This letter solves the energy efficiency optimization problem for the simultaneous wireless information and power transfer (SWIPT) systems with non-orthogonal multiple access (NOMA), multiple input single output (MISO) and power-splitting structures, where each user may have different individual quality of service (QoS) requirements about information and energy. Nonlinear energy harvesting model is used. Alternate optimization approach is adopted to find the solution, which shows a fast convergence behavior. Simulation results show the proposed scheme has higher energy efficiency than existing dual-layer iteration and throughput maximization methods.

End-to-end loss and delay are both fundamental metrics in network performance evaluation, and accurate measurements for these end-to-end metrics are one of the keys to keeping delay/loss-sensitive applications (e.g., audio/video conferencing, IP telephony, or telesurgery) comfortable on networks. In our previous work [1], we proposed a parallel flow monitoring method that can provide accurate active measurements of end-to-end delay. In this method, delay samples of a target flow increase by utilizing the observation results of other flows sharing the source/destination with the target flow. In this paper, to improve accuracy of loss measurements, we propose a loss measurement method by extending our delay measurement method. Additionally, we improve the loss measurement method so that it enables to fully utilize information of all flows including flows with different source and destination. We evaluate the proposed method through theoretical and simulation analyses. The evaluations show that the accuracy of the proposed method is bounded by theoretical upper/lower bounds, and it is confirmed that it reduces the error of loss rate estimations by 57.5% on average.

Machine-to-Machine (M2M) communication plays a pivotal role in the evolution of Internet of Things (IoT). Cellular networks are considered to be a key enabler for M2M communications, which are originally designed mainly for Human-to-Human (H2H) communications. The introduction of M2M users will cause a series of problems to traditional H2H users, i.e., interference between various traffic. Resource allocation is an effective solution to these problems. In this paper, we consider a shared resource block (RB) and power allocation in an H2H/M2M coexistence scenario, where M2M users are subdivided into delay-tolerant and delay-sensitive types. We first model the RB-power allocation problem as maximization of capacity under Quality-of-Service (QoS) constraints of different types of traffic. Then, a learning framework is introduced, wherein a complex agent is built from simpler subagents, which provides the basis for distributed deployment scheme. Further, we proposed distributed Q-learning based autonomous RB-power allocation algorithm (DQ-ARPA), which enables the machine type network gateways (MTCG) as agents to learn the wireless environment and choose the RB-power autonomously to maximize M2M pairs' capacity while ensuring the QoS requirements of critical services. Simulation results indicates that with an appropriate reward design, our proposed scheme succeeds in reducing the impact of delay-tolerant machine type users on critical services in terms of SINR thresholds and outage ratios.

Computer networks tend to be subjected to the proliferation of mobile demands, therefore it poses a great challenge to guarantee the quality of network service. For real-time systems, the QoS performance bound analysis for the complex network topology and background traffic in modern networks is often difficult. Network calculus, nevertheless, converts a complex non-linear network system into an analyzable linear system to accomplish more accurate delay bound analysis. The existing network environment contains complex network resource allocation schemes, and delay bound analysis is generally pessimistic, hence it is essential to modify the analysis model to improve the bound accuracy. In this paper, the main research approach is to obtain the measurement results of an actual network by building a measurement environment and the corresponding theoretical results by network calculus. A comparison between measurement data and theoretical results is made for the purpose of clarifying the scheme of bandwidth scheduling. The measurement results and theoretical analysis results are verified and corrected, in order to propose an accurate per-flow end-to-end delay bound analytic model for a large-scale scheduling network. On this basis, the instructional significance of the analysis results for the engineering construction is discussed.

Through the concept of network slicing, a single physical network infrastructure can be split into multiple logically-independent Network Slices (NS), each of which is customized for the needs of its respective individual user or industrial vertical. In the beyond 5G (B5G) system, this customization can be done for many targeted services, including, but not limited to, 5G use cases and beyond 5G. The network slices should be optimized and customized to stitch a suitable environment for targeted industrial services and verticals. This paper proposes a novel Quality of Service (QoS) framework that optimizes and customizes the network slices to ensure the service level agreement (SLA) in terms of end-to-end reliability, delay, and bandwidth communication. The proposed framework makes use of network softwarization technologies, including software-defined networking (SDN) and network function virtualization (NFV), to preserve the SLA and ensure elasticity in managing the NS. This paper also mathematically models the end-to-end network by considering three parts: radio access network (RAN), transport network (TN), and core network (CN). The network is modeled in an abstract manner based on these three parts. Finally, we develop a prototype system to implement these algorithms using the open network operating system (ONOS) as a SDN controller. Simulations are conducted using the Mininet simulator. The results show that our QoS framework and the proposed resource allocation algorithms can effectively schedule network resources for various NS types and provide reliable E2E QoS services to end-users.

This paper studies using price incentives to shift bandwidth demand from peak to non-peak periods. In particular, cost discounts decrease as peak monthly usage increases. We take into account the delay sensitivity of different apps: during peak hours, the usage of hard real-time applications (HRAS) is not counted in the user's monthly data cap, while the usage of other applications (OAS) is counted in the user's monthly data cap. As a result, users may voluntarily delay or abandon OAS in order to get a higher fee discount. Then, a new data rate control algorithm is proposed. The algorithm allocates the data rate according to the priority of the source, which is determined by two factors: (I) the allocated data rate; and (II) the waiting time.

In this paper, we propose a hierarchical Stackelberg game based resource allocation algorithm (HGRAA) to jointly allocate the wireless and computational resources of a mobile edge computing (MEC) system. The proposed HGRAA is composed of two levels: the lower-level evolutionary game (LEG) minimizes the cost of mobile terminals (MTs), and the upper-level exact potential game (UEPG) maximizes the utility of MEC servers. At the lower-level, the MTs are divided into delay-sensitive MTs (DSMTs) and non-delay-sensitive MTs (NDSMTs) according to their different quality of service (QoS) requirements. The competition among DSMTs and NDSMTs in different service areas to share the limited available wireless and computational resources is formulated as a dynamic evolutionary game. The dynamic replicator is applied to obtain the evolutionary equilibrium so as to minimize the costs imposed on MTs. At the upper level, the exact potential game is formulated to solve the resource sharing problem among MEC servers and the resource sharing problem is transferred to nonlinear complementarity. The existence of Nash equilibrium (NE) is proved and is obtained through the Karush-Kuhn-Tucker (KKT) condition. Simulations illustrate that substantial performance improvements such as average utility and the resource utilization of MEC servers can be achieved by applying the proposed HGRAA. Moreover, the cost of MTs is significantly lower than other existing algorithms with the increasing size of input data, and the QoS requirements of different kinds of MTs are well guaranteed in terms of average delay and transmission data rate.

The spread of the Internet of Things (IoT) has led to the generation of large amounts of data, requiring massive communication, computing, and storage resources. Cloud computing plays an important role in realizing most IoT applications classified as massive machine type communication and cyber-physical control applications in vertical domains. To handle the increasing amount of IoT data, it is important to reduce the traffic concentrated in the cloud by distributing the computing and storage resources to the network edge side and to suppress the latency of the IoT applications. In this paper, we first present a recent literature review on fog/edge computing and data aggregation as representative traffic reduction technologies for efficiently utilizing communication, computing, and storage resources in IoT systems, and then focus on data aggregation control minimizing the latency in an IoT gateway. We then present a unified modeling for statistical and nonstatistical data aggregation and analyze its latency. We analytically derive the Laplace-Stieltjes transform and average of the stationary distribution of the latency and approximate the average latency; we subsequently apply it to an adaptive aggregation number control for the time-variant data arrival. The transient traffic characteristics, that is, the absorption of traffic fluctuations realizing a stable optimal latency, were clarified through a simulation with a time-variant Poisson input and non-Poisson inputs, such as a Beta input, which is a typical IoT traffic model.

With the spread of the broadband Internet and high-performance devices, various services have become available anytime, anywhere. As a result, attention is focused on the service quality and Quality of Experience (QoE) is emphasized as an evaluation index from the user's viewpoint. Since QoE is a subjective evaluation metric and deeply involved with user perception and expectation, quantitative and comparative research was difficult because the QoE study is still in its infancy. At present, after tremendous devoted efforts have contributed to this research area, a shape of the QoE management architecture has become clear. Moreover, not only for research but also for business, video streaming services are expected as a promising Internet service incorporating QoE. This paper reviews the present state of QoE studies with the above background and describes the future prospect of QoE. Firstly, the historical aspects of QoE is reviewed starting with QoS (Quality of Service). Secondly, a QoE management architecture is proposed in this paper, which consists of QoE measurement, QoE assessment, QoS-QoE mapping, QoE modeling, and QoE adaptation. Thirdly, QoE studies related with video streaming services are introduced, and finally individual QoE and physiology-based QoE measurement methodologies are explained as future prospect in the field of QoE studies.

Low Earth Orbit (LEO) satellite networks serve as a powerful complement to the terrestrial networks because of their ability to provide global coverage. In LEO satellite networks, the network is prone to congestion due to several reasons. First, the terrestrial gateways are usually located within a limited region leading to congestion of the nodes near the gateways. Second, routing algorithms that merely adopt shortest paths fail to distribute the traffic uniformly in the network. Finally, the traffic input may exceed the network capacity. Therefore, rate control and load-balancing routing are needed to alleviate network congestion. Moreover, different kinds of traffic have different Quality of Service (QoS) requirements which need to be treated appropriately. In this paper, we investigate joint rate control and load-balancing routing in LEO satellite networks to tackle the problem of network congestion while considering the QoS requirements of different traffic. The joint rate control and routing problem is formulated with the throughput and end-to-end delay requirements of the traffic taken into consideration. Two routing schemes are considered which differ in whether or not different traffic classes can be assigned different paths. For each routing scheme, the joint rate control and routing problem is formulated. A heuristic algorithm based on simulated annealing is proposed to solve the problems. Besides, a snapshot division method is proposed to increase the connectivity of the network and reduce the number of snapshots by merging the links between satellites and gateways. The simulation results show that compared with methods that perform routing and rate control separately, the proposed algorithm improves the overall throughput of the network and provides better QoS guarantees for different traffic classes.

Road traffic collisions are an extremely serious and often fatal issue. One promising approach to mitigate such collisions is the use of connected car services that share road traffic information obtained from vehicles and cameras over mobile networks. In connected car services, it is important for data chunks to arrive at a destination node within a certain deadline constraint. In this paper, we define a flow from a vehicle (or camera) to the same vehicle (or camera) via an MEC server, as a mission critical (MC) flow, and call a deadline of the MC flow the MC deadline. Our research objective is to achieve a higher arrival ratio within the MC deadline for the MC flow that passes through both the radio uplink and downlink. We previously developed a deadline-aware scheduler with consideration for quality fluctuation (DAS-QF) that considers chunk size and a certain deadline constraint in addition to radio quality and utilizes these to prioritize users such that the deadline constraints are met. However, this DAS-QF does not consider that the congestion levels of evolved NodeB (eNB) differ depending on the eNB location, or that the uplink congestion level differs from the downlink congestion level in the same eNB. Therefore, in the DAS-QF, some data chunks of a MC flow are discarded in the eNB when they exceed either the uplink or downlink deadline in congestion, even if they do not exceed the MC deadline. In this paper, to reduce the eNB packet drop probability due to exceeding either the uplink and downlink deadline, we propose a deadline coordination function (DCF) that adaptively sets each of the uplink and downlink deadlines for the MC flow according to the congestion level of each link. Simulation results show that the DAS-QF with DCF offers higher arrival ratios within the MC deadline compared to DAS-QF on its own

Simultaneous multithreading (SMT) technology improves CPU throughput, but also causes unpredictable performance fluctuations for co-running workloads. Although recent major SMT processors have adopted some techniques to promote hardware support for quality-of-service (QoS), achieving both precise performance guarantees and high throughput on SMT architectures is still a challenging open problem. In this paper, we demonstrate through some comprehensive investigations on a cycle-accurate simulator that not only almost all in-core resources suffer from severe contention as workloads vary but also there is a non-linear relationship between performance and available quotas of resources. We consider these observations as the fundamental reason leading to the challenging problem above. Thus, we introduce QoSMT, a novel hardware scheme that leverages a closed-loop controlling mechanism consisting of detection, prediction and adjustment to enforce precise performance guarantees for specific targets, e.g. achieving 85%, 90% or 95% of the performance of a workload running alone respectively. We implement a prototype on GEM5 simulator. Experimental results show that the average control error is only 1.4%, 0.5% and 3.6%.

Constrained by quality-of-service (QoS), a robust transceiver design is proposed for multiple-input multiple-output (MIMO) interference channels with imperfect channel state information (CSI) under bounded error model. The QoS measurement is represented as the signal-to-interference-plus-noise ratio (SINR) for each user with single data stream. The problem is formulated as sum power minimization to reduce the total power consumption for energy efficiency. In a centralized manner, alternating optimization is performed at each node. For fixed transmitters, closed-form expression for the receive beamforming vectors is deduced. And for fixed receivers, the sum-power minimization problem is recast as a semi-definite program form with linear matrix inequalities constraints. Simulation results demonstrate the convergence and robustness of the proposed algorithm, which is important for practical applications in future wireless networks.

In this study, under the assumption that a robot (1) has a remotely controllable yawing camera and (2) moves in a uniform linear motion, we propose and investigate how to improve the target recognition rate with the camera, by using wireless feedback loop control. We derive the allowable data rate theoretically, and, from the viewpoint of error and delay control, we propose and evaluate QoS-Hybrid ARQ schemes under data rate constraints. Specifically, the theoretical analyses derive the maximum data rate for sensing and control based on the channel capacity is derived with the Shannon-Hartley theorem and the path-loss channel model inside the human body, i.e. CM2 in IEEE 802.15.6 standard. Then, the adaptive error and delay control schemes, i.e. QoS-HARQ, are proposed considering the two constraints: the maximum data rate and the velocity of the camera's movement. For the performance evaluations, with the 3D robot simulator GAZEBO, we evaluated our proposed schemes in the two scenarios: the static environment and the dynamic environment. The results yield insights into how to improve the recognition rate considerably in each situation.

In this paper, we propose a method for automatic virtual resource allocation by using a multi-target classification-based scheme (MTCAS). In our method, an Infrastructure Provider (InP) bundles its CPU, memory, storage, and bandwidth resources as Network Elements (NEs) and categorizes them into several types in accordance to their function, capabilities, location, energy consumption, price, etc. MTCAS is used by the InP to optimally allocate a set of NEs to a Virtual Network Operator (VNO). Such NEs will be subject to some constraints, such as the avoidance of resource over-allocation and the satisfaction of multiple Quality of Service (QoS) metrics. In order to achieve a comparable or higher prediction accuracy by using less training time than the available ensemble-based multi-target classification (MTC) algorithms, we propose a majority-voting based ensemble algorithm (MVEN) for MTCAS. We numerically evaluate the performance of MTCAS by using the MVEN and available MTC algorithms with synthetic training datasets. The results indicate that the MVEN algorithm requires 70% less training time but achieves the same accuracy as the related ensemble based MTC algorithms. The results also demonstrate that increasing the amount of training data increases the efficacy ofMTCAS, thus reducing CPU and memory allocation by about 33% and 51%, respectively.

The ability of Software Defined Networking (SDN) to dynamically adjust the network behaviour and to support fine-grained routing policies becomes increasingly attractive beyond the boundaries of Data Centre domains, where SDN has already gained enormous momentum. However, the wider adoption of SDN in ISP (Internet Service Provider) networks is still uncertain due to concerns about the scalability of a centralized traffic management in large-scale environments. This is particularly problematic when ISP offers virtual-link services, which imply a performance guaranteed data transfer between two network points. Our solution is a new approach to virtual-link mapping in SDN-based ISP networks. Within the problem's scope, we address traffic engineering (TE), QoS provisioning and failure recovery issues. In order to decrease the controller load, computational effort, and processing delay, we introduce a function split between online routing and TE. The TE functions are performed periodically, with configurable periodicity. In order to reduce the control overhead, we restrict the traffic optimization problem to load balancing over multiple static tunnels. This allows retention of the traditional MPLS routers in the network core and to achieve fast virtual-link restoration in case of physical-link failures. The online routing and admission control algorithms have been designed with the goal of low complexity, and to minimize Flow-table updates. In our simulation study, we compare the proposed virtual-link mapping solution with the solutions that exploit routing flexibility in fully SDN-enabled networks. We find that the throughput loss due to the use of static traffic tunnels is relatively small, while the control overhead is reduced significantly. A prototype of the proposed SDN control-plane is developed and validated in the Mininet emulator.

To improve the efficiency of spectrum utilization, cognitive radio systems attempt to use temporarily unoccupied spectrum which is referred to as a spectrum hole. To this end, QoS (Quality of Service) is one of the most important issues in practical cognitive radio systems. In this article, an efficient spectrum management scheme using self-reserving spectrum is proposed to support QoS for cognitive radio users. The self-reservation of a spectrum hole can minimize service dropping probability by using the statistical characteristics of spectrum bands while using optimum amount of resources. In addition, it realizes seamless service for users by eliminating spectrum entry procedure that includes spectrum sensing, spectrum request, and spectrum grant. Performance analysis and intensive system level simulations confirm the efficiency of the proposed algorithms.

Bandwidth reservation is an important way to guarantee deterministic end-to-end service quality. However, with the traditional bandwidth reservation mechanism, the allocated bandwidth at each link is by default the same without considering the available resource of each link, which may lead to unbalanced resource utilization and limit the number of user connections that network can accommodate. In this paper, we propose a non-uniform bandwidth reservation method, which can further balance the resource utilization of network by optimizing the reserved bandwidth at each link according to its link load. Furthermore, to implement the proposed method, we devise a flexible and automatic bandwidth reservation mechanism based on meter table of Openflow. Through simulations, it is showed that our method can achieve better load balancing performance and make network accommodate more user connections comparing with the traditional methods in most application scenarios.

The widespread application of mobile electronic devices has triggered a boom in energy consumption, especially in user equipment (UE). In this paper, we investigate the energy-efficiency (EE) of a UE experiencing the worst channel conditions, which is termed worst-EE. Due to the limited battery of the mobile equipment, worst-EE is a suitable metric for EE fairness optimization in the uplink transmissions of orthogonal frequency division multiple access (OFDMA) networks. More specifically, we determine the optimal power and sub-carrier allocation to maximize the worst-EE with respect to UEs' transmit power, sub-carriers and statistical quality-of-service (QoS). In order to maximize the worst-EE, we formulate a max-min power and sub-carrier allocation problem, which involves nonconvex fractional mixed integer nonlinear programming, i.e., NP-hard to solve. To solve the problem, we first relax the allocation of sub-carriers, formulate the upper bound problem on the original one and prove the quasi-concave property of objective function. With the aid of the Powell-Hestenes-Rockfellar (PHR) approach, we propose a fairness EE sub-carrier and power allocation algorithm. Finally, simulation results demonstrate the advantages of the proposed algorithm.

The recent switch from analog to digital TV broadcasting around the world has led to the development of communications standards that consider the use of TV White Spaces (TVWS). One such standard is the IEEE 802.22 wireless regional area network (WRAN), which considers the use of TVWS to provide broadband wireless services over long transmission links, and therefore presents an opportunity to bring connectivity and data-based services from urban to rural areas. Services that could greatly benefit from the deployment of wireless broadband data links between urban and rural areas are those related to telemedicine and m-health. To enable proper telemedicine service delivery from urban (e.g. an urban hospital) to rural locations (e.g. a rural clinic) it is of paramount importance to provide a certain quality of service (QoS) level. In this context, QoS provisioning for telemedicine applications over wireless networks presents a major challenge that must be addressed to fulfill the potential that rural wireless telemedicine has to offer. In this paper, a cross-layer approach combining medium access control (MAC) and application (APP) layers is proposed with the aim of reducing blocking probability in teleconsulting services operating over IEEE802.22/WRANs. At the APP layer, a teleconsulting traffic profile based on utilization rates is defined. On the other hand, at the MAC layer, an Adaptive Bandwidth Management (ABM) mechanism is used to perform a QoS-based classification of teleconsulting services and then dynamically allocate the bandwidth requirements. Three teleconsulting services with different bandwidth requirements are considered in order to evaluate the performance of the proposed approach: high-resolution teleconsulting, medium-resolution teleconsulting, and audio-only teleconsulting. Simulation results demonstrate that the proposed approach is able to reduce blocking probability by using different criteria for service modes within the admission control scheme.