The search functionality is under construction.
The search functionality is under construction.

Keyword Search Result

[Keyword] carrier(500hit)

421-440hit(500hit)

  • A Maximum Likelihood Decision Based Nonlinear Distortion Compensator for Multi-Carrier Modulated Signals

    Minoru OKADA  Hideki NISHIJIMA  Shozo KOMAKI  

     
    PAPER-Radio Communication

      Vol:
    E81-B No:4
      Page(s):
    737-744

    This paper proposes a new nonlinear distortion compensation scheme for orthogonal multi-carrier modulation systems. Multi-carrier modulation is an effective technique for high speed digital transmission over time-dispersive channels, however, it is very sensitive to nonlinear distortion. The proposed scheme compensates for the performance degradation due to nonlinear distortion using the maximum likelihood (ML) detection criterion. While the ideal ML receiver requires a huge computational cost and is not feasible, the proposed decision algorithm can effectively reduce the computational cost. Instead of evaluating the likelihood function for all the possible sequences, the proposed scheme examines the sequences which differ by only one bit from the sequence decoded by the conventional receiver. Computer simulation results show that the proposed scheme can effectively compensate for the nonlinear distortion.

  • Direct Sequence Code Division Multiple Access With Optical Multicarriers and Parallel FEC Codes

    Raziq Pervez YAQUB  Masao NAKAGAWA  

     
    PAPER-Mobile Communication

      Vol:
    E81-B No:4
      Page(s):
    785-797

    We propose Direct Sequence CDMA with Optical Multicarriers and Parallel Forward Error Correcting (PFEC) coding technique. Proposed DS-CDMA with OPTICAL MULTICARRIERS, is new in lightwave systems and its alliance with PARALLEL FEC codes, makes it further unique. Optical multicarriers approach is effective to increase throughput by combating dispersion and ISI (Intersymbol Interference), whereas FEC is effective to increase reliability by diluting interactions among optical multicarriers. Till now, both the techniques in lightwave systems have been discouraged. The former because of the wandering effect of optical multicarriers owing to unstability of laser diodes and later because it involves insertion of parity bits that changes data rate and results in insertion distortion that is not desirable in optical systems. To avoid change due to spreading code we also propose to take spreading code equal to serial to parallel converted streams. It bounds initial data (before S/P conversion) to data per carrier (after S/P conversion and spreading) on one hand and relaxes the requirement of high speed electronics on the other. The alliance of optical multicarriers with suitably applied FEC that we refer as Parallel FEC (PFEC) is effective as the beneficial aspects of each mitigate the shortcomings of the other and make the system practicable. Theoretical treatment confirms that the proposed approach is fundamentally sound and holds the potential for promising network performance.

  • Application of Circuit-Level Hot-Carrier Reliability Simulation to Memory Design

    Peter M. LEE  Tsuyoshi SEO  Kiyoshi ISE  Atsushi HIRAISHI  Osamu NAGASHIMA  Shoji YOSHIDA  

     
    PAPER-Electronic Circuits

      Vol:
    E81-C No:4
      Page(s):
    595-601

    We have applied hot-carrier circuit-level simulation to memory peripheral circuits of a few thousand to over 12K transistors using a simple but accurate degradation model for reliability verification of actual memory products. By applying simulation to entire circuits, it was found that the location of maximum degradation depended greatly upon circuit configuration and device technology. A design curve has been developed to quickly relate device-level DC lifetime to circuit-level performance lifetime. Using these results in conjunction with a methodology that has been developed to predict hot-carrier degradation early in the design cycle before TEG fabrication, accurate total-circuit simulation is applied early in the design process, making reliability simulation a crucial design tool rather than a verification tool as technology advances into the deep sub-micron high clock rate regime.

  • Intermodulation Compensation Using Code Reversal Technique for Orthogonal Multi-Carrier Modulation

    Atsuo HORIBE  Masao NAKAGAWA  

     
    PAPER-Mobile Communication

      Vol:
    E81-B No:1
      Page(s):
    96-103

    Since an orthogonal multi-carrier signal has large peak power, intermodulation distortion occurs due to the non-linearity of the power amplifier. This distortion severely deteriorates the performance of the multi-carrier system. Especially when carriers are modulated by information bits which produce the same phase shift or the alternative phase shift, the modulated signal has maximum peak power at the input of the amplifier. In order to avoid these phase shifts (code sequences), we propose a code reversal technique which suppresses the maximum peak power of multi-carrier signals for intermodulation compensation. This method utilizes the reversal codes which are added to the original information bits. We also show the effectiveness of the code reversal technique combined with error correction coding and examine the optimum operating point of the amplifier.

  • Orthogonalization Using Multicarrier Pre-Decorrelation in a Multipath Fading Channel

    Hideyuki MATSUTANI  Yukitoshi SANADA  Masao NAKAGAWA  

     
    PAPER

      Vol:
    E80-A No:12
      Page(s):
    2470-2476

    Pre-decorrelation is a method of achieving orthogonalization between multiple signals on the forward link. This technique can achieve orthogonalization in a flat fading channel, however, the orthogonality does not clearly appear in a multipath fading channel because of interchip interference. In order to eliminate the effect of multipath and prevent interchip interference, multicarrier modulation can be employed. In this paper we propose a multicarrier pre-decorrelation technique which combines multicarrier modulation with pre-decorrelation. Computer simulation results show that the proposed technique can achieve orthogonalization in a multipath fading channel.

  • Carrier Frequency Offset-Spread Spectrum (CFO-SS) Method for Wireless LAN System Using 2.4 GHz ISM Band

    Hiroyasu ISHIKAWA  Hideyuki SHINONAGA  Hideo KOBAYASHI  

     
    PAPER

      Vol:
    E80-A No:12
      Page(s):
    2366-2371

    A wireless communications system with a transmission rate of 10 Mbit/s using Japanese ISM band (2471-2497 MHz) is presented. This system employs a novel spread spectrum multiple access method named "CFO-SS (Carrier Frequency Offset-Spread Spectrum)" method. In the CFO-SS system, a single PN code is commonly assigned to all the multiple carriers, and the frequency offset between the carriers is determined by the information symbol rate, which is small as compared with the spread bandwidth of the signal. Bit error rate performance of the proposed CFO-SS system under multipath environments is investigated by computer simulation, and the performance of the CFO-SS method is confirmed for wireless LAN systems using the 2.4 GHz ISM band.

  • Optimization of Transmitter and Receiver Filters for OQAM-OFDM Systems Using Nonlinear Programming

    Hsiao-Hwa CHEN  Xiao-Dong CAI  

     
    PAPER-Communication Theory

      Vol:
    E80-B No:11
      Page(s):
    1680-1687

    This paper proposes a family of optimized transmitter and receiver FIR filters for orthogonal frequency division multiplex (OFDM) systems with offset QAM modulation using nonlinear-programming. Two objective functions in the frequency domain (considering both OFDM orthogonal condition and Nyquist condition), least square error (LSE) and minimizing maximal spectral side lobe (Mini-max), are used. The nonlinear programming is implemented with a modified sequential quadratic programming (SQP) algorithm, which guarantees a super-linear convergence. Resultant optimized FIR filters are given with their coefficients and spectra.

  • Block Coding Scheme Based on Complementary Sequences for Multicarrier Signals

    Hideki OCHIAI  Hideki IMAI  

     
    PAPER-Communications/Coded Modulation/Spread Spectrum

      Vol:
    E80-A No:11
      Page(s):
    2136-2143

    A novel block coding scheme based on complementary sequences which is capable of both error correction and peak to average power ratio reduction has been proposed for M-ary PSK multicarrier systems. Generator matrices for the number of carriers N = 2k where k = 2,3,...are derived. The effectiveness of the scheme has been confirmed by computer simulations.

  • A Simple Synchronization Acquisition Method for DS/SS System under Carrier Frequency Offset

    Nozomu NISHINAGA  Masato NAKAGAMI  Yoshihiro IWADARE  

     
    PAPER-Communications/Coded Modulation/Spread Spectrum

      Vol:
    E80-A No:11
      Page(s):
    2162-2171

    Recently, the low earth orbit satellite communications has been attracting much attention. These communications have many strong features, however, the communication performances are influenced by carrier frequency offset (CFO) and, particularly, it is hard to acquire the synchronization. A large number of publications have so far been made on the synchronization acquisition of DS/SS systems under CFO and most of them make use of the maximum likelihood decision in finding the maximum values of Fourier transform outputs. However, the implementations of Fourier transforms usually require high cost and large space. In this paper, we propose a new simple acquisition scheme using half-symbol differential decoding technique for DS/SS systems under CFO. This scheme makes use of the addition and subtraction of baseband signals and their delayed versions, (omitting Fourier transforms), together with integrations by recursive integrators, and thus resulting in much simpler implementation. In general, it is shown that the proposed scheme can acquire the code synchronization under carrier frequency offset with much smaller computational complexities and the sacrifice of longer acquisition time.

  • An Initial Acquisition Method for M-Ary Spread-Spectrum Signals Using Hadamard Code Sequences

    Tadahiro WADA  Takaya YAMAZATO  Masaaki KATAYAMA  Akira OGAWA  

     
    PAPER-Communications/Coded Modulation/Spread Spectrum

      Vol:
    E80-A No:11
      Page(s):
    2172-2179

    In this paper, we examine a new initial symbol acquisition method for M-ary spread-spectrum (M-ary/SS) signals that are affected by large carrier frequency offset. By the effect of the carrier frequency offset, preamble signal energy is dispersed to the undersired outputs. The proposed method is based on the collection of such dispersed signal energies by using reference patterns. The reference patterns are constructed by using the characteristic of Hadamard code sequences. The effectiveness of the proposed method is evaluated in terms of mean acquisition time.

  • New DQPSK Simultaneous Carrier and Bit-Timing Recovery Coherent Demodulator for Wireless Broadband Communication Systems

    Yoichi MATSUMOTO  Takeyuki NAGURA  Masahiro UMEHIRA  

     
    PAPER

      Vol:
    E80-B No:8
      Page(s):
    1145-1152

    This paper proposes a differentially-coded-quadrature-phase-shift-keying (DQPSK) coherent demodulator using a new simultaneous carrier and bit-timing recovery scheme (SCBR). The new DQPSK SCBR (DSCBR) scheme works with a frequently used preamble, whose baseband signal alternates between two diagonal decision points, for example, a repeated bit-series of "1001." With the DSCBR scheme, the proposed demodulator achieves a significantly agile carrier and bit-timing recovery using an open-loop approach with a one-part preamble. To illustrate this, a preamble of 8 symbols is applicable with the Eb/No degradation from the theory over AWGN of 0.2 dB. It is also shown that the proposed demodulator achieves an improvement in the required Eb/No of more than 2 dB over differential detection over Ricean fading communication channels. The channels are modeled for wireless broadband communication systems with directional antennas or line of sight (LOS) paths. This paper concludes that the proposed demodulator is a strong candidate for receivers in wireles broadband communication systems.

  • Model for Thermal Noise in Semiconductor Bipolar Transistors at Low-Current Operation as Multidimensional Diffusion Stochastic Process

    Yevgeny V.MAMONTOV  Magnus WILLANDER  

     
    PAPER-Electronic Circuits

      Vol:
    E80-C No:7
      Page(s):
    1025-1042

    This work presents a further development of the approach to modelling thermal (i.e. carrier-velocity-fluctuation) noise in semiconductor devices proposed in papers by the present authors. The basic idea of the approach is to apply classical theory of Ito's stochastic differential equations (SDEs) and stochastic diffusion processes to describe noise in devices and circuits. This innovative combination enables to form consistent mathematical basis of the noise research and involve a great variety of results and methods of the well-known mathematical theory in device/circuit design. The above combination also makes our approach completely different, on the one hand, from standard engineering formulae which are not associated with any consistent mathematical modelling and, on the other hand, from the treatments in theoretical physics which are not aimed at device/circuit models and design. (Both these directions are discussed in more detail in Sect. 1). The present work considers the bipolar transistor compact model derived in Ref. [2] according to theory of Ito's SDEs and stochastic diffusion processes (including celebrated Kolmogorov's equations). It is shown that the compact model is transformed into the Ito SDE system. An iterative method to determine noisy currents as entries of the stationary stochastic process corresponding to the above Ito system is proposed.

  • Design and Performance of a New OQPSK Coherent Demodulator Using an Advanced Simultaneous Carrier and Bit-Timing Recovery SchemeApplication to Wireless ATM Systems

    Yoichi MATSUMOTO  Masahiro UMEHIRA  

     
    PAPER

      Vol:
    E80-A No:7
      Page(s):
    1175-1182

    This paper presents a new offset-quadrature-phase-shift-keying (OQPSK) coherent demodulation scheme for wireless asynchronous transfer mode (WATM) systems that premise the Ricean fading communication channels (e.g., typically with derectional antennas). The presented demodulator is basically advanced from a simultaneous carrier and bit-timing recovery (SCBR) scheme by newly employing a phase compensated filter and a reverse-modulation scheme for OQPSK. This advancement aims to enhance the carrier phase tracking performance against the phase fluctuation due to the fading and/or the phase rotation caused by the carrier frequency error of the oscillator. Design consideration and performance evaluation of the demodulator are extensively carried out under Ricean fading channels typical of the WATM systems as well as additive white Gaussian noise (AWGN) channels. The evaluation ressults show that the advanced SCBR (ASCBR) scheme achieves a bit-error-rate/cell-error-rate (BER/CER) performance close to ideal coherent detection with a considerably short preamble, e.g., 8 symbols. Specifically, compared with differential detection (evaluated for QPSK with the hard-wired clock), the new coherent demodulator achieves a significant required Eb/No improvement, which becomes larger as the fading condition degrades. This paper concludes that the ASCBR scheme is a strong candidate for the Ricean-fading-premise WATM systems.

  • Bit Error Rate Evaluation of Delay Time Control Scheme for Reverse Channel on Orthogonal Coding Multi-Carrier CDMA

    Souichi WATANABE  Takuro SATO  Masakazu SENGOKU  Takeo ABE  

     
    PAPER

      Vol:
    E80-A No:7
      Page(s):
    1226-1232

    This paper describes a delay control scheme for synchronous detection of an orthogonal coding multi-carrier CDMA (Code Division Multiple Access) system. The delay control scheme estimates transmission timing of data from each mobile station. At a base station, delay time is obtained by detecting phase shift value of the preamble signal from each mobile station. The estimated transmission timing information is sent from base station to each mobile station and the mobile station then adjusts its transmission timing. Simulation results clarified that Bit Error Rate (BER) is 2.510-3 at 19dB of Eb/No under conditions of 29.4 msec initial delay time, 32kbit/sec data rate, 16 subchannels and 100Hz of fading frequency.

  • Phase Jitter of Carrier Recovery Using Fourth-Power Multiplier for QPSK and QAM Transmission

    Kazuhiro MIYAUCHI  Takahiro NAGAI  Masataka KATO  Shigeo OHUE  

     
    PAPER-Radio Communication

      Vol:
    E80-B No:5
      Page(s):
    755-762

    In bandlimited QPSK and QAM transmission systems, phase jitter occurs in the output of a carrier recovery circuit that uses a fourth-power multiplier. To analyze the phase jitter, an exact expression was derived for the autocorrelation function and power spectral density for the case in which bandlimited Gaussian noise and a QPSK or QAM signal with random modulation and arbitrary waveform are simultaneously applied to the fourth-power multiplier. Using this expression, the rms phase jitter of the recovered carrier in root-cosine-rolloff transmission systems for QPSK, 16QAM, 64QAM and 256QAM was calculated. It was shown that the conventional theories for rectangular waveforms are special cases of our theory.

  • Partial Capture Effect for Multi-Carrier Radio Packet Communication Network

    Hiroyuki ATARASHI  Masao NAKAGAWA  

     
    PAPER-Radio Communication

      Vol:
    E80-B No:2
      Page(s):
    372-378

    Partial capture effect for multi-carrier radio packet communication network is evaluated in frequency selective fading channel. In multi-carrier modulation (MCM) network where each terminal uses several sub-carriers for transmission,the terminals have different instantaneous frequency responses because of its location, fading pattern, and other various factors. This generates the difference of received power in frequency domain, then partial capture effect can be considered at each sub-carrier. Moreover these partially captured packets are not damaged by inter symbol interference (ISI) caused by frequency selective fading, which seriously degrades single-carrier modulation (SCM) network. From this point of view we present the partial capture effect for the MCM network in the frequency selective fading environment. The results show that the MCM network with partial capture has more advantages than the MCM network without partial capture in terms of the throughput and the average number of transmissions.

  • Offset QPSK Simultaneous Carrier and Bit-Timing Recovery SchemeAgile Acquisition over Satellite Communication Channels

    Yoichi MATSUMOTO  

     
    PAPER-Modem and Coding

      Vol:
    E80-B No:1
      Page(s):
    16-24

    This paper proposes a new simultaneous carrier and bit-timing recovery (CBR) scheme for offset quadrature phase shift keying (O-QPSK) for agile acquisition over satellite communication channels. The proposed simultaneous CBR scheme employs a preamble shared for the carrier and bit-timing recover, which has a specific bit-pattern designed so that its baseband signal alternates between two adjacent decision points at the symbol rate. Using the preamble, the proposed simultaneous CBR scheme estimates the carrier phase and the bit-timing, simultaneously and independently, by open-loop approach. For comparison, this paper also describes the performance and configuration of a joint carrier and bit-timing recovery scheme, which is expanded for O-QPSK from the one conventionally proposed for QPSK. This paper demonstrates with simulation results that the proposed simultaneous CBR scheme significantly improves the agility of acquisition: a mere 30-symbol preamble is sufficient for low-Eb/No channels typical of satellite communication systems. The proposed CBR scheme is also advantageous from the viewpoint of digital implementation: it processes at 2 samples/symbol and eliminates an analog voltage control clock (VCC). The proposed simultaneous CBR scheme is a strong candidate for TDMA systems that require the high data-transmission and frequency utilization efficiency.

  • Performance of GaAs MESFET Photodetectors with Wide Drain-to-Gate Distances in Subcarrier Optical Transmission

    Tatsuya SHIMIZU  Masashi NAKATSUGAWA  Hiroyuki OHTSUKA  

     
    PAPER-Opto-Electronics

      Vol:
    E80-C No:1
      Page(s):
    160-167

    This paper presents the performance of a proposed GaAs MESFET photodetector with wide drain-to-gate distances for improving the optical coupling efficiency in subcarrier optical transmission. Principle and design parameters of the proposed MESFET are described. Link gain, CNR, and BER, are experimentally investigated as functions of the drain-to-gate distance. It is experimentally found that the proposed MESFET improves the link gain by 8.5 dB compared to the conventional structure at the subcarrier frequency of 140 MHz. Discussions are also included compared to PIN-PD.

  • Recent Advance of Millimeter Wave Technology in Japan

    Tsukasa YONEYAMA  Kazuhiko HONJO  

     
    INVITED PAPER

      Vol:
    E79-B No:12
      Page(s):
    1729-1740

    In order to highlight a rapid progress attained in the field of millimeter waves in Japan, this paper describes several key topics including transistors, integrated circuits, planar antennas, millimeter wave photonics, and others.

  • Parallel Coded Optical Multicarrier Frequency Division Multiplexing-;A Potential Step towards High Speed, High Capacity and High Reliability in Optical Transmission Systems

    RAZIO Pervez  Masao NAKAGAWA  

     
    PAPER-Optical Communication

      Vol:
    E79-B No:11
      Page(s):
    1677-1687

    Optical Frequency Division Multiplexing (OFDM) is an attractive multiplexing approach for exploiting optical communication technology. Although considerable progress has been made in this approach, it still suffers from numerous potential impairments, stemming from several phenomena. (i.e., laser unstability, residual temperature variations, linear and nonlinear cross talk.). Conventional serial coding technique is not practical in lightwave systems, as it changes the system's bit rate that is not desirable. In this paper a new Parallel Coded Optical Multicarrier Frequency Division Multiplexing (PCOM-FDM) technique has been investigated. The strategy of multicarriers, together with Parallel Forward Error Control (PFEC) coding, is a potentially novel approach as in this approach we have, 1) Investigated optical multicarrier communication that is effective in combating dispersion and increasing throughput, 2) Proposed PFEC coding which is different from conventional serial coding in respect that it does not change the system bit rate per carrier and prevents the effects of channel wandering. It is highly desirable in lightwave systems and thus holds a vital importance in practical high speed optical communication systems. Theoretical treatment shows that the proposed approach is promising and practical.

421-440hit(500hit)