The paper demonstrates a novel multiple-valued logic (MVL) design using a three-peak negative differential resistance (NDR) circuit, which is made of several Si-based metal-oxide-semiconductor field-effect-transistor (MOS) and SiGe-based heterojunction bipolar transistor (HBT) devices. Specifically, this three-peak NDR circuit is biased by two switch-controlled current sources. Compared to the traditional MVL circuit made of resonant tunneling diode (RTD), this multiple-peak MOS-HBT-NDR circuit has two major advantages. One is that the fabrication of this circuit can be fully implemented by the standard BiCMOS process without the need for molecular-beam epitaxy system. Another is that we can obtain more logic states than the RTD-based MVL design. In measuring, we can obtain eight logic states at the output according to a sequent control of two current sources on and off in order.

The error diffusion filter in this paper is optimized with respect to the ideal blue noise pattern corresponding to a single tone level. The filter coefficients are optimized by the minimization of the squared error norm between the Fourier power spectra of the resulting halftone and the blue noise pattern. During the process of optimization, the binary pattern power spectrum matching algorithm is applied with the aid of a new blue noise model. The number of the optimum filters is equal to that of different tones. The visual fidelity of the bilevel halftones generated by the error diffusion filters is evaluated in terms of a weighted signal-to-noise ratio, Fourier power spectra, and others. Experimental results have demonstrated that the proposed filter set generates satisfactory bilevel halftones of grayscale images.

The purpose of this study is to estimate the possible effect of cellular radio on implantable cardiac pacemakers in elevators. We previously investigated pacemaker EMI in elevator by examining the E-field distribution of horizontal plane at the height of expected for implanted pacemakers inside elevators. In this paper, we introduce our method for estimating EMI impact to implantable cardiac pacemakers using EMF distributions inside the region of the human body in which pacemakers are implanted. Simulations of a human phantom in an elevator are performed and histograms are derived from the resulting EMF distributions. The computed results of field strengths are compared with a certain reference level determined from experimentally obtained maximum interference distance of implantable cardiac pacemakers. This enables us to carry out a quantitative evaluation of the EMI impact to pacemakers by cellular radio transmission. This paper uses a numerical phantom model developed based on an European adult male. The simulations evaluate EMI on implantable cardiac pacemakers in three frequency bands. As a result, calculated E-field strengths are sufficiently low to cause the pacemaker to malfunction in the region examined.

We present a full description of a polarization-independent athermal differential quadrature phase shift keying (DQPSK) demodulator that employs silica-based planar lightwave circuit (PLC) technology. Silica-based PLC DQPSK demodulator has good characteristics including low polarization dependence, mass producibility, etc. However delay line interferometer (DLI) of demodulator had the large temperature dependence of its optical characteristics, so it required large power consumption to stabilize the chip temperature by the thermo-electric cooler (TEC). We previously made a quick report about an athermal DLI to reduce a power consumption by removing the TEC. In this paper, we focus on the details of the design and the fabrication method we used to achieve the athermal characteristics, and we describe the thermal stability of the signal demodulation and the reliability of our demodulator. We described two athermalization methods; the athermalization of the transmission spectrum and the athermalization of the polarization property. These methods were successfully demonstrated with keeping a high extinction ratio and a small footprint by introducing a novel interwoven DLI configuration. This configuration can also limit the degradation of the polarization dependent phase shift (PDf) to less than 1/10 that with the conventional configuration when the phase shifters on the waveguide are driven. We used our demodulator and examined its demodulation performance for a 43 Gbit/s DQPSK signal. We also verified its long-term reliability and thermal stability against the rapid temperature change. As a result, we confirmed that our athermal demodulator performed sufficiently well for use in DQPSK systems.

We propose a novel technique of matching at both ends of the guard trace to suppress resonance. This approach is derived from the viewpoint that the guard trace acts as a transmission line. We examined that matched termination suppresses guard-trace resonance through simulating a circuit and measuring radiation. We found from these results that the proposed method enables guard-trace voltages to remain low and hence avoids increases in radiation. In addition, we demonstrated that "matched termination at the far end of the guard trace" could suppress guard-trace resonance sufficiently at all frequencies. We eventually found that at least two vias at both ends of the guard trace and only one matching resistor at the far end could suppress guard-trace resonance. With respect to fewer vias, the method we propose has the advantage of reducing restrictions in the printed circuit board layout at the design stage.

In a differential transmission line, a large common-mode radiation is excited due to its asymmetry. In this paper, the imbalance difference model, which was proposed by the authors for estimation of common-mode radiation, is extended to apply to the differential signaling systems. The authors focus on a differential transmission line with asymmetric property, which consists of an adjacent return plane and two signal lines which are placed close to an edge of the return plane. Three orthogonal transmission modes, a normal mode, a primary common mode and a secondary common mode, are defined. Among these transmission modes, the secondary common mode is dominant in radiation, and a mechanism of the secondary common-mode generation is explained. The radiated emission which was calculated using the imbalance difference model was in good agreement with that obtained by full wave calculation.

In this paper, we propose a new differential MIMO single-carrier system with frequency-domain equalization (SC-FDE) aided by the insertion of cyclic prefix. This block transmission system not only inherits all the merits of the SISO SC-FDE system, but is also equipped with a differential space-time block coding (DSTBC) such as to combat the fast-changing frequency selective fading channels without the needs to estimate and then compensate the channel effects. Hence, for practical applications, it has the additional merits of decoding simplicity and robustness against high mobility transmission environments. Computer simulations show that the proposed system can provide diversity benefit as the non-differential system does, while greatly reducing the receiver complexity.

We propose a CMOS circuit that can be used as an equivalent to resistors. This circuit uses a simple differential pair with diode-connected MOSFETs and operates as a high-resistance resistor when driven in the subthreshold region of MOSFETs. Its resistance can be controlled in a range of 1-1000 MΩ by adjusting a tail current for the differential pair. The results of device fabrication with a 0.35-µm 2P-4M CMOS process technology is described. The resistance was 13 MΩ for a tail current of 10 nA and 135 MΩ for 1 nA. The chip area was 105 µm110 µm. Our resistor circuit is useful to construct many high-resistance resistors in a small chip area.

Differential-phase-shift (DPS) quantum key distribution (QKD) is one scheme of quantum key distribution whose security is based on the quantum nature of lightwave. This protocol features simplicity, a high key creation rate, and robustness against photon-number-splitting attacks. We describe DPS-QKD in this paper, including its setup and operation, eavesdropping against DPS-QKD, system performance, and modified systems to improve the system performance.

In this paper, we propose a file replication method to achieve load balancing in terms of write access to storage device ("write storage access load balancing" for short) in unstructured peer-to-peer (P2P) file-sharing networks in which the popularity trend of queried files varies dynamically. The proposed method uses a write storage access ratio as a load balance index value in order to stabilize dynamic P2P file-sharing environments adaptively. In the proposed method, each peer autonomously controls the file replication ratio, which is defined as a probability to create the replica of the file in order to uniform write storage access loads in the similar way to thermal diffusion phenomena. Theoretical analysis results show that the behavior of the proposed method actually has an analogy to a thermal diffusion equation. In addition, simulation results reveal that the proposed method has an ability to realize write storage access load balancing in the dynamic P2P file-sharing environments.

Due to the development and popularization of high-definition televisions, digital video cameras, Blu-ray discs, digital broadcasting, IP television and so on, it plays an important role to identify and quantify video quality degradations. In this paper, we propose SV-CIELAB which is an objective video quality assessment (VQA) method using a spatio-velocity contrast sensitivity function (SV-CSF). In SV-CIELAB, motion information in videos is effectively utilized for filtering unnecessary information in the spatial frequency domain. As the filter to apply videos, we used the SV-CSF. It is a modulation transfer function of the human visual system, and consists of the relationship among contrast sensitivities, spatial frequencies and velocities of perceived stimuli. In the filtering process, the SV-CSF cannot be directly applied in the spatial frequency domain because spatial coordinate information is required when using velocity information. For filtering by the SV-CSF, we obtain video frames separated in spatial frequency domain. By using velocity information, the separated frames with limited spatial frequencies are weighted by contrast sensitivities in the SV-CSF model. In SV-CIELAB, the criteria are obtained by calculating image differences between filtered original and distorted videos. For the validation of SV-CIELAB, subjective evaluation experiments were conducted. The subjective experimental results were compared with SV-CIELAB and the conventional VQA methods such as CIELAB color difference, Spatial-CIELAB, signal to noise ratio and so on. From the experimental results, it was shown that SV-CIELAB is a more efficient VQA method than the conventional methods.

We propose a new speech enhancement method suitable for mobile devices used in the presence of various types of noise. In order to achieve high-performance speech recognition and auditory perception in mobile devices, various types of noise have to be removed under the constraints of a space-saving microphone arrangement and few computational resources. The proposed method can reduce both the directional noise and the diffuse noise under the abovementioned constraints for mobile devices by employing a square microphone array and conducting low-computational-cost processing that consists of multiple null beamforming, minimum power channel selection, and Wiener filtering. The effectiveness of the proposed method is experimentally verified in terms of speech recognition accuracy and speech quality when both the directional noise and the diffuse noise are observed simultaneously; this method reduces the number of word errors and improves the log-spectral distances as compared to conventional methods.

This paper is in response to the report of Ahn, Mun, Kim, Oh, and Han published in IEICE Trans. INF. & SYST., Vol.E91-D, No.4, 2008, 1215-1217. They tried to extend their previous paper that published on IEICE Trans. INF. & SYST., Vol.E86-D, No.12, 2003, 2790-2793. However, we will point out that their extension is based on the detailed data of knowing the frequency of three types. Their new occurrence information based on intuitionistic fuzzy set for medical diagnosis of headache becomes redundant. We advise researchers to directly use the detailed data to decide the diagnosis of headache.

A multiple-peak negative differential resistance (NDR) circuit made of standard Si-based metal-oxide-semiconductor field-effect-transistor (MOS) and SiGe-based heterojunction bipolar transistor (HBT) is demonstrated. We can obtain a three-peak I-V curve by connecting three cascoded MOS-HBT-NDR circuits by suitably designing the MOS parameters. This novel three-peak NDR circuit possesses the adjustable current-voltage characteristics and high peak-to-valley current ratio (PVCR). We can adjust the PVCR values to be as high as 11.5, 6.5, and 10.3 for three peaks, respectively. Because the NDR circuit is a very strong nonlinear element, we discuss the extrinsic hysteresis phenomena in this multiple-peak NDR circuit. The effect of series resistance on hysteresis phenomena is also investigated. Our design and fabrication of the NDR circuit is based on the standard 0.35 µm SiGe BiCMOS process.

This paper proposes a technique for detecting the occurrences of refactoring from source code revisions. In a real software development process, a refactoring operation may sometimes be performed together with other modifications at the same revision. This means that detecting refactorings from the differences between two versions stored in a software version archive is not usually an easy process. In order to detect these impure refactorings, we model the detection within a graph search. Our technique considers a version of a program as a state and a refactoring as a transition between two states. It then searches for the path that approaches from the initial to the final state. To improve the efficiency of the search, we use the source code differences between the current and the final state for choosing the candidates of refactoring to be applied next and estimating the heuristic distance to the final state. Through case studies, we show that our approach is feasible to detect combinations of refactorings.

This paper describes diffusion of electric vehicles and novel social infrastructure from the viewpoint of systems innovation theory considering both human society aspects and elemental technological aspects. Firstly, fundamentals of the systems innovation theory and the platform theory are mentioned. Secondly, discussion on mobility from the viewpoint of the human-society layer and discussion of electrical vehicles from the viewpoint of the elemental techniques are carried out. Thirdly, based on those, R & D, measures are argued such as establishment of the ubiquitous noncontact feeding and authentication payment system is important. Finally, it is also insisted that after the establishment of this system the super smart grid with temporal and spatial control including demand itself with the low social cost will be expected.

In this paper we propose a file replication scheme inspired by a thermal diffusion phenomenon for storage load balancing in unstructured peer-to-peer (P2P) file sharing networks. The proposed scheme is designed such that the storage utilization ratios of peers will be uniform, in the same way that the temperature in a field becomes uniform in a thermal diffusion phenomenon. The proposed scheme creates replicas of files in peers probabilistically, where the probability is controlled by using parameters that can be used to find the trade-off between storage load balancing and search performance in unstructured P2P file sharing networks. First, we show through theoretical analysis that the statistical behavior of the storage load balancing controlled by the proposed scheme has an analogy with the thermal diffusion phenomenon. We then show through simulation that the proposed scheme not only has superior performance with respect to balancing the storage load among peers (the primary objective of the present proposal) but also allows the performance trade-off to be widely found. Finally, we qualitatively discuss a guideline for setting the parameter values in order to widely find the performance trade-off from the simulation results.

This letter presents the design and analysis of phase noise optimization of a 4-GHz differential Colpitts voltage-controlled-oscillator (VCO). A low phase noise is achieved by a Colpitts oscillator and a VCO bias optimization using an amplitude control method. The measured phase noise is -134.8 dBc/Hz at 1.25 MHz offset frequency from 4 GHz operating frequency. The VCO is implemented using 0.24 µm SiGe BiCMOS process with integrated copper inductors. The wide VCO frequency range covers both PCS and IMT bands and draws about 15.9 mA from a 2.7 V power supply.

This paper presents a Time Difference Amplifier (TDA) that amplifies the input time difference into the output time difference. Cross coupled chains of variable delay cells with the same number of stages are applicable for TDA, and the gain is adjusted via the closed-loop control. The TDA was fabricated using 65 nm CMOS and the measurement results show that the time difference gain is 4.78 at a nominal power supply while the designed gain is 4.0. The gain is stable enough to be less than 1.4% gain shift under 10% power supply voltage fluctuation.

We consider a single-link multi-source network with FAST TCP sources. We adopt a continuous-time dynamic model for FAST TCP sources, and propose a static model to adequately describe the queuing delay dynamics at the link. The proposed model turns out to have a structure that reveals the time-varying network feedback delay, which allows us to analyze FAST TCP with due consideration of the time-varying network feedback delay. Based on the proposed model, we establish sufficient conditions for the boundedness of congestion window of each source and for the global asymptotic stability. The asymptotic stability condition shows that the stability property of each source is affected by all other sources sharing the link. Simulation results illustrate the validity of the sufficient condition for the global asymptotic stability.