Content extraction from deep Web pages has received great attention in recent years. However, the increasingly complicated HTML structure of Web documents makes it more difficult to recognize the data records by only analyzing the HTML source code. In this paper, we propose a method named LTDE to extract data records from a deep Web page. Instead of analyzing the HTML source code, LTDE utilizes the visual features of data records in deep Web pages. A Web page is considered as a finite set of visual blocks. The data records are the visual blocks that have similar layout. We also propose a pattern recognizing method named layout tree to cluster the similar layout visual blocks. The weight of all clusters is calculated, and the visual blocks in the cluster that has the highest weight are chosen as the data records to be extracted. The experiment results show that LTDE has higher effectiveness and better robustness for Web data extraction compared to previous works.

This paper first reviews the state-of-the-art noise reduction methods and points out their vulnerability in noise reduction performance and speech quality, especially under the low signal-noise ratios (SNR) environments. Then this paper presents an improved perceptual multiband spectral subtraction (MBSS) noise reduction algorithm (NRA) and a novel robust voice activity detection (VAD) based on the amended sub-band SNR. The proposed SNR-based VAD can considerably increase the accuracy of discrimination between noise and speech frame. The simulation results show that the proposed NRA has better segmental SNR (segSNR) and perceptual evaluation of speech quality (PESQ) performance than other noise reduction algorithms especially under low SNR environments. In addition, a fully operational digital hearing aid chip is designed and fabricated in the 0.13 µm CMOS process based on the proposed NRA. The final chip implementation shows that the whole chip dissipates 1.3 mA at the 1.2 V operation. The acoustic test result shows that the maximum output sound pressure level (OSPL) is 114.6 dB SPL, the equivalent input noise is 5.9 dB SPL, and the total harmonic distortion is 2.5%. So the proposed digital hearing aid chip is a promising candidate for high performance hearing-aid systems.

As seen in stream data processing, it is necessary to extract a particular data field from bulk data, where we can use a field-data extractor. Particularly, an (M,N)-field-data extractor reads out any consecutive N bytes from an M-byte register by connecting its input/output using multiplexers (MUXs). However, the number of required MUXs increases too much as the input/output byte widths increase. It is known that partitioning a MUX network leads to reducing the number of MUXs. In this paper, we firstly pick up a multi-layered MUX network, which is generated by repeatedly partitioning a MUX network into a collection of single-layered MUX networks. We show that the multi-layered MUX network is equivalent to the barrel shifter from which redundant MUXs and wires are removed, and we prove that the number of required MUXs becomes the smallest among MUX-network-partitioning based field-data extractors. Next, we propose a rotator-based MUX network for a field-data extractor, which is based on reading out a particular data in an input register to a rotator. The byte width of the rotator is the same as its output register and hence we no longer require any extra wires nor MUXs. By rotating the input data appropriately, we can finally have a right-ordered data into an output register. Experimental results show that a multi-layered MUX network reduces the number of required gates to construct a field-data extractor by up to 97.0% compared with the one using a naive approach and its delay becomes 1.8ns-2.3ns. A rotator-based MUX network with a control circuit also reduces the number of required gates to construct a field-data extractor by up to 97.3% compared with the one using a naive approach and its delay becomes 2.1ns-2.9ns.

Given an undirected graph G, an edge dominating set is a subset F of edges such that each edge not in F is adjacent to some edge in F, and computing the minimum size of an edge dominating set is known to be NP-hard. Since the size of any edge dominating set is at least half of the maximum size µ(G) of a matching in G, we study the problem of testing whether a given graph G has an edge dominating set of size ⌈µ(G)/2⌉ or not. In this paper, we prove that the problem is NP-complete, whereas we design an O*(2.0801µ(G)/2)-time and polynomial-space algorithm to the problem.

Image deconvolution is the task to recover the image information that was lost by taking photos with blur. Especially, to perform image deconvolution without prior information about blur kernel, is called blind image deconvolution. This framework is seriously ill-posed and an additional operation is required such as extracting image features. Many blind deconvolution frameworks separate the problem into kernel estimation problem and deconvolution problem. In order to solve the kernel estimation problem, previous frameworks extract the image's salient features by preprocessing, such as edge extraction. The disadvantage of these frameworks is that the quality of the estimated kernel is influenced by the region with no salient edges. Moreover, the optimization in the previous frameworks requires iterative calculation of convolution, which takes a heavy computational cost. In this paper, we present a blind image deconvolution framework using a specified high-pass filter (HPF) for feature extraction to estimate a blur kernel. The HPF-based feature extraction properly weights the image's regions for the optimization problem. Therefore, our kernel estimation problem can estimate the kernel in the region with no salient edges. In addition, our approach accelerates both kernel estimation and deconvolution processes by utilizing a conjugate gradient method in a frequency domain. This method eliminates costly convolution operations from these processes and reduces the execution time. Evaluation for 20 test images shows our framework not only improves the quality of recovered images but also performs faster than conventional frameworks.

This paper presents human-centered video feature selection via mRMR-SCMMCCA (minimum Redundancy and Maximum Relevance-Specific Correlation Maximization Multiset Canonical Correlation Analysis) algorithm for preference extraction. The proposed method derives SCMMCCA, which simultaneously maximizes two kinds of correlations, correlation between video features and users' viewing behavior features and correlation between video features and their corresponding rating scores. By monitoring the derived correlations, the selection of the optimal video features that represent users' individual preference becomes feasible.

Due to rapid increases in the number of users and diversity of devices, temporal fluctuation of traffic on information communication network is becoming large and rapid recently. Especially, sudden traffic changes such as flash crowds often cause serious congestion on the network and result in nearly fatal slow down of date-communication speed. In order to keep communication quality high on the network, routing protocols that are scalable and able to quickly respond to rapid, and often unexpected, traffic fluctuation are highly desired. One of the promising approaches is the distributed routing protocol, which works without referring global information of the whole network but requires only limited informatin of it to realize route selection. These approaches include biologically inspired routing protocols based on the Adaptive Response by Attractor Selection model (ARAS), in which routing tables are updated along with only a scalar value reflecting communication quality measured on each router without evaluating communication quality over the whole network. However, the lack of global knowledge of the current status of the network often makes it difficult to respond promptly to traffic changes on the network that occurs at outside of the local scope of the protocol and causes inefficient use of network resources. In order to solve the essential problem of the local scope, we extend ARAS and propose a routing protocol with active and stochastic route exploration. The proposed protocol can obtain current communication quality of the network beyond its local scope and promptly responds to traffic changes occur on the network by utilizing the route exploration. In order to compensate destabilization of routing itself due to the active and stochastic exploration, we also introduce a short-term memory to the dynamics of the proposed attractor selection model. We conform by numerical simulations that the proposed protocol successfully balances rapid exploration with reliable routing owning to the memory term.

Recently, cloud systems have started to be utilized for services which analyze user's data in the field of computer vision. In these services, keypoints are extracted from images or videos, and the data is identified by machine learning with a large database in the cloud. To reduce the number of keypoints which are sent to the cloud, Keypoints of Interest (KOI) extraction has been proposed. However, since its computational complexity is large, hardware implementation is required for real-time processing. Moreover, the hardware resource must be low because it is embedded in devices of users. This paper proposes a hardware-friendly KOI algorithm with low amount of computations and its real-time hardware implementation based on dual threshold keypoint detection by gradient histogram and parallelization of connectivity of adjacent keypoint-utilizing register counters. The algorithm utilizes dual-histogram based detection and keypoint-matching based calculation of motion information and dense-clustering based keypoint smoothing. The hardware architecture is composed of a detection module utilizing descriptor, and grid-region-parallelization based density clustering. Finally, the evaluation results of hardware implementation show that the implemented hardware achieves Full-HD (1920x1080)-60 fps spatio-temporal keypoint extraction. Further, it is 47 times faster than low complexity keypoint extraction on software and 12 times faster than spatio-temporal keypoint extraction on software, and the hardware resources are almost the same as SIFT hardware implementation, maintaining accuracy.

Collaborative filtering (CF) has been widely used in recommender systems to generate personalized recommendations. However, recommender systems using CF are vulnerable to shilling attacks, in which attackers inject fake profiles to manipulate recommendation results. Thus, shilling attacks pose a threat to the credibility of recommender systems. Previous studies mainly derive features from characteristics of item ratings in user profiles to detect attackers, but the methods suffer from low accuracy when attackers adopt new rating patterns. To overcome this drawback, we derive features from properties of item popularity in user profiles, which are determined by users' different selecting patterns. This feature extraction method is based on the prior knowledge that attackers select items to rate with man-made rules while normal users do this according to their inner preferences. Then, machine learning classification approaches are exploited to make use of these features to detect and remove attackers. Experiment results on the MovieLens dataset and Amazon review dataset show that our proposed method improves detection performance. In addition, the results justify the practical value of features derived from selecting patterns.

We introduce the design and deployment of the latest version of the VNode infrastructure, VNode-i. We present new extended VNode-i functions that offer high performance and provide convenient deep programmability to network developers. We extend resource abstraction to the transport network and achieve highly precise slice measurement for resource elasticity. We achieve precise resource isolation for VNode-i. We achieve coexistence of high performance and programmability. We also enhance AGW functions. In addition, we extend network virtualization from the core network to edge networks and terminals. In evaluation experiments, we deploy the enhanced VNode-i on the JGN-X testbed and evaluate its performance. We successfully create international federation slices across VNode-i, GENI, and Fed4FIRE. We also present experimental results on video streaming on a federated slice across VNode-i and GENI. Testbed experiments confirm the practicality of the enhanced VNode-i.

An (M,N)-field-data extractor reads out any consecutive N bytes from an M-byte register by connecting its input/output using a multiplexer (MUX) network. It is used in packet analysis and/or stream data processing for video/audio data. In this letter, we propose an efficient MUX network for an (M,N)-field-data extractor. By bi-partitioning a simple MUX network into an upper one and a lower one, we can theoretically reduce the number of required MUXs without increasing the MUX network depth. Experimental results show that we can reduce the gate count by up to 92% compared to a naive approach.

Today, computer vision is used in different applications for intelligent transportation systems like: traffic surveillance, driver assistance, law enforcement etc. Amongst these applications, we are concentrating on speed measurement for law enforcement. In law enforcement applications, the presence of the license plate in the scene is a presupposition and metric parameters like vehicle's speed are to be estimated with a high degree of precision. The novelty of this paper is to propose a new precise, practical and fast procedure, with hierarchical architecture, to estimate the homraphic transform of the license plate and using this transform to estimate the vehicle's speed. The proposed method uses the RANSAC algorithm to improve the robustness of the estimation. Hence, it is possible to replace the peripheral equipment with vision based systems, or in conjunction with these peripherals, it is possible to improve the accuracy and reliability of the system. Results of experiments on different datasets, with different specifications, show that the proposed method can be used in law enforcement applications to measure the vehicle's speed.

This paper considers an optimal stabilization problem of quantitative discrete event systems (DESs) under the influence of disturbances. We model a DES by a deterministic weighted automaton. The control cost is concerned with the sum of the weights along the generated trajectories reaching the target state. The region of weak attraction is the set of states of the system such that all trajectories starting from them can be controlled to reach a specified set of target states and stay there indefinitely. An optimal stabilizing controller is a controller that drives the states in this region to the set of target states with minimum control cost and keeps them there. We consider two control objectives: to minimize the worst-case control cost (1) subject to all enabled trajectories and (2) subject to the enabled trajectories starting by controllable events. Moreover, we consider the disturbances which are uncontrollable events that rarely occur in the real system but may degrade the control performance when they occur. We propose a linearithmic time algorithm for the synthesis of an optimal stabilizing controller which is robust to disturbances.

The separation of signals with temporal structure from mixed sources is a challenging problem in signal processing. For this problem, blind source extraction (BSE) is more suitable than blind source separation (BSS) because it has lower computation cost. Nowadays many BSE algorithms can be used to extract signals with temporal structure. However, some of them are not robust because they are too dependent on the estimation precision of time delay; some others need to choose parameters before extracting, which means that arbitrariness can't be avoided. In order to solve the above problems, we propose a robust source extraction algorithm whose performance doesn't rely on the choice of parameters. The algorithm is realized by maximizing the objective function that we develop based on the non-Gaussianity and the temporal structure of source signals. Furthermore, we analyze the stability of the algorithm. Simulation results show that the algorithm can extract the desired signal from large numbers of observed sensor signals and is very robust to error in the estimation of time delay.

Key frame based video summarization has emerged as an important task for efficient video data management. This paper proposes a novel technique for key frame extraction based on chaos theory and color information. By applying chaos theory, a large content change between frames becomes more chaos-like and results in a more complex fractal trajectory in phase space. By exploiting the fractality measured in the phase space between frames, it is possible to evaluate inter-frame content changes invariant to effects of fades and illumination change. In addition to this measure, the color histogram-based measure is also used to complement the chaos-based measure which is sensitive to changes of camera /object motion. By comparing the last key frame with the current frame based on the proposed frame difference measure combining these two complementary measures, the key frames are robustly selected even under presence of video fades, changes of illumination, and camera/object motion. The experimental results demonstrate its effectiveness with significant improvement over the conventional method.

In recent years, optical music recognition (OMR) has been extensively developed, particularly for use with mobile devices that require fast processing to recognize and play live the notes in images captured from sheet music. However, most techniques that have been developed thus far have focused on playing back instrumental music and have ignored the importance of lyric extraction, which is time consuming and affects the accuracy of the OMR tools. The text of the lyrics adds complexity to the page layout, particularly when lyrics touch or overlap musical symbols, in which case it is very difficult to separate them from each other. In addition, the distortion that appears in captured musical images makes the lyric lines curved or skewed, making the lyric extraction problem more complicated. This paper proposes a new approach in which lyrics are detected and extracted quickly and effectively. First, in order to resolve the distortion problem, the image is undistorted by a method using information of stave lines and bar lines. Then, through the use of a frequency count method and heuristic rules based on projection, the lyric areas are extracted, the cases where symbols touch the lyrics are resolved, and most of the information from the musical notation is kept even when the lyrics and music notes are overlapping. Our algorithm demonstrated a short processing time and remarkable accuracy on two test datasets of images of printed Korean musical scores: the first set included three hundred scanned musical images; the second set had two hundred musical images that were captured by a digital camera.

We describe a calculation tool and modeling methods to find self and mutual inductance and current distribution in superconductive multilayer circuit layouts. Accuracy of the numerical solver is discussed and compared with experimental measurements. Effects of modeling parameter selection on calculation results are shown, and we make conclusions on the selection of modeling parameters for fast but sufficiently accurate calculations when calibration methods are used. Circuit theory for the calculation of branch impedances from the output of the numerical solver is discussed, and compensation for solution difficulties is shown through example. We elaborate on the construction of extraction models for superconductive integrated circuits, with and without resistive branches. We also propose a method to calculate current distribution in a multilayer circuit with multiple bias current feed points. Finally, detailed examples are shown where the effects of stacked vias, bias pillars, coupling, ground connection stacks and ground return currents in circuit layouts for the AIST advanced process (ADP2) and standard process (STP2) are analyzed. We show that multilayer inductance and current distribution extraction in such circuits provides much more information than merely branch inductance, and can be used to improve layouts; for example through reduced coupling between conductors.

Object tracking is one of the fundamental problems in computer vision. However, there is still a need to improve the overall capability in various tracking circumstances. In this letter, a patches-collaborative compressive tracking (PCCT) algorithm is presented. Experiments on various challenging benchmark sequences demonstrate that the proposed algorithm performs favorably against several state-of-the-art algorithms.

Flow classification is of great significance for network management. Machine-learning-based flow classification is widely used nowadays, but features which depict the non-Gaussian characteristics of network flows are still absent. In this paper, we propose the Windowed Higher-order Statistical Analysis (WHOSA) for machine-learning-based flow classification. In our methodology, a network flow is modeled as three different time series: the flow rate sequence, the packet length sequence and the inter-arrival time sequence. For each sequence, both the higher-order moments and the largest singular values of the Bispectrum are computed as features. Some lower-order statistics are also computed from the distribution to build up the feature set for contrast, and C4.5 decision tree is chosen as the classifier. The results of the experiment reveals the capability of WHOSA in flow classification. Besides, when the classifier gets fully learned, the WHOSA feature set exhibit stronger discriminative power than the lower-order statistical feature set does.

Phishing attacks target financial returns by luring Internet users to exposure their sensitive information. Phishing originates from e-mail fraud, and recently it is also spread by social networks and short message service (SMS), which makes phishing become more widespread. Phishing attacks have drawn great attention due to their high volume and causing heavy losses, and many methods have been developed to fight against them. However, most of researches suffered low detection accuracy or high false positive (FP) rate, and phishing attacks are facing the Internet users continuously. In this paper, we are concerned about feature engineering for improving the classification performance on phishing web pages detection. We propose a novel anti-phishing framework that employs feature engineering including feature selection and feature extraction. First, we perform feature selection based on genetic algorithm (GA) to divide features into critical features and non-critical features. Then, the non-critical features are projected to a new feature by implementing feature extraction based on a two-stage projection pursuit (PP) algorithm. Finally, we take the critical features and the new feature as input data to construct the detection model. Our anti-phishing framework does not simply eliminate the non-critical features, but considers utilizing their projection in the process of classification, which is different from literatures. Experimental results show that the proposed framework is effective in detecting phishing web pages.