This paper proposes a method of improving the performance of blind reverberation time (RT) estimation in noisy environments. RT estimation is conducted using a maximum likelihood (ML) method based on the autocorrelation function of the linear predictive residual signal. To reduce the effect of environmental noise, a noise reduction technique is applied to the noisy speech signal. In addition, a frequency coefficient selection is performed to eliminate signal components with low signal-to-noise ratio (SNR). Experimental results confirm that the proposed method improves the accuracy of RT measures, particularly when the speech signal is corrupted by a colored noise with a narrow bandwidth.

In this paper, an image prior based on soft-morphological filters and its application to image recovery are presented. In morphological image processing, a gray-scale image is represented as a subset in a three-dimensional space, which is spanned by spatial and intensity axes. Morphological opening and closing, which are basic operations in morphological image processing, respectively approximate the image subset and its complementary images as the unions of structuring elements that are translated in the three-dimensional space. In this study, the opening and closing filters are applied to an image prior to resolve the regularization problem of image recovery. When the proposed image prior is applied, the image is recovered as an image that has no noise component, which is eliminated by the opening and closing. However, the closing and opening filters are less able to eliminate Gaussian noise. In order to improve the robustness against Gaussian noise, the closing and opening filters are respectively approximated as soft-closing and soft-opening with relaxed max and min functions. In image recovery experiments, image denoising and deblurring using the proposed prior are demonstrated. Comparisons of the proposed prior with the existing priors that impose a penalty on the gradient of the intensity are also shown.

In the impulse noise removal from a color image, vector filters are suitable for suppressing false color generation. However, the vector filters do not select optimal vectors to restore noise corrupted pixels. To cope with this problem, a cost function-based vector filter is proposed in this letter.

Due to the recent network service market trends, network infrastructure providers must make their network infrastructures tolerant of network service complexity and swift at providing new network services. To achieve this, we first make a design decision for the single domain network infrastructure in which we use network virtualization and separate the network service control and management from the network infrastructure and leave the resource connectivity control and management in the network infrastructure so that the infrastructure can maintain simplicity and the network service can become complex and be quickly provided. Along with the decision, we construct an architecture of the network infrastructure and a network management model. The management model defines a slice as being determined by abstracted resource requirements and restructures the roles and planes from the viewpoint of network infrastructure usability so that network service requesters can manage network resources freely and swiftly in an abstract manner within the authorities the network infrastructure operator provides. We give the details of our design and implementation for a network virtualization management system along with the model. We deployed and evaluated our designed and implemented management system on the Japan national R&E testbed (JGN-X) to confirm the feasibility of our management system design and discuss room for improvement in terms of response time and scalability towards practical use. We also investigated certain cases of sophisticated network functions to confirm that the infrastructure can accept these functions without having to be modified.

This paper proposes an adaptive band activity ratio control (ABC) with cascaded energy allocation (CEA) scheme to improve end-to-end spectral efficiency for two-hop amplify-and-forward orthogonal frequency division multiplexing relay systems under transmit energy constraint. Subchannel pairing (SP) based spectrum mapping maps spectral components transmitted over high gain subchannels in the source-to-relay link onto high gain subchannels of the relay-to-destination link to improve the spectral efficiency. However, SP suffers from a frame efficiency reduction due to the notification of information of spectral component order. To compensate for the deficiency of SP, the proposed scheme employs dynamic spectrum control with ABC in which spectral components are mapped onto subchannels having high channel gain in each link, while band activity ratio (BAR) is controlled to an optimal value, which is smaller than 1, so that all spectral components are transmitted over relatively high gain subchannels of the two links. To further improve the performance, energy allocation at the source node and the relay node is serially conducted based on convex optimization, and BAR is controlled to improve discrete-input continuous-output memoryless channel capacity at the relay node. In the proposed scheme, since only information of BAR needs to be notified, the notification overhead is drastically reduced compared to that in SP based spectrum mapping. Numerical analysis confirms that the proposed ABC combined with CEA significantly reduces the required notification overhead while achieving almost the same frame error rate performance compared with the SP based scheme.

Integrating the visual attention (VA) model into an objective image quality metric is a rapidly evolving area in modern image quality assessment (IQA) research due to the significant opportunities the VA information presents. So far, in the literature, it has been suggested to use either a task-free saliency map or a quality-task one for the integration into quality metric. A hybrid integration approach which takes the advantages of both saliency maps is presented in this paper. We compare our hybrid integration scheme with existing integration schemes using simple quality metrics. Results show that the proposed method performs better than the previous techniques in terms of prediction accuracy.

This paper proposes two energy-efficient standby mode algorithms in short-range one-to-one 60GHz millimeter-wave (mmWave) communications. Among the many usage scenarios for mmWave radio, file downloading from kiosk terminals or peer-to-peer sync service with portable terminals are of great interest. For these portable terminals, reducing power consumption of standby mode as well as keeping connection setup time short is important. Comparing the power consumption between frame transmission and reception in short-range one-to-one 60GHz mmWave, the power consumed for a frame reception may become larger than that for a frame transmission. The proposed two energy-efficient standby mode algorithms for one-to-one communications assure the connection setup time and take each terminal's different requirement for reduction of its power consumption into consideration. In the proposed algorithms, each terminal accesses asynchronously and operates based on an interval consisting of several sub-intervals. In one proposed algorithm (Prop 1), a terminal transmits a connection request frame (CREQ) once every sub-interval and the other terminal waits for the CREQ during one sub-interval per interval. Thus, Prop 1 reduces the power consumption for CREQ transmission. In the other proposed algorithm (Prop 2), a terminal selects one sub-interval randomly for each interval and transmits CREQs repeatedly during that sub-interval. The other terminal waits for a CREQ during this CREQ transmission period at every sub-interval. Prop 2 saves the power consumption for a CREQ reception. We evaluate the power consumption of standby mode and connection setup time for Prop 1 and Prop 2 by both numerical analysis and computer simulations. We show that the power consumption of the CREQ waiting terminal with the proposed algorithms is more than 10mW lower than that with the conventional algorithm. We also show that our numerical analysis of the proposed algorithms derives the optimum parameters and facilitates system design. Next, we implement Prop 2 in a fully-integrated CMOS transceiver chip-set with antenna, RF/analog, PHY, and MAC for 60GHz proximity wireless communication. This experimental result is the same as the analysis result and it is verified that our proposed standby algorithm works as designed.

We propose a method to extract scene situation by orientation sensors of multiple mobile phones' environment. By using orientations recorded with videos, we analyzed their view concentrations as a remarkable position of the scene for each frame of videos. In an experiment for a soccer scene, the extracted points can be related to a trajectory of a soccer ball.

Self-aligned four-terminal (4T) planar metal double-gate (DG) polycrystalline-silicon (poly-Si) thin-film transistors (TFTs) were fabricated on a glass substrate at a low temperature (LT), which is below $550^{circ}$C, to realize high performance and low power dissipation system-on-glass (SoG). The top gate (TG) and bottom gate (BG) were formed from tungsten (W); the BG was embedded in the glass substrate and the TG was fabricated by a self-alignment process using the BG as a photomask. This structure is called embedded metal double-gate (E-MeDG) in this paper. The poly-Si channel with lateral large grains was fabricated using a continuous-wave laser lateral crystallization (CLC). The self-aligned 4T E-MeDG LT poly-Si TFT, with a gate length of 5,$mu $m and TG and BG SiO$_2$ thicknesses of 50 and 100,nm, respectively, exhibited a subthreshold swing of 120,mV/dec and a threshold voltage ($mathrm{V}_{mathrm{th}}$) of $-$0.5,V in the connecting DG mode; i.e. when TG is connected to BG. In the TG operation at various BG control voltage, a threshold voltage modulation factor $(gamma = Delta mathrm{V}_{mathrm{th}}/Delta mathrm{V}_{mathrm{BG}})$ of 0.47 at negative BG control voltage and 0.60 at positive BG control voltage are demonstrated, which values are nearly equal to theoretical prediction of 0.40 and 0.75. Trend of subthreshold swing (s.s.) of TG operation under different BG control voltage are also consistent with theoretical prediction. In addition to TG operation, successful BG operation under various TG control voltages was confirmed. Field-effect mobility derived from g$_{mathrm{m}}$ also varied depending on control gate voltage. The high controllability of device parameter of individual LT poly-Si TFTs is caused by excellent crystalline quality of CLC poly-Si film and will enable us to the fabrication of high-speed and low power-dissipation SoG.

In this paper, we propose distributed medium access control (MAC) protocols based on an adaptive sensing period adjustment scheme for low-cost multiple secondary users in interweave-type cognitive radio (CR) networks. The proposed MAC protocols adjust the sensing period of each secondary user based on both primary sensing and secondary data channels in distributed manner. Then, the secondary user with the shortest sensing period accesses the medium using request-to-send (RTS) and clear-to-send (CTS) message exchange. Three components affect the length of each user's sensing period: sensing channel quality from the primary system, data channel quality to the secondary receiver, and collision probability among multiple secondary transmitters. We propose two sensing period adjustment (SPA) schemes to efficiently improve achievable rate considering the three components, which are logarithmic SPA (LSPA) and exponential SPA (ESPA). We evaluate the performance of the proposed schemes in terms of the achievable rate and other factors affecting it, such as collision probability, false alarm probability, and average sensing period.

Let p be an odd prime such that p ≡ 3 mod 4 and n be an odd positive integer. In this paper, two new families of p-ary sequences of period $N = rac{p^n-1}{2}$ are constructed by two decimated p-ary m-sequences m(2t) and m(dt), where d=4 and d=(pn+1)/2=N+1. The upper bound on the magnitude of correlation values of two sequences in the family is derived by using Weil bound. Their upper bound is derived as $rac{3}{sqrt{2}} sqrt{N+rac{1}{2}}+rac{1}{2}$ and the family size is 4N, which is four times the period of the sequence.

The Internet Engineering Task Force (IETF) has been actively standardizing distributed mobility management (DMM) schemes with multiple Mobility Anchors (MAs). Yet, all existing schemes have limitations that preclude the efficient distribution of mobile data traffic, including single point failure problems, heavy tunneling overheads between MAs, and a restrictive traffic distribution for external nodes in a mobility domain. Therefore, this paper proposes an efficient mobility management scheme with a virtual Local Mobility Anchor (vLMA). While the vLMA is designed assuming multiple replicated LMAs for a PMIPv6 domain, it acts virtually as a single LMA for the internal and external nodes in the PMIPv6 domain. Furthermore, the vLMA distributes mobile data traffic using replicated LMAs, and routes packets via a replicated LMA on the optimal routing path. Performance evaluations confirm that the proposed scheme can distribute mobile data traffic more efficiently and reduce the end-to-end packet delay than the Distributed Local Mobility Anchor (DLMA) and the Proxy Mobile IPv6 (PMIPv6).

One of the major applications of contrast-enhanced ultrasound (CEUS) is lesion classification. After contrast agents are administered, it is possible to identify a lesion type from its enhancement pattern. However, CEUS image reading is not easy because there are various types of enhancement patterns even for the same type of lesion, and clear classification criteria have not yet been defined. Some studies have used conventional time intensity curves (TICs), which show the vessel dynamics of a lesion. It is possible to predict lesion type from the TIC parameters, such as the coefficients obtained by curve fitting, peak intensity, flow rate and time to peak. However, these parameters are not always provide sufficient accuracy. In this paper, we prepare 1D Haar-like features which describe intensity changes in a TIC and adopt the Adaboost machine learning technique, which eases understanding of which features are useful. Hyperparameters of weak classifiers, e.g., the step size of a Haar-like filter length and threshold for output of the filter, are optimized by searching for those parameters that give the best accuracy. We evaluate the proposed method using 36 focal splenic lesions in canines 16 of which were benign and 20 malignant. The accuracies were 91.7% (33/36) when inspected by an experienced veterinarian, 75.0% (27/36) by linear discriminant analysis (LDA) using conventional three TIC parameters: time to peak, area under curve and peak intensity, and 91.7% (33/36) using our proposed method. McNemar testing shows the p-value to be less than 0.05 between the proposed method and LDA. This result shows the statistical significance of differences between the proposed method and the conventional TIC analysis method using LDA.

In most cases, the programmability of Software Defined Network (SDN) refers to the flexibility existing in northbound interface that enables network managers to control the behaviors of the networks. However, the lack of flexibility in data plane conversely results in wasting potentially usable information for controlling flows, especially from network services and applications point of view. For example, OpenFlow switches only deal with L2-L4 headers and ignore the other parts of packet. We propose Ouroboros as a programmable switch logic to increase the flexibility of SDN southbound interface. Ouroboros switches not only remove the limitation of regular OpenFlow switches using packet headers as the reference for packet switching, but also provides a highly flexible interface for network managers to conduct application-specific flow control according to packet content at any arbitrary offsets. Ouroboros can penetrate deeply into packet (e.g., RTP or SIP) protocol headers, or further into packet payload, to process user-defined switching protocol. Our evaluations of Ouroboros on 10Gbps traffic indicates the effectiveness of proposed method.

This paper studies mapping techniques of multiple applications on embedded many-core SoCs. The mapping techniques proposed in this paper are static which means the mapping is decided at design time. The mapping techniques take into account both inter-application and intra-application parallelism in order to fully utilize the potential parallelism of the many-core architecture. Additionally, the proposed static mapping supports dynamic application switching, which means the applications mapped onto the same cores are switched to each other at runtime. Two approaches are proposed for static mapping: one approach is based on integer linear programming and the other is based on a greedy algorithm. Experimental results show the effectiveness of the proposed techniques.

This paper presents a prediction model based on historical data to achieve optimal values of pipelining, concurrency and parallelism (PCP) in GridFTP data transfers in Cloud systems. Setting the correct values for these three parameters is crucial in achieving high throughput in end-to-end data movement. However, predicting and setting the optimal values for these parameters is a challenging task, especially in shared and non-predictive network conditions. Several factors can affect the optimal values for these parameters such as the background network traffic, available bandwidth, Round-Trip Time (RTT), TCP buffer size, and file size. Existing models either fail to provide accurate predictions or come with very high prediction overheads. The author shows that new model based on historical data can achieve high accuracy with low overhead.

In this letter, we propose a simple algorithm to jointly estimate the symbol timing offset (STO) and carrier frequency offset (CFO) of wireless body area network (WBAN) signals. The preamble specified in IEEE 802.15.6 WBAN is used to achieve an accurate timing and frequency estimation based on the differential correlation. Simulations demonstrate that the proposed joint estimation scheme can be effectively employed to get accurate STO and CFO estimate with less complexity.

In developing an automatic system of a single tooth length measurement on x-ray image, since a tooth shape is assumed to be straight and curve, an algorithm which can accurately deal with straight and curve is required. This paper proposes an automatic algorithm for measuring the length of single straight and curve teeth. In the algorithm consisting of control point determination, curve fitting, and length measurement, PCA is employed to find the first and second principle axes as vertical and horizontal ones of the tooth, and two terminal points of vertical axis and the junction of those axes are determined as three first-order control points. Signature is then used to find a peak representing tooth root apex as the forth control point. Bezier curve, Euclidean distance, and perspective transform are finally applied with determined four control points in curve fitting and tooth length measurement. In the experiment, comparing with the conventional PCA-based method, the average mean square error (MSE) of the line points plotted by the expert is reduced from 7.548 pixels to 4.714 pixels for tooth image type-I, whereas the average MSE value is reduced from 7.713 pixels and 7.877 pixels to 4.809 pixels and 5.253 pixels for left side and right side of tooth image type-H, respectively.