Zikang CHEN Wenping GE Henghai FEI Haipeng ZHAO Bowen LI
The combination of multiple-input multiple-output (MIMO) technology and sparse code multiple access (SCMA) can significantly enhance the spectral efficiency of future wireless communication networks. However, the receiver design for downlink MIMO-SCMA systems faces challenges in developing multi-user detection (MUD) schemes that achieve both low latency and low bit error rate (BER). The separated detection scheme in the MIMO-SCMA system involves performing MIMO detection first to obtain estimated signals, followed by SCMA decoding. We propose an enhanced separated detection scheme based on lightweight graph neural networks (GNNs). In this scheme, we raise the concept of coordinate point relay and full-category training, which allow for the substitution of the conventional message passing algorithm (MPA) in SCMA decoding with image classification techniques based on deep learning (DL). The features of the images used for training encompass crucial information such as the amplitude and phase of estimated signals, as well as channel characteristics they have encountered. Furthermore, various types of images demonstrate distinct directional trends, contributing additional features that enhance the precision of classification by GNNs. Simulation results demonstrate that the enhanced separated detection scheme outperforms existing separated and joint detection schemes in terms of computational complexity, while having a better BER performance than the joint detection schemes at high Eb/N0 (energy per bit to noise power spectral density ratio) values.
Shiqing QIAN Wenping GE Yongxing ZHANG Pengju ZHANG
Sparse code division multiple access (SCMA) is a non-orthogonal multiple access (NOMA) technology that can improve frequency band utilization and allow many users to share quite a few resource elements (REs). This paper uses the modulation of lattice theory to develop a systematic construction procedure for the design of SCMA codebooks under Gaussian channel environments that can achieve near-optimal designs, especially for cases that consider large-scale SCMA parameters. However, under the condition of large-scale SCMA parameters, the mother constellation (MC) points will overlap, which can be solved by the method of the partial dimensions transformation (PDT). More importantly, we consider the upper bounded error probability of the signal transmission in the AWGN channels, and design a codeword allocation method to reduce the inter symbol interference (ISI) on the same RE. Simulation results show that under different codebook sizes and different overload rates, using two different message passing algorithms (MPA) to verify, the codebook proposed in this paper has a bit error rate (BER) significantly better than the reference codebooks, moreover the convergence time does not exceed that of the reference codebooks.
Jinkyu KANG Seongah JEONG Hoojin LEE
In this letter, we derive a novel and accurate closed-form bit error rate (BER) approximation of the optical wireless communications (OWC) systems for the sub-carrier intensity modulation (SIM) employing binary phase-shift keying (BPSK) with multiple transmit and single receive apertures over strong atmospheric turbulence channels, which makes it possible to effectively investigate and predict the BER performance for various system configurations. Furthermore, we also derive a concise asymptotic BER formula to quantitatively evaluate the asymptotically achievable error performance (i.e., asymptotic diversity and combining gains) in the high signal-to-noise (SNR) regimes. Some numerical results are provided to corroborate the accuracy and effectiveness of our theoretical expressions.
Seongah JEONG Jinkyu KANG Hoojin LEE
In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.
Yuan LIANG Xinyu DA Ruiyang XU Lei NI Dong ZHAI Yu PAN
We propose a novel bit error rate (BER) analysis model of weighted-type fractional Fourier transform (WFRFT)-based systems with WFRFT order offset Δα. By using the traditional BPSK BER analysis method, we deduce the equivalent signal noise ratio (SNR), model the interference in the channel as a Gaussian noise with non-zero mean, and provide a theoretical BER expression of the proposed system. Simulation results show that its theoretical BER performance well matches the empirical performance, which demonstrates that the theoretical BER analysis proposed in this paper is reliable.
Jinkyu KANG Seongah JEONG Hoojin LEE
In this letter, efficient closed-form formulas for the exact and asymptotic average bit error probability (ABEP) of space shift keying (SSK) systems are derived over Rayleigh fading channels with imperfect channel state information (CSI). Specifically, for a generic 2×NR multiple-input multiple-output (MIMO) system with the maximum likelihood (ML) detection, the impact of imperfect CSI is taken into consideration in terms of two types of channel estimation errors with the fixed variance and the variance as a function of the number of pilot symbols and signal-to-noise ratio (SNR). Then, the explicit evaluations of the bit error floor (BEF) and asymptotic SNR loss are carried out based on the derived asymptotic ABEP formula, which accounts for the impact of imperfect CSI on the SSK system. The numerical results are presented to validate the exactness of our theoretical analysis.
A comprehensive model is presented for estimating the bit error rate (BER) of write disturbance in a resistive memory composed of a cross-point array. While writing a datum into the selected address, the non-selected addresses are biased by word-line (WL) and bit-line (BL). The stored datum in the non-selected addresses will be disturbed if the bias is large enough. It is necessary for the current flowing through the non-selected address to be calculated in order to estimate the BER of the write disturbance. Since it takes a long time to calculate the current flowing in a large-scale cross-point array, several simplified circuits have been utilized to decrease the calculating time. However, these simplified circuits are available to the selected address, not to the non-selected one. In this paper, new simplified circuits are proposed for calculating the current flowing through the non-selected address. The proposed and the conventional simplified circuits are used, and on that basis the trade-off between the write disturbance and the write error is discussed. Furthermore, the error correcting code (ECC) is introduced to improve the trade-off and to provide the low-cost memory chip matching current production lines.
Sung Sik NAM Jeong Woo CHOI Sung Ho CHO
In this paper, a threshold-based I-Q diversity combining scheme for ultra-high frequency (UHF) radio frequency identification (RFID) readers with a quadrature receiver is proposed in the aspect of improving the tag detection performance. In addition, the performance of the proposed scheme is evaluated as the closed-form expressions. In particular, its statistical characteristics are detailed and its performance is compared to that of conventional schemes over independent and identically distributed Rician fading conditions in terms of average signal-to-noise ratio (SNR), bit error rate (BER), and the average number of required combining process. Numerical results indicate that the proposed scheme enables processing power control through threshold control while meeting the required quality of service compared to conventional schemes.
Ya-Ting SHYU Ying-Zu LIN Rong-Sing CHU Guan-Ying HUANG Soon-Jyh CHANG
Real-time on-chip measurement of bit error rate (BER) for high-speed analog-to-digital converters (ADCs) does not only require expensive multi-port high-speed data acquisition equipment but also enormous post-processing. This paper proposes a low-cost built-in-self-test (BIST) circuit for high-speed ADC BER test. Conventionally, the calculation of BER requires a high-speed adder. The presented method takes the advantages of Gray coding and only needs simple logic circuits for BER evaluation. The prototype of the BIST circuit is fabricated along with a 5-bit high-speed flash ADC in a 90-nm CMOS process. The active area is only 90 µm 70 µm and the average power consumption is around 0.3 mW at 700 MS/s. The measurement of the BIST circuit shows consistent results with the measurement by external data acquisition equipment.
Jingjing SHI Daisuke ANZAI Jianqing WANG
This paper aims at channel modeling and bit error rate (BER) performance improvement with diversity reception for in-body to on-body ultra wideband (UWB) communication for capsule endoscope application. The channel characteristics are firstly extracted from 3.4 to 4.8 GHz by using finite difference time domain (FDTD) simulations incorporated with an anatomical human body model, and then a two-path impulse response channel model is proposed. Based on the two-path channel model, a spatial diversity reception technique is applied to improve the communication performance. Since the received signal power at each receiver location follows a lognormal distribution after summing the two path components, we investigate two methods to approximate the lognormal sum distribution in the combined diversity channel. As a result, the method matching a short Gauss-Hermite approximation of the moment generating function (MGF) of the lognormal sum with that of a lognormal distribution exhibits high accuracy and flexibility. With the derived probability density function (PDF) for the combined diversity signals, the average BER performances for impulse-radio (IR) UWB with non-coherent detection are investigated to clarify the diversity effect by both theoretical analysis and computer simulation. The results realize an improvement around 10 dB on Eb/No at BER of 10-3 for two-branch diversity reception.
Shusuke YOSHIMOTO Takuro AMASHITA Shunsuke OKUMURA Koji NII Masahiko YOSHIMOTO Hiroshi KAWAGUCHI
This paper presents measurement results of bit error rate (BER) and soft error rate (SER) improvement on 150-nm FD-SOI 7T/14T (7-transistor/ 14-transistor) SRAM test chips. The reliability of the 7T/14T SRAM can be dynamically changed by a control signal depending on an operating condition and application. The 14T dependable mode allocates one bit in a 14T cell and improves the BER in a read operation and SER in a retention state, simultaneously. We investigate its error rate mitigating mechanisms using Synopsys TCAD simulator. In our measurements, the minimum operating voltage was improved by 100 mV, the alpha-induced SER was suppressed by 80.0%, and the neutron-induced SER was decreased by 34.4% in the 14T dependable mode over the 7T normal mode.
The impact of non-ideal delay line (DL) along with group delay ripple (GDR) on the performance of ultra wide bandwidth (UWB) system has not yet been studied in previous literatures. In this paper, according to the currently designed DLs, we propose a statistical GDR model to achieve a practical UWB DL, and investigate the degradation in average bit error rate (BER) caused by the GDR for the transmitted-reference (TR) UWB communication systems. According to the analysis results, an improved autocorrelation receiver (AcR) is proposed. Through Monte Carlo simulations, the great performance improvement of the proposed AcR is verified by comparing it with the conventional TR AcR under non-ideal DL conditions. The proposed receiver framework is simple enough to enable a tractable analysis, and provides valuable insights for designing a practical TR UWB AcR that experiences GDR.
Man FENG Lenan WU Jiajia DING Chenhao QI
The extended binary phase shift keying (EBPSK) transmission system with ultra narrow bandwidth has excellent BER performance, which raises many doubts with the researchers. Therefore, on the premise of the existence of a special filter that can transform the modulated phase information into amplitude information, the theoretical BER formula of EBPSK system in Additive White Gaussian Noise (AWGN) channel has been deduced. This paper gives the theoretical values of the parameters in the above BER formula and discusses the effects of parameters on BER firstly. Then the paper shows that the special impacting filter satisfies the above assumption, therefore, in the frame of binary detection theory, the excellent performance of high-efficiency EBPSK system can be explained and the correction of the theoretical BER formula can be validated.
Jianqing WANG Kenichiro MASAMI Qiong WANG
The objective of this study is to investigate the feasibility of an ultra wideband (UWB) impulse radio system for in-body to off-body wireless communication for biomedical applications. At first, a UWB antenna is designed in the UWB low band for implant use in the chest. Then the channel model is extracted and established based on the finite difference time domain (FDTD) simulation with an anatomical human body model. The established channel model consists of a small set of parameters for generating discrete time impulse responses. The generated model shows good agreement with the FDTD-calculated result in terms of key communication metrics. For effective communication over the multipath-affected channel, the pulse position modulation is employed and a 2-finger RAKE structure with a constant temporal delay is proposed in the receiver. The bit error rate performance has shown the validity of the system in the in-body to off-body chest channel.
Ultra wideband (UWB) on-body communication is attracting much attention in biomedical applications. In this paper, the performance of UWB on-body communication is investigated based on a statistically extracted on-body channel model, which provides detailed characteristics of the multi-path-affected channel with an emphasis on various body postures or body movement. The possible data rate, the possible communication distance, as well as the bit error rate (BER) performance are clarified via computer simulation. It is found that the conventional correlation receiver is incompetent in the multi-path-affected on-body channel, while the RAKE receiver outperforms the conventional correlation receiver at a cost of structure complexity. Different RAKE receiver structures are compared to show the improvement of the BER performance.
A coordinate plane representation of the resource requirements of digital modulation methods is presented, and an overall resource efficiency measure is proposed. This measure can be used for the comparison of digital modulation methods and the evaluation of an emerging modulation technique. Several typical digital modulation methods are compared based on this measure to show its validity.
Combining relaying and multi-input multi-output (MIMO) transmission is a generic way to overcome the channel-fading impairments. Best antenna selection is a simple but efficient MIMO method that achieves the full diversity and also serves as a lower bound reference of MIMO performance. For a dual-hop MIMO system with an ideal amplify-and-forward (AF) relaying gain and best antenna selection, we provide a probability density function (PDF) of received signal-to-noise ratio (SNR) and an analytic BER equation when using M-ary PSK in Rayleigh fading channels. The analytic result is shown to exactly match with simulated one. Furthermore, the effect of link unbalance between the first hop and the second hop, due to differences in the number of antennas deployed in both hops as well as in the average power of channel coefficients, on the BER performance is numerically investigated and the results show that the links with better balance give better performance.
Chin Sean SUM Shigenobu SASAKI Hisakazu KIKUCHI
This paper investigates the impact of chip duty factor (DF) in DS-UWB system with Rake receiver over AWGN and UWB indoor multipath environment corresponding to system parameters such as spreading bandwidth and chip length. Manipulating DF in DS-UWB system offers several advantages over multipath channel and thus, capable of improving system performance for better quality of communication. Although employing lower DF generally improves performance, in some exceptional cases on the other hand, degradation can be observed despite decreasing DF. Therefore, the objective of this paper is to clarify the relationship between DF and DS-UWB system performance. We discovered that with constant processing gain and spreading bandwidth, performance improvement can be observed at DF lower than 0.17. Additionally, with spreading bandwidth as tradeoff parameter, significant performance improvement can only be observed below DF of 0.85.
Tingting SHI Shidong ZHOU Yan Yao Ming ZHAO
This letter proposed a linear precoding scheme for the V-BLAST system that requires only knowledge of the statistical CSI; the transmitter does not need the instantaneous CSI. Power allocation on the eigenmodes of the transmit correlation matrix is one way to minimize bit error rate (BER). Simulation results show that the proposed precoding V-BLAST system provides a significant reduction in the BER compared with the conventional V-BLAST systems.
In this paper, the bit error rate (BER) and the outage probability are presented for a maximal ratio combining (MRC) two-dimensional (2D)-RAKE receiver operating in a correlated frequency-selective Nakagami-m fading environment with multiple access interference. A simple approximated probability distribution function of the signal-to-interference-plus-noise ratio (SINR) is derived for the receiver with multiple correlated antennas and RAKE branches in arbitrary fading environments. The combined effects of spatial and temporal diversity order, average received signal-to-noise ratio, the number of multiple access interference, angular spread, antennae spacing and multi-path Nakagami-m fading environment on the system performance are illustrated. Numerical results indicate that the performance of the 2D-RAKE receiver depends highly on the operating environment and antenna array configuration. The performance can be improved by increasing the spatio-temporal diversity gains and antenna spacing.