Nowadays the computing technology is going through a major paradigm shift. Local processing platforms are being replaced by physically out of reach yet more powerful and scalable environments such as the cloud computing platforms. Previously, we introduced the OJIT system as a novel approach for obfuscating remotely executed programs, making them difficult for adversaries to reverse-engineer. The system exploited the JIT compilation technology to randomly and dynamically transform the code, making it constantly changing, thereby complicating the execution state. This work aims to propose the new design iOJIT, as an enhanced approach that patches the old systems shortcomings, and potentially provides more effective obfuscation. Here, we present an analytic study of the obfuscation techniques on the generated code and the cost of applying such transformations in terms of execution time and performance overhead. Based upon this profiling study, we implemented a new algorithm to choose which obfuscation techniques would be better chosen for “efficient” obfuscation according to our metrics, i.e., less prone to security attacks. Another goal was to study the system performance with different applications. Therefore, we applied our system on a cloud platform running different standard benchmarks from SPEC suite.

This paper proposes an enhanced BLE scanner with user-level channel awareness and simultaneous channel scanning to increase theoretical scanning capability by up to three times. With better scanning capability, channel analysis quality also has been improved by considering channel-specific signal characteristics, without the need of beacon-side changes.

In this paper, we analyze the impact of channel estimation errors in an amplify-and-forward (AF)-based two-way relaying network (TWRN) where adaptive modulation (AM) is employed in individual relaying path. In particular, the performance degradation caused by channel estimation error is investigated over Nakagami-m fading channels. We first derive an end-to-end signal-to-noise ratio (SNR), a cumulative distribution function, and a probability density function in the presence of channel estimation error for the AF-based TWRN with adaptive modulation (TWRN-AM). By utilizing the derived SNR statistics, we present accurate expressions of the average spectral efficiency and bit error rates with an outage-constraint in which transmission does not take place during outage events of bidirectional communications. Based on our derived analytical results, an optimal power allocation scheme for TWRN-AM is proposed to improve the average spectral efficiency by minimizing system outages.

Massive multiple-input multiple-output (MIMO) systems are a key promising technology for future broadband cellular networks. The propagation paths within massive MIMO radio channels are often sparse, both in the sub-6GHz frequency band and at millimeter wave frequencies. Herein, we propose a two-layer beamforming scheme for downlink transmission over massive multiuser MIMO sparse beam-space channels. The first layer employs a bipartite graph to dynamically group users in the beam-space domain; the aim is to minimize inter-user interference while significantly reducing the effective channel dimensionality. The second layer performs baseband linear MIMO precoding to maximize spatial multiplexing gain and system throughput. Simulation results demonstrate the proposed two-layer beamforming scheme outperforms other, more conventional algorithms.

With the rising importance of information security, the necessity of implementing better security measures in the physical layer as well as the upper layers is becoming increasing apparent. Given the development of more accurate and less expensive measurement devices, high-performance computers, and larger storage devices, the threat of advanced attacks at the physical level has expanded from the military and governmental spheres to commercial products. In this paper, we review the issue of information security degradation through electromagnetic (EM)-based compromising of security measures in the physical layer (i.e., EM information security). Owing to the invisibility of EM radiation, such attacks can be serious threats. We first introduce the mechanism of information leakage through EM radiation and interference and then present possible countermeasures. Finally, we explain the latest research and standardization trends related to EM information security.

This paper proposes a novel dynamic channel assignment scheme named interference-aware dynamic channel assignment (IA-DCA) for the downlink of enterprise small-cell networks (ESNs) that employ orthogonal frequency division multiple access (OFDMA) and frequency division duplexing (FDD). In ESNs, a lot of small-cell access points (SAPs) are densely deployed in a building and thus small-cell user equipments (SUEs) have more serious co-tier interference from neighbor SAPs than the conventional small-cell network. Therefore, in the proposed IA-DCA scheme, a local gateway (LGW) dynamically assigns different numbers of subchannel groups to SUEs through their serving SAPs according to the given traffic load and interference information. Through simulation results, we show that the proposed IA-DCA scheme outperforms other dynamic channel assignment schemes based on graph coloring algorithm in terms of the mean SUE capacity, fairness, and mean SAP channel utilization.

Bit-interleaved coded modulation with iterative decoding (BICM-ID) is suitable for correlated Rayleigh fading channels. Additionally, BICM-ID using differential encoding can avoid the pilot overhead. In this paper, we consider BICM-ID using 16-DAPSK (differential amplitude and phase-shift keying). We first derive the probability of receiving signals conditioned on the transmission of input bits for general differential encoding; then we propose two new 16-DAPSK bit labeling methods. In addition, convolutional codes for the new bit labeling are developed. Both the minimum distance and the simulation results show that the proposed labeling has better error performance than that of the original differential encoding, and the searched new codes can further improve the error performance.

In 1973, Arimoto proved the strong converse theorem for the discrete memoryless channels stating that when transmission rate R is above channel capacity C, the error probability of decoding goes to one as the block length n of code word tends to infinity. He proved the theorem by deriving the exponent function of error probability of correct decoding that is positive if and only if R > C. Subsequently, in 1979, Dueck and Körner determined the optimal exponent of correct decoding. Recently the author determined the optimal exponent on the correct probability of decoding have the form similar to that of Dueck and Körner determined. In this paper we give a rigorous proof of the equivalence of the above exponet function of Dueck and Körner to a exponent function which can be regarded as an extention of Arimoto's bound to the case with the cost constraint on the channel input.

Compressed Sensing (CS) is known to provide better channel estimation performance than the Least Square (LS) method for channel estimation. However, multipath delays may not be resolved if they span between the grids. This grid problem of CS is an obstacle to super resolution channel estimation. An Atomic Norm (AN) minimization is one of the methods for estimating continuous parameters. The AN minimization can successfully recover a spectrally sparse signal from a few time-domain samples even though the dictionary is continuous. There are studies showing that the AN minimization method has better resolution than conventional CS methods. In this paper, we propose a channel estimation method based on the AN minimization for Spread Spectrum (SS) systems. The accuracy of the proposed channel estimation is compared with the conventional LS method and Dantzig Selector (DS) of the CS. In addition to the application of channel estimation in wireless communication, we also show that the AN minimization can be applied to Global Positioning System (GPS) using Gold sequence.

This paper considers a joint channel coding and random number generation from the channel output. Specifically, we want to transmit a message to a receiver reliably and at the same time the receiver extracts pure random bits independent of the channel input. We call this problem as the joint channel coding and intrinsic randomness problem. For general channels, we clarify the trade-off between the coding rate and the random bit rate extracted from the channel output by using the achievable rate region, where both the probability of decoding error and the approximation error of random bits asymptotically vanish. We also reveal the achievable rate regions for stationary memoryless channels, additive channels, symmetric channels, and mixed channels.

The 1-bit digital radio frequency (DRF) transmitter using a band-pass delta-sigma modulator (BP-DSM) can output a radio frequency (RF) signal carrying a binary data stream with a constant data rate regardless of the carrier frequency, which makes it possible to transmit RF signals over digital optical links with a constant bit rate. However, the optical link requires a line coding, such as 8B10B or 64B66B, to constrain runlength and disparity, and the line coding corrupts the DRF power spectrum owing to additional or encoded data. This paper proposes a new line coding for BP-DSM, which is able to control the runlength and the disparity of the 1-bit data stream by adding a notch filter to the BP-DSM that suppresses the low frequency components. The notch filter stimulates the data change and balances the direct current (DC) components. It is demonstrated that the proposed line coding shortens the runlength from 50 bits to less than 8 bits and reduces the disparity from several thousand bits to 5 bits when the 1-bit DRF transmitter outputs an LTE signal with 5 MHz bandwidth, when using carrier frequencies from 0.5GHz to 2GHz and an output power variation of 60dB.

By exploiting the inherent sparsity of wireless channels, the channel estimation in an orthogonal frequency division multiplexing (OFDM) system can be cast as a compressed sensing (CS) problem to estimate the channel more accurately. Practically, matching pursuit algorithms such as orthogonal matching pursuit (OMP) are used, where path delays of the channel is guessed based on correlation values for every quantized delay with residual. This full search approach requires a predefined grid of delays with high resolution, which induces the high computational complexity because correlation values with residual at a huge number of grid points should be calculated. Meanwhile, the correlation values with high resolution can be obtained by interpolation between the correlation values at a low resolution grid. Also, the interpolation can be implemented with a low pass filter (LPF). By using this fact, in this paper we substantially reduce the computational complexity to calculate the correlation values in channel estimation using CS.

A b-symbol read channel is a channel model in which b consecutive symbols are read at once. As special cases, it includes a symbol-pair read channel (b=2) and an ordinary channel (b=1). The sphere packing bound, the Gilbert-Varshamov (G-V) bound, and the asymptotic G-V bound for symbol-pair read channels are known for b=1 and 2. In this paper, we derive these three bounds for b-symbol read channels with b≥1. From analysis of the proposed G-V bound, it is confirmed that the achievable rate is higher for b-symbol read channels compared with those for ordinary channels based on the Hamming metric. Furthermore, it is shown that the optimal value of b that maximizes the asymptotic G-V bound is finitely determined depending on the fractional minimum distance.

When trying to estimate time-varying multipath channels by applying a basis expansion model (BEM) in orthogonal frequency division multiplexing (OFDM) systems, pilot clusters are contaminated by inter-carrier interference (ICI). The pilot cluster ICI (PC-ICI) degrades the estimation accuracy of BEM coefficients, which degrades system performance. In this paper, a PC-ICI suppression scheme is proposed, in which two coded symbols defined as weighted sums of data symbols are inserted on both sides of each pilot cluster. Under the assumption that the channel has Flat Doppler spectrum, the optimized weight coefficients are obtained by an alternating iterative optimization algorithm, so that the sum of the PC-ICI generated by the encoded symbols and the data symbols is minimized. By approximating the optimized weight coefficients, they are independent of the channel tap power. Furthermore, it is verified that the proposed scheme is robust to the estimation error of the normalized Doppler frequency offset and can be applied to channels with other types of Doppler spectra. Numerical simulation results show that, compared with the conventional schemes, the proposed scheme achieves significant improvements in the performance of PC-ICI suppression, channel estimation and system bit-error-ratio (BER).

Digitization of analog terrestrial TV broadcasting has recently been accelerated in many countries, and the effective utilization of vacant frequencies has also been investigated for new systems in each country. In Japan, a portion of vacant frequencies in the VHF-high band was allocated to the public broadband mobile communication (PBB) system. To evaluate the current PBB system and develop future broadband communication systems in this band, it is important to analyze the propagation channel more accurately. In this study, we characterize the propagation channel for 200MHz band broadband mobile communication systems, using measured channel impulse responses (CIRs). In the characterization process, the Saleh-Valenzuela (S-V) model is utilized to extract channel model parameters statistically. When evaluating the fluctuation of path power gain, we also propose to model the fluctuation of path power gain using the generalized extreme value distribution instead of the conventional log-normal distribution. The extracted CIR model parameters are validated by cumulative distribution function of root-means-square delay spread and maximum excess delay, comparing simulation result to measurement result. From the extracted CIR model parameters, we clarified the characteristics of 200MHz band broadband mobile communication systems in non-line-of-sight environments based on S-V model with the proposed channel model.

This letter proposes a novel dynamic channel assignment (DCA) scheme with consideration of interference and fairness for the downlink of dense small-cell networks based on orthogonal frequency division multiple access-frequency division duplex. In the proposed scheme, a small-cell gateway fairly assigns subchannels to the small-cell user equipment (SUE) according to the co-tier interference from neighboring small-cell access points. From the simulation results, it is shown that the proposed DCA scheme outperforms other DCA schemes in terms of the fairness of each SUE capacity.

This paper mainly discusses the time-difference-of-arrival (TDOA) estimation problem of digital modulation signal under impulsive noise and cochannel interference environment. Since the conventional TDOA estimation algorithms based on the second-order cyclic statistics degenerate severely in impulsive noise and the TDOA estimation algorithms based on correntropy are out of work in cochannel interference, a novel signal-selective algorithm based on the generalized cyclic correntropy is proposed, which can suppress both impulsive noise and cochannel interference. Theoretical derivation and simulation results demonstrate the effectiveness and robustness of the proposed algorithm.

Both spatial diversity and multihop relaying are considered to be effective methods for mitigating the impact of atmospheric turbulence-induced fading on the performance of free-space optical (FSO) systems. Multihop relaying can significantly reduce the impact of fading by relaying the information over a number of shorter hops. However, it is not feasible or economical to deploy relays in many practical scenarios. Spatial diversity could substantially reduce the fading variance by introducing additional degrees of freedom in the spatial domain. Nevertheless, its superiority is diminished when the fading sub-channels are correlated. In this paper, our aim is to study the fundamental performance limits of spatial diversity suffering from correlated Gamma-Gamma (G-G) fading channels in multihop coherent FSO systems. For the performance analysis, we propose to approximate the sum of correlated G-G random variables (RVs) as a G-G RV, which is then verified by the Kolmogorov-Smirnov (KS) goodness-of-fit statistical test. Performance metrics, including the outage probability and the ergodic capacity, are newly derived in closed-form expressions and thoroughly investigated. Monte-Carlo (M-C) simulations are also performed to validate the analytical results.

In this letter, we explored the usage of spatio-temporal information in one unified framework to improve the performance of multichannel speech recognition. Generalized cross correlation (GCC) is served as spatial feature compensation, and an attention mechanism across time is embedded within long short-term memory (LSTM) neural networks. Experiments on the AMI meeting corpus show that the proposed method provides a 8.2% relative improvement in word error rate (WER) over the model trained directly on the concatenation of multiple microphone outputs.

This paper introduces a formation method for 3-dimensional 6 ch.×6 ch. shuffling structures with graded-index (GI) circular core in a multimode polymer optical waveguide for optical printed circuit boards (OPCBs) using a unique photomask-free fabrication technique named the Mosquito method. The interchannel pitch of the fabricated waveguides is 250µm, where all the channels consist of both horizontal and vertical bending structures and the last 6 channels in parallel cross over the first 6 channels. We also report 3-dimensional S-shaped polymer waveguides. In the S-shaped waveguides, the first and last 6 channels with both horizontal and vertical core bending composing the above 3-dimensional shuffling waveguide are separated, in order to evaluate the effect of over-crossing on the loss. It is experimentally confirmed that there is no excess insertion loss due to the shuffling structure in the 3-D shuffling waveguide. The evaluated crosstalk of the 3-D shuffling waveguide is lower than -30dB. The 3-D shuffling waveguide proposed in this paper will be a promising component to achieve high bandwidth density wiring for on-board optical interconnects.