This paper describes an all-optical label swapping for the photonic label switching router (LSR). The optical code routing photonic LSR in which label is mapped onto an optical code is one of the most promising photonic network technologies. It utilizes such unique features of optical code division multiplexing (OCDM) as asynchronous transmission, tell-and-go access protocol, and high degree of scalability. In practical photonic LSRs, all optical code conversion will play an important role. All-optical code conversion of 10 Gbit/s binary phase-shift keying (BPSK) codes by use of cross-phase modulation (XPM) in an optical fiber without wavelength-shift is proposed for the photonic LSR and experimentally demonstrated.

Based on genetic algorithm (GA) in this paper we present a simple method to extract distributed circuit parameters of a multiple coupled nonuniform microstrip transmission lines from it's measured or computed S-parameters. The lines may be lossless or lossy, with frequency dependent parameters. First a sufficient amount of information about the system is measured or computed over an specified frequency range. Then this information is used as an input for a GA to determine the inductance and capacitance matrices of the system. The theory used for fitness evaluation is based on the steplines approximation of the nonuniform transmission lines and quasi-TEM assumptions. Using steplines approximation the system of coupled nonuniform transmission lines is subdivided into arbitrary large number of coupled uniform lines (steplines) with different characteristics. Then using modal decomposition method the system of coupled partial differential equations for each step is decomposed to a number of uncoupled ordinary wave equations which are then solved in frequency-domain.

We analyze the performance of soft handoff used as intergroup handoff in the fiber-optic cellular system. Performance is evaluated in view of blocking and handoff refused probability. The numerical results show that the smaller the handoff region or the more the channel, the larger the system capacity.

This paper describes a novel IDDQ sensor circuit that is driven by only an abnormal IDDQ. The sensor circuit has relatively high sensitivity and can operate at a low supply voltage. Based on a very simple idea, it requires two additional power supplies. It can operate at either 5-V or 3.3-V VDD with the same design. Simulation results show that it can detect a 16-µA abnormal IDDQ at 3.3-V VDD. This sensor circuit causes a smaller voltage drop and smaller performance penalty in the circuit under test than other ones.

Nonlinear behavior of electromagnetic surface waves propagating along a tangentially magnetized ferrite slab is investigated. The nonlinear Schrodinger equation (NLSE) which describes the temporal evolution of the electromagnetic wave pulses has been derived directly from the Maxwell equations and the equation of precessional motion for the magnetization in the ferrite slab with the aid of the reductive perturbation method without magnetostatic approximation. Based on the formula derived, we have numerically evaluated the frequency-dependence of the nonlinear coefficient in the NLSE for both a magnetostatic surface wave mode and a dynamic mode. As a result, we have confirmed the possibility of the propagation of solitons in the waveguide.

Blind channel estimation algorithm which is applicable to the time-variant channel under frequency-selective fading is proposed. The condition on the blind channel identifiability using temporally and spatially oversampled data is shown. The proposed algorithm consists of two stages. At the first stage, the channel equalization matrix is estimated by taking account of the time-variant characteristics of the channel. At the second stage, the signals and the channel matrix are alternately estimated by using the finite alphabet property of the transmitted symbols. Periodical return from the second stage to the first makes the blind estimation algorithm feasible for the time-variant channel with fast fading. The simulation results confirm the fast convergence property and the effectiveness of the proposed algorithm in coping with the frequency-selective fading.

The alignment of a nematic liquid crystal (LC) parallel to the polarization direction of the laser could be induced by three types of polyimide (PI) films, a PI based on aromatic dianhydride and two PIs on alicyclic dianhydride, exposed to polarized pulsed laser at 266 nm at high fluence in air. The UV-visible absorption spectra of the PI films showed that a remarkable chemical change occurred after exposure at the high fluence in air. In contrast, in argon atmosphere the PI based on aromatic dianhydride was radiation-resistant and the exposed PI film could induce alignment of the LC molecules parallel to laser polarization. We estimate that the mechanism of the parallel alignment observed in argon is not the photodegradation but the orientation of the PI molecules.

Low luminous efficacy is one of the major drawbacks of PDPs, with the discharge being the predominant limiting factor. Numeric simulations granting deeper insight in the core processes of the discharge are presented and the key parameters influencing the plasma efficiency are examined.

GSRI Pragmatic TCM, which is a Pragmatic Trellis Coded Modulation allowing bandwidth expansion, has been proposed. In [1], it is shown that this scheme can achieve higher performance than conventional Pragmatic TCM scheme. On the other hand, a real-time video multimedia communication is one of the possible applications for the third generation mobile communication systems. This video multimedia communication system needs a multiplexer which mixes various types of media such as video, voice and data into a single bitstream. ITU-T has standardized H.223 Annex A, B, C and D multimedia multiplexing protocols for low bit-rate mobile communications. This paper evaluates the performance of the GSRI Pragmatic TCM with an application of a mobile multimedia system using H.223 Annex D multiplexing scheme and MPEG-4 video coding.

This work presents a frame-structure, referred to as CATM (CATV ATM), to serve as a wireless network infrastructure. The widespread CATV (Community Antenna TV) networks are attractive infrastructures for next generation wireless networks. Providing interactive broadband services over CATV networks is a major trend in communication and ATM (Asynchronous Transfer Mode) networks with broadband communication features well fitted to be the backbone of CATV networks. Based on the proposed network architecture, this work addresses and investigates the problems of call setup and handoff handling. This work also proposes a wireless signaling protocol for establishing mobile connections over the CATM-based wireless networks. To enhance bandwidth utilization, the proposed scheme attempts to keep the path resulting after handoff as short as possible. The protocol also evolves a seamless handoff scheme (denoted as SHSW-CATM), that can preserve data continuity, is transparent to other mobile terminals, and produces a shorter path. Analytical results reveal that the SHSW-CATM has a high probability of obtaining an optimal path (that is, a non-elongated path) following mobility.

The problem of self-timed implementation of Boolean functions is explained. The notions of combinational delay-insensitive code and delay-insensitive function are defined, giving precise conditions under which memoryless self-timed implementation of Boolean functions is feasible. Examples of combinational delay-insensitive code and delay-insensitive function are given. Generic design style, using standard CAD library, for constructing quasi delay-insensitive self-timed function blocks is suggested. Our design style is compared to other self-timed function block design styles.

The Next Generation Internet Initiative was launched in the U.S. to advance key networking technologies that will enable a new wave of applications on the Internet. Now, in its third year, the program has launched and fostered over one hundred new research projects in partnership with academic, industrial and government laboratories. One key research area that has been emphasized within the program is the next-generation optical networking. Given the ever increasing demand for network bandwidth, and the recent phenomenal advances in WDM technologies, the Next Generation Internet is expected to be an IP-based optical WDM network. As IP over WDM networking technologies mature, a number of important architectural, management and control issues have surfaced. These issues need to be addressed before a true Next Generation Optical Internet can emerge. This paper provides a brief introduction to the overall goals and activities of DARPA's NGI program and describes the key architectural, management, and control issues for the Optical Internet. We review the different IP/WDM networking architectural models and their tradeoffs. We outline and discuss several management and control issues and possible solutions related to the configuration, fault, and performance management of IP over dynamic WDM networks. We present an analysis and supporting simulation results demonstrating the potential benefits of dynamic IP over WDM networks. We then discuss the issues related to IP/WDM traffic engineering in more detail, and present the approach taken in the NGI SuperNet Network Control and Management Project funded by DARPA. In particular, we motivate and present an innovative integrated traffic-engineering framework for re-configurable IP/WDM networks. It builds on the strength of Multi-Protocol Label Switching (MPLS) for fine-grain IP load balancing, and on the strength of Re-configurable WDM networking for reducing the IP network's weighted-hop-distance, and for expanding the bottleneck bandwidth.

A "dual-ring" network configuration is proposed in wavelength-division multiplexing (WDM) metropolitan area network (MAN). In the proposed architecture, a "sub-ring" using two fibers is added to the existing metropolitan WDM ring for flexible and cost effective addition of new nodes.

An iterative decoder of turbo code over an inter-symbol interference channel is proposed. A component decoder realizes decoding and equalization simultaneously with the soft-output Viterbi algorithm (SOVA). A decoding algorithm and simulation results are shown.

This paper describes experimental results of the IP traffic condition based dynamic optical path allocation network system. In the system, optical paths are dynamically allocated between congested node pairs to cope with traffic fluctuations. It seems that this experiment is the first of its kind in the world.

This paper analyzes a generalized secret-key authentication system from a viewpoint of the information-spectrum methods. In the generalized secret-key authentication system, for each n 1 a legitimate sender transmits a cryptogram Wn to a legitimate receiver sharing a key En in the presence of an opponent who tries to cheat the legitimate receiver. A generalized version of the Simmons' bounds on the success probabilities of the impersonation attack and a certain kind of substitution attack are obtained.

Session length and group size are two most significant factors in achieving efficient scheduling for unicast and multicast traffic in single-hop wavelength division multiplexing (WDM) local area networks (LANs). This paper presents a hybrid protocol to schedule both unicast and multicast traffic in broadcast WDM networks. The protocol makes an important assumption that unicast traffic is the major portion of the overall traffic and is usually scheduled with a pre-allocation-based protocol. On the other hand, multicast traffic is a smaller portion of the overall traffic with multicast sessions and multicast groups, and is scheduled with a reservation-based protocol. The concept of multicast threshold, a function of random variables including the multicast session length and the multicast group size, is also proposed to partition the multicast traffic into two types. If the transmission threshold of a multicast request is larger than the multicast threshold, the request is handled with a reservation-based protocol. Otherwise, the multicast request is handled similar to unicast traffic; that is, each packet in the multicast session is replicated and sent to the unicast queues of destinations. The results show that the hybrid protocol can achieve better channel utilization efficiency and packet delay for unicast traffic under the multicast scenarios with moderate session length and group size. However, separate scheduling or broadcasting will be more suitable for a multicast scenario with very large session length and group size, which is not common on most realistic networks.

In this paper, we propose an adaptive IIR equalizer based on prefiltering techniques. The proposed equalizer has a cascade structure of an ARMA prefilter and an adaptive FIR equalizer. The ARMA prefilter is designed based on the transfer function estimated by the gradient-type instrumental variable algorithm. Simulation results are shown to confirm the performance of the proposed adaptive IIR equalizer.

This paper investigates noise enhancement factors of a zero-forcing detector and a decision feedback detector for synchronous Multiple Input Multiple Output (MIMO) channels. It is first shown that the zero-forcing and decision feedback detectors can be implemented in a vector digital filter form, and the noise enhancement factors with the detectors can easily be calculated by using the vector digital filter form. This paper then applies the zero-forcing and decision feedback detectors to the signal detection of a frequency-overlapped multicarrier signaling (FOMS) system. The normalized noise enhancement factor, which is given as a product of the noise enhancement and bandwidth reduction factors, is shown to be smaller with the decision feedback detector than the zero-forcing detector. Results of computer simulations conducted to evaluate bit error rate (BER) performances with the two detectors are also shown together with the BER performance with a conventional channel-by-channel detector.

In this paper, we propose a call arrival history-based location tracking strategy for a variable call arrival rate over time. The basis of the proposed strategy is a time-based location tracking strategy. A mobile terminal obtains the up-to-date information about changes in the call arrival rate by maintaining its call arrival history, from which it can calculate an appropriate timeout interval for a variable call arrival rate. We present a simple analytical model and numerical results to investigate its performance for both a fixed and a variable call arrival rate which is modeled by a Markov-modulated Poisson process.