Since the dark channel prior (DCP)-based dehazing method is ineffective in the sky area and will cause the problem of too dark and color distortion of the image, we propose a novel dehazing method based on sky area segmentation and image fusion. We first segment the image according to the characteristics of the sky area and non-sky area of the image, then estimate the atmospheric light and transmission map according to the DCP and correct them, and then fuse the original image after the contrast adaptive histogram equalization to improve the details information of the image. Experiments illustrate that our method performs well in dehazing and can reduce image distortion.

Underwater acoustic channels (UWA) are usually sparse, which can be exploited for adaptive equalization to improve the system performance. For the shallow UWA channels, based on the proportional minimum symbol error rate (PMSER) criterion, the adaptive equalization framework requires the sparsity selection. Since the sparsity of the L0 norm is stronger than that of the L1, we choose it to achieve better convergence. However, because the L0 norm leads to NP-hard problems, it is difficult to find an efficient solution. In order to solve this problem, we choose the Gaussian function to approximate the L0 norm. Simulation results show that the proposed scheme obtains better performance than the L1 based counterpart.

To obtain a full picture of potential applications for propagation-delay based X channels, it is important to obtain all feasible schemes of cyclic interference alignment including the encoder, channel instance, and decoder. However, when the dimension goes larger, theoretical analysis about this issue will become tedious and even impossible. In this letter, we propose a computer-aided solution by searching the channel space and the scheduling space, which can find all feasible schemes in details. Examples are given for some typical X channels. Computational complexity is further analyzed.

Cross-modal hashing technology has attracted much attention for its favorable retrieval performance and low storage cost. However, for existing cross-modal hashing methods, the heterogeneity of data across modalities is still a challenge and how to fully explore and utilize the intra-modality features has not been well studied. In this paper, we propose a novel cross-modal hashing approach called Modality-fused Graph Network (MFGN). The network architecture consists of a text channel and an image channel that are used to learn modality-specific features, and a modality fusion channel that uses the graph network to learn the modality-shared representations to reduce the heterogeneity across modalities. In addition, an integration module is introduced for the image and text channels to fully explore intra-modality features. Experiments on two widely used datasets show that our approach achieves better results than the state-of-the-art cross-modal hashing methods.

In mobile communication systems, the channel state information (CSI) is severely affected by the noise effect of the receiver. The adaptive subcarrier grouping (ASG) for sample matrix inversion (SMI) based minimum mean square error (MMSE) adaptive array has been previously proposed. Although it can reduce the additive noise effect by increasing samples to derive the array weight for co-channel interference suppression, it needs to know the signal-to-noise ratio (SNR) in advance to set the threshold for subcarrier grouping. This paper newly proposes adaptive zero padding (AZP) in the time domain to improve the weight accuracy of the SMI matrix. This method does not need to estimate the SNR in advance, and even if the threshold is always constant, it can adaptively identify the position of zero-padding to eliminate the noise interference of the received signal. Simulation results reveal that the proposed method can achieve superior bit error rate (BER) performance under various Rician K factors.

We study a new transistor-level side-channel leakage caused by charges trapped in between stacked transistors namely residual electric charges (RECs). Building leakage models is important in designing countermeasures against side-channel attacks (SCAs). The conventional work showed that even a transistor-level leakage is measurable with a local electromagnetic measurement. One example is the current-path leak [1], [2]: an attacker can distinguish the number of transistors in the current path activated during a signal transition. Addressing this issue, Sugawara et al. proposed to use a mirror circuit that has the same number of transistors on its possible current paths. We show that this countermeasure is insufficient by showing a new transistor-level leakage, caused by RECs, not covered in the previous work. RECs can carry the history of the gate's state over multiple clock cycles and changes the gate's electrical behavior. We experimentally verify that RECs cause exploitable side-channel leakage. We also propose a countermeasure against REC leaks and designed advanced encryption standard-128 (AES-128) circuits using IO-masked dual-rail read-only memory with a 180-nm complementary metal-oxide-semiconductor (CMOS) process. We compared the resilience of our AES-128 circuits against EMA attacks with and without our countermeasure and investigated an RECs' effect on physically unclonable functions (PUFs). We further extend RECs to physically unclonable function. We demonstrate that RECs affect the performance of arbiter and ring-oscillator PUFs through experiments using our custom chips fabricated with 180- and 40-nm CMOS processes*.

Deep learning side-channel attacks (DL-SCAs) have been actively studied in recent years. In the DL-SCAs, deep neural networks (DNNs) are trained to predict the internal states of the cryptographic operation from the side-channel information such as power traces. It is important to select suitable DNN output labels expressing an internal states for successful DL-SCAs. We focus on the multi-label method proposed by Zhang et al. for the hardware-implemented advanced encryption standard (AES). They used the power traces supplied from the AES-HD public dataset, and reported to reveal a single key byte on conditions in which the target key was the same as the key used for DNN training (profiling key). In this paper, we discuss an improvement for revealing all the 16 key bytes in practical conditions in which the target key is different from the profiling key. We prepare hardware-implemented AES without SCA countermeasures on ASIC for the experimental environment. First, our experimental results show that the DNN using multi-label does not learn side-channel leakage sufficiently from the power traces acquired with only one key. Second, we report that DNN using multi-label learns the most of side-channel leakage by using three kinds of profiling keys, and all the 16 target key bytes are successfully revealed even if the target key is different from the profiling keys. Finally, we applied the proposed method, DL-SCA using multi-label and three profiling keys against hardware-implemented AES with rotating S-boxes masking (RSM) countermeasures. The experimental result shows that all the 16 key bytes are successfully revealed by using only 2,000 attack traces. We also studied the reasons for the high performance of the proposed method against RSM countermeasures and found that the information from the weak bits is effectively exploited.

This paper proposes a sub-signal channel modulation scheme for hitless redundancy switching systems that offers highly confidential communications. A hitless redundancy switching system prevents frame loss by using multiple routes to forward the same frame. Although most studies on redundancy switching systems deal with frame duplication, elimination, and selection of redundant paths for the main signal, we focus on the transmission of the sub-signal channel. We introduce mathematical expressions to model the transmission rate and bit error rate of the sub-signal channel. To evaluate the validity of the models, we conduct numerical simulations to calculate the sub-signal transmission rate, main-signal transmission rate, and bit error rate of the sub-signal channel at physical transmission rates of 100Mb/s, 1Gb/s, and 10Gb/s. We discuss how to design sub-signal channel modulation on the basis of the evaluation results. We further discuss applications of sub-signal modulation in terms of network size and jitter.

Compared with the unicast scenario, X channels with multicast messaging can support richer transmission scenarios. The transmission efficiency of the wireless multicast X channel is an important and open problem. This article studies the degrees of freedom of a propagation-delay based multicast X channel with two transmitters and arbitrary receivers, where each transmitter sends K different messages and each receiver desires K - 1 of them from each transmitter. The cyclic polynomial approach is adopted for modeling and analysis. The DoF upper bound is analyzed and shown to be unreachable. Then a suboptimal scheme with one extra time-slot cycle is proposed, which uses the cyclic interference alignment method and achieves a DoF of K - 1. Finally, the feasibility conditions in the Euclidean space are derived and the potential applications are demonstrated for underwater acoustic and terrestrial radio communications.

This paper presents a fully digital modulation calibration technique for channel mismatch of TIADC at any frequency. By pre-inputting a test signal in TIADC, the mismatch errors are estimated and stored, and the stored values will be extracted for compensation when the input signal is at special frequency which can be detected by a threshold judgement module, thus solving the problem that the traditional modulation calibration algorithm cannot calibrate the signal at special frequency. Then, by adjusting the operation order among the error estimation coefficient, modulation function and input signal in the calibration loop, further, the order of correlation and modulation in the error estimation module, the complexity of the proposed calibration algorithm is greatly reduced and it will not increase with the number of channels of TIADC. What's more, the hardware consumption of filters in calibration algorithm is greatly reduced by introducing a CSD (Canonical Signed Digit) coding technique based on Horner's rule and sub-expression sharing. Applied to a four-channel 14bit 560MHz TIADC system, with input signal at 75.6MHz, the FPGA verification results show that, after calibration, the spurious-free dynamic range (SFDR) improves from 33.47dB to 99.81dB and signal-to-noise distortion ratio (SNDR) increases from 30.15dB to 81.89dB.

This paper describes a novel low-latency 4K 60 fps HEVC (high efficiency video coding)/H.265 multi-channel encoding system with content-aware bitrate control for live streaming. Adaptive bitrate (ABR) streaming techniques, such as MPEG-DASH (dynamic adaptive streaming over HTTP) and HLS (HTTP live streaming), spread widely on Internet video streaming. Live content has increased with the expansion of streaming services, which has led to demands for traffic reduction and low latency. To reduce network traffic, we propose content-aware dynamic and seamless bitrate control that supports multi-channel real-time encoding for ABR, including 4K 60 fps video. Our method further supports chunked packaging transfer to provide low-latency streaming. We adopt a hybrid architecture consisting of hardware and software processing. The system consists of multiple 4K HEVC encoder LSIs that each LSI can encode 4K 60 fps or up to high-definition (HD) ×4 videos efficiently with the proposed bitrate control method. The software takes the packaging process according to the various streaming protocol. Experimental results indicate that our method reduces encoding bitrates obtained with constant bitrate encoding by as much as 56.7%, and the streaming latency over MPEG-DASH is 1.77 seconds.

This letter proposes a novel intelligent dynamic channel assignment (DCA) scheme with small-cells to improve the system performance for uplink machine-type communications (MTC) based on OFDMA-FDD. Outdoor MTC devices (OMDs) have serious interference from indoor MTC devices (IMDs) served by small-cell access points (SAPs) with frequency reuse. Thus, in the proposed DCA scheme, the macro base station (MBS) first measures the received signal strength from both OMDs and IMDs after setting the transmission power. Then, the MBS dynamically assigns subchannels to each SAP with consideration of strong interference from IMDs to the MBS. Through simulation results, it is shown that the proposed DCA scheme outperforms other schemes in terms of the capacity of OMDs and IMDs.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

Channel state information (CSI) acquisition at the transmitter side is a major challenge in massive MIMO systems for enabling high-efficiency transmissions. To address this issue, various CSI feedback schemes have been proposed, including limited feedback schemes with codebook-based vector quantization and explicit channel matrix feedback. Owing to the limitations of feedback channel capacity, a common issue in these schemes is the efficient representation of the CSI with a limited number of bits at the receiver side, and its accurate reconstruction based on the feedback bits from the receiver at the transmitter side. Recently, inspired by successful applications in many fields, deep learning (DL) technologies for CSI acquisition have received considerable research interest from both academia and industry. Considering the practical feedback mechanism of 5th generation (5G) New radio (NR) networks, we propose two implementation schemes for artificial intelligence for CSI (AI4CSI), the DL-based receiver and end-to-end design, respectively. The proposed AI4CSI schemes were evaluated in 5G NR networks in terms of spectrum efficiency (SE), feedback overhead, and computational complexity, and compared with legacy schemes. To demonstrate whether these schemes can be used in real-life scenarios, both the modeled-based channel data and practically measured channels were used in our investigations. When DL-based CSI acquisition is applied to the receiver only, which has little air interface impact, it provides approximately 25% SE gain at a moderate feedback overhead level. It is feasible to deploy it in current 5G networks during 5G evolutions. For the end-to-end DL-based CSI enhancements, the evaluations also demonstrated their additional performance gain on SE, which is 6%-26% compared with DL-based receivers and 33%-58% compared with legacy CSI schemes. Considering its large impact on air-interface design, it will be a candidate technology for 6th generation (6G) networks, in which an air interface designed by artificial intelligence can be used.

This paper presents a channel operating margin (COM) based high-speed serial link optimization using machine learning (ML). COM that is proposed for evaluating serial link is calculated at first and during the calculation several important equalization parameters corresponding to the best configuration are extracted which can be used for the ML modeling of serial link. Then a deep neural network containing hidden layers are investigated to model a whole serial link equalization including transmitter feed forward equalizer (FFE), receiver continuous time linear equalizer (CTLE) and decision feedback equalizer (DFE). By training, validating and testing a lot of samples that meet the COM specification of 400GAUI-8 C2C, an effective ML model is generated and the maximum relative error is only 0.1 compared with computation results. At last 3 link configurations are discussed from the view of tradeoff between the link performance and cost, illustrating that our COM based ML modeling method can be applied to advanced serial link design for NRZ, PAM4 or even other higher level pulse amplitude modulation signal.

CPU flush instruction-based cache side-channel attacks (cache instruction attacks) target a wide range of machines. For instance, Meltdown / Spectre combined with FLUSH+RELOAD gain read access to arbitrary data in operating system kernel and user processes, which work on cloud virtual machines, laptops, desktops, and mobile devices. Additionally, fault injection attacks use a CPU cache. For instance, Rowhammer, is a cache instruction attack that attempts to obtain write access to arbitrary data in physical memory, and affects machines that have DDR3. To protect against existing cache instruction attacks, various existing mechanisms have been proposed to modify hardware and software aspects; however, when latest cache instruction attacks are disclosed, these mechanisms cannot prevent these. Moreover, additional countermeasure requires long time for the designing and developing process. This paper proposes a novel mechanism termed FlushBlocker to protect against all types of cache instruction attacks and mitigate against cache instruction attacks employ latest side-channel vulnerability until the releasing of additional countermeasures. FlushBlocker employs an approach that restricts the issuing of cache flush instructions and the attacks that lead to failure by limiting control of the CPU cache. To demonstrate the effectiveness of this study, FlushBlocker was implemented in the latest Linux kernel, and its security and performance were evaluated. Results show that FlushBlocker successfully prevents existing cache instruction attacks (e.g., Meltdown, Spectre, and Rowhammer), the performance overhead was zero, and it was transparent in real-world applications.

The ARM TrustZone architecture, which provides hardware-assisted isolation, is widely adopted in mobile and IoT devices. The security of ARM TrustZone relies on the idea of splitting system-on-chip hardware and software into two worlds, namely normal world and secure world. There are legitimate channels at the hardware level that the normal world and the secure world can use to communicate with each other. To protect these channels from being abused, research efforts were invested on restricting the access to these channels from normal world components. Therefore, only predefined and legitimate normal world components can use cross-world communication channels. In this work, we present a study on data covert channels that can bypass such protection mechanisms and smuggle sensitive information. We first analyze causes of the noise in the covert channel between two worlds. Then, we evaluate the accuracy and bandwidth of covert channels built by our PRIME+COUNT method with one built by PRIME+PROBE method. Our results demonstrate that PRIME+COUNT is an effective technique for enabling cross-world covert channels in the ARM TrustZone.

In this study, a contextual multi-armed bandit (CMAB)-based decentralized channel exploration framework disentangling a channel utility function (i.e., reward) with respect to contending neighboring access points (APs) is proposed. The proposed framework enables APs to evaluate observed rewards compositionally for contending APs, allowing both robustness against reward fluctuation due to neighboring APs' varying channels and assessment of even unexplored channels. To realize this framework, we propose contention-driven feature extraction (CDFE), which extracts the adjacency relation among APs under contention and forms the basis for expressing reward functions in disentangled form, that is, a linear combination of parameters associated with neighboring APs under contention). This allows the CMAB to be leveraged with a joint linear upper confidence bound (JLinUCB) exploration and to delve into the effectiveness of the proposed framework. Moreover, we address the problem of non-convergence — the channel exploration cycle — by proposing a penalized JLinUCB (P-JLinUCB) based on the key idea of introducing a discount parameter to the reward for exploiting a different channel before and after the learning round. Numerical evaluations confirm that the proposed method allows APs to assess the channel quality robustly against reward fluctuations by CDFE and achieves better convergence properties by P-JLinUCB.

A power-scalable wideband distributed amplifier is proposed. For reducing the power consumption of this power-hungry amplifier, it is efficient to lower the supply voltage. However, there is a hurdle owing to the transistor threshold voltage. In this work, a CMOS deeply depleted channel process is employed to overcome the hurdle.

A sub-Terahertz band is envisioned to play a great role in 6G to achieve extreme high data-rate communication. In addition to very wide band transmission, we need spatial multiplexing using a hybrid MIMO system. A recently presented paper, however, reveals that the number of observed multipath components in a sub-Terahertz band is very few in indoor environments. A channel with few multipath components is called sparse. The number of layers (streams), i.e. multiplexing gain in a MIMO system does not exceed the number of multipaths. The sparsity may restrict the spatial multiplexing gain of sub-Terahertz systems, and the poor multiplexing gain may limit the data rate of communication systems. This paper describes fundamental considerations on sub-Terahertz MIMO spatial multiplexing in indoor environments. We examined how we should steer analog beams to multipath components to achieve higher channel capacity. Furthermore, for different beam allocation schemes, we investigated eigenvalue distributions of a channel Gram matrix, power allocation to each layer, and correlations between analog beams. Through simulation results, we have revealed that the analog beams should be steered to all the multipath components to lower correlations and to achieve higher channel capacity.