We investigated effect of annealing after rubbing by grazing incidence X-ray diffraction, since annealing process is performed in the actual process of liquid crystal display (LCD) fabrication. It was found that rubbed surface polymers were highly crystallized by annealing at 250 after rubbing, and that the crystallization of surface polymers by annealing occurred in the aligned polymer region induced by rubbing. Crystallization of surface polymers by annealing increasingly occurred as increasing of rubbing strength. Thus, it is considered that annealing process after rubbing should also play an important role to control liquid crystal alignment in LCD.

In this paper, we investigate the smallest value of p for which a (J,L,p)-QC LDPC code with girth 6 exists for J=3 and J=4. For J=3, we determine the smallest value of p for any L. For J=4, we determine the smallest value of p for L ≤ 301. Furthermore we provide examples of specific constructions meeting these smallest values of p.

By using multiple repeated signal replicas to formulate the accumulative observed noisy signal sequence (AONSS) or the differential observed noisy signal sequence (DONSS) in the hybrid ARQ system, a novel data-aided maximum likelihood (DA ML) SNR estimation and a blind ML SNR estimation technique are proposed for the AWGN channel. It is revealed that the conventional DA ML estimate is a special case of the novel DA ML estimate, and both the proposed DA ML and the proposed blind ML SNR estimation techniques can offer satisfactory SNR estimation without introducing significant additional complexity to the existing hybrid ARQ scheme. Based on the AONSS, both the generalized deterministic and the random Cramer-Rao lower bounds (GCRLBs), which include the traditional Cramer-Rao lower bounds (CRLBs) as special cases, are also derived. Finally, the applicability of the proposed SNR estimation techniques based on the AONSS and the DONSS are validated through numerical analysis and simulation results.

IEEE 802.15.4 is a new standard, uniquely designed for low rate wireless personal area networks (LR-WPANs). It targets ultra-low complexity, cost, and power, for low-data-rate wireless connectivity. However, one of the main problems of this new standard is its insufficient, and inefficient, media access control (MAC) for priority data. This paper introduces an extended contention access period (XCAP) concept for priority packets, also an traffic adaptive contention differentiation utilizing the XCAP (TACDX). The TACDX determines appropriate transmission policy alternatively according to the traffic conditions and type of packet. TACDX achieves not only enhanced transmission for priority packets but it also has a high energy efficiency for the overall network. The proposed TACDX is verified with simulations to measure the performances.

When TCP operates in multi-hop wireless networks, it suffers from severe performance degradation. This is because TCP reacts to wireless packet losses by unnecessarily decreasing its sending rate. Although previous loss differentiation algorithms (LDAs) can identify some of the packet losses due to wireless transmission errors as wireless losses, their accuracy is not high as much as we expect, and these schemes cannot avoid sacrificing the accuracy of congestion loss discrimination by misclassifying congestion losses as wireless losses. In this paper, we suggest a new end-to-end loss differentiation scheme which has high accuracy in both wireless loss discrimination and congestion loss discrimination. Our scheme estimates the rate of queue usage using information available to TCP. If the estimated queue usage is larger than 50% when a packet is lost, our scheme diagnoses the packet loss as congestion losses. Otherwise, it diagnoses the packet loss as wireless losses. Because the estimated queue usage is highly correlated to congestion, our scheme has an advantage to more exactly identify packet losses related to congestion and those unrelated to congestion. Through extensive simulations, we compare and evaluate our scheme with previous LDAs in terms of correlation, accuracy, and stability. And the results show that our scheme has the highest accuracy as well as its accuracy is more reliable than the other LDAs.

Bessel beams are a family of diffraction-free beams. They have many unique properties and prospective applications. Much attention has been focused to this subject in optics. Recently, the studies of such beams at mm- and submm- wavebands have been carried out in our group. The investigation results, including their theories, generation, propagation and potential applications, are presented in this paper.

The purpose of this paper is to investigate the possible impact of cellular phones' signals on implantable cardiac pacemakers in elevators. This is achieved by carrying out precise numerical simulations based on the Finite-Difference-Time-Domain method to examine the electromagnetic fields in elevator models. In order to examine the realistic and complicated situations where humans are present in the elevator, we apply the realistic homogeneous human phantom and cellular radios operating in the frequency bands 800 MHz, 1.5 GHz and 2 GHz. These computed results of field strength inside the elevator are compared with a certain reference level determined from the experimentally obtained maximum interference distance of implantable cardiac pacemakers. This enables us to carry out a quantitative evaluation of the EMI risk to pacemakers by cellular radio transmission. The results show that for the case when up to 5 mobile radio users are present in the elevator model used, there is no likelihood of pacemaker malfunction for the frequency bands 800 MHz, 1.5 GHz and 2 GHz.

An L-band 4-bit RL/RC-switched active phase shifter using differential switches is developed. It employs RL/RC circuits in the design of series feedback loops of the quadrature differential amplifier and achieves 90, 45, and 22.5of phase shift by switching on and off the RL/RC circuits alternatively. On the other hand, a 180phase shift is achieved with the use of a phase difference between the differential outputs. By cascading all four bits, an insertion gain of 16 to 23 dB, a phase error of less than 8.5, and an RMS phase error of 4.6have been achieved at 1 GHz.

The Finite-Difference Time-Domain (FDTD) technique is presented in this paper as an estimation method for radio propagation prediction in large and complex wireless local area network (WLAN) environments. Its validity is shown by comparing measurements and Ray-trace method with FDTD data. The 2 GHz (802.11b/g) and 5 GHz (802.11a) frequency bands are used in both the calculations and experiments. The electric field (E-field) strength distribution has been illustrated in the form of histograms and cumulative ratio graphs. By using the FDTD method to vary the number of human bodies in the environment, the effects on E-field distribution due to human body absorption are also observed for 5 GHz WLAN design.

Multimedia traffic on the Internet is rapidly increasing with the advent of broadband networks. However, the Best-Effort (BE) service used with Internet Protocol (IP) networking was never intended to guarantee Quality of Service (QoS) for each user. Therefore, the realization of QoS guarantees has become a very important issue. Previously, we have proposed a queue management scheme, called Dual Metrics Fair Queuing (DMFQ), to improve fairness and to guarantee QoS. DMFQ improves fairness and throughput by considering the amount of instantaneous and historical network resources consumed per flow. In addition, DMFQ has characteristics of high speed and high scalability because it is hardware oriented. However, DMFQ may be unable to adapt to network fluctuations, given that it has static setup parameters. Moreover, DMFQ is unable to support a multiclass environment. In this paper, we propose a new buffer management scheme based on DMFQ that can adapt flexibly to network conditions and can provide classified services. The proposed scheme stabilizes buffer utilization within a fixed range by controlling the buffer threshold, which affects the calculated packet discard probability. Moreover, by applying the proposed scheme to Differentiated Services (DiffServ), we achieve prioritized buffer management.

One VLSI friendly fast motion estimation (ME) algorithm is proposed in this paper. Firstly, theoretical analysis shows that image rich of sharp edges and texture is regarded as high frequency abundant image and macroblocks (MBs) in such image will express large pixel difference. In our paper, we apply adaptive subsampling method during ME process based on pixel difference analysis, so the computation complexity of full pixel pattern can be reduced. Secondly, statistic analysis shows that for MBs with static feature, the ratio of selecting previous reference frame as best one is very high and multiple reference frame technique is not required for these MBs. Based on this analysis, we give out a block overlapping method to pick out static MBs and apply MRF elimination process. Thirdly, since many redundant search positions exist in MB with small motion trend and large search range is only contributive to MB with big motion, we extract motion feature after ME on first reference frame and use it to adjust search range for rest ME process. So, the computation complexity of redundant search positions is eliminated. Experimental results show that, compared with hardware friendly full search algorithm, our proposed algorithm can reduce 71.09% to 95.26% ME time with negligible video quality degradation. Moreover, our fast algorithm can be combined with existing fast ME algorithms like UMHexagon method for further reduction in complexity and it is friendly to hardware implementation.

The purpose of this paper is to study sender authenticated key agreements by a third party, which uses the received parameters to verify the fact that a sender of a message knows his long-term private key. In particular, we propose a standard model for the protocol among three entities for the first time. The security of this protocol depends on the difficulty of solving two new problems related to one-way isomorphisms and the decision co-bilinear Diffie-Hellman problem on multiplicative cyclic groups. It is the first time that the security of a key agreement has been formally proven by using negligible probability. We believe that our contribution gives many applications in the cryptographic community.

In the latest video coding frameworks, efficiency of motion vector (MV) coding is becoming increasingly important because of the growing bit rate portion of motion information. However, neither the conventional median predictor, nor the newer schemes such as the minimum bit rate prediction scheme and the hybrid scheme, can effectively eliminate the local redundancy of motion vectors. In this paper, we present the prioritized reference decision scheme for efficient motion vector coding, based on the H.264/AVC framework. This scheme makes use of a boolean indicator to specify whether the median predictor is to be used for the current MV or not. If not, the median prediction is considered not suitable for the current MV, and this information is used for refining the possible space of a group of reference MVs including 4 neighboring MVs and the zero MV. This group of MVs is organized to be a prioritized list so that the reference MV with highest priority is to be selected as the prediction value. Furthermore, the boolean indicators are coded into the modified code words of mb_type and sub_mb_type, so as to reduce the overhead. By applying the proposed scheme, the structure and the applicability problems with the state-of-the-art MBP scheme have been overcome. Experimental result shows that the proposed scheme achieves a considerable reduction of bits for MVDs, compared with the conventional median prediction algorithm. It also achieves a better and much stabler performance than MBP-based MV coding.

Synchronization poses a major challenge in ultra wideband (UWB) systems due to low signal duty cycles in UWB. This study develops an effective synchronization scheme for frame-differential IR-UWB receivers to improve the synchronization speed. The proposed parallel search mechanism reduces the search region of the symbol boundaries to only a single frame duration. Moreover, only one delay element is needed in each branch, since a shared looped delay-line (SLD) is also proposed to lower the implementation complexity of the parallel search mechanism. Simulations and performance analysis show that the proposed scheme achieves a lower mean square error and a higher probability of detection than other alternatives.

This paper describes the recent advances in semiconductor photodiodes for use in ultra-high-speed optical systems. We developed two types of waveguide photodiodes (WG-PD) -- an evanescently coupled waveguide photodiode (EC-WG-PD) and a separated-absorption-and-multiplication waveguide avalanche photodiode (WG-APD). The EC-WG-PD is very robust under high optical input operation because of its distribution of photo current density along the light propagation. The EC-WG-PD simultaneously exhibited a high external quantum efficiency of 70% for both 1310 and 1550 nm, and a wide bandwidth of more than 40 GHz. The WG-APD, on the other hand, has a wide bandwidth of 36.5 GHz and a gain-bandwidth product of 170 GHz as a result of its small waveguide mesa structure and a thin multiplication layer. Record high receiver sensitivity of -19.6 dBm at 40 Gbps was achieved. Additionally, a monolithically integrated dual EC-WG-PD for differential phase shift-keying (DPSK) systems was developed. Each PD has equivalent characteristics with 3-dB-down bandwidth of more than 40 GHz and external quantum efficiency of 70% at 1550 nm.

In this letter, a relay-assisted transmission scenario over frequency-selective fading channels perturbed by different random carrier frequency offsets is considered. OFDM and block-double differential (BDD) design are implemented to overcome the problem of intersymbol interference (ISI) and carrier frequency offsets (CFOs). We analyze the symbol error rate (SER) performance of decode-and-forward relaying with BDD design in wireless cooperative communications over frequency-selective fading channels and derive a theoretical upper bound for average SER when the relay (R) is error free. It can be seen from our analysis that the system performance is influenced by the ability of R to decode, and when R decodes without error, both spatial and multipath diversity can be obtained without requiring any knowledge of channel state information and CFO information at the receivers. Numerical examples are provided to corroborate our theoretical analysis.

In recent years, the space-time block coding (STBC) method has attracted attention to provide transmission diversity in mobile communication systems. Although the STBC method is very effective in slow fading environments, its performance in fast fading environments has yet to be clearly verified. In this paper we propose a railway radio communication system using space-time coding in cooperation with two base stations. Here, we considered the differential STBC (D-STBC) method in railway communication system to overcome difficulties caused by the fast fading environment. We have compared the performance of STBC and D-STBC method where there is frequency offset between two base stations. Moreover, we have presented the simulation result of overall performance of the system including frequency offset and transmission time delay when operating D-STBC method. The overall evaluation on this paper shows that the D-STBC method is suitable for realizing highly reliable railway communication systems.

This paper presents a 1 V operating fully differential OTA using NMOS inverters in place of the traditional differential pair. To obtain high gain, a two-stage configuration is used in which the first stage has feedforward paths to cancel the common-mode signal, and the second stage has common-mode feedback paths to stabilize the output common-mode voltage. The proposed OTA was fabricated by an 0.18 µm CMOS technology. Measured gain is 40 dB and GBW is 10 MHz, in addition to differential output voltage swing of 1.8 Vp - p. It is confirmed that the proposed OTA can operate from 1 V power supply and has very large output swing capability even in a 1 V operation. The proposed OTA configuration contributes to a solution to the low power supply voltage issue in scaled CMOS analog circuits.

Printed circuit boards (PCBs) driven by a connected feed cable are considered to be one of the main sources of the electromagnetic interference (EMI) from electronic devices. In this paper, a method for predicting the electromagnetic (EM) radiation from a PCB driven by a connected feed cable at up to gigahertz frequencies is proposed and demonstrated. The predictive model is based on the transmission line theory and current- and voltage-driven CM generation mechanisms with consideration of antenna impedance. Frequency responses of differential-mode (DM) and common-mode (CM) currents and far-electric field were investigated experimentally and with finite-difference time-domain (FDTD) modeling. First, the dominant component in total EM radiation from the PCB was identified by using the Source-Path-Antenna model. Although CM can dominate the total radiation at lower frequencies, DM is the dominant component above 3 GHz. Second, the method for predicting CM component at lower frequencies is proposed. And its validity was discussed by comparing FDTD calculated and measured results. Specifically, the relationship between the CM current and the terminating resistor was focused as important consequence for the prediction. Good agreement between the measured and predicted results shows the validity of the predicted results. The proposed model can predict CM current with sufficient accuracy, and also identify the primary coupling-mechanism of CM generation. Then far-electric field was predicted by using the proposed method, and it was demonstrated that outline of the frequency response of the undesired EM radiation from the PCB driven by the connected feed cable can be predicted with engineering accuracy (within 6 dB) up to 18 GHz. Finally, as example of application of equivalent circuit model to EMC design, effect of the width of the ground plane was predicted and discussed. The equivalent circuit model provides enough flexibility for different geometrical parameters and increases our ability to provide insights and design guidelines.

Placing a guard trace next to a signal line is the conventional technique for reducing the common-mode radiation from a printed circuit board. In this paper, the suppression of common-mode radiation from printed circuit boards having guard traces is estimated and evaluated using the imbalance difference model, which was proposed by the authors. To reduce common-mode radiation further, a procedure for designing a transmission line with guard traces is proposed. Guard traces connected to a return plane through vias are placed near a signal line and they decrease a current division factor (CDF). The CDF represents the degree of imbalance of a transmission line, and a common-mode electromotive force depends on the CDF. Thus, by calculating the CDF, we can estimate the reduction in common-mode radiation. It is reduced not only by placing guard traces, but also by narrowing the signal line to compensate for the variation in characteristic impedance due to the guard traces. Experimental results showed that the maximum reduction in common-mode radiation was about 14 dB achieved by placing guard traces on both sides of the signal line, and the calculated reduction agreed with the measured one within 1 dB. According to the CDF and characteristic impedance calculations, common-mode radiation can be reduced by about 25 dB while keeping the characteristic impedance constant by changing the gap between the signal line and the guard trace and by narrowing the width of the signal line.