It has been shown that the output information produced by the soft output Viterbi algorithm (SOVA) is too optimistic. To compensate for this, the output information should be normalized. This letter proposes a simple normalization technique that extends the existing sign difference ratio (SDR) criterion. The new normalization technique counts the sign differences between the a-priori information and the extrinsic information, and then adaptively determines the corresponding normalization factor for each data block. Simulations comparing the new technique with other well-known normalization techniques show that the proposed normalization technique can achieve about 0.2 dB coding gain improvement on average while reducing up to about 1/2 iteration for decoding.

This paper shows the effectiveness of a cinematographic camera for controlling 3D video by measuring its effects on viewers with several typical camera works. 3D free-viewpoint video allows us to set its virtual camera on arbitrary positions and postures in 3D space. However, there have been neither investigations on adaptability nor on dependencies between the camera parameters of the virtual camera (i.e., positions, postures, and transitions) nor the impressions of viewers. Although camera works on 3D video based on expertise seems important for making intuitively understandable video, it has not yet been considered. When applying camera works to 3D video using the planning techniques proposed in previous research, generating ideal output video is difficult because it may include defects due to image resolution limitation, calculation errors, or occlusions as well as others caused by positioning errors of the virtual camera in the planning process. Therefore, we conducted an experiment with 29 subjects with camera-worked 3D videos created using simple annotation and planning techniques to determine the virtual camera parameters. The first point of the experiment examines the effects of defects on viewer impressions. To measure such impressions, we conducted a semantic differential (SD) test. Comparisons between ground truth and 3D videos with planned camera works show that the present defects of camera work do not significantly affect viewers. The experiment's second point examines whether the cameras controlled by planning and annotations affected the subjects with intentional direction. For this purpose, we conducted a factor analysis for the SD test answers whose results indicate that the proposed virtual camera control, which exploits annotation and planning techniques, allows us to realize camera working direction on 3D video.

The article describes recent adaptive estimation algorithms over distributed networks. The algorithms rely on local collaborations and exploit the space-time structure of the data. Each node is allowed to communicate with its neighbors in order to exploit the spatial dimension, while it also evolves locally to account for the time dimension. Algorithms of the least-mean-squares and least-squares types are described. Both incremental and diffusion strategies are considered.

An explicit expression for the impulse response coefficients of the predictive FIR digital filters is derived. The formula specifies a four-parameter family of smoothing FIR digital filters containing the Savitsky-Goaly filters, the Heinonen-Neuvo polynomial predictors, and the smoothing differentiators of arbitrary integer orders. The Hahn polynomials, which are orthogonal with respect to a discrete variable, are the main tool employed in the derivation of the formula. A recursive formula for the computation of the transfer function of the filters, which is the z-transform of a terminated sequence of polynomial ordinates, is also introduced. The formula can be used to design structures with low computational complexity for filters of any order.

This paper reports a novel design in Photonic Crystal Fibers (PCFs) with nearly zero ultra-flattened dispersion characteristics. We describe the chromatic dispersion controllability taking non-uniform air hole structures into consideration. Through optimizing non-uniform air hole structures, the ultra-flattened zero dispersion PCFs can be efficiently designed. We show numerically that the proposed non-uniform air cladding structures successfully archive flat dispersion characteristics as well as extremely low confinement losses. As an example, the proposed PCF with flattened dispersion of 0.27 ps/(nmkm) from 1.5 µm to 1.8 µm wavelength with confinement losses of less than 10-11 dB/m. Finally, we point out that full controllability of the chromatic dispersion and confinement losses, along with the fabrication technique, are the main advantages of the proposed PCF structure.

Future optical code division multiple access (CDMA) networks should be designed for multirate and fully integrated multimedia services. In the conventional schemes, multilength optical orthogonal codes (OOCs) are designed to support multirate systems, while variable-weight OOCs are designed to support differentiated quality of service (QoS) for multimedia applications. In this paper, a novel class of optical signature codes; multiple-length variable-weight optical orthogonal codes (MLVW-OOC) is proposed for supporting multirate and integrated multimedia services in optical CDMA networks. The proposed MLVW-OOC has features that are easy to construct variable-weight codes and expanded to multiple-length codes. A construction method for designing MLVW-OOCs up to three levels of codes is discussed. The designed MLVW-OOCs can support differentiated requirements on data rates and QoS for several types of services in the networks. A code analysis for obtaining the value of cross-correlation constraints or multiple access interference (MAI) computation for several levels of codes is also suggested. The cross-correlation constraints of the proposed codes are better than the conventional codes such as multilength OOCs. Finally, the bit error probability performance of the two-level MLVW-OOC is evaluated analytically. The results show that the proposed MLVW-OOC can provide differentiated bit error probability performances for several combinations of data rates and QoS.

Contact resistance is caused by constriction resistance and film resistance through contact layers. It is well known that a surface film causes non-linear voltage and current characteristics. The origin of non-linearity is caused by tunneling electron through thin insulation barrier or jumping over the thick barrier (Shottky barrier) on the contact surface. In this paper, a new idea causing nonlinear property by only current constriction which flows through very small contact spot area, if there is no film layer, is proposed by the two dimensional contact model. The contact model, used in this paper, is a two dimensional type narrow path of contact area (short bridge) made by thin copper foil of 0.035 mm on a glass epoxy resin board. The contact part is made by scraping with an electric drill as a single bridge shape of 0.1 mm wide and 0.3 mm long on the centre of a board (100 mm100 mm). The 3rd harmonic distortion voltage was measured by using a Component Linearity Test Equipment (Type CLT1 made by Radiometer Electronics Company) which the system supplies a pure sine wave current of 10 kHz and detects a distortion voltage of 30 kHz by a narrow band pass filter circuit. The sensitivity of the Component Linearity Test Equipment (CLT1) is under a 10-9 volt. Four bridge samples were examined for the comparison of nonlinear distortion voltage. The distortion voltage of a sample (A) (0.1 mm wide, 0.3 mm long) is too larger than the one of the sample (B) (0.2 mm wide, 0.3 mm long) at the same applied voltage which resistance is not so different each other. It seems that current constriction to the spot (A) may heat up higher and cool down lower than (B). It would be also guessed that the power dissipation of 20 kHz cause temperature oscillation of 20 kHz, then it causes a component of contact resistance of 20 kHz, and therefore the product of 10 kHz current and 20 kHz resistance component cause 30 kHz component distortion voltage.

A design method for an ultra-wideband bandpass filter (BPF) with four coupled lines has been developed. For demonstration purposes, 50 Ω-matched self-complementary antennas integrated with the ultra-wideband, differential-mode BPF with four coupled lines, a notch filter, and a low-pass filter (LPF) were prepared and tested. An optimized structure for a single-stage, broadside-coupled and edge-coupled four-lines BPF was shown to exhibit up to 170% fractional bandwidth and an impedance transformation ratio of 1.2 with little bandwidth reduction, both analytically and experimentally. Using the optimized structure, 6-stage BPFs were designed to transform the self-complementary antenna's constant input impedance (60πεe- 1/2(Ω)) to 50 Ω without degrading bandwidth. In addition, two types of filter variations--a LPF-embedded BPF and a notch filter-embedded BPF--were designed and fabricated. The measured insertion loss of both filter systems was less than 2.6 dB over the ultra-wideband (UWB) band from 3.1 GHz to 10.6 GHz. The filter systems were embedded in the wideband self-complementary antennas to reject unnecessary radiation over the next pass band and 5-GHz wireless LAN band.

Motion estimation (ME) is a computation intensive procedure in H.264. In ME for variable block sizes, an effective scan ordering method has been devised for early termination of absolute difference computation when the termination does not affect the performance. The new ME circuit with effective scan ordering can reduce the amount of computation by 70% compared to JM8.2 and by 30% compared to the disable approximation unit (DAU) approach.

The traditional feedback linearization method often requires the full system parameter and state information. In this paper, we consider an asymptotic stabilization problem of a class of feedback linearizable nonlinear systems by using less than the full parameter/state information. First, our approach is to classify system parameters into two categories--'directly used parameters' and 'indirectly used parameters.' Then, a feedback linearizing controller is designed by using only the 'directly used parameters' and the observer is utilized to estimate the transformed states (diffeomorphism) which includes 'indirectly used parameters.' Thus, in our control approach, we use only a partial set of system parameters and partial state information for asymptotic stability. The useful aspects of the proposed scheme are illustrated through an example.

Traffic markers differentiate among packets from senders based on their service profile in the differentiated service networks. Researchers have previously revealed that the existing marking mechanism causes the unfairness in aggregates. This study presents a new marking algorithm. Simulation results demonstrate that the fairness of the proposed scheme exceeds that of SRTCM, TRTCM, TSWTCM and ITSWTCM for medium to high network provision levels.

We propose a service differentiation scheme for optical burst switching (OBS) with the scheduling algorithm Horizon. In the proposed scheme, in addition to the latest horizon used in the conventional Horizon, we introduce the second latest horizon and use them for reservation preemption. Burst priority order is perfectly guaranteed according to the burst class information informed by its control packet if the arrival time of the burst is later than the second latest horizon and earlier than the latest horizon. Since the extra offset time is no longer needed for service differentiation, the burst blocking probability and the data latency will be reduced. We assume a multi-hop network with ring topology where bursts traverse five intermediate nodes, and evaluate the performance in terms of the end-to-end and hop-by-hop burst blocking probabilities. Simulation results show that the proposed scheme can achieve service differentiation with smaller blocking probability than the extra-offset-time-based scheme with Horizon. Furthermore, we show that the proposed scheme preserves service differentiation even in multi-hop environments.

We address the problem of routing and wavelength assignment (RWA) considering differentiated reliability (DiR) in WDM mesh networks. The backup resource can be shared by the primary lightpaths. However, both the primary-backup sharing and the different levels of fault tolerance requirement have never been considered together in the literature. In the paper, we consider the dynamic character of the link availability, which is caused by primary-backup sharing. Moreover, the priority of traffic is considered in the paper. The paper focuses on routing under dynamic availability of wavelength resource while the requested reliability of traffic has to be met, using the modified shortest path algorithm. A layered availability model is established based on wavelength layered graph model. Using this model, we propose a new algorithm called dynamic layered availability (DLA) algorithm. We evaluate the performance of the proposed algorithm on the NSFNET.

We have numerically evaluated the filtering characteristics of two vertically coupled microring resonator filters. In this evaluation we used the finite-difference time-domain method as the numerical analysis method. The structure we designed allows only a specific wavelength to pass. The filtering characteristics of this structure can be altered by changing the layout of the microring resonator. By using this structure the interval between peak wavelengths at a specific wavelength in the output spectrum can be increased. Specifically, the interval between peak wavelengths can be increased from 20 nm to 40 nm at wavelengths near 1.46 µm.

The crosstalks between a single-ended line and a differential pair in parallel are analyzed using telegrapher's equations for multi-conductor lines. The crosstalk from the single-ended trace to the differential pair is estimated at shunt-arm resistors in T or Π termination networks. The analysis is conducted by incorporating the termination conditions with the solution of the telegrapher's equations. The time-domain characteristics of the crosstalk are obtained by using the fast inverse Laplace transform. The measurements are conducted easily by using a single-ended digital oscilloscope since the crosstalk is evaluated on the shunt-arm resistors. Both the calculated and measured results are presented, and the characteristics of the crosstalk are also investigated qualitatively.

This paper presents an automated design of linear and non-linear differential analog circuits accelerated by reuse of genetic operations. The system first synthesizes circuits using pairs of simplified MOSFET model. During the evolutionary process, genetic operations that improve circuit characteristics are stored in a database and reused to effectively obtain a better circuit. Simplified elements in a generated circuit are replaced by MOSFETs and optimization of the transistor size is performed using an optimizer available in market if necessary. The capability of this method is demonstrated through experiments of synthesis of a differential voltage amplifier, a circuit having cube-law characteristic in differential mode and square-law characteristic in common-mode, and a dB-linear VGA (Variable Gain Amplifier). The results show the reuse of genetic operations accelerates the synthesis and success rate becomes 100%.

We investigate the issues involved in designing a packet scheduler for the proportional delay differentiation (PDD) model in differentiated services (DiffServ) networks. The PDD model controls the average waiting time of each class such that the average waiting time is proportional to its corresponding delay differentiation parameter. This paper proposes a novel packet scheduler for PDD referred to as the longest waiting time first (LWTF). By adding certain conditions, we found that the LWTF scheduler can be reduced to a known packet scheduler-priority queue with linear priorities (PQ-LP). The properties and behaviors of LWTF can be predicted from the analysis of PQ-LP. The simulation results in comparison with other PDD algorithms have also revealed that LWTF provides no worse level of service quality in long timescales and affords more accurate and robust control over the delay ratio in short timescales.

A novel PND (PMOS-NMOS-Depletion MOS) technology for a single poly gate non-volatile memory cell design has been reported for the first time. This technology features memory cell design with a differential cell architecture which enables to provide the higher performance for the key specifications such as programming time, erasing time, and endurance characteristics. This memory cell consists of 3-Transistors, PMOS, NMOS, and Depletion MOS transistors (hereafter PND). The DMOS in this cell is used for the tunneling device in the erasing operation, while the NMOS and the PMOS are used for the tunneling device and the coupling capacitor in the programming operation, respectively. The proposed PND design can allow lower applied voltage of the erase-gate (EG) and control-gate (CG) in the erasing and the programming operations so that the endurance characteristics can be improved because the DMOS suppresses the potential of floating-gate (FG) and hence the effective potential difference between the EG and the FG can be increased in the erasing operation. Based on the measured data, it can be expected that the erasing speed of the PND cell can be 125-fold faster than that of our previously reported work (PN type). Therefore, high performance and high reliability CMOS non-volatile memory without any additional process can be realized using this proposed PND technology.

In this paper we propose a method of constructing quasi-cyclic regular LDPC codes from a cyclic difference family, which is a kind of combinatorial design. The resulting codes have no 4-cycle, i.e. cycles of length four and are defined by a small set of generators of codes with high rate and large code length. In particular, for LDPC codes with column weight three, we clarify the conditions on which they have no 6-cycle and their minimum distances are improved. Finally, we show the performance of the proposed codes with high rates and moderate lengths.

To keep in step with the rapid progress of high quality imaging systems, the Digital Cinema Initiative (DCI) has been issuing digital cinema standards that cover all processes from production to distribution and display. Various evaluation measurements are used in the assessment of image quality, and, of these, the required number of quantization bits is one of the most important factors in realizing the very high quality images needed for cinema. While DCI defined 12 bits for the bit depth by applying Barten's model to just the luminance signal, actual cinema applications use color signals, so we can say that this value has an insufficient theoretical basis. This paper, first of all, investigates the required number of quantization bits by computer simulations in discrete 3-D space for the color images defined using CIE's XYZ signal. Next, the required number of quantization bits is formulated by applying Taylor's development in the continuous value region. As a result, we show that 13.04 bits, 11.38 bits, and 10.16 bits are necessary for intensity, density, and gamma-corrected signal quantization, respectively, for digital cinema applications. As these results coincide with those from calculations in the discrete value region, the proposed analysis method enables a drastic reduction in the computer simulation time needed for obtaining the required number of quantization bits for color signals.