DOA (Direction Of Arrival) estimation is a useful technique in various positioning applications including the DOA-based adaptive array antenna system. This paper presents a practical implementation of FPGA (Field Programmable Gate Array) based fast DOA estimator for wireless cellular basestation. This system incorporates spectral unitary MUSIC (MUltiple SIgnal Classification) algorithm, which is one of the representative super resolution DOA estimation techniques. This paper proposes a way of digital signal processor design suitable for FPGA and its real hardware implementation. In this system, all digital signal processing procedures are computed by the only fixed-point operation with finite word-length for fast processing and low power consumption. The performance will be assessed by hardware level simulations and experiments in a radio anechoic chamber.

In this paper, the design of a mobile satellite Internet access (MSIA) system and a mobile broadband satellite access system, called Mobile Broadband Interactive Satellite Multimedia Access Technology System (MoBISAT) are presented. MSIA system provides Internet service, broadcasting, and digital A/V service in both fixed and mobile environments using Ku-band geostationary earth orbit (GEO) satellite. A Ku-band two-way active phased array antenna installed on top of the transportation vehicles can enable the transmission of signals to satellite as well as signal tracking and reception. The forward link and return link are a high speed Time Division Multiplex (TDM) and TDMA transmission media, respectively, both of which carry signaling and user traffic. The MoBISAT, which is a next generation mobile broadband satellite access system, provides both Ku-band satellite TV and Ka-band high-speed Internet to the passengers and crews for land, maritime, and air vehicles. This paper addresses the main technological solutions adopted for the implementation and test results for the MSIA system and the main design features of the MoBISAT system.

This paper presents a multipath interference canceller (MPIC) configuration based on multipath interference (MPI) replica generation per transmit antenna (called PTA-MPIC). This configuration is associated with Space Time Transmit Diversity (STTD) for the common control physical channel (CCPCH), which takes advantage of tentative decision data after STTD decoding, and with closed-loop type phase control (PC) transmit diversity for the dedicated physical channel (DPCH) employing tentative decision data after diversity combining, in the W-CDMA forward link. This paper also proposes transmitter carrier phase verification, i.e., an antenna verification method used in PC transmit diversity, that utilizes the dedicated pilot symbols in a DPCH after the PTA-MPIC removes the MPI components. The one-stage PTA-MPIC removes the MPI from the common pilot channel (CPICH), the CCPCH, and the synchronization channel (SCH). The simulation results show that this canceller reduces the required average transmit Eb/N0 of the DPCH at the average BER of 10-3 by approximately 3.0 dB compared to that using a MF-based Rake receiver (the transmit power ratio of each common channel to DPCH is RCPICH/DPCH = 3 dB, RCCPCH/DPCH = 5 dB, and RSCH/DPCH = 3 dB, with TPC and without antenna diversity reception at the user equipment). Furthermore, it is shown that in the two-stage PTA-MPIC with MPI suppression for all channels associated with PC transmit diversity, the required average transmit Eb/N0 employing the proposed antenna verification is reduced by approximately 0.3 dB, 0.5 dB, and 1.2 dB compared to that using the conventional antenna verification when the transmission power ratio of the interfering DPCH to the desired DPCH is RInt/Des = 0 dB, 3 dB, and 6 dB for ten DPCHs. This is because the number of detection errors of the transmitted carrier phase in the second antenna due to feedback information bit decoding error is reduced.

We report a flexible and lightweight wearable microstrip antenna that can be sewn into clothing and hats. This antenna is composed of felt and a conductive woven fabric. Experimental results clearly show that this antenna operates normally as a conventional microstrip antenna, and is practical and feasible for personal satellite communications.

Smart or adaptive antennas promise to provide significant space-time communications against fading in wireless communication systems. In this paper, we propose multiple-input multiple-output (MIMO) beamforming for frequency-selective fading channels to maximize the Signal-to-Noise and Interference Ratio (SINR) based on an iterative update algorithm of transmit and receive weight vectors with prior knowledge of the channel state information (CSI) at both the transmitter and receiver. We derive the necessary conditions for an optimum weight vector solution and propose an iterative weight update algorithm for an optimal SINR reception. The Maximum Signal-to-Noise (MSN) method, where noise includes the additive gaussian noise and interference signals, is used as a criterion. The proposed MIMO with M N arrays allows the cancellation of M + N - 2 delayed channels. Computer simulations are presented to verify our analysis. The results show that significant improvements in performance are possible in wireless communication systems.

Diagonal algebraic space time (DAST) block codes was proved to achieve the full transmit diversity over a quasi-static fading channel and to maintain 1 symbol/s/Hz. When the number of transmit antennas employed is larger than 2, DAST codes outperform the codes from orthogonal design with the equivalent spectral efficiency. However, due to the limitation on the signal constellation with complex integer points, no good 3bits/symbol DAST block code was given previously. In this paper, we propose a general form of 8-star-PSK constellations with integer points and present some theoretical results on the performance of the equivalent 8-star-PSK modulations. By using our proposed 8-star-PSKs, we present a searching algorithm to construct DAST codes with 3 bits per symbol under some criteria and investigate their performances over flat Rayleigh fading channels. It is shown that (5,2) 8-star-PSK scheme has a comparable performance to conventional 8PSK over additive white Gaussian noise (AWGN) channel and the corresponding DSAT codes constructed can achieve significant performance gain over flat Rayleigh fading channel.

Orthogonal multicode direct sequence code division multiple access (DS-CDMA) has the flexibility in offering various data rate services. However, in a frequency-selective fading channel, the bit error rate (BER) performance is severely degraded since the othogonality among spreading codes is partially lost. In this paper, we apply frequency-domain equalization and antenna diversity combining, used in multi-carrier CDMA (MC-CDMA), to orthogonal multicode DS-CDMA in order to restore the code othogonality while achieving frequency and antenna diversity effect. It is found by computer simulations that the joint use of frequency-domain equalization and antenna diversity combining can significantly improve the BER performance of orthogonal multicode DS-CDMA in a frequency-selective fading channel.

In this paper, a meander-type microstrip patch antenna for application in 5 GHz-band is designed and fabricated. To obtain enough bandwidth in VSWR<2, the foam is inserted between substrate and ground plane, the coaxial probe source is used. The measured result of fabricated antenna is obtained 1 GHz (17.5%) of bandwidth in VSWR<2, the gain of 7.3-9.5 dBi and unidirectional pattern.

Multiple-input multiple-output (MIMO) systems can improve the spectral efficiency of a wireless link, by transmitting several data streams simultaneously from different transmit antennas. However, at the receiver, multi-stream detection is needed for extracting the transmitted data streams from the received signals. This letter considers ordered successive detection (OSD) for multi-stream detection. OSD consists of several stages, and at each stage only one data stream is chosen to be detected among the remaining streams according to a specified ordering metric. OSD has been formulated using both the zero forcing (ZF) and minimum mean square error (MMSE) criteria. This letter clarifies the reason behind the superiority of OSD using the MMSE criterion to OSD using the ZF criterion through the investigation of the relation between their ordering metrics. For uncorrelated MIMO channels, we show that both ordering metrics yield the same performance for OSD using either ZF or MMSE criterion. Accordingly, the superiority of OSD using the MMSE criterion to OSD using the ZF criterion is clarified to be a direct result of the inherent superiority of MMSE nulling to ZF nulling, and to be independent of the ordering operation. Performance comparisons of OSD and maximum likelihood detection are also given for modulation schemes of different sizes.

An automatic-repeat-request (ARQ) scheme for improving the system throughput efficiency is evaluated in coded multiple-input multiple-output (MIMO) transmissions. Supplementary trellis-coded modulation (TCM) code has been proposed for hybrid ARQ schemes. The free distance of the TCM after code combining can be increased by employing different TCM codes for retransmissions. The MIMO scheme offers additional flexibility in preventing successive frame errors by changing the connections between transmitters and transmit antennas upon retransmission. In this paper, an ARQ strategy employing both TCM reassignment and antenna permutation technique is investigated. It is shown through computer simulations that this ARQ scheme achieves high throughput even in severe conditions of low signal-to-noise ratio and high Rician factor over spatially and temporally correlated Nakagami-Rice fading MIMO channels.

Quality of Service (QoS) provisioning is a new but challenging research area in the field of Mobile Ad hoc Network (MANET) to support multimedia data communication. However, the existing QoS routing protocols in ad hoc network did not consider a major aspect of wireless environment, i.e., mutual interference. Interference between nodes belonging to two or more routes within the proximity of one another causes Route Coupling. This can be avoided by using zone-disjoint routes. Two routes are said to be zone disjoint if data communication over one path does not interfere with the data communication along the other path. In this paper, we have proposed a scheme for supporting priority-based QoS in MANET by classifying the traffic flows in the network into different priority classes and giving different treatment to the flows belonging to different classes during routing so that the high priority flows will achieve best possible throughput. Our objective is to reduce the effect of coupling between routes used by high and low priority traffic by reserving zone of communication. The part of the network, used for high priority data communication, i.e, high priority zone, will be avoided by low priority data through the selection of a different route that is maximally zone-disjoint with respect to high priority zones and which consequently allows contention-free transmission of high priority traffic. The suggested protocol in our paper selects shortest path for high priority traffic and diverse routes for low priority traffic that will minimally interfere with high priority flows, thus reducing the effect of coupling between high and low priority routes. This adaptive, priority-based routing protocol is implemented on Qualnet Simulator using directional antenna to prove the effectiveness of our proposal. The use of directional antenna in our protocol largely reduces the probability of radio interference between communicating hosts compared to omni-directional antenna and improves the overall utilization of the wireless medium in the context of ad hoc wireless network through Space Division Multiple Access (SDMA).

In this paper, a simple blind algorithm for a beamforming antenna is proposed. This algorithm exploits the property of cyclostationary signals whose cyclic autocorrelation function depends on delay as well as frequency. The cost function is the mean square error between the delay product of the beamformer output and a complex exponential. Exploiting the delay greatly reduces the possibility of capturing undesired signals. Through analysis of the minima of the non-quadratic cost function, conditions to extract a single signal are derived. Application of this algorithm to code-division multiple-access systems is considered, and it is shown through simulation that the desired signal can be extracted by appropriately choosing the delay as well as the frequency.

Adaptive antenna array is a promising technique to increase the link capacity in mobile radio communications systems by suppressing multiple access interference (MAI). In the mobile radio, the received signal consists of discrete paths, each being a cluster of many irresolvable paths arriving from different directions. For large arrival angle spread of each cluster of irresolvable paths, antenna array cannot form a beam pattern that sufficiently suppresses MAI even in the presence of single interference signal and hence, the transmission performance may degrade. In this situation, the use of antenna diversity may be a better solution. It is an interesting question as to which can achieve a better performance, antenna diversity reception or adaptive antenna array. In this letter, we study the impact of the arrival angle spread on the DS-CDMA transmission performances achievable with adaptive antenna array and antenna diversity reception. It is pointed out that the arrival angle spread is an important parameter to determine the performances of adaptive antenna array and antenna diversity.

This paper presents a novel algorithm which generates a beam pattern having maximum gain towards target direction. The new technique utilizes a Generalized Conjugate Gradient Method (CGM) based on the conventional CGM for obtaining the optimal weight vector. The proposed method finds a weight vector that maximizes the SINR (Signal to Interference plus Noise Ratio). Based on the an analysis of the results of various computer simulations, it is observed that the proposed algorithm is suitable for the IS2000 1X mobile communication environments.

In this paper, we present a new closed-form formula for the ergodic capacity of multiple-input multiple-output (MIMO) wireless channels. Assuming independent and identically distributed (i.i.d.) Rayleigh flat-fading between antenna pairs and equal power allocation to each of the transmit antennas, the ergodic capacity of such channels is expressed in closed form as finite sums of the exponential integrals which are the special cases of the complementary incomplete gamma function. Using the asymptotic capacity rate of MIMO channels, which is defined as the asymptotic growth rate of the ergodic capacity, we also give simple approximate expressions for the MIMO capacity. Numerical results show that the approximations are quite accurate for the entire range of average signal-to-noise ratios.

We have shown that a photonic sensor can be used as an electric-field probe for planar near-field measurements of X-band antennas. Because an antenna on the photonic sensor is small (about 0.1 λ) compared to the wavelength, the photonic sensor can directly measure the amplitude and the phase of the electric field close (about 0.3 λ) to the apertures of antennas without disturbing the electric field to be measured. Therefore we can obtain the antenna pattern by transforming the measured electric field without probe compensation. To verify the merits of the photonic sensor, we have evaluated the antenna patterns of a standard gain horn antenna and a microstrip array antenna at 9.41 GHz. Comparing the results obtained using the photonic sensor with those obtained using the conventional open-ended waveguide probe and other methods, we have shown that the antenna patterns agree with each other within 1 dB over wide ranges of directivity.

We propose a new approach associated with the use of some selected sets of Walsh Hadamard codes for joint estimation of channels and the number of transmit antennas by employing only one OFDM pilot symbol. This allows transmit antenna diversity to be applied in systems which have a limited number of training symbols (preambles), e.g. HIPERLAN/2. The proposed approach does not require any a priori knowledge about the number of transmit antennas, providing flexibility in the number of antennas to be used. In addition, adaptive scheme associated with the proposed approach provides more accurate estimations of the channels. The effectiveness of the proposed approach is evaluated through simulation. Results show that the proposed scheme provides significant improvement over previous channel estimation schemes and has almost the same performance as the ideal system with the full knowledge of the channel state information.

Multiple antenna systems are promising architectures for overcoming the effects of multi-path interference and increasing the spectrum efficiency. In order to be able to investigate these systems, in this article, we derive generalized spatial correlation equations of a circular antenna array for two typical angular energy distributions: a Gaussian angle distribution and uniform angular distribution. The generalized spatial correlation equations are investigated carefully by exact and approximate analyses.

This paper describes the design, fabrication, and measurement of a multiple U-shaped slot antenna for Hiper-LAN. The prototype consists of a U-shaped slot and two inverted U-shaped slot. To obtain sufficient bandwidth, a foam layer is inserted between the ground plane and substrate. A measured bandwidth of approximately 7.6% (VSWR 1.5) and gain of 2.9-5.3 dBi are obtained. The experimental far-field patterns are shown to be stable across the pass band, with the 3 dB beam width in azimuth and elevation at 50and 62, respectively.

This paper examines the Inter Carrier Interference (ICI) due to Doppler spread in OFDM mobile reception and proposes the use of Beam-Space Adaptive Array Antennas for moving receivers. In the proposed system, firstly we separate the multi-path signals into multi-beams according to their incident directions, then correct the frequency shift of each beam signal, considering the beam direction, and finally combine the corrected signals based on Maximal Ratio Combining (MRC). Further this paper clarifies the excellent performance of the proposed system in suppressing the influence of Doppler spread by carrying out computer simulation. Particularly, it was certified that it is possible to suppress the influence of the Doppler spread efficiently for all the receiving directions by using eight-element beam-space array antenna with element spacing of (3/8)λ, and referring three past symbol data when calculating the weight vector of MRC.