Two-dimensional (2-D) maximally flat finite impulse response (FIR) digital filters have flat characteristics in both passband and stopband. 2-D maximally flat diamond-shaped half-band FIR digital filter can be designed very efficiently as a special case of 2-D half-band FIR filters. In some cases, this filter would require the reduction of the filter lengths for one of the axes while keeping the other axis unchanged. However, the conventional methods can realize such filters only if difference between each order is 2, 4 and 6. In this paper, we propose a closed-form frequency response of 2-D low-pass maximally flat diamond-shaped half-band FIR digital filters with arbitrary filter orders. The constraints to treat arbitrary filter orders are firstly proposed. Then, a closed-form transfer function is achieved by using Bernstein polynomial.

Cyber attacks targeting specific victims use multiple intrusion routes and various attack methods. In order to combat such diversified cyber attacks, Threat Intelligence is attracting attention. Attack activities, vulnerability information and other threat information are gathered, analyzed and organized in threat intelligence and it enables organizations to understand their risks. Integrated analysis of the threat information is needed to compose the threat intelligence. Threat information can be found in incident reports published by security vendors. However, it is difficult to analyze and compare their reports because they are described in various formats defined by each vendor. Therefore, in this paper, we apply a modeling framework for analyzing and deriving the relevance of the reports from the views of similarity and relation between the models. This paper presents the procedures of modeling incident information described in the reports. Moreover, as case studies, we apply the modeling method to some actual incident reports and compare their models.

Coordinated Multi-point (CoMP) transmission has long been known for its ability to improve cell edge throughput. However, in a CoMP cellular network, fixed CoMP clustering results in cluster edges where system performance degrades due to non-coordinated clusters. To solve this problem, conventional studies proposed dynamic clustering schemes. However, such schemes require a complex backhaul topology and are infeasible with current network technologies. In this paper, small power base stations (BSs) are introduced instead of dynamic clustering to solve the cluster edge problem in CoMP cellular networks. This new cell topology is called the diamond cellular network since the resultant cell structure looks like a diamond pattern. In our novel cell topology, we derive the optimal locations of small power base stations and the optimal resource allocation between the CoMP base station and small power base stations to maximize the proportional fair utility function. By using the proposed architecture, in the case of perfect user scheduling, a more than 150% improvement in 5% outage throughput is achieved, and in the case of successive proportional fair user scheduling, nearly 100% improvement of 5% outage throughput is achieved compared with conventional single cell networks.

The effect of annealing on the field emission characteristics of a field emitter comprising diamond micropowder was investigated. The threshold voltage Vth at which the emission current begins to flow decreased as the annealing temperature increased, and a minimum Vth was obtained at an annealing temperature of 1345K. The reduction in threshold voltage was due to a reduction in the work function with annealing.

This paper presents two types of cryptanalysis on a Merkle-Damgård hash based MAC, which computes a MAC value of a message M by Hash(K||l||M) with a shared key K and the message length l. This construction is often called LPMAC. Firstly, we present a distinguishing-H attack against LPMAC instantiated with any narrow-pipe Merkle-Damgård hash function with O(2n/2) queries, which indicates the incorrectness of the widely believed assumption that LPMAC instantiated with a secure hash function should resist the distinguishing-H attack up to 2n queries. In fact, all of the previous distinguishing-H attacks considered dedicated attacks depending on the underlying hash algorithm, and most of the cases, reduced rounds were attacked with a complexity between 2n/2 and 2n. Because it works in generic, our attack updates these results, namely full rounds are attacked with O(2n/2) complexity. Secondly, we show that an even stronger attack, which is a powerful form of an almost universal forgery attack, can be performed on LPMAC. In this setting, attackers can modify the first several message-blocks of a given message and aim to recover an internal state and forge the MAC value. For any narrow-pipe Merkle-Damgård hash function, our attack can be performed with O(2n/2) queries. These results show that the length prepending scheme is not enough to achieve a secure MAC.

The thermionic emission properties of diamond micropowders were investigated. The thermionic emission current was observed at a low temperature of 702 K, and a work function of approximately 1.97 eV was obtained. Band bending in diamond micropowders induced by an applied electric field had a considerable influence on decreasing the work function.

On the basis of the RF characteristics of p-type diamond field-effect transistors (FETs) with hydrogen surface termination, we establish an equivalent circuit (EQC) model. From comparisons of three cases we reveal that to represent the device performance in the EQC, the source, gate, and drain resistance should be considered but that the gate-source and gate-drain resistance can be ignored. The features of diamond FETs are (1) a plateau of the gate capacitance in a certain gate voltage range. (2) maximum fT and fMAX cut-off frequencies near the threshold gate voltage, and (3) a high fMAX/fT ratio 3.8. We discuss these features in terms of the energy barrier between the gate metal and the two-dimensional hole channel and drift region below the gate.

Our investigation of diamond-like carbon (DLC) nano-springs with a 130 nm spring-section diameter, which were fabricated by focused-ion-beam chemical vapor deposition (FIB-CVD), showed for the first time that nanosprings can be stretched. We observed large displacements of the FIB-CVD nanosprings using in situ optical microscopy; in other words, the nanosprings showed behavior similar to that of macroscale springs. In addition, we investigated the dependence of the spring constant of DLC nanosprings on spring diameter. The spring constants, measured using commercially available cantilevers, ranged from 0.47 to 0.07 N/m. The diameter dependence of spring constant can be accurately expressed by the conventional formula for a coil spring. The estimated shear modulus of the DLC nano-springs was about 70 GPa. This value is very close to the value of conventional coil springs made of steel. Furthermore, we measured the stiffness of a DLC nanospring annealed at 1000 in vacuum. The stiffness was decreased to approximately half of the stiffness of the nanospring without annealing.

A novel threshold choosing method for the threshold-based skip mechanism is presented, in which the threshold is obtained from the analysis of the video device induced noise variance. Simulation results show that the proposed method can remarkably reduce the computation time consumption with only marginal performance penalty.

We developed a process to fabricate optical functions such as, lens, prism, or diffuser directly on to a glass substrate. Processes include precision mastering by diamond cutting, and multi-layer photopolymer (2P) molding process to realize flat surface and integration of multiple functions with a good alignment within few micrometers.

RF diamond FETs have been realized on a hydrogen-terminated diamond surface conductive layer. By utilizing the self-aligned gate fabrication process which is effective for the reduction of the parasitic resistance, the transconductance of diamond FETs has been greatly improved. Consequently, the high frequency operation of 22 GHz has been realized in 0.2 µ m gate diamond MISFETs with a CaF2 gate insulator. This value is the highest in diamond FETs and is comparable to the maximum value of SiC MESFETs at present.

We report field emission from multilayered cathodes grown on silicon and glass substrates. The cathode consist of a layer of nanoseeded diamond and overlayers of nanocluster carbon (sp2 bonded carbon) and tetrahedral amorphous carbon (predominantly sp3 bonded carbon). These films exhibit good field emission characteristics with an electron emission current density of 1µA/cm2, at a field of 5.1V/µm. The multilayered cathodes on silicon substrates exhibit even lower emission threshold field of about 1-2V/µm for an emission current density of 1µA/cm2. The emission is influenced by the nanoseeded diamond size and concentration and the properties of the nano carbon over layer.

Field emission display (FED) is evolving as a promising technique of flat panel displays in the future. In this paper, various carbon based nanostructures are acted as cathode materials for field emission devices. Dendrite-like diamond-like carbon emitters, carbon nanotubes, carbon nanotips are synthesized by microwave plasma chemical vapor deposition. Many factors affect the performance of field emitters, such as the shape, work function and aspect ratio of emission materials. Modified process of carbon based nano-materials for enhancing field emission efficiency are included intrinsic and extrinsic process. These reformations contain the p-type and n-type doping, carburization and new ultra well-aligned carbon nano-materials. It is found that carbon nano-materials grown on micropatterned diode show higher efficiency of FED. In addition, to achieve a low- turn-on field, the novel scheme involving a new fabrication process of gated structure metal-insulator-semiconductor (MIS) diode by IC technology is also presented.

Seeding substrates with diamond nanocrystals has been considered to be a promising nondestructive pretreatment method for growth of diamond films. However, its application is strongly impeded by the segregation of diamond nanocrystals on substrates. In the present study, we suggest a very simple but effective seeding way ("sandwich" (SW) seeding way) to prevent nanocrystals from segregation. By the SW seeding way, the diamond nanocrystals can be nearly uniformly dispersed on Si substrates with the areal density of the order of 108cm-2. On the nano-seeded Si substrates the continuous and homogeneous diamond films can be successfully fabricated using a microwave plasma enhanced chemical-vapor-deposition (MPECVD) equipment. The cross-sectional transmission electron microscopy (TEM) images reveal that compare with the diamond films grown on the Si substrates pretreated by the conventional scratching method, the films deposited on the nano-seeded Si substrates present a much flatter interfacial structure, suggesting that the SW seeding way can effectively reduce the interface coarseness.

Electron field emission from diamond, diamond-like carbon, carbon nanotubes and nano-structured carbon is compared. It is found that in all practical cases, emission occurs from regions of positive electron affinity with an emission barrier of 5eV, the work function, and with a large field enhancement. The field enhancement in nanotubes arises from their geometry. In diamond, the field enhancement occurs by depletion of grain boundary states. In diamond-like carbon we propose that it occurs by the presence of sp2-rich channels formed by the soft conditioning process.

Electron emissions from single-crystalline diamond surfaces by internally exciting electrons from the valence to conduction bands have been investigated. Monte Carlo simulations have been employed to estimate the impact ionization rates of carriers in diamond under high electric fields up to 1107V/cm. The calculations demonstrate substantial impact ionization rates which rapidly increase with increasing electric fields above 8105V/cm. Highly efficient electron emissions with high emission current efficiencies of approximate unity have been attained from a MIS-type diamond layered structure that are composed of heavily ion-implanted buried layer (M), undoped diamond (I) and hydrogenated p-type diamond (S) with an emission surface of a negative electron affinity. The highly efficient emission mechanism is discussed in relation to the field excitation of electrons from the valence band to the conduction band in the undoped diamond layer and the carrier transport to the diamond surface.

Electron field emission from polycrystalline diamond films has been investigated. Electron emission was measured locally at randomly chosen point on a diamond film fabricated by a microwave plasma chemical deposition method. In the original film, there were some points with a large emission current where flaws were found after the measurements, some points with a small and stable emission current without any flaw, and the other points with no emission. At the point of no emission, the film was electrically broken down by applying a high voltage. After the intentional breaking down, a small and stable emission always appeared there with no flaw. The maximum emission current extracted from an emission site was usually 1µA with no structural flaw found after the measurements. By using a simple model of emission site consisting of a core conductor embedded in insulator, the limitation of emission current is estimated from heating by the current and heat transfer to the insulator.

The polymer matrix for the number of N in-puts/outputs, N stages and 2x2-switches is denoted as the 1-D Spanke-Benes (SB) network. Throughout the paper, the 1-D SB-network, which equals the diamond cellular array, is extended to arbitrary dimensions by a mathematical transformation (a 1-D network provides the interconnection of 1-D data). This transformation determines the multistage architecture completely by providing size, location, geometry and wiring of the switches as well as it preserves properties of the networks, e.g., the capability of sorting. The SB-networks of dimension 3 are analysed and sorting is applied.

Micro-tribology is a key technology in micro-machine. Atomic-scale wear and friction fluctuations degrade the performance of micro-machines. New wear-resistant, low friction materials should be useful in reducing micro- and macro-tribological wear and friction fluctuations. Our investigation of the frictional characteristics of polished CVD diamond films by FFM (friction force microscope), AFM (atomic force microscope) and conventional reciprocating tribometer and trial micro processing of diamond produced three main results. First, the friction coefficient of diamond film increases rapidly with decreasing load in the micro-load region. This is partially due to the surface tension of adsorbed water on the surface under high humidity. In the macro-load region also, the friction coefficient increases with decreasing load, but, in this case it is due to elastic deformation. The second result is that diamond film has excellent wear resistance in the micro-load region compared with silicon and diamond-like carbon (DLC) film. Finally, a micro-diamond gear and diamond shaft were fabricated by laser machining and thermo-chemical etching, and then assembled.

A new electrostatic wobble motor design and fabrication method were proposed, and micromotors were successfully fabricated and operated. The advantages are (1) thicker structural size, resulting in larger torque, (2) simple and safe fabrication process and (3) needle-shaped bearing to support the rotor. Needle-shaped bearing used here is expected to have lower friction comparing with the existing motor, since the load is smaller for this kind of bearing structure. Two major sources of the load, electrostatic force and capillary force, were considered to prove this tendency. Diamond-like Carbon (DLC) film was employed as a solid lubricant for its bearing. The friction of DLC and that of ilicon-dioxide were compared by experiment.