A highly stable microwave exciter system has been developed for 87Sr+ ion microwave frequency standards. The controller was built to optimize the transfer function of the phase-locked loop. The upper limit of the frequency tracking error achieved was 7.7 10-15 at τ = 1 s. A phase frequency discriminator using an FPGA was also made and applied to a phase-locked loop. This paper reports on the design of and results obtained from the microwave exciter for Sr+ ion microwave frequency standards.
Wei DENG Kenichi OKADA Akira MATSUZAWA
This paper investigates a clock frequency generator for ultra-low-voltage sub-picosecond-jitter clock generation in future 0.5-V LSI and power aware LSI. To address the potential possible solution for ultra-low-voltage applications, a 0.5 V clock frequency generator is proposed and implemented. Significant performances, in terms of sub 1-ps jitter, 50 MHz-to-6.4 GHz frequency tuning range with 2 bands and sub 1-mW PDC, demonstrated the viable replacement of ring oscillators in low-voltage and low-jitter clock generator.
Tuan Anh LE Rim HAW Choong Seon HONG Sungwon LEE
Cubic TCP, one of transport protocols designed for high bandwidth-delay product (BDP) networks, has successfully been deployed in the Internet. Multi-homed computers with multiple interfaces to access the Internet via high speed links will become more popular. In this work, we introduce an extended version of Cubic TCP for multiple paths, called MPCubic. The extension process is approached from an analysis model of Cubic by using coordinated congestion control between paths. MPCubic can spread its traffic across paths in load-balancing manner, while preserving fair sharing with regular TCP, Cubic, and MPTCP at common bottlenecks. Moreover, to improve resilience to link failure, we propose a multipath fast recovery algorithm. The algorithm can significantly reduce the recovery time of data rate after restoration of failed links. These techniques can be useful for resilient high-bandwidth applications (for example, tele-health conference) in disaster-affected areas. Our simulation results show that MPCubic can achieve stability, throughput improvement, fairness, load-balancing, and quick data rate recovery from link failure under a variety of network conditions.
Several web sites providing disaster-related information failed repeatedly after the Great East Japan Earthquake, due to flash crowds caused by Twitter users. Twitter, which was intensively used for information sharing in the aftermath of the earthquake, relies on URL shorteners like bit.ly to offset its strict limit on message length. In order to mitigate the flash crowds, we examine the current Web usage and find that URL shorteners constitute a layer of indirection; a significant part of Web traffic is guided by them. This implies that flash crowds can be controlled by URL shorteners. We developed a new URL shortener, named rcdn.info, just after the earthquake; rcdn.info redirects users to a replica created on a CoralCDN, if the original site is likely to become overloaded. This surprisingly simple solution worked very well in the emergency. We also conduct a thorough analysis of the request log and present several views that capture user behavior in the emergency from various aspects. Interestingly, the traffic significantly grew up at previously unpopular (i.e., small) sites during the disaster; this traffic shift could lead to the failure of several sites. Finally, we show that rcdn.info has great potential in mitigating such failures. We believe that our experience will help the research community tackle future disasters.
Takashi SHIMIZU Yoshinori KOGAMI
Recent years, millimeter wave applications for wireless communication have attracted much attention and expected. We focused on an NRD guide and sapphire which have the excellent low loss characteristics in millimeter wave region. In this paper, an NRD guide excited sapphire disk resonator and millimeter wave bandpass filter with narrow bandwidth using proposed resonators were designed and fabricated. As a result, it was realized that the 3-pole bandpass filter with center frequency 58.64 GHz and 3 dB bandwidth 273 MHz. Moreover, its insertion loss was found to be about 1.5 dB.
Koji TAKEDA Tomonari SATO Takaaki KAKITSUKA Akihiko SHINYA Kengo NOZAKI Chin-Hui CHEN Hideaki TANIYAMA Masaya NOTOMI Shinji MATSUO
To meet the demand for light sources for on-chip optical interconnections, we demonstrate the continuous-wave (CW) operation of photonic-crystal (PhC) nanocavity lasers at up to 89.8 by using InP buried heterostructures (BH). The wavelength of a PhC laser can be precisely designed over a wide range exceeding 100 nm by controlling the lattice constant of the PhC. The dynamic responses of the PhC laser are also demonstrated with a 3-dB bandwidth of over 7.0 GHz at 66.2. These results reveal the laser's availability for application to wavelength division multiplexed (WDM) optical interconnection on CMOS chips. We discuss the total bandwidths of future on-chip optical interconnections, and report the capabilities of PhC lasers.
Ryeong-hee GWEON Yung-Lyul LEE
The next generation video coding standard HEVC shows high coding performance compared with the H.264/AVC standard, but the computational complexity of the HEVC encoder (HM3.0) is significantly higher. In this letter, the early termination of the CU encoding algorithm is proposed to reduce the computational complexity in the HEVC encoder. The proposed method reduces the encoder complexity by 58.7%, while maintaining the same level of coding efficiency.
Noriharu SUEMATSU Satoshi YOSHIDA Shoichi TANIFUJI Suguru KAMEDA Tadashi TAKAGI Kazuo TSUBOUCHI
A low cost, ultra small Radio Frequency (RF) transceiver module with integrated antenna is one of the key technologies for short range millimeter-wave wireless communication. This paper describes a 60 GHz-band transmitter module with integrated dipole antenna. The module consists of three pieces of low-cost organic resin substrate. These substrates are vertically stacked by employing Cu ball bonding 3-dimensional (3-D) system-in-package (SiP) technology and the MMIC's are mounted on each organic substrates by using Au-stud bump bonding (SBB) technique. The planer dipole antenna is fabricated on the top of the stacked organic substrate to avoid the influence of the grounding metal on the base substrate. At 63 GHz, maximum actual gain of 6.0 dBi is obtained for fabricated planar dipole antenna. The measured radiation patterns are agreed with the electro-magnetic (EM) simulated result, therefore the other RF portion of the 3-D front-end module, such as flip chip mounted IC's on the top surface of the module, does not affect the antenna characteristics. The results show the feasibility of millimeter-wave low cost, ultra small antenna integrated module using stacked organic substrates.
Satoshi YOSHIDA Shoichi TANIFUJI Suguru KAMEDA Noriharu SUEMATSU Tadashi TAKAGI Kazuo TSUBOUCHI
In order to realize millimeter-wave (MMW) 3-D system-in-package (SiP) front-end modules, we propose a 60-GHz band copper ball vertical interconnection structure, which interconnects between vertically stacked substrates. The structure enables ICs to be placed between the vertically stacked substrates. Since the diameter of the copper balls must exceed the thickness of the ICs, the distance between the substrates in the modules is larger than that of the flip-chip interconnection widely used in the MMW-band. Therefore, the conventional flip-chip interconnection does not scale for the interconnection between the substrates in MMW 3-D SiP front-end modules. The layout of grounded copper balls and the patterns of inner ground layers in the upper/lower substrates are designed using 3-D electromagnetic field simulation. The designed structure allows less than 1 dB transmission loss up to 71.1 GHz, compared with a through transmission line. The result is verified with fabrication and measurement and confirms the feasibility of MMW 3-D SiP front-end modules.
Jixin CHEN Wei HONG Hongjun TANG Pinpin YAN Li ZHANG Guangqi YANG Debin HOU Ke WU
In this paper, the research advances in silicon based millimeter wave and THz ICs in the State Key Laboratory of Millimeter Waves is reviewed, which consists of millimeter wave amplifiers, mixers, oscillators at Q, V and W and D band based on CMOS technology, and several research approaches of THz passive ICs including cavity and filter structures using SIW-like (Substrate Integrated Waveguide-like) guided wave structures based on CMOS and MEMs process. The design and performance of these components and devices are presented.
Sungyong YOON Hee-Suk PANG Koeng-Mo SUNG
We propose a new coding scheme for lossless bit rate reduction of the MPEG Surround module in unified speech and audio coding (USAC). The proposed scheme is based on context-adaptive arithmetic coding for efficient bit stream composition of spatial parameters. Experiments show that it achieves the significant lossless bit reduction of 9.93% to 12.14% for spatial parameters and 8.64% to 8.96% for the overall MPEG Surround bit streams compared to the original scheme. The proposed scheme, which is not currently included in USAC, can be used for the improved coding efficiency of MPEG Surround in USAC, where the saved bits can be utilized by the other modules in USAC.
Haoliang SUN Xiaohui HU Lixiang LIU
The existing routing protocols for the interplanetary backbone network did not consider future link connection and link congestion. A novel routing protocol named CAMARP for the interplanetary backbone network is proposed in this letter. We use wait delay to consider future link connection and make the best next hop selection. A load balancing mechanism is used to avoid congestion. The proposed method leads to a better and more efficient distribution of traffic, and also leads to lower packet drop rates and higher throughput. CAMARP demonstrates good performance in the experiment.
With the wide usage of multispectral images, a fast efficient multidimensional clustering method becomes not only meaningful but also necessary. In general, to speed up the multidimensional images' analysis, a multidimensional feature vector should be transformed into a lower dimensional space. The Hilbert curve is a continuous one-to-one mapping from N-dimensional space to one-dimensional space, and can preserves neighborhood as much as possible. However, because the Hilbert curve is generated by a recurve division process, 'Boundary Effects' will happen, which means data that are close in N-dimensional space may not be close in one-dimensional Hilbert order. In this paper, a new efficient approach based on the space-filling curves is proposed for classifying multispectral satellite images. In order to remove 'Boundary Effects' of the Hilbert curve, multiple Hilbert curves, z curves, and the Pseudo-Hilbert curve are used jointly. The proposed method extracts category clusters from one-dimensional data without computing any distance in N-dimensional space. Furthermore, multispectral images can be analyzed hierarchically from coarse data distribution to fine data distribution in accordance with different application. The experimental results performed on LANDSAT data have demonstrated that the proposed method is efficient to manage the multispectral images and can be applied easily.
Qingyong LI Yaping HUANG Zhengping LIANG Siwei LUO
Automatic thresholding is an important technique for rail defect detection, but traditional methods are not competent enough to fit the characteristics of this application. This paper proposes the Maximum Weighted Object Correlation (MWOC) thresholding method, fitting the features that rail images are unimodal and defect proportion is small. MWOC selects a threshold by optimizing the product of object correlation and the weight term that expresses the proportion of thresholded defects. Our experimental results demonstrate that MWOC achieves misclassification error of 0.85%, and outperforms the other well-established thresholding methods, including Otsu, maximum correlation thresholding, maximum entropy thresholding and valley-emphasis method, for the application of rail defect detection.
Kazuki MATSUDA Norimichi UKITA
This paper proposes a method for reconstructing a smooth and accurate 3D surface. Recent machine vision techniques can reconstruct accurate 3D points and normals of an object. The reconstructed point cloud is used for generating its 3D surface by surface reconstruction. The more accurate the point cloud, the more correct the surface becomes. For improving the surface, how to integrate the advantages of existing techniques for point reconstruction is proposed. Specifically, robust and dense reconstruction with Shape-from-Silhouettes (SfS) and accurate stereo reconstruction are integrated. Unlike gradual shape shrinking by space carving, our method obtains 3D points by SfS and stereo independently and accepts the correct points reconstructed. Experimental results show the improvement by our method.
Yanlei GU Mehrdad PANAHPOUR TEHRANI Tomohiro YENDO Toshiaki FUJII Masayuki TANIMOTO
In this paper, we present an automatic vision-based traffic sign recognition system, which can detect and classify traffic signs at long distance under different lighting conditions. To realize this purpose, the traffic sign recognition is developed in an originally proposed dual-focal active camera system. In this system, a telephoto camera is equipped as an assistant of a wide angle camera. The telephoto camera can capture a high accuracy image for an object of interest in the view field of the wide angle camera. The image from the telephoto camera provides enough information for recognition when the accuracy of traffic sign is low from the wide angle camera. In the proposed system, the traffic sign detection and classification are processed separately for different images from the wide angle camera and telephoto camera. Besides, in order to detect traffic sign from complex background in different lighting conditions, we propose a type of color transformation which is invariant to light changing. This color transformation is conducted to highlight the pattern of traffic signs by reducing the complexity of background. Based on the color transformation, a multi-resolution detector with cascade mode is trained and used to locate traffic signs at low resolution in the image from the wide angle camera. After detection, the system actively captures a high accuracy image of each detected traffic sign by controlling the direction and exposure time of the telephoto camera based on the information from the wide angle camera. Moreover, in classification, a hierarchical classifier is constructed and used to recognize the detected traffic signs in the high accuracy image from the telephoto camera. Finally, based on the proposed system, a set of experiments in the domain of traffic sign recognition is presented. The experimental results demonstrate that the proposed system can effectively recognize traffic signs at low resolution in different lighting conditions.
A differential pair of convergent and divergent lenses with adjustable lens spacing (“differential lens”) was devised as a varifocal lens and was successfully integrated into an object-space telecentric lens to build a focus mechanism with constant magnification. This integration was done by placing the front principal point of the varifocal lens at the rear focal point of the telecentric lens within a practical tolerance of positioning. Although the constant-magnification focus mechanism is a parallel projection system, a system for perfect perspective projection imaging without shifting the projection center during focusing could be built simply by properly setting this focus mechanism between an image-taking lens with image-space telecentricity and an image sensor. The focus resolution experimentally obtained was 0.92 µm (σ) for the parallel projection system with a depth range of 1.0 mm and this was 0.25 mm (σ) for the perspective projection system with a range from 120 to 350 mm within a desktop space. A marginal image resolution of 100 lp/mm was obtained with optical distortion of less than 0.2% in the parallel projection system. The differential lens could work up to 55 Hz for a sinusoidal change in lens spacing with a peak-to-valley amplitude of 425 µm when a tiny divergent lens that was plano-concave was translated by a piezoelectric positioner. Therefore, images that were entirely in focus were generated at a frame rate of 30 Hz for an object moving at a speed of around 150 mm/s in depth within the desk top space. Thus, three-dimensional (3-D) imaging that provided 3-D resolution based on fast focusing was accomplished in both microscopic and macroscopic spaces.
Junying XIA Xiaoquan XU Qi ZHANG Jiulong XIONG
Existing pose estimation algorithms suffer from either low performance or heavy computation cost. In this letter, we present an approach to improve the attractive algorithm called Orthogonal Iteration. A new form of fundamental equations is derived which reduces the computation cost significantly. And paraperspective camera model is used instead of weak perspective camera model during initialization which improves the stability. Experiment results validate the accuracy and stability of the proposed algorithm and show that its computational complexity is favorably compare to the O(n) non-iterative algorithm.
Bo LIU Peng CAO Min ZHU Jun YANG Leibo LIU Shaojun WEI Longxing SHI
This paper presents a novel architecture design to optimize the reconfiguration process of a coarse-grained reconfigurable architecture (CGRA) called Reconfigurable Multimedia System II ( REMUS-II ). In REMUS-II, the tasks in multi-media applications are divided into two parts: computing-intensive tasks and control-intensive tasks. Two Reconfigurable Processor Units (RPUs) for accelerating computing-intensive tasks and a Micro-Processor Unit (µPU) for accelerating control-intensive tasks are contained in REMUS-II. As a large-scale CGRA, REMUS-II can provide satisfying solutions in terms of both efficiency and flexibility. This feature makes REMUS-II well-suited for video processing, where higher flexibility requirements are posed and a lot of computation tasks are involved. To meet the high requirement of the dynamic reconfiguration performance for multimedia applications, the reconfiguration architecture of REMUS-II should be well designed. To optimize the reconfiguration architecture of REMUS-II, a hierarchical configuration storage structure and a 3-stage reconfiguration processing structure are proposed. Furthermore, several optimization methods for configuration reusing are also introduced, to further improve the performance of reconfiguration process. The optimization methods include two aspects: the multi-target reconfiguration method and the configuration caching strategies. Experimental results showed that, with the reconfiguration architecture proposed, the performance of reconfiguration process will be improved by 4 times. Based on RTL simulation, REMUS-II can support the 1080p@32 fps of H.264 HiP@Level4 and 1080p@40 fps High-level MPEG-2 stream decoding at the clock frequency of 200 MHz. The proposed REMUS-II system has been implemented on a TSMC 65 nm process. The die size is 23.7 mm2 and the estimated on-chip dynamic power is 620 mW.
The hyper H∞ filter derived in our previous work provides excellent convergence, tracking, and robust performances for linear time-varying system identification. Additionally, a fast algorithm of the hyper H∞ filter, called the fast H∞ filter, is successfully developed so that identification of linear system with impulse response of length N is performed at a computational complexity of O(N). The gain matrix of the fast filter is recursively calculated through estimating the forward and backward linear prediction coefficients of an input signal. This suggests that the fast H∞ filter may be applicable to linear prediction of the signal. On the other hand, an alternative fast version of the hyper H∞ filter, called the J-fast H∞ filter, is derived using a J-unitary array form, which is amenable to parallel processing. However, the J-fast H∞ filter explicitly includes no linear prediction of input signals in the algorithm. This work reveals that the forward and backward linear prediction coefficients and error powers of the input signal are indeed included in the recursive variables of the J-fast H∞ filter. These findings are verified by computer simulations.