In this letter, we propose an algorithm for the 2-dimensional (2D) direction of arrival (DOA) estimation of noncircular coherently distributed (CD) sources using the centrosymmetric array. For a centrosymmetric array, we prove that the angular signal distributed weight (ASDW) vector of the CD source has a symmetric structure. To estimate azimuth and elevation angle, we perform a 2D searching based on generalized ESPRIT algorithm. The significant superiority of the proposed algorithm is that, the 2D central directions of CD sources can be found independently of deterministic angular distributed function (DADF). Simulations results verify the efficacy of the proposed algorithm.

An interference-aware dynamic channel assignment scheme is proposed with consideration of co-tier interference for the downlink of an OFDMA/FDD based dense small-cell network. The proposed scheme adaptively assigns subchannels to the small-cell user equipment (SUE) according to the given traffic load and interference effect from neighbor small-cell access points. The simulation results show that the proposed scheme outperforms the other schemes based on the graph coloring algorithm in terms of the mean SUE capacity.

In this paper, we study the degrees of freedom (DoF) of a multiple-input multiple-output (MIMO) multiway relay channel (mRC) with two relays, two clusters and K (K≥3) users per cluster. We consider a clustered full data exchange model, i.e., each user in a cluster sends a multicast (common) message to all other users in the same cluster and desires to acquire all messages from them. The DoF results of the mRC with the single relay have been reported. However, the DoF achievability of the mRC with multiple relays is still an open problem. Furthermore, we consider a more practical scenario where no channel state information at the transmitter (CSIT) is available to each user. We first give a DoF cut-set upper bound of the considered mRC. Then, we propose a distributed interference neutralization and retransmission scheme (DINR) to approach the DoF cut-set upper bound. In the absence of user cooperation, this method focuses on the beamforming matrix design at each relay. By investigating channel state information (CSI) acquisition, we show that the DINR scheme can be performed by distributed processing. Theoretical analyses and numerical simulations show that the DoF cut-set upper bound can be attained by the DINR scheme. It is shown that the DINR scheme can provide significant DoF gain over the conventional time division multiple access (TDMA) scheme. In addition, we show that the DINR scheme is superior to the existing single relay schemes for the considered mRC.

In this paper, we propose two secure multiuser multiple-input multiple-output (MIMO) transmission approaches based on interference alignment (IA) in the presence of an eavesdropper. To deal with the information leakage to the eavesdropper as well as the interference signals from undesired transmitters (Txs) at desired receivers (Rxs), our approaches aim to design the transmit precoding and receive subspace matrices to minimize both the total inter-main-link interference and the wiretapped signals (WSs). The first proposed IA scheme focuses on aligning the WSs into proper subspaces while the second one imposes a new structure on the precoding matrices to force the WSs to zero. In each proposed IA scheme, the precoding matrices and the receive subspaces at the legitimate users are alternatively selected to minimize the cost function of a convex optimization problem for every iteration. We provide the feasible conditions and the proofs of convergence for both IA approaches. The simulation results indicate that our two IA approaches outperform the conventional IA algorithm in terms of the average secrecy sum rate.

The multiple assignment scheme is to assign one or more shares to single participant so that any kind of access structure can be realized by classical secret sharing schemes. We propose its quantum version including ramp secret sharing schemes. Then we propose an integer optimization approach to minimize the average share size.

In these days, we can see digital signages in many places, for example, inside stations or trains with the distribution of attractive promotional video clips. Users can easily get additional information related to such video clips via mobile devices such as smartphone by using some websites for retrieval. However, such retrieval is time-consuming and sometimes leads users to incorrect information. Therefore, it is desirable that the additional information can be directly obtained from the video clips. We implement a suitable digital watermarking method on smartphone to extract watermarks from video clips on signages in real-time. The experimental results show that the proposed method correctly extracts watermarks in a second on smartphone.

Multiple notch filters are used to suppress narrow-band or sinusoidal interferences in digital signals. In this paper, we propose a novel optimization design technique of an infinite impulse response (IIR) multiple notch filter. It is based on the Nelder-Mead simplex method. Firstly, the system function of the desired notch filter is constructed to form the objective function of the optimization technique. Secondly, the design parameters of the desired notch filter are optimized by Nelder-Mead simplex method. A weight function is also introduced to improve amplitude response of the notch filter. Thirdly, the convergence and amplitude response of the proposed technique are compared with other Nelder-Mead based design methods and the cascade-based design method. Finally, the practicability of the proposed notch filter design technique is demonstrated by some practical applications.

This paper presents a novel method for unsupervised segmentation of objects with large displacements in high speed video sequences. Our general framework introduces a new foreground object predicting method that finds object hypotheses by encoding both spatial and temporal features via a semantic motion signature scheme. More specifically, temporal cues of object hypotheses are captured by the motion signature proposed in this paper, which is derived from sparse saliency representation imposed on magnitude of optical flow field. We integrate semantic scores derived from deep networks with location priors that allows us to directly estimate appearance potentials of foreground hypotheses. A unified MRF energy functional is proposed to simultaneously incorporate the information from the motion signature and semantic prediction features. The functional enforces both spatial and temporal consistency and impose appearance constancy and spatio-temporal smoothness constraints directly on the object hypotheses. It inherently handles the challenges of segmenting ambiguous objects with large displacements in high speed videos. Our experiments on video object segmentation benchmarks demonstrate the effectiveness of the proposed method for segmenting high speed objects despite the complicated scene dynamics and large displacements.

An efficient balanced truncation for RC and RLC networks is presented in this paper. To accelerate the balanced truncation, sparse structures of original networks are considered. As a result, Lyapunov equations, the solutions of which are necessary for making the transformation matrices, are efficiently solved, and the reduced order models are efficiently obtained. It is proven that reciprocity of original networks is preserved while applying the proposed method. Passivity of the reduced RC networks is also guaranteed. In the illustrative examples, we will show that the proposed method is compatible with PRIMA in efficiency and is more accurate than PRIMA.

In the ordinary security model for signature schemes, we consider an adversary that tries to forge a signature on a new message using only his knowledge of other valid message and signature pairs. To take into account side channel attacks such as tampering or fault-injection attacks, Bellare and Kohno (Eurocrypt 2003) formalized related-key attacks (RKA), where stronger adversaries are considered. In the RKA security model for signature schemes, we consider an adversary that can also manipulate the signing key and obtain signatures computed under the modified key. RKA security is defined with respect to the related-key deriving functions which are used by an adversary to manipulate the signing key. This paper considers RKA security of three established signature schemes: the Schnorr signature scheme, a variant of DSA, and a variant of ElGamal signature scheme. First, we show that these signature schemes are secure against a weak notion of RKA with respect to polynomial functions. Second, we demonstrate that, on the other hand, none of the Schnorr signature scheme, DSA, nor the ElGamal signature scheme achieves the standard notion of RKA security with respect to linear functions, by showing concrete attacks on these. Lastly, we show that slight modifications of the Schnorr signature scheme, (the considered variant of) DSA, and the variant of ElGamal signature scheme yield fully RKA secure schemes with respect to polynomial functions.

We propose a new direction-of-arrival (DOA) estimation method of wideband signals. In several decades, many approaches to estimate DOA of wideband signal sources have been proposed. Test of orthogonality of projected subspaces (TOPS) and Squared TOPS are the estimation algorithms to realize high resolution performance of closely spaced signal sources. These methods, however, are not suitable for DOA estimation of multiple signal sources, because the spatial spectrum calculated by Squared TOPS has some false peaks. Therefore, the authors have proposed the weighted squared TOPS (WS-TOPS) to suppress these false peaks by modifying the orthogonality evaluation matrix, WS-TOPS also achieves better DOA estimation accuracy than that of Squared TOPS. On the other hand, WS-TOPS has a drawback, it requires high computational complexity. Our new method can realize good DOA estimation performance, which is better than that of Squared TOPS, with low computational complexity by reducing the size of orthogonality evaluation matrix and the number of subspaces to be used. Simulation results show that the new method can provide high resolution performance and high DOA estimation accuracy with low computational complexity.

The Even-Goldreich-Micali framework is a generic method for constructing secure digital signature schemes from weaker signature schemes and one-time signature schemes. Several variations are known due to properties demanded on the underlying building blocks. It is in particular interesting when the underlying signature scheme is a so-called F-signature scheme that admits different message spaces for signing and verification. In this paper we overview these variations in the literature and add a new one to the bucket.

Faster-than-Nyquist (FTN) signaling is investigated for quasi-static flat fading massive multiple-input multiple-output (MIMO) systems. In FTN signaling, pulse trains are sent at a symbol rate higher than the Nyquist rate to increase the transmission rate. As a result, inter-symbol interference occurs inevitably for flat fading channels. This paper assesses the information-theoretically achievable rate of MIMO FTN signaling based on the optimum joint equalization and multiuser detection. The replica method developed in statistical physics is used to evaluate the achievable rate in the large-system limit, where the dimensions of input and output signals tend to infinity at the same rate. An analytical expression of the achievable rate is derived for general modulation schemes in the large-system limit. It is shown that FTN signaling does not improve the channel capacity of massive MIMO systems, and that FTN signaling with quadrature phase-shift keying achieves the channel capacity for all signal-to-noise ratios as the symbol period tends to zero.

In synchronous LSI circuits, memory subsystems such as Flip-Flops and SRAMs are essential components and latches are the base elements of the common memory logics. In this paper, a stability analysis method for latches operating in a low voltage region is proposed. The butterfly curve of latches is a key for analyzing a retention failure of latches. This paper discusses a modeling method for retention stability and derives an analytical stability model for latches. The minimum supply voltage where the latches can operate with a certain yield can be accurately derived by a simple calculation using the proposed model. Monte-Carlo simulation targeting 65nm and 28nm process technology models demonstrates the accuracy and the validity of the proposed method. Measurement results obtained by a test chip fabricated in a 65nm process technology also demonstrate the validity. Based on the model, this paper shows some strategies for variation tolerant design of latches.

Since digital ICs are often designed and fabricated by third parties at any phases today, we must eliminate risks that malicious attackers may implement Hardware Trojans (HTs) on them. In particular, they can easily insert HTs during design phase. This paper proposes an HT rank which is a new quantitative analysis criterion against HTs at gate-level netlists. We have carefully analyzed all the gate-level netlists in Trust-HUB benchmark suite and found out several Trojan net features in them. Then we design the three types of Trojan points: feature point, count point, and location point. By assigning these points to every net and summing up them, we have the maximum Trojan point in a gate-level netlist. This point gives our HT rank. The HT rank can be calculated just by net features and we do not perform any logic simulation nor random test. When all the gate-level netlists in Trust-HUB, ISCAS85, ISCAS89 and ITC99 benchmark suites as well as several OpenCores designs, HT-free and HT-inserted AES netlists are ranked by our HT rank, we can completely distinguish HT-inserted ones (which HT rank is ten or more) from HT-free ones (which HT rank is nine or less). The HT rank is the world-first quantitative criterion which distinguishes HT-inserted netlists from HT-free ones in all the gate-level netlists in Trust-HUB, ISCAS85, ISCAS89, and ITC99.

In this paper, a discrete particle swarm optimization method is proposed to solve the multi-objective task assignment problem in distributed environment. The objectives of optimization include the makespan for task execution and the budget caused by resource occupation. A two-stage approach is designed as follows. In the first stage, several artificial particles are added into the initialized swarm to guide the search direction. In the second stage, we redefine the operators of the discrete PSO to implement addition, subtraction and multiplication. Besides, a fuzzy-cost-based elite selection is used to improve the computational efficiency. Evaluation shows that the proposed algorithm achieves Pareto improvement in comparison to the state-of-the-art algorithms.

Current signature-based antivirus solutions have three limitations such as the large volume of signature database, privacy preservation, and computation overheads of signature matching. In this paper, we propose LigeroAV, a light-weight, performance-enhanced antivirus, suitable for pervasive environments such as mobile phones. LigeroAV focuses on detecting MD5 signatures which are more than 90% of signatures. LigeroAV offloads matching computation in the cloud server with up-to-dated signature database while preserving privacy level using the Bloom filter.

Wireless Local Area Networks (WLANs) based on the IEEE 802.11 standard have been increasingly used. Access Points (APs) are being established in various public places, such as railway stations and airports, as well as private residences. Moreover, the rate of public WLAN services continues to increase. Throughput prediction of an AP in a multi-rate environment, i.e., predicting the amount of receipt data (including retransmission packets at an AP), is an important issue for wireless network design. Moreover, it is important to solve AP placement and selection problems. To realize the throughput prediction, we have proposed an AP throughput prediction method that considers terminal distribution. We compared the predicted throughput of the proposed method with a method that uses linear order computation and confirmed the performance of the proposed method, not by a network simulator but by the numerical computation. However, it is necessary to consider the impact of CSMA/CA in the MAC layer, because throughput is greatly influenced by frame collision. In this paper, we derive an effective transmission rate considering CSMA/CA and frame collision. We then compare the throughput obtained using the network simulator NS2 with a prediction value calculated by the proposed method. Simulation results show that the maximum relative error of the proposed method is approximately 6% and 15% for UDP and TCP, respectively, while that is approximately 17% and 21% in existing method.

Power analysis for IoT devices is strongly required to protect attacks from malicious attackers. It is also very important to reduce power consumption itself of IoT devices. In this paper, we propose a highly-adaptable and small-sized in-field power analyzer for low-power IoT devices. The proposed power analyzer has the following advantages: (A) The proposed power analyzer realizes signal-averaging noise reduction with synchronization signal lines and thus it can reduce wide frequency range of noises; (B) The proposed power analyzer partitions a long-term power analysis process into several analysis segments and measures voltages and currents of each analysis segment by using small amount of data memories. By combining these analysis segments, we can obtain long-term analysis results; (C) The proposed power analyzer has two amplifiers that amplify current signals adaptively depending on their magnitude. Hence maximum readable current can be increased with keeping minimum readable current small enough. Since all of (A), (B) and (C) do not require complicated mechanisms nor circuits, the proposed power analyzer is implemented on just a 2.5cm×3.3cm board, which is the smallest size among the other existing power analyzers for IoT devices. We have measured power and energy consumption of the AES encryption process on the IoT device and demonstrated that the proposed power analyzer has only up to 1.17% measurement errors compared to a high-precision oscilloscope.

This paper presents a scheme that digitally cancels the unwanted phase components generated by the transmitter's laser and the receiver's local oscillator laser; such components place a substantial limit on the performance of coherent transceivers monolithically integrated with lasers in a photonic integrated circuit (PIC). Our cancellation proposal adopts the orthogonal polarization approach to provide a reference that is uncorrelated with the data signal. We elaborate on the principle of our proposal and its digital signal processing (DSP) algorithm. Experiments on a VCSEL with a linewidth of approximately 300MHz verify that our proposal can overcome the inherent phase noise limitations indicated by simulations and experiments. Our cancellation algorithm in conjunction with CMA-based polarization control is demonstrated and evaluated to confirm the feasibility of our proposal. The achievement of greatly relaxed laser linewidth will offer a significant benefit in offsetting the technical and cost requirements of coherent transceiver PICs with lasers. Therefore, our cancellation proposal is an enabling technology for the successful deployment of future coherent-based passive optical network (PON) systems.