Timing fault detection techniques address the problems caused by increased variations on a chip, especially with dynamic voltage and frequency scaling (DVFS). The Razor flip-flop (FF) is a timing fault detection technique that employs double sampling by the main and shadow FFs. In order for the Razor FF to correctly detect a timing fault, not the main FF but the shadow FF must sample the correct value. The application of Razor FFs to static logic relaxes the timing constraints; however, the naive application of Razor FFs to dynamic precharged logic such as SRAM read circuits is not effective. This is because the SRAM precharge cannot start before the shadow FF samples the value; otherwise, the transition of the bitline of the SRAM stops and the value sampled by the shadow FF will be incorrect. Therefore, the detect period cannot overlap the precharge period. This paper proposes a novel application of Razor FFs to SRAM read circuits. Our proposal employs a conditional precharge according to the value of a bitline sampled by the main FF. This enables the detect period to overlap the precharge period, thereby relaxing the timing constraints. The additional circuit required by this method is simple and only needed around the sense amplifier, and there is no need for a clock delayed from the system clock. Consequently, the area overhead of the proposed circuit is negligible. This paper presents SPICE simulations of the proposed circuit. Our proposal reduces the minimum cycle time by 51.5% at a supply voltage of 1.1 V and the minimum voltage by 31.8% at cycle time of 412.5 ps.

In the present paper, we propose a broadcast ARQ protocol based on the concept of index coding. In the proposed scenario, a server wishes to transmit a finite sequence of packets to multiple receivers via a broadcast channel with packet erasures until all of the receivers successfully receive all of the packets. In the retransmission phase, the server produces a coded packet as a retransmitted packet based on the side-information sent from the receivers via feedback channels. A notable feature of the proposed protocol is that the decoding process at the receiver side has low decoding complexity because only a small number of addition operations are needed in order to recover an intended packet. This feature may be preferable for reducing the power consumption of receivers. The throughput performance of the proposed protocol is close to that of the ideal FEC throughput performance when the erasure probability is less than 0.1. This implies that the proposed protocol provides almost optimal throughput performance in such a regime.

The problem of radar constant-modulus (CM) waveform design for the detection of multiple targets is considered in this paper. The CM constraint is imposed from the perspective of hardware realization and full utilization of the transmitter's power. Two types of CM waveforms — the arbitrary-phase waveform and the quadrature phase shift keying waveform — are obtained by maximizing the minimum of the signal-to-clutter-plus-noise ratios of the various targets. Numerical results show that the designed CM waveforms perform satisfactorily, even when compared with their counterparts without constraints on the peak-to-average ratio.

An equivalent-circuit model is an effective tool for the analysis and design of metamaterials. This paper describes a systematic and theoretical method for the circuit modeling of meta-atoms. We focus on the structures of wired metallic spheres and propose a method for deriving a sophisticated equivalent circuit that has the same topology as the wires using the partial element equivalent circuit (PEEC) method. Our model contains the effect of external electromagnetic coupling: excitation by an external field modeled by voltage sources and radiation modeled by the radiation resistances for each mode. The equivalent-circuit model provides the characteristics of meta-atoms such as the resonant frequencies and the resonant modes induced by the current distribution in the wires by an external excitation. Although the model is obtained by a very coarse discretization, it provides a good agreement with an electromagnetic simulation.

In this paper, we present two classes of zero difference balanced (ZDB) functions, which are derived by difference balanced functions, and a class of perfect ternary sequences respectively. The proposed functions have parameters not covered in the literature, and can be used to design optimal constant composition codes, and perfect difference systems of sets.

We proposed to apply compressed sensing to realize information sharing of link quality for wireless mesh networks (WMNs) with grid topology. In this paper, we extend the link quality sharing method to be applied for WMNs with arbitrary topology. For arbitrary topology WMNs, we introduce a link quality matrix and a matrix formula for compressed sensing. By employing a diffusion wavelets basis, the link quality matrix is converted to its sparse equivalent. Based on the sparse matrix, information sharing is achieved by compressed sensing. In addition, we propose compressed transmission for arbitrary topology WMNs, in which only the compressed link quality information is transmitted. Experiments and simulations clarify that the proposed methods can reduce the amount of data transmitted for information sharing and maintain the quality of the shared information.

Much attention has recently been paid to sparsity-aware space-time adaptive processing (STAP) algorithms. The idea of sparsity-aware technology is commonly based on the convex l1-norm penalty. However, some works investigate the lq (0 < q < 1) penalty which induces more sparsity owing to its lack of convexity. We herein consider the design of an lq penalized STAP processor with a generalized sidelobe canceler (GSC) architecture. The lq cyclic descent (CD) algorithm is utilized with the least squares (LS) design criterion. It is validated through simulations that the lq penalized STAP processor outperforms the existing l1-based counterparts in both convergence speed and steady-state performance.

Event-triggered control is a control method that the measured signal is sent to the controller only when a certain triggering condition on the measured signal is satisfied. In this paper, we propose a linear quadratic regulator (LQR) with decentralized triggering conditions. First, a suboptimal solution to the design problem of LQRs with decentralized triggering conditions is derived. A state-feedback gain can be obtained by solving a convex optimization problem with LMI (linear matrix inequality) constraints. Next, the relation between centralized and decentralized triggering conditions is discussed. It is shown that control performance of an LQR with decentralized event-triggering is better than that with centralized event-triggering. Finally, a numerical example is illustrated.

The multiple assignment scheme is to assign one or more shares to single participant so that any kind of access structure can be realized by classical secret sharing schemes. We propose its quantum version including ramp secret sharing schemes. Then we propose an integer optimization approach to minimize the average share size.

Periodic interference frequently affects the measurement of small signals and causes problems in clinical diagnostics. Adaptive filters can be used as potential tools for cancelling such interference. However, when the interference has a frequency fluctuation, the ideal adaptive-filter coefficients for cancelling the interference also fluctuate. When the adaptation property of the algorithm is slow compared with the frequency fluctuation, the interference-cancelling performance is degraded. However, if the adaptation is too quick, the performance is degraded owing to the target signal. To overcome this problem, we propose an adaptive filter that suppresses the fluctuation of the ideal coefficients by utilizing a $rac{pi}{2}$ phase-delay device. This method assumes a frequency response that characterizes the transmission path from the interference source to the main input signal to be sufficiently smooth. In the numerical examples, the proposed method exhibits good performance in the presence of a frequency fluctuation when the forgetting factor is large. Moreover, we show that the proposed method reduces the calculation cost.

A statistical call admission control (CAC) allows more calls with on-off patterns to be accepted and a higher channel efficiency to be achieved. In this paper, we propose three statistical CACs for VoIP calls with silence suppression considering the priority of each VoIP call, where the call priority is determined by the call acceptance order in an IP-PBX. We analyse the packet loss rates in an IP-PBX under the proposed strategies and express the end-to-end QoS of a VoIP call as an R-factor in a VoIP service network. The performances of the proposed CACs are evaluated using the maximum allowable number of VoIP calls while satisfying the end-to-end QoS constraint, the average QoS of acceptable VoIP calls and the channel efficiency. The advantage of the proposed statistical CACs over the non-statistical CAC is verified in terms of these three performance metrics. The results indicate that a trade-off is possible in that the maximum allowable number of VoIP calls in an IP-PBX increases as the average QoS of acceptable VoIP calls is lowered according to the proposed statistical CAC used. Nevertheless, the results allow us to verify that the channel efficiencies are the same for all the statistical CACs considered.

Spectrum sharing effectively improves the spectrum usage by allowing secondary users (SUs) to dynamically and opportunistically share the licensed bands with primary users (PUs). The concept of cooperative spectrum sharing allows SUs to use portions of the PUs' radio resource for their own data transmission, under the condition that SUs help the PUs' transmission. The key issue with designing such a scheme is how to deal with the resource splitting of the network. In this paper we propose a relay-based cooperative spectrum sharing scheme in which the network consists of one PU and multiple SUs. The PU asks the SUs to relay its data in order to improve its energy efficiency, in return it rewards the SUs with a portion of its authorized spectrum. However each SU is only allowed to transmit its data via the rewarded channel at a power level proportional to the contribution it makes to the PU. Since energy cost is considered, the SUs must carefully determine their power level. This scheme forms a non-cooperative Stackelberg resource allocation game where the strategy of PU is the bandwidth it rewards and the strategy of each SU is power level of relay transmission. We first investigate the second stage of the sub-game which is addressed as power allocation game. We prove there exists an equilibrium in the power allocation game and provide a sufficient condition for the uniqueness of the equilibrium. We further prove a unique Stackelberg equilibrium exists in the resource allocation game. Distributed algorithms are proposed to help the users with incomplete information achieve the equilibrium point. Simulation results validate our analysis and show that our proposed scheme introduces significant utility improvement for both PU and SUs.

This paper reports dual-polarization In-phase and Quadrature (DP-IQ) modulators and photodetectors integrated with the 90° hybrid using InP-based monolithic integration technologies for 100/200Gb/s coherent transmission. The DP-IQ modulator was monolithically integrated with the Mach-Zehnder modulator array consisting of deep-ridge waveguides formed through dry etching and benzocyclobutene planarization processes. This DP-IQ modulator exhibited the low half-wavelength voltage (Vπ=1.5V) and the wide 3-dB bandwidth (f3dB > 28GHz). The photodetector monolithically integrated with the 90° hybrid consisting of multimode interference structures was realized by the butt-joint regrowth. A responsivity including total loss of 7.9dB in the waveguide was as high as 0.155A/W at a wavelength of 1550nm, and responsivity imbalance of the In-phase and Quadrature channels was less than ±0.5dB over the C-band. In addition, the low dark current (less than 500pA up to 85°C @ -3.0V) and the stable operation in the accelerated aging test (test condition: -5V at 175°C) over 5,000h were successfully achieved for the p-i-n-photodiode array with a buried heterostructure formed through the selective embedding regrowth. Finally, a receiver responsivity including intrinsic loss of 3dB in the polarization beam splitter was higher than 0.070A/W at a wavelength of 1550nm through the integration of the spot-size converter, and demodulation of 128Gb/s DP-QPSK and 224Gb/s DP-16QAM modulated signals was demonstrated for the compact coherent receiver using this photodetector integrated with the 90° hybrid. Therefore, we indicated that these InP-based monolithically integrated photonic devices are very useful for 100/200Gb/s pluggable coherent transceivers.

We prepared a bR thin film by the wire-bar coating technique, and investigated the transient photo-current characteristics of the bR photocell. The transient photo-current signal of bR photocells prepared by the wire-bar coating technique and the dip coating technique was compared. An almost identical transient photo-current signal intensity was obtained both for the wire-bar coating technique and dip coating technique, while the thickness of bR thin film prepared by the wire-bar coating technique is slightly thinner than that prepared by the dip-coating technique. Transparent conductive oxide dependence of the transient photo-current signal is almost the same dependence for the bR photocells with a bR thin film prepared by both techniques. Application of the wire-bar coating technique is significant from the viewpoints of the bR's sample consumption as well as simplicity of sample preparation.

Compact and room-temperature operable terahertz emitting devices have been proposed using a semiconductor coupled multilayer cavity that consists of two functional cavity layers and three distributed Bragg reflector (DBR) multilayers. Two cavity modes with an optical frequency difference in the terahertz region are realized since two cavities are coupled by the intermediate DBR multilayer. In the proposed device, one cavity is used as the active layer for two-color lasing in the near-infrared region by current injection and the other is used as the second-order nonlinear optical medium for difference-frequency generation of the two-color fundamental laser light. The control of the nonlinear polarization by face-to-face bonding of two epitaxial wafers with different orientations is quite effective to achieve bright terahertz emission from the coupled cavity. In this study, two-color emission by optical excitation was measured for the wafer-bonded GaAs/AlGaAs coupled multilayer cavity containing self-assembled InAs quantum dots (QDs). We found that optical loss at the bonding interface strongly affects the two-color emission characteristics when the bonding was performed in the middle of the intermediate DBR multilayer. The effect was almost eliminated when the bonding position was carefully chosen by considering electric field distributions of the two modes. We also fabricated the current-injection type devices using the wafer-bonded coupled multilayer cavities. An assemble of self-assembled QDs is considered to be desirable as the optical gain medium because of the discrete nature of the electronic states and the relatively wide gain spectrum due to the inhomogeneous size distribution. The gain was, however, insufficient for two-color lasing even when the nine QD layers were used. Substituting two types of InGaAs multiple quantum wells (MQWs) for the QDs, we were able to demonstrate two-color lasing of the device when the gain peaks of MQWs were tuned to the cavity modes by lowering the operating temperature.

We present a novel receiver for reliable IoT communications. In this letter, it is assumed that IoT communications are based on ZigBee under frequency-selective indoor environments. The ZigBee includes IEEE 802.15.4 specification for low-power and low-cost communications. The presented receiver fully follows the specification. However, the specification exhibits extremely low performance under frequency-selective environments. Therefore, a channel estimation approach is proposed for reliable communications under frequency-selective fading indoor environments. The estimation method relies on FFT operations, which are usually embedded in cellular phones. We also suggest a correlation method for accurate recovery of original information. The simulation results show that the proposed receiver is very suitable for IoT communications under frequency-selective indoor environments.

HTTP Adaptive Streaming (HAS) has become a popular solution for multimedia delivery nowadays. Because of throughput variations, video quality fluctuates during a streaming session. Therefore, a main challenge in HAS is how to evaluate the overall video quality of a session. In this paper, we explore the impacts of quality values and quality variations in HAS. We propose to use the histogram of segment quality values and the histogram of quality gradients in a session to model the overall video quality. Subjective test results show that the proposed model has very high prediction performance for different videos. Especially, the proposed model provides insights into the influence factors of the overall quality, thus leading to suggestions to improve the quality of streaming video.

This paper studies H∞ control for networked control systems with packet loss. In networked control systems, packet loss is one of major weakness because the control performance deteriorates due to packet loss. H∞ control, which is one of robust control, can design a controller to reduce the influence of disturbances acting on the controlled object. This paper proposes an H∞ control design that considers packet loss as a disturbance. Numerical examples show that the proposed H∞ control design can more effectively reduce control performance deterioration due to packet loss than the conventional H∞ control design. In addition, this paper provides control performance comparisons of H∞ control and Linear Quadratic (LQ) control. Numerical examples show that the control performance of the proposed H∞ control design is better than that of the LQ control design.

An uncorrelated asymmetric ZCZ (UA-ZCZ) sequence set is a special version of an asymmetric ZCZ (A-ZCZ) sequence set, which contains multiple subsets and each subset is a typical ZCZ sequence set. One of the most important properties of UA-ZCZ sequnence set is that two arbitrary sequences from different sequence subsets are uncorrelated sequences, whose cross-correlation function (CCF) is zeros at all shifts. Based on interleaved technique and an uncorrelated sequence set, a new UA-ZCZ sequence set is obtained via interleaving a perfect sequence. The uncorrelated property of the UA-ZCZ sequence sets is expected to be useful for avoiding inter-cell interference of QS-CDMA systems.

This paper proposed that a path loss model for outdoor-to-indoor corridor is presented to construct next generation mobile communication systems. The proposed model covers the frequency range of millimeter wave bands up to 40GHz and provides three dimensional incident angle characteristics. Analysis of path loss characteristics is conducted by ray tracing. We clarify that the paths reflected multiple times between the external walls of buildings and then diffracted into one of the buildings are dominant. Moreover, we also clarify how the paths affect the path loss dependence on frequency and three dimensional incident angle. Therefore, by taking these dependencies into consideration, the proposed model decreases the root mean square errors of prediction results to within about 2 to 6dB in bands up to 40GHz.