromorphic systems take advantage of the sparse activation and reduce dynamic power consumption, while synchronous systems may waste much dynamic power even for the sparse activation due to clocks. We thus propose a clock gating-based dynamic power reduction method that exploits the sparse activation for synchronous neuromorphic systems. We apply the proposed method to a building block of a recently proposed synchronous neuromorphic computing system and demonstrate up to 79% dynamic power saving at a negligible overhead.

A plasma lighting system (PLS) using a solid-state (SS) radio frequency (RF) power amplifier (PA) is one of the promising lighting systems due to its excellent light characteristics and power efficiency. To improve the efficacy and reduce the adjacent channel interference of the PLS, a method to generate a band-limited pulsed-RF signal using the limited number of multi-tone signals is proposed. A 2.49 GHz PLS with a 300W gallium-nitride (GaN) SSPA is implemented, and it is used to verify the proposed method. The PLS using the proposed method shows better performance compared with those using conventional pulsed-RF signal.

In this paper, an improved lattice reduction (LR)-aided soft-output multiple-input multiple-output (MIMO) detector is proposed. Conventional LR-aided soft-output MIMO detectors involve the empty set problem (ESP), in which an entry with a particular bit in the candidate list might not exist. To overcome the performance degradation resulting from this ESP, a post-processing algorithm that modifies the candidate list is proposed. The proposed algorithm efficiently resolves the ESP by utilizing the near-orthogonality of the lattice-reduced system model so that the bit error rate (BER) performance is enhanced. In addition, as the complexity of the candidate list generation is reduced with the aid of the post-processing algorithm, the overall complexity is also reduced. Simulation results and the complexity comparisons demonstrate that our proposed method lowers the required Eb/No by 4-5 dB at the BER of 10-5 and the complexity by 13%-55%, compared to the conventional method.

Wireless Ad hoc networks have been rapidly developed in recent years since they promise a wide range of applications. However, their structures, which are based on the IEEE 802.11 standard, cause a severe unfairness problem in bandwidth sharing among different users. This is an extreme drawback because in wireless ad hoc networks, all users need to be treated fairly regardless of their geographical positions. In this paper, we propose a method to improve the fairness among flows by sensing channel access of other nodes based on the information obtained at the link layer and then, controlling the packet sending rate from the link layer to the MAC layer and the dequeue rate from the queue. Simulation results show that the proposed method achieves a better fairness with a good total throughput compared to conventional methods.

Smart card payment systems provide a convenient billing mechanism for public transportation providers and passengers. In this paper, a smart card-based transit log is used to reveal functionally related regions in a city, which are called zones. To discover significant zones based on the transit log data, two algorithms, minimum spanning trees and agglomerative hierarchical clustering, are extended by considering the additional factors of geographical distance and adjacency. The hierarchical spatial geocoding system, called Geohash, is adopted to merge nearby bus stops to a region before zone discovery. We identify different urban zones that contain functionally interrelated regions based on passenger trip data stored in the smart card-based transit log by manipulating the level of abstraction and the adjustment parameters.

This paper aims to propose a Fallback Control System isolated from cyber-attacks against networked control systems. The fallback control system implements maintaining functionality after an incident. Since cyber-attacks tamper with the communication contents of the networked control systems, the fallback control system is installed in a control target side. The fallback control system detects the incident without the communication contents on field network. This system detects an incident based on a bilinear observer and a switched Lyapunov function. When an incident is detected, normal operation is switched to fallback operation automatically. In this paper, a practical experiment with Ball-Sorter simulating a simple defective discriminator as a part of Factory Automation systems is shown. Assumed cyber-attacks against Ball-Sorter are Man In The Middle attack and Denial of Service attack.

In this paper, we introduce a new method to remove random-valued impulse noise in an image. Random-valued impulse noise replaces the pixel value at a random position by a random value. Due to the randomness of the noisy pixel values, it is difficult to detect them by comparison with neighboring pixels, which is used in many conventional methods. Then we improve the recent noise detector which uses a non-local search of similar structure. Next we propose a new noise removal algorithm by sparse representation using DCT basis. Furthermore, the sparse representation can remove impulse noise by using the neighboring similar image patch. This method has much more superior noise removal performance than conventional methods at images. We confirm the effectiveness of the proposed method quantitatively and qualitatively.

A fast parameter estimation method with a coarse estimation and a fine estimation for polyphase P coded signals is proposed. For a received signal with N sampling points, the proposed method has an improved performance when the signal-to-noise ratio (SNR) is larger than 2dB and a lower computational complexity O(N logs N) compared with the latest time-frequency rate estimation method whose computational complexity is O(N2).

The secret document leakage incidents have raised awareness for the need to better security mechanisms. A leading cause of the incidents has been due to accidental disclosure through via removable storage devices. As a remedy to the issue, many organizations have been employing private cloud platform or virtual desktop infrastructure (VDI) to prevent the leakage of the secret documents. In spite of the various security benefits of cloud-based infrastructure, there are still challenges to prevent the secret document leakage incidents. In this paper, we present a novel scheme, called Doc-Trace, to provide an end-to-end traceability for the secret documents by inserting steganographic pattern into unused regions of the secret documents on private cloud and VDI platforms. We devise a computationally efficient storage scanning mechanism for providing end-to-end traceability for the storage scanning can be performed in an event-driven manner since a steganographic mark are encoded into a well-regulated offset address of the storage, which decrease the computation overhead drastically. To evaluate the feasibility of the proposed scheme, this work has been undertaken on a real cloud platform based on OpenStack.

The application of Intelligent Transport Systems (ITS) transmits data with road-to-vehicle communication (RVC) and inter-vehicle communication (IVC). Digital signature is essential to provide security for RVC and IVC. The public key certificate is used to verify that a public key belongs to an individual prover such as user or terminal. A certificate revocation list (CRL) is used for verifying validity of the public key certificate. A certificate authority (CA) publishes a CRL and distributes it to vehicles. CRL distribution traffic disturbs ITS application traffic because of sharing wireless channel between them. To distribute it on low bit rate will help to ease the disturbance. Although multiplex transmitting is effective in reliable communication, a duplication of received packets is waste of bandwidth as a consequence. This paper proposes a CRL distribution scheme based on random network coding which can reduce duplicate packets. The simulation results show that the number of duplicate packets of the proposed scheme is less than that of a simple error correction (EC)-based scheme and the proposed one can distribute CRL to more vehicles than EC-based ones.

This paper presents a low-latency, low-cost architecture for computing square and cube roots in the fixed-point format. The proposed architecture is designed based on a non-iterative root calculation scheme to achieve fast computations. While previous non-iterative root calculators are restricted to a square-root operation due to the limitation of their mathematical property, the root computation is generalized in this paper to apply an approximation method to the non-iterative scheme. On top of that, a recurrent method is proposed to select parameters, which enables us to reduce the table size while keeping the maximum relative error value low. Consequently, the proposed root calculator can support both square and cube roots at the expense of small delay and low area overheads. This extension can be generalized to compute the nth roots, where n is a positive integer.

This paper presents past and recent trends of optical networks and addresses the future directions. First, we describe path networks with the historical backgrounds and trends. path networks have advanced by using various multiplexing technologies. They include time-division multiplexing (TDM), asynchronous transfer mode (ATM), and wavelength-division multiplexing (WDM). ATM was later succeeded to multi-protocol label switching (MPLS). Second, we present generalized MPLS technologies (GMPLS). In GMPLS, the label concept of MPLS is extended to other labels used in TDM, WDM, and fiber networks. GMPLS enables network operators to serve networks deployed by different technologies with a common protocol suite of GMPLS. Third, we describe multi-layer traffic engineering and a path computation element (PCE). Multi-layer traffic engineering designs and controls networks considering resource usages of more than one layer. This leads to use network resources more efficiently than the single-layer traffic engineering adopted independently for each layer. PCE is defined as a network element that computes paths, which are used for traffic engineering. Then, we address software-defined networks, which put the designed network functions into the programmable data plane by way of the management plane. We describe the evaluation from GMPLS to software defined networking (SDN) and transport SDN. Fifth, we describe the advanced devices and switches for optical networks. Finally, we address advances in networking technologies and future directions on optical networking.

The Euler number of a binary image is an important topological property for pattern recognition, image analysis, and computer vision. A famous method for computing the Euler number of a binary image is by counting certain patterns of bit-quads in the image, which has been improved by scanning three rows once to process two bit-quads simultaneously. This paper studies the bit-quad-based Euler number computing problem. We show that for a bit-quad-based Euler number computing algorithm, with the increase of the number of bit-quads being processed simultaneously, on the one hand, the average number of pixels to be checked for processing a bit-quad will decrease in theory, and on the other hand, the length of the codes for implementing the algorithm will increase, which will make the algorithm less efficient in practice. Experimental results on various types of images demonstrated that scanning five rows once and processing four bit-quads simultaneously is the optimal tradeoff, and that the optimal bit-quad-based Euler number computing algorithm is more efficient than other Euler number computing algorithms.

Authors previously studied the degradation of electrical contacts under the condition of various external micro-oscillations. They also developed a micro-sliding mechanism (MSM2), which causes micro-sliding and is driven by a piezoelectric actuator and elastic hinges. Using the mechanism, experimental results were obtained on the minimal sliding amplitude (MSA) required to make the electrical resistance fluctuate under various conditions. In this paper, to develop a more realistic model of input waveform than the previous one, Ts/2 is set as the rising or falling time, Tc as the flat time, and τ/2 as the duration in a sliding period T (0.25 s) of the input waveform. Using the Duhamel's integral method and an optimization method, the physical parameters of natural angular frequency ω0 (12000 s-1), damping ratio ζ (0.05), and rising and falling time Ts (1.3 or 1.2 ms) are obtained. Using the parameters and the MSA, the total acceleration of the input TA (=f(t)) and the displacement of the output x(t) are also obtained using the Fourier series expansion method. The waveforms x(t) and the experimental results are similar to each other. If the effective mass m, which is defined as that of the movable parts in the MSM2, is 0.1 kg, each total force TF (=2mTA) is estimated from TA and m. By the TF, the cases for 0.3 N/pin as frictional force or in impulsive as input waveform are more serious than the others. It is essential for the safety and the confidence of electrical contacts to evaluate the input waveform and the frictional force. The ringing waveforms of the output displacements x(t) are calculated at smaller values of Ts (1.0, 0.5, and 0.0 ms) than the above values (1.3 or 1.2 ms). When Ts is slightly changed from 1.3 or 1.2 ms to 1.0 ms, the ringing amplitude is doubled. For the degradation of electrical contacts, it is essential that Ts is reduced in a rectangular and impulsive input. Finally, a very simple wear model comprising three stages (I, II, and III) is introduced in this paper. Because Ts is much shorter in a rectangular or impulsive input than in a sinusoidal input, it is considered that the former more easily causes wear than the latter owing to a larger frictional force. Taking the adhesive wear in Stages I and III into consideration, the wear is expected to be more severe in the case of small damped oscillations owing to the ringing phenomenon.

Asymmetric bilinear maps using Type-3 pairings are known to be advantageous in several points (e.g., the speed and the size of a group element) to symmetric bilinear maps using Type-1 pairings. Kremer and Mazaré introduce a symbolic model to analyze protocols based on bilinear maps, and show that the symbolic model is computationally sound. However, their model only covers symmetric bilinear maps. In this paper, we propose a new symbolic model to capture asymmetric bilinear maps. Our model allows us to analyze security of various protocols based on asymmetric bilinear maps (e.g., Joux's tripartite key exchange, and Scott's client-server ID-based key exchange). Also, we show computational soundness of our symbolic model under the decisional bilinear Diffie-Hellman assumption.

Broadband satellites, operating at Ka band and above, are playing more and more important roles in future satellite networks. Meanwhile, rain attenuation is the dominant impairment in these bands. In this context, a dynamic power allocation scheme based on rain attenuation prediction is proposed. By this scheme, the system can dynamically adjust the allocated power according to the time-varying predicted rain attenuation. Extensive simulation results demonstrate the improvement of the dynamic scheme over the static allocation. It can be concluded that the allocated capacities match the traffic demands better by introducing such dynamic power allocation scheme and the waste of power resources is also avoided.

A bi-dimensional empirical mode decomposition (BEMD) is one of the powerful methods for decomposing non-linear and non-stationary signals without a prior function. It can be applied in many applications such as feature extraction, image compression, and image filtering. Although modified BEMDs are proposed in several approaches, computational cost and quality of their bi-dimensional intrinsic mode function (BIMF) still require an improvement. In this paper, an iteration-free computation method for bi-dimensional empirical mode decomposition, called iBEMD, is proposed. The locally partial correlation for principal component analysis (LPC-PCA) is a novel technique to extract BIMFs from an original signal without using extrema detection. This dramatically reduces the computation time. The LPC-PCA technique also enhances the quality of BIMFs by reducing artifacts. The experimental results, when compared with state-of-the-art methods, show that the proposed iBEMD method can achieve the faster computation of BIMF extraction and the higher quality of BIMF image. Furthermore, the iBEMD method can clearly remove an illumination component of nature scene images under illumination change, thereby improving the performance of text localization and recognition.