Pen-input is not a new means for CAD designers, in particular, in the concept design phase. Meanwhile, B-Splines are well known curve and surface design tool in 3D shape modeling in the final modeling stages in which neat curves and surfaces should be produced. In this paper, an intuitive B-Spline design method that can be used for the CAD systems both in conceptual modeling phase and in later design phases is proposed. Unlike the control point based interactive modification schemes for the B-spline curves and surfaces, we extend what has been called the "touch-and-replace" method used for poly-line modification in the late 1980s to B-Splines; our approach uses successive pen strokes to modify the final shape of the existing B-Spline curves and surfaces. We also show related user test results in this paper as an empirical proof.

A configurable device "PCA-Chip2" implements the concept of Plastic Cell Architecture, which is an extension of programmable logic devices. This paper presents basic design tools for the PCA-Chip2 as the first step to develop the total design environment. Given a C description of a target function, configuration data for PCA-Chip2 is automatically generated by the tools. Trial designs by the tools are also presented to demonstrate the practicability of the proposed approach.

Entire systems on a chip (SOCs) embodying a processor, memory, and system-specific peripheral hardware are now an everyday reality. The current generation of SOC designers are driven more than ever by the need to lower chip cost, while at the same time being faced with demands to get designs to market more quickly. It was to support this new community of designers that we developed Satsuki-an integrated processor synthesis and compiler generation system. By allowing the designer to tune the processor design to the bitwidth and performance required by the application, minimum cost designs are achieved. Using synthesis to implement the processor in the same technology as the rest of the chip, allows for global chip optimization from the perspective of the system as a whole and assures design portability. The integral compiler generator, driven by the same parameters used for processor synthesis, promotes high-level expression of application algorithms while at the same time isolating the application software from the processor implementation. Synthesis experiments incorporating a 0.8 micron CMOS gate array have produced designs ranging from a 45 MHz, 1,500 gate, 8-bit processor with a 4-word register file to a 31 MHz, 9,800 gate, 32-bit processor with a 16-word register file.

A simple method is presented to calculate the parasitic capacitance effect in the propagation delay of series-connected MOS (SCM) structures. This method divides SCM circuits into two parts and accurately calculates the contribution of each part to the difference from the delay without parasitic capacitances.

This paper advocates the use of linear objective function in analytic analog placement. The role of linear and quadratic objctive functions in the behavior and results of an analog placement algorithm based on the force directed method is discussed. Experimental results for a MCNC benchmark circuit and another one from text books are shown to demonstrate the effect of a linear and a quadratic objective function on the analog constraint satisfaction and CPU time. By introducing linear objective function to the algorithm, we obtain better placements in terms of analog constraint satisfaction and computation cost than in case of conventional quadratic objective function.

A modern architect can not design high performance computer architecture without thinking all factors of performance from hardware level (logic/layout design) to system level (application programs, operating systems, and compilers). For computer architecture design, there are few practical CAD tools, which support design activities of the architect. In this paper, we propose a CAD tool, called COACH, for computer architecture design. COACH supports architecture design from hardware level to system level. To make a high-performance general purpose computer system, the architect evaluates system performance as well as hardware level performance. To evaluate hardware level performance accurately, logic/layout synthesis tools and simulator are used for evaluation. Logic/layout synthesis tools translate the architecture design into logic circuits and layout pattern and simulator is used to get accurate information on hardware level performance which consists of clock frequency, the number of transistors, power consumption, and so on. To evaluate system level performance, a compiler generator is introducd. The compiler generator generates a compiler of a programming language from the desripition of architecture design. The designed architecture is simulated in the behavior level with programs compiled by the compiler, and the architect can get information on system level performance which consists of program execution steps, etc. From both hardware level performance and system level performance, the architect can evaluate and revise his/her architecture, considering the architecture from hardware level to system level. In this paper, we propose a new design methodology which uses () logic/layout synthesis tools and simulators as tools for architecture design and () a compiler generator for system level evaluation. COACH, a CAD system based on the methodology, is discussed and a prototype of COACH is implemented. Using the design methodology, two processors are designed. The result of the designs shows that the proposed design methodology are effective in architecture design.

A global routing problem is formulated as a multi-commodity network flow problem. The formulation gives no restriction over the shape of a routing pattern and makes it possible to obtain the optimal solution by using a mathematical programming method. Moreover, it can be naturally extended to the problem even optimizing routing length objectives for net delay and clock skew perfomances by using the goal programming method. An approximation algorithm solving the multi-commodity network flow problem is proposed by adding a merge step of wires whose source-sink pairs are exactly the same and a step restricting an area for searching routes. Experimental results show that this global routing algorithm connected with a line-search detailed router can generate a complete routing for interblock routing problems with more than 2400 wires in two industrial chips. The total amount of procassing time for both problems is about 90 minutes on a mainframe computer.

This paper describes a new automated approach to generating the patterns of CMOS leaf cells from transistor-level connectivity data. This method can generate CMOS leaf cells that are configurable to a macro cell satisfying user-specified constraints. The user-specified constraints include the aspect ratio and port positions of the macro cell. We propose a top-down method for converting the macro cell level constratints to leaf cell level ones. Using this method, a variety of customized macro cells can be designed in a short turn-around time. The method consists of four processes--diffusion sharing, initial placement, placement improvement and routing--which culminate in the automatic generation of symbolic representations. Using a compactor, those symbolic representations can be converted to physical patterns which are gathered into a macro cell by a macro generator. We define various objective functions to improve unit pair placement. We also introduce five ways to optimize leaf cell area: 1) multi-row division, 2) gate division 3) rotation, 4) power line and diffusion overlapping and 5) reconstruction of hierarchical structure. The proposed approach has been applied to various kinds of CMOS leaf cells. Experimental results show that the generated cells have almost the same areas as those generated by conventional bottom-up approaches in leaf and macro cell layouts. This approach offers a further advantage in that the various-sized macro cells required by layout disigners can also be generated.

The performance of analog circuits is strongly influenced by their layout. Performance specifications are usually translated into physical constraints such as symmetry, common orientation, and distance constraints among certain components. Automatic digital layout tools can be adopted and modified to deal with the imposed performance constraints on the analog layout. The selection and modifications of algorithms to handle the analog constraints became the area of research in analog layout systems. The existing systems are characterized by the use of stochastic optimization techniques based placement, grid based or channel routers, and lack of compaction. In this paper, algorithms for analog circuit placement, routing, and compaction are presented. The proposed algorithms consider the analog oriented constraints, which are important from an analog layout point of view, and reduce the computation cost. The placement algorithm is based on a force directed method and consists of two main phases, each of which includes a tuning procedure. In the first phase, we solve a set of simultaneous linear equations, based upon the attractive forces. These attractive forces represent the interconnection topology of given blocks and some specified constraints. Symmetry constraint is considered throughout the tuning procedure. In the second phase, block overlap resulting from the first phase is resolved iteratively, where each iteration is followed by the symmetry tuning procedure. Routing is performed using a line expansion based gridless router. Routing constraints are taken into account and several routing priorities are imposed on the nets. The compactor part employs a constraint graph based algorithm while considering the analog symmetry constraints. The algorithms are implemented and integrated within an analog layout design system. An experimental result for an OP AMP provided by MCNC benchmark is shown to demonstrate the performance of the algorithms.

This paper presents an optimal constraint graph generation algorithm for graph-based one-dimensional layout compaction. The first published algorithm for this problem was the shadow-propagation algorithm. However, without sophisticated implementation of a shadow-front, complexity of the algorithm could fall into O(n2), where n is the number of layout objects. Although our algorithm, called the enhanced plane-sweep based graph generation algorithm, is an extension of the shadow-propagation algorithm, such a drawback is resolved by introducing an enhanced plane-sweep technique. The algorithm maintains multiple shadow-fronts simultaneously by storing them in a work-list called previous-boundary. Since a balanced search tree is selected for implementation of the worklist, total complexity of the algorithm is O(n log n) which is optimal. Experimental results show that the enhanced plane-sweep based graph generation algorithm runs in almost linear time with respect to the number of layout objects and is faster than the perpendicular plane-sweep algorithm which is also optimal in terms of time complexity.

This paper describes an automatic transistor model parameter generation technique for a circuit simulator which can take device geometry into account. An 'area factor' is used to generate model parameters for different transistor shapes; however, the conventional method could not reflect the actual geometry differences other than for the emitter area. This resulted in inaccurate model parameters and such parameters were not acceptable to accurately simulate circuits for RF ICs. The proposed technique uses actually measured parameters and process data for a reference transistor and generates the individual model parameters for different shape transistors. In this technique, the parasitic resistor values are calculated and fitted in place of directly extracting them from the measured data. This ensures a better estimate. The reference transistor is made sufficiently large to neglect measurement errors in generating the parasitic capacitors. Thus, the model parameters for a very small transistor can be generated accurately. The model generating procedure has been implemented as a pre-processor to SPICE. This technique enables a fast turn around for RF IC circuit design which uses various shape transistors.

The paper proposes a combined delay model to manipulate the variance of the delay time of logic elements and a new timing verification method based on the theory of regular expressions. With the delay time of logic elements such as TTL SN7400, the minimum delay time (dm), the maximum delay time (dM), and the typical delay time are specified in the manual, and the delay time of an element is one in the interval between dm and dM. Here we assume a discrete time, and we manipulate the variance of the delay time as a set of output strings corresponding to each delay time. We call the model as the combined delay model. Since many output strings are generated with a single input string, the usual timing simulation method cannot be applied. We propose a timing verification method using a behavior extraction method of logic circuits with respect to a time string set: with respect to the specified input set, the method extracts the output string set of each element in the circuit. We devised (1) a mechanism to keep the correspondence between a primary input string and an output string with respect to the primary input string, (2) a mechanism to manipulate the nondeterminism included in the combined delay model, and (3) an event-driven like data compaction method in representing finite automata. We focused on the hazard detection problem and the verification of asynchronous circuits, and show the effectiveness of our method with medium sized circuit with 100 elements or so. The method includes the state explosion, but the data compaction method and the extraction for only the specified input set are useful to control the state explosion.

This paper deals with the sub-problems of generating a mask pattern from the logical description of a large-scale CMOS circuit. The large-scale layout can be generated in divide-and-conquer style: divide a given circuit into a set of sub-circuits, generate the layout of each sub-circuit, and merge the resulting layouts to create the whole layout. This paper proposes a layout synthesis algorithm for a sub-circuit with physical constraints for the synthesis scheme above. The physical constraints considered here are the relative placement of logic cells (sets of logic gates) and the routing constraint based on the costs of wiring layers and vias. These constraints will be given by the global optimizer in a two-dimensional layout synthesis routine, and they should be kept at the subsequent one-dimensional layout synthesis for a sub-circuit. The latter is also given for enhancing the circuit performance by limiting the usage of wiring layers and vias for special net such as a clock net. The placement constraint is maintained using PQ-tree, a tree structure representing a set of restricted permutations of elements. One-dimensional layout synthesis determines the placement of transistors by the enhanced pairwise exchanging method under the PQ-tree representation. The routing constraints is considered in the newly developed line-search routing method using a cost-based searching. Experimental results for practical standard cells, including up to 200 transistors, prove that the algorithms can produce the layouts comparable to handcrafted cells. Also on a two-dimensional layout synthesis using the algorithms, the results for benchmark circuits of Physical Design Workshop 1989, i.e., MCNC benchmark circuits, are superior to the best results exhibited at Design Automation Conference 1990.