We construct the first fully homomorphic encryption (FHE) scheme that encrypts matrices and supports homomorphic matrix addition and multiplication. This is a natural extension of packed FHE and thus supports more complicated homomorphic operations. We optimize the bootstrapping procedure of Alperin-Sheriff and Peikert (CRYPTO 2014) by applying our scheme. Our optimization decreases the lattice approximation factor from Õ(n3) to Õ(n2.5). By taking a lattice dimension as a larger polynomial in a security parameter, we can also obtain the same approximation factor as the best known one of standard lattice-based public-key encryption without successive dimension-modulus reduction, which was essential for achieving the best factor in prior works on bootstrapping of standard lattice-based FHE.

Based upon the Kerckhoffs' principle, illegal users can get to know the embedding and detection algorithms except for a secret key. Then, it is possible to access to a host signal which may be selected from frequency components of a digital content for embedding watermark signal. Especially for a fingerprinting scheme which embeds user's information as a watermark, the selected components can be easily found by the observation of differently watermarked copies of a same content. In this scenario, it is reported that some non-linear collusion attacks will be able to remove/modify the embedded signal. In this paper, we study the security analysis of our previously proposed spread-spectrum (SS) fingerprinting scheme[1], [2] under the Kerckhoffs' principle, and reveal its drawback when an SS sequence is embedded in a color image. If non-linear collusion attacks are performed only to the components selected for embedding, the traceability is greatly degraded while the pirated copy keeps high quality after the attacks. We also propose a simple countermeasure to enhance the robustness against non-linear collusion attacks as well as possible signal processing attacks for the underlying watermarking method.

Ultra-wideband radar exhibits high range resolution, and excellent capability for penetrating dielectric media, especially when using lower frequency microwaves. Thus, it has a great potential for innovative non-destructive testing of aging roads or bridges or for non-invasive medical imaging applications. In this context, we have already proposed an accurate dielectric constant estimation method for a homogeneous dielectric medium, based on a geometrical optics (GO) approximation, where the dielectric boundary points and their normal vectors are directly reproduced using the range point migration (RPM) method. In addition, to compensate for the estimation error incurred by the GO approximation, a waveform compensation scheme employing the finite-difference time domain (FDTD) method was incorporated. This paper shows the experimental validation of this method, where a new approach for suppressing the creeping wave along the dielectric boundary is also introduced. The results from real observation data validate the effectiveness of the proposed method in terms of highly accurate dielectric constant estimation and embedded object boundary reconstruction.

This paper proposes a method of watermarking for digital audio signals based on adaptive phase modulation. Audio signals are usually non-stationary, i.e., their own characteristics are time-variant. The features for watermarking are usually not selected by combining the principle of variability, which affects the performance of the whole watermarking system. The proposed method embeds a watermark into an audio signal by adaptively modulating its phase with the watermark using IIR all-pass filters. The frequency location of the pole-zero of an IIR all-pass filter that characterizes the transfer function of the filter is adapted on the basis of signal power distribution on sub-bands in a magnitude spectrum domain. The pole-zero locations are adapted so that the phase modulation produces slight distortion in watermarked signals to achieve the best sound quality. The experimental results show that the proposed method could embed inaudible watermarks into various kinds of audio signals and correctly detect watermarks without the aid of original signals. A reasonable trade-off between inaudibility and robustness could be obtained by balancing the phase modulation scheme. The proposed method can embed a watermark into audio signals up to 100 bits per second with 99% accuracy and 6 bits per second with 94.3% accuracy in the cases of no attack and attacks, respectively.

Incoming GPS signals through windows can be often observed indoors. However, conventional indoor positioning systems do not use Global Positioning System (GPS) generally because the signals may come in NLOS (Non Line of Sight). In this paper, we propose a positioning method by fingerprinting based on the incoming GPS signals.

A 12×16-element corporate-feed slot array is presented. The corporate-feed circuit for the 12×16-elemtent array consists of cross-junctions and asymmetric T-junctions, whereas the conventional one is limited to arrays of 2m×2n slots by its use of symmetric T-junctions. Simulations of the 12×16-element array show a 7.6% bandwidth for reflection less than -14dB. A 31.7-dBi gain with an antenna efficiency of 82.6% is obtained at the design frequency of 61.5GHz. The 12×16-element array is fabricated by diffusion bonding of laminated thin metal plates. Measurements indicate 31.1-dBi gain with 71.9% antenna efficiency at 61.5GHz.

Recognition of second language (L2) speech is still a challenging task even for state-of-the-art automatic speech recognition (ASR) systems, partly because pronunciation by L2 speakers is usually significantly influenced by the mother tongue of the speakers. The authors previously proposed using a reduced phoneme set (RPS) instead of the canonical one of L2 when the mother tongue of speakers is known, and demonstrated that this reduced phoneme set improved the recognition performance through experiments using English utterances spoken by Japanese. However, the proficiency of L2 speakers varies widely, as does the influence of the mother tongue on their pronunciation. As a result, the effect of the reduced phoneme set is different depending on the speakers' proficiency in L2. In this paper, the authors examine the relation between proficiency of speakers and a reduced phoneme set customized for them. The experimental results are then used as the basis of a novel speech recognition method using a lexicon in which the pronunciation of each lexical item is represented by multiple reduced phoneme sets, and the implementation of a language model most suitable for that lexicon is described. Experimental results demonstrate the high validity of the proposed method.

Conventional localization techniques such as triangulation and multilateration are not reliable in non-line-of-sight (NLOS) environments such as dense urban areas. Although fingerprint-based localization techniques have been proposed to solve this problem, we may face difficulties because we do not know the parameters of the illegal radio when creating the fingerprint database. This paper proposes a novel technique to localize illegal radios in an urban environment by interpolating the channel impulse responses stored as fingerprints in a database. The proposed interpolation technique consists of interpolation in the bandwidth (delay), frequency and spatial domains. A localization algorithm that minimizes the squared error criterion is employed in this paper, and the proposed technique is evaluated through Monte Carlo simulations using location fingerprints obtained from ray-tracing simulations. Results show that utilizing an interpolated fingerprint database is advantageous in such scenarios.

Address configuration is a key problem in data center networks. The core issue of automatic address configuration is assigning logical addresses to the physical network according to a blueprint, namely logical-to-device ID mapping, which can be formulated as a graph isomorphic problem and is hard. Recently years, some work has been proposed for this problem, such as DAC and ETAC. DAC adopts a sub-graph isomorphic algorithm. By leveraging the structure characteristic of data center network, DAC can finish the mapping process quickly when there is no malfunction. However, in the presence of any malfunctions, DAC need human effort to correct these malfunctions and thus is time-consuming. ETAC improves on DAC and can finish mapping even in the presence of malfunctions. However, ETAC also suffers from some robustness and efficiency problems. In this paper, we present GA-MAP, a data center networks address mapping algorithm based on genetic algorithm. By intelligently leveraging the structure characteristic of data center networks and the global search characteristic of genetic algorithm, GA-MAP can solve the address mapping problem quickly. Moreover, GA-MAP can even finish address mapping when physical network involved in malfunctions, making it more robust than ETAC. We evaluate GA-MAP via extensive simulation in several of aspects, including computation time, error-tolerance, convergence characteristic and the influence of population size. The simulation results demonstrate that GA-MAP is effective for data center addresses mapping.

In the routing design of interposer and etc., the combination of a pin pair to be connected by wire is often flexible, and the reductions of the total wire length and the length difference are pursued to keep the circuit performance. Even though the total wire length can be minimized by finding a minimum cost maximum flow in set pair routing problems, the length difference is often large, and the reduction of it is not easy. In this paper, an algorithm that reduces the length difference while keeping the total wire length small is proposed. In the proposed algorithm, an initial routing first obtained by a minimum cost maximum flow. Then it is modified to reduce the maximum length while keeping the minimum total wire length, and a connection of the minimum length is detoured to reduce the length difference. The effectiveness of the proposed algorithm is confirmed by experiments.

Microwave ultra-wideband (UWB) radar systems are advantageous for their high-range resolution and ability to penetrate dielectric objects. Internal imaging of dielectric objects by UWB radar is a promising nondestructive method of testing aging roads and bridges and a noninvasive technique for human body examination. For these applications, we have already developed an accurate internal imaging approach based on the range points migration (RPM) method, combined with a method that efficiently estimates the dielectric constant. Although this approach accurately extracts the internal boundary, it is applicable only to highly conductive targets immersed in homogeneous dielectric media. It is not suitable for multi-layered dielectric structures such as human tissues or concrete objects. To remedy this limitation, we here propose a novel dielectric constant and boundary extraction method for double-layered materials. This new approach, which simply extends the Envelope method to boundary extraction of the inner layer, is evaluated in finite difference time domain (FDTD)-based simulations and laboratory experiments, assuming a double-layered concrete cylinder. These tests demonstrate that our proposed method accurately and simultaneously estimates the dielectric constants of both media and the layer boundaries.

Microkernel operating systems (OSes) use zero-copy communication to reduce the overhead of copying transfer data, because the communication between OS servers occurs frequently in the case of microkernel OSes. However, when a memory management unit manages the translation lookaside buffer (TLB) using software, TLB misses tend to increase the overhead of interprocess communication (IPC) between OS servers running on a microkernel OS. Thus, improving the control method of a software-managed TLB is important for microkernel OSes. This paper proposes a fast control method of software-managed TLB that manages page attachment in the area used for IPC by using TLB entries, instead of page tables. Consequently, TLB misses can be avoided in the area, and the performance of IPC improves. Thus, taking the SH-4 processor as an example of a processor having a software-managed TLB, this paper describes the design and the implementation of the proposed method for AnT operating system, and reports the evaluation results of the proposed method.

The harmonious coloring of an undirected simple graph is a vertex coloring such that adjacent vertices are assigned different colors and each pair of colors appears together on at most one edge. The harmonious chromatic number of a graph is the least number of colors used in such a coloring. The harmonious chromatic number of a path is known, whereas the problem to find the harmonious chromatic number is NP-hard even for trees with pathwidth at most 2. Hence, we consider the harmonious coloring of trees with pathwidth 1, which are also known as caterpillars. This paper shows the harmonious chromatic number of a caterpillar with at most one vertex of degree more than 2. We also show the upper bound of the harmonious chromatic number of a 3-regular caterpillar.

Orthogonal frequency division multiplexing (OFDM) channel estimation is the key technique used in broadband wireless networks. The Doppler frequency caused by fast mobility environments will cause inter-carrier interference (ICI) and degrade the performance of OFDM systems. Due to the severe ICI, channel estimation becomes a difficult task in higher mobility scenarios. Our aim is to propose a pilot-aided channel estimation method that is robust to high Doppler frequency with low computational complexity and pilot overheads. In this paper, the time duration of each estimate covers multiple consecutive OFDM symbols, named a “window”. A close-form of polynomial channel modeling is derived. The proposed method is initialized to the least squares (LS) estimates of the channels corresponding to the time interval of the pilot symbols within the window. Then, the channel interpolation is performed in the entire window. The results of computer simulations and computation complexity evaluations show that the proposed technique is robust to high Doppler frequency with low computation complexity and low pilot overheads. Compared with the state-of-the-art method and some conventional methods, the new technique proposed here has much lower computational complexity while offering comparable performance.

A Bayer-like White-RGB (W-RGB) color filter array (CFA) was invented for overcoming the weaknesses of commonly used RGB based Bayer CFA. In order to reproduce full-color images from the Bayer-like W-RGB CFA, a demosaicing or a CFA interpolation process which estimates missing color channels of raw mosaiced images from CFA is an essential process for single sensor digital cameras having CFA. In the case of Bayer CFA, numerous demosaicing methods which have remarkable performance were already proposed. In order to take advantage of both remarkable performance of demosaicing method for Bayer CFA and the characteristic of high-sensitive Bayer-like W-RGB CFA, a new method of transforming Bayer-like W-RGB to Bayer pattern is required. Therefore, in this letter, we present a new method of transforming Bayer-like W-RGB pattern to Bayer pattern. The proposed method mainly uses the color difference assumption between different channels which can be applied to practical consumer digital cameras.

We have developed a capacitance sensor of frequency modulation for integrated touchpanels using amorphous In-Sn-Zn-O (α-ITZO) thin-film transistors (TFTs). This capacitance sensor consists of a ring oscillator, whose one stage is replaced by a reset transistor, sensing transistor, and sensing electrode. The sensing electrode is prepared as one terminal to form a sensing capacitor when the other terminal is added by a finger. The ring oscillator consists of pseudo CMOS inverters. We confirm that the oscillation frequency changes when the other terminal is added. This result suggests that this capacitance sensor can be applied to integrated touchpanels on flatpanel displays.

Template tracking has been extensively studied in Computer Vision with a wide range of applications. A general framework is to construct a parametric model to predict movement and to track the target. The difference in intensity between the pixels belonging to the current region and the pixels of the selected target allows a straightforward prediction of the region position in the current image. Traditional methods track the object based on the assumption that the relationship between the intensity difference and the region position is linear or non-linear. They will result in bad tracking performance when just one model is adopted. This paper proposes a method, called as Mixture Hyperplanes Approximation, which is based on finite mixture of generalized linear regression models to perform robust tracking. Moreover, a fast learning strategy is discussed, which improves the robustness against noise. Experiments demonstrate the performance and stability of Mixture Hyperplanes Approximation.

Two-track squeeze and adjacent track interference (ATI) are major barriers to increasing track density in hard disk drives (HDD). These depend on skew angles made by a magnetic head and circumferential direction on a magnetic disk. This paper describes relationships between the skew angle and the magnetic core width (MCW) which affects two-track squeeze and ATI performance. We propose a design concept of a track pitch profile at different skew angles considering MCW. Equivalent robustness of ATI performance on different skew angle conditions is obtained with the optimized track pitch.

To overcome the target-aspect sensitivity in radar high resolution range profile (HRRP) recognition, a novel method called Improved Kernel Distance Fuzzy C-means Clustering Method (IKDFCM) is proposed in this paper, which introduces kernel function into fuzzy c-means clustering and relaxes the constraint in the membership matrix. The new method finds the underlying geometric structure information hiding in HRRP target and uses it to overcome the HRRP target-aspect sensitivity. The relaxing of constraint in the membership matrix improves anti-noise performance and robustness of the algorithm. Finally, experiments on three kinds of ground HRRP target under different SNRs and four UCI datasets demonstrate the proposed method not only has better recognition accuracy but also more robust than the other three comparison methods.

This paper proposes a foreground segmentation method for indoor environments using depth images only. It uses a morphological operator and histogram analysis to segment the foreground. In order to compare the accuracy for foreground segmentation, we use metric measurements of false positive rate (FPR), false negative rate (FNR), total error (TE), and a similarity measure (S). A series of experimental results using video sequences collected under various circumstances are discussed. The proposed system is also designed in a field-programmable gate array (FPGA) implementation with low hardware resources.