In this work, fluctuation patterns of ReRAM current are classified automatically by proposed fluctuation pattern classifier (FPC). FPC is trained with artificially created dataset to overcome the difficulties of measured current signals, including the annotation cost and imbalanced data amount. Using FPC, fluctuation occurrence under different write conditions is analyzed for both HRS and LRS current. Based on the measurement and classification results, physical models of fluctuations are established.

Recently, complex orthogonal variable spreading factor (OVSF) codes based on polyphase orthogonal codes have been proposed to support multi-user/multi-rate data transmission services in synchronous direct-sequence code-division multiple access (DS-CDMA) systems. This study investigates the low signal-envelope fluctuation property of the complex OVSF codes in terms of transmission signal trajectories. In addition, a new method is proposed to suppress the envelope fluctuation more strongly at the expense of reducing the number of spreading sequences of the codes.

In this paper, we proposed the phase disturbing device using randomly-fluctuated liquid crystal (LC) alignment to reduce the speckle noise generated in holographic displays. Some parameters corresponding to the alignment fluctuation of thick LC layer were quantitatively evaluated, and we clarified the effect of the LC alignment fluctuation with the parameters on speckle noise reduction.

A new software based in-situ training (SBIST) method to achieve high accuracies is proposed for binarized neural networks inference accelerator chips in which measured offsets in sense amplifiers (activation binarizers) are transformed into biases in the training software. To expedite this individual training, the initial values for the weights are taken from results of a common forming training process which is conducted in advance by using the offset fluctuation distribution averaged over the fabrication line. SPICE simulation inference results for the accelerator predict that the accuracy recovers to higher than 90% even when the amplifier offset is as large as 40mV only after a few epochs of the individual training.

This paper proposes statistical analysis of phase-only correlation (POC) functions under the phase fluctuation of signals due to additive Gaussian noise. We derive probability density function of phase-spectrum differences between original signal and its noise-corrupted signal with additive Gaussian noise. Furthermore, we evaluate the expectation and variance of the POC functions between these two signals. As the variance of Gaussian noise increases, the expectation of the peak of the POC function monotonically decreases and variance of the POC function monotonically increases. These results mathematically guarantee the validity of the POC functions used for similarity measure in matching techniques.

The authors have been investigating the deterioration process of Au-plated slip-ring and Ag-Pd brush system with lubricant to realize stable and long lifetime. Through the past tests, it can be made clear that lubricant is very important for long lifetime, and a simple model of the deterioration process was proposed. However, it is still an issue how the lubricant is deteriorated and also what the relation between lubricant deterioration and contact voltage behavior is. In this paper, the contact voltage waveforms were regularly recorded during the test, and analyzed to obtain the time change of peak voltage and standard deviation during one rotation. Based on these results, it is discussed what happens at the interface between ring and brush with the lubricant. And the following results are made clear. The fluctuation of voltage waveforms, especially peaks of pulse-like fluctuation more easily occurs for minus rings than for plus rings. Further, peak values of the pulse-like fluctuation rapidly decreases and disappear at lower rotation speed as mentioned in the previous works. In addition, each peaks of the pulse-like fluctuation is identified at each position of the ring periphery. From these results, it can be assumed that lubricant film exists between brush and ring surface and electric conduction is realized by tunnel effect. In other words, it can be made clear that the fluctuation would be caused by the lubricant layer, not only by the ring surface. Finally, an electric conduction model is proposed and the above results can be explained by this model.

In recent years, deep neural network (DNN) has achieved considerable results on many artificial intelligence tasks, e.g. natural language processing. However, the computation complexity of DNN is extremely high. Furthermore, the performance of traditional von Neumann computing architecture has been slowing down due to the memory wall problem. Processing in memory (PIM), which places computation within memory and reduces the data movement, breaks the memory wall. ReRAM PIM is thought to be a available architecture for DNN accelerators. In this work, a novel design of ReRAM neuromorphic system is proposed to process DNN fully in array efficiently. The binary ReRAM array is composed of 2T2R storage cells and current mirror sense amplifiers. A dummy BL reference scheme is proposed for reference voltage generation. A binary DNN (BDNN) model is then constructed and optimized on MNIST dataset. The model reaches a validation accuracy of 96.33% and is deployed to the ReRAM PIM system. Co-design model optimization method between hardware device and software algorithm is proposed with the idea of utilizing hardware variance information as uncertainness in optimization procedure. This method is analyzed to achieve feasible hardware design and generalizable model. Deployed with such co-design model, ReRAM array processes DNN with high robustness against fabrication fluctuation.

Periodic interference frequently affects the measurement of small signals and causes problems in clinical diagnostics. Adaptive filters can be used as potential tools for cancelling such interference. However, when the interference has a frequency fluctuation, the ideal adaptive-filter coefficients for cancelling the interference also fluctuate. When the adaptation property of the algorithm is slow compared with the frequency fluctuation, the interference-cancelling performance is degraded. However, if the adaptation is too quick, the performance is degraded owing to the target signal. To overcome this problem, we propose an adaptive filter that suppresses the fluctuation of the ideal coefficients by utilizing a $rac{pi}{2}$ phase-delay device. This method assumes a frequency response that characterizes the transmission path from the interference source to the main input signal to be sufficiently smooth. In the numerical examples, the proposed method exhibits good performance in the presence of a frequency fluctuation when the forgetting factor is large. Moreover, we show that the proposed method reduces the calculation cost.

In recent years, wireless power transfer has been attracting a great deal of attention. In order to realize efficient power transfer, it is necessary to communicate data such as a frequency, required power, or error tolerance. In the proposed system, because of the use of the same antennas for power transmission and data transmission, the frequency response of a channel for the data transmission changes owing to load fluctuation and the distance between antennas. This paper investigates data transmission performance in the wireless power transfer system with frequency response estimation at the transmitter side. The numerical results obtained through computer simulation show that the proposed scheme can estimate the frequency response of the channel and the difference between the expected bit error rate (BER) and the BER with the estimation error is less than 0.5dB at the BER of 10-3.

In this paper, the Quality of Experience (QoE) on Dynamic Adaptive Streaming based on HTTP (DASH) is researched. To study users' experience on DASH, extensive subjective tests are firstly designed and conducted, based on which, we research QoE enhancement in DASH and find that DASH ensures more fluent playback (less stall) than constant bitrate (CBR) streaming to promote users' satisfaction especially in mobile networks. Then we adopt two-way analysis of variance (ANOVA) tests in statistics to identify the effect of specific factors (segment bitrate, bitrate fluctuation pattern, and bitrate switching) that impair users' experience on DASH. The impairment functions are then derived for these influence factors based on the Primacy and Recency Effect, a psychological phenomenon that has been proved to exist in users' experience on DASH in this paper. And the final QoE evaluation model is proposed to provide high correlation assessment for QoE of DASH. The good performance of our QoE model is validated by the subjective tests. In addition, our QoE study on DASH is also applied for QoE management to propose a QoE-based bitrate adaptation strategy, which promotes users' experience on DASH more strongly than the strategy based on QoS.

Cloud computing, a novel distributed paradigm to provide powerful computing capabilities, is usually adopted by developers and researchers to execute complicated IoT applications such as complex workflows. In this scenario, it is fundamentally important to make an effective and efficient workflow application scheduling and execution by fully utilizing the advantages of the cloud (as virtualization and elastic services). However, in the current stage, there is relatively few research for workflow scheduling in cloud environment, where they usually just bring the traditional methods directly into cloud. Without considering the features of cloud, it may raise two kinds of problems: (1) The traditional methods mainly focus on static resource provision, which will cause the waste of resources; (2) They usually ignore the performance fluctuation of virtual machines on the physical machines, therefore it will lead to the estimation error of task execution time. To address these problems, a novel mechanism which can estimate the probability distribution of subtask execution time based on background VM load series over physical machines is proposed. An elastic performance fluctuations-aware stochastic scheduling algorithm is introduced in this paper. The experiments show that our proposed algorithm can outperform the existing algorithms in several metrics and can relieve the influence of performance fluctuations brought by the dynamic nature of cloud.

Since electromagnetic (EM) noise resulting from an arc discharge disturbs other electric devices, parameters on electromagnetic compatibility, as well as lifetime and reliability, are important properties for electrical contacts. To clarify the characteristics and the mechanism of the generation of the EM noise, the arc column and voltage fluctuations generated by slowly breaking contacts with external direct current (DC) magnetic field, up to 20,mT, was investigated experimentally using Ag$_{90.7{ m wt%}}$SnO$_{2,9.3{ m wt}%}$ material. Firstly the motion of the arc column is measured by high-speed camera. Secondary, the distribution of the motion of the arc and contact voltage are discussed. It was revealed that the contact voltage fluctuation in the arc duration is related to the arc column motion.

Active measurement is an end-to-end measurement technique that can estimate network performance. The active measurement techniques of PASTA-based probing and periodic-probing are widely used. However, for the active measurement of delay and loss, Baccelli et al. reported that there are many other probing policies that can achieve appropriate estimation if we can assume the non-intrusive context (the load of the probe packets is ignored in the non-intrusive context). While the best policy in terms of accuracy is periodic-probing with fixed interval, it suffers from the phase-lock phenomenon created by synchronization with network congestion. The important point in avoiding the phase-lock phenomenon is to shift the cycle of the probe packet injection by adding fluctuations. In this paper, we analyse the optimal magnitude of fluctuations corresponding to the given autocovariance function of the target process. Moreover, we introduce some evaluation examples to provide guidance on designing experiments to network researchers and practitioners. The examples yield insights on the relationships among measurement parameters, network parameters, and the optimal fluctuation magnitude.

This paper deals with reflection and transmission of a TE plane wave from a one-dimensional random slab with slanted fluctuation by means of the stochastic functional approach. By starting with a generalized representation of the random wavefield from a two-dimensional random slab, and by using a manner for slanted anisotropic fluctuation, the corresponding random wavefield representation and its statistical quantities for one-dimensional cases are newly derived. The first-order incoherent scattering cross section is numerically calculated and illustrated in figures.

The circuit switching device by the electrical contact needs the high reliability and long lifetime. The very important factor for the high reliability, long lifetime and electromagnetic noise of the electrical contact is to suppress the duration and electromagnetic noise of arc discharge. Usually, the suppression of arc duration method is applying the external magnetic field. But, this method was not able to suppress the metallic arc duration and increased the voltage fluctuation at arc duration. Therefore, the new method for suppressing the duration and noise for electrical contact is expected. In this paper, a new method for suppressing duration and EM noise of arc discharge by applying housing pressure is proposed. To investigate the availability of proposed method, the measurement and some considerations on arc duration, voltage-fluctuation and current noise up to GHz frequency band generated by breaking contact in the applied pressure relay housing are reported. Firstly, voltage waveform and duration of the arc are measured. The effects of the pressure in the relay housing on the duration of the metallic and gaseous phase arcs are discussed. Secondary, voltage fluctuation, the spectrogram of contact voltage and current noise up to GHz frequency band are discussed. In the results, the proposed method with applying pressure makes shorter both durations of metallic and gaseous phases. The shorter duration of metallic phase is an advantage of the proposed method beyond the applying external magnetic field. As the housing pressure is increase, the voltage fluctuation and current noise becomes smalls. The proposed method can suppress the voltage fluctuation as well as arc duration. Consequently, the proposed method is on of the good solution to suppress the duration and electromagnetic noise of the arc discharge from electrical contact and result of this study indicates the basic considerations necessary to ensure good lifetime and EMC designs for electrical contacts.

The traffic adaptive 2-level active period control has been proposed as a traffic adaptation mechanism to handle temporal and spatial (geographical) traffic fluctuations in cluster-based wireless sensor networks (WSNs) employing IEEE802.15.4 medium access control (MAC). This paper proposes a traffic adaptive distributed backoff control mechanism for cluster-based WSNs with the traffic adaptive 2-level active period control to enhance the system performance, especially transmission performance. The proposed mechanism autonomously adjusts the starting time of the backoff procedure for channel accesses in the contention access period (CAP) specified by the IEEE802.15.4 MAC, and then distributes the channel access timing over a wide range within the CAP, which can mitigate channel access congestion. The results of computer simulations show that the proposed mechanism can improve the transmission delay performance while keeping the enhancement in throughput and energy consumption at the cluster-based WSNs under non-uniform traffic environments.

As MOS transistors are scaled down, the impact of randomly placed discrete charge (impurity atoms, traps and surface states) on device characteristics rapidly increases. Significant variability caused by random dopant fluctuation (RDF) is a direct result of this, which urges the adoption of new device architectures (ultra-thin body SOI FETs and FinFETs) which do not use impurity for body doping. Variability caused by traps and surface states, such as random telegraph noise (RTN), though less significant than RDF today, will soon be a major problem. The increased complexity of such residual-charge-induced variability due to non-Gaussian and time-dependent behavior will necessitate new approaches for variation-aware design.

In this paper, a theoretical analysis of current-controlled (CC-) MOS current mode logic (MCML) is reported. Furthermore, the circuit performance of the CC-MCML with the auto-detection of threshold voltage (Vth) fluctuation is evaluated. The proposed CC-MCML with the auto-detection of Vth fluctuation automatically suppresses the degradation of circuit performance induced by the Vth fluctuations of the transistors automatically, by detecting these fluctuations. When a Vth fluctuation of ± 0.1 V occurs on the circuit, the cutoff frequency of the circuit is increased from 0 Hz to 3.5 GHz by using the proposed CC-MCML with the auto-detection of Vth fluctuation.

This paper reports on a theoretical study and modeling of a 1.55 µm quantum dot heterostructure laser using InN as a promising candidate for the first time. Details of design and theoretical analysis of probability distribution of the optical transition energy, threshold current density, modal gain, and differential quantum efficiency are presented considering a single layer of quantum dots. Dependence of threshold current density on the RMS value of quantum dot size fluctuations and the cavity length is studied. A low threshold current density of ∼51 Acm-2 is achieved at room temperature for a cavity length of 640 µm. An external differential efficiency of ∼65% and a modal gain of ∼12.5 cm-1 are obtained for the proposed structure. The results indicate that the InN based quantum dot laser is a promising one for the optical communication system.

This paper deals with reflection and transmission of a TE plane wave from a two-dimensional random slab with slanted fluctuation by means of the stochastic functional approach. Such slanted fluctuation of the random slab is written by a homogeneous random field having a power spectrum with a rotation angle. By starting with the previous paper [IEICE Trans. Electron., Vol. E92-C, no.1, pp.77–84, January 2009], any statistical quantities are immediately obtained even for slanted fluctuation cases. The first-order incoherent scattering cross section is numerically calculated and illustrated in figures. It is then newly found that shift and separation phenomena of the leading or enhanced peaks at four characteristic scattering angles take place in the transmission and reflection sides, respectively.