Michinari SHIMODA Ryuichi IWAKI Masazumi MIYOSHI Toyonori MATSUDA
The diffraction of a plane electromagnetic wave by an impedance wedge whose boundary is described in terms of the skew coordinate systems is treated by using the Wiener-Hopf technique. The problem is formulated in terms of the simultaneous Wiener-Hopf equations, which are then solved by using a factorization and decomposition procedure and introducing appropriate functions to satisfy the edge condition. The exact solution is expressed through the Maliuzhinets functions. By deforming the integration path of the Fourier inverse transform, which expresses the scattered field, the expressions of the reflected field, diffracted field and the surface wave are obtained. The numerical examples for these fields are given and the characteristics of the surface wave are discussed.
This letter focuses on the design of a unified estimator for scheduled control in nonlinear systems with unknown parameter. An estimation law with a finite convergence time is formulated to compute the unknown scheduling parameter that drives a scheduled controller. This estimator can also be extended to the types of scheduled controllers addressed in the literature.
Kazuhisa YAMAUCHI Morishige HIEDA Kazutomi MORI Koji YAMANAKA Yoshitada IYAMA Tadashi TAKAGI
A large-signal simulation program for multi-stage power amplifier modules by using a novel interpolation is presented. This simulation program has the function to make the Load-Pull and Source-Pull (LP/SP) data required for the simulation. By using the interpolation, a lot of LP/SP data can be made from a small number of measured LP/SP data. The interpolation is based on the calculation method using a two-dimensional function. By using the simulation program, we can calculate the large-signal characteristics depended on frequency and temperature of the multi-stage amplifier module. We apply the simulation program to the design of the amplifier. The calculated and measured results agree well. The accuracy of the presented interpolation is confirmed. It is considered that the presented program is useful to calculate large-signal characteristics of the amplifier module.
Kouji SHIBATA Osamu HASHIMOTO Kouji WADA
A method for estimating complex permittivity of a material using a rectangular waveguide with a flange is presented by the finite difference time domain (FDTD) method. An advantage of the present method is that it is not necessary to vary the material structure in order to insert it into the waveguide. Therefore estimation errors related to the dimensions of the material are almost negligible. In this case, fluoridated rubber is chosen as the low-loss material. The comparison of the complex permittivity of the material determined by the present method with FDTD and the conventional waveguide method at 10 GHz is performed. It was confirmed that the present method is effective for estimating the complex permittivity under the condition that the length of the flange is about 50 mm (1.7λ) square.
The finite-difference time-domain (FDTD) method incorporating Berenger's PML absorbing boundary condition is developed to model three-dimensional dielectric resonators. The fast Fourier transform (FFT) coupled with the Pade interpolation technique is employed to obtain frequency domain results with satisfactory resolution and accuracy, and to reduce the computation time significantly compared with that needed when the conventional FFT algorithm is used. Computed resonant frequencies of two types of cylindrical dielectric resonators are compared with theoretical and measured results. A good agreement is observed.
Hiroko O. UEDA Masashi NAKATA Takesi MURATA Hideyuki USUI Masaki OKADA Koichi ITO
We propose the architecture of efficiently and flexibly extensible solver system for electromagnetic wave simulations, that can load multi kinds of schemes such as Finite-Difference Time-Domain (FDTD) scheme, Finite Element Method (FEM), and a circuit simulator, with various boundary conditions in the system. Object-oriented approach is a promising method for efficient development of the flexible simulator. The primary object in the architecture is found through our object-oriented analysis as decomposed "region" from whole the simulation space. The decomposed region is considered to be the stage on which the electromagnetic fields play under the local rules. Developers who will extend the functionality of the system can add new classes inherited from the abstract classes in our design depending on the grid structure, the scheme, or the boundary processing method.
Chien-Ching CHIU Ching-Lieh LI Wei CHAN
The genetic algorithm is used to reconstruct the shapes of multiple perfectly conducting cylinders. Based on the boundary condition and the measured scattered field, a set of nonlinear integral equations is derived and the imaging problem is reformulated into an optimization problem. The genetic algorithm is then employed to find out the global extreme solution of the object function. Numerical examples are given to demonstrate the capability of the inverse algorithm. Good reconstruction is obtained even when the multiple scattering between two conductors is serious. In addition, the effect of Gaussian noise on the reconstruction results is investigated.
Kohei FUJII Fadhel M. GHANNOUCHI Toshiyuki YAKABE Hatsuo YABE
This paper describes an improved nonlinear GaAs FET model and its parameter extraction procedure for almost all operating conditions such as the small-signal condition, the power saturated condition, and the controlled-resistance condition. The model is capable of modeling the gate voltage dependent drain current and its derivatives in the saturated region as well as the drain voltage dependent drain current and its derivatives in the linear region. The model can take into account the frequency dispersion effects of both transconductance and output conductance. The model describes forward conduction and reverse conduction currents. Deriving the capacitance part of the model from unique charge equations satisfies charge conservation. The model accurately predicts voltage-dependent S-parameters, spurious response in an active condition and inter-modulation response in the controlled-resistance condition of a GaAs FET.
Kazuyuki SAITO Takeshi TANIGUCHI Hiroyuki YOSHIMURA Koichi ITO
The microwave coagulation therapy has been used mainly for the treatment of hepatocellular carcinoma (small size tumor in the liver). In the treatment, a thin microwave antenna is inserted into the tumor, and the microwave energy heats up the tumor to produce the coagulated region including the cancer cells. At present, a problem occurs: the size of the coagulated region is insufficient, especially in the perpendicular direction of the antenna axis. In order to overcome this problem without increasing the physical load of the patient, the authors introduced a new type of array applicator composed of two coaxial-slot antennas. However, we cannot estimate heating characteristics of this array applicator precisely by using the FDTD calculation, because the use of staircasing approximation, which employs rectangular parallelepiped cells, is unsuitable for the analysis. Therefore, in this paper, we introduce the finite element method (FEM), which employs tetrahedral cells, to estimate the heating characteristics of the array applicator.
Nagayoshi MORITA Yutaka YOSHIOKA Norihiro HOSOYA
A simulation tool for analyzing circuit characteristics of microstrip-type MIC (Microwave Integrated Circuit) passive elements is presented. The major part of this tool is the electromagnetic wave analysis based on the FD-TD (Finite-Difference Time-Domain) method combined with the mode expansion theory. Although the element structures which can be treated in this tool are limited to only less than ten fundamental structures in the present stage, its extension to the more versatile tool applicable to other various element types is rather straightforward and simple in principle. When using this tool, we first choose the element configuration to be calculated and give, on a panel, necessary parameter values related to calculation range and mesh division scheme. Given these values, the first step calculation starts to obtain the characteristic impedance, cross sectional field distribution of the propagating mode, etc. of the basic microstrip line. Field distributions around the element configulation are calculated next with the mode field oscillation being given. Through this process the field distributions on a closed rectangular parallelepiped surface enclosing the element configuration are stored in files, from which S parameter and radiated fields are calculated by invoking the reaction integral with propagation modes and radiation modes, respectively. The results obtained in these three steps can be expressed, at our discretion, as line drawings or two-dimensional density plots.
Nyakoe George NYAUMA Makoto OHKI Suichiro TABUCHI Masaaki OHKITA
The ultrasonic wave is widely used for acquiring perceptual information necessary for indoor/outdoor navigation of mobile robots, where the system is implemented as a sound navigation and ranging system (sonar). A robot equipped with multiple ultrasonic sonars is likely to exhibit undesirable operation due to erroneous measurements resulting from cross-talk among the sonars. Each sonar transmits and receives a pulse-modulated ultrasonic wave for measuring the range and identifying its own signal. We propose a technique for generating pulse patterns for multiple concurrently operated ultrasonic sonars. The approach considers pulse-pattern generation as a combinatorial optimization problem which can be solved by a genetic algorithm (GA). The aim is to acquire a pulse pattern satisfying certain conditions in order to avoid cross-talk or keep the probability of erroneous measurement caused by cross-talk low. We provide a method of genotype coding for the generation of the pulse pattern. Furthermore, in order to avoid a futile search encountered when the conventional technique is used, we propose an improved genotype coding technique that yields considerably different results from those of the conventional technique.
This paper presents a novel concept of a Two-Dimensional (2-D) Finite-Difference Time-Domain (FDTD) formulation for the numerical analysis of electromagnetic fields. FDTD method proposed by Yee is widely used for such analysis, although it has an inherent problem that there exist half-cell-length and half-time-step distances between electric and magnetic field components. To dissolve such distances, we begin with the finite-difference approximation of the wave equation, not Maxwell's equations. Employing several approximation techniques, we develop a novel algorithm which can condense all field components to equidistant discrete nodes. The proposed algorithm is evaluated in comparison with several conventional algorithms by computer simulations.
Mobile communication channels always suffer serious frequency-selective fading due to multipath effect. Traditional spreading codes are characterized by the fact that their time-domain orthogonality is based on fixed chip width across a code period. They often fail to perform well under frequency-selective fading. This paper proposes a new class of CDMA codes, wavelet-packet orthogonal codes capable to retain time-domain orthogonality as well as to offer intra-code subband diversity to mitigate frequency-selective fading. The new codes are constructed by congregating several wavelets with various dilations and shifts. The combination of the wavelets in different nodes in a wavelet-packet full binary tree enables frequency diversity capability. Owing to the even code length, they can be easily used in mobile communications for multi-rate streaming and multi-code spreading. The performance study is carried out using correlation statistics distribution convolution algorithm and the results reveal that wavelet-packet codes, combined with RAKE receiver, perform better than traditional spreading codes in frequency-selective fading channels.
Mohamad A. ALSUNAIDI Tatsuo KUWAYAMA Shigeo KAWASAKI
This paper presents the characterization and validation of a time-domain physical model for illuminated high-frequency active devices and shows the possibility of use of the electromagnetic analysis of FDTD not only for electromagnetic interaction and scattering but also for the device simulation as a good candidate for a microwave simulator. The model is based on Boltzmann's Transport Equation, which accurately accounts for carrier transport in microwave and millimeter wave devices with sub-micrometer gate lengths. Illumination effects are accommodated in the model to represent carrier density changes inside the illuminated device. The simulation results are compared to available experimental records for a typical MESFET for validation purposes. Simulation results show that the microscopic as well as the macroscopic characteristics of the active device are altered by the light energy. This fact makes the model an important tool for the active device design method under illumination control.
Young-Hwan YOU Jong-Ho PAIK Min-Chul JU Cheol-Hee PARK Jin-Woong CHO Hyoung-Kyu SONG
In this letter, we present a coarse frequency-offset synchronization technique for Eureka-147 DAB receiver. The proposed frequency-offset synchronization algorithm using two defined correlation functions is shown to have high robustness against a large range of symbol timing offset with a moderate implementational complexity.
Most of the previous controllers proposed for output regulation problems on uncertain nonlinear systems tried to keep the state variables to the nominal equilibrium points. In this letter, however, the dynamic state feedback controller makes the state variables follow the perturbed equilibrium points computed from an equilibrium-estimator.
Jin NAKAZAWA Yoshito TOBE Hideyuki TOKUDA
In forthcoming home network environment, computation capability will be embedded invisibly in home appliances, sensors, walls, ceilings, and floors. People will conduct various tasks using multiple devices simultaneously without consciousness of using computers. In this paper, first, we propose an application model named Virtual Network Appliance (VNA) model which simplify and expand device utilization. In the model, each device has VNA runtime system and function objects, called VNA components, running on it. A user task is defined in an application called VNA which is a logical appliance consisting of abstract function requirements and a message graph among them. Second, we propose Virtual Plug&Play mechanism which is a dynamic service integration mechanism in VNA model implementation. When a user conducts a task, he/she makes a VNA runtime system on a user-side terminal load a VNA definition appropriate for the task. Virtual Plug&Play dynamically discovers required VNA components and establishes the message graph as defined. Since XML documents are used to describe a VNA, users can share and customize it easily. We call the device integration done by Virtual Plug&Play top-down integration, which existing middleware do not aim at. Finally, we show that Virtual Plug&Play affords practical performance for top-down integration by performance evaluation.
In the current digital mobile communication that is used in the micro cellular system, a Self-Organized Dynamic Channel Assignment (DCA) Method has been proposed to use frequencies effectively. However, its characteristics and operational matters have not been reported yet. This paper takes up the TDMA/TDD system used in the current PHS system and also evaluates the characteristics and operational matters of this method through the actual operational tests. In addition, this paper aims to propose a new DCA method in order to speed up the Channel Segregation and evaluates its effects through the actual operational tests.
Abbas SANDOUK Masaaki HARADA Hiraku OKADA Takaya YAMAZATO Masaaki KATAYAMA Akira OGAWA
In this letter, we present bit error analysis (BER) of orthogonal multi-carrier direct sequence code division multiple access (DS-CDMA) system with multi-rate (multimedia) traffic. Analysis is carried out with random signature codes for an AWGN channel. Interference in such a system is severe because all users of all media transmit over the same assigned sub-carriers. This makes the analysis difficult. In our analysis, we divide this interference into different types and carry out our analysis to obtain the BER taking into account all these types. We show that the performance of the system is improved as the number of assigned sub-carriers M increases until a limit where the improvement does not continue even when M increases more. This is because of, as we show, the interference due to other sub-carriers becomes constant even in the case of M , and the interference in a multi-rate multi-carrier system is bigger than that in a single-carrier (M=1) by a factor of π2/3.
Heun-Soo LEE Naoyuki KARASAWA Keisuke NAKANO Masakazu SENGOKU
This paper discusses the teletraffic characteristics of cellular systems using Dynamic Channel Assignment. In general, it is difficult to exactly and theoretically analyze the teletraffic characteristics of Dynamic Channel Assignment. Also, it is not easy to theoretically evaluate influence of mobility on the traffic characteristics. This paper proposes approximate techniques to analyze teletraffic characteristics of Dynamic Channel Assignment considering mobility. The proposed techniques are based on Clique Packing approximation.