The iCAM06 has been used as an image appearance model for HDR image rendering. iCAM06 goes through the color space conversions of the several steps to present HDR images. The dynamic range of a HDR image needs to be mapped onto the range of output devices, which is called the tone mapping. However, tone compression process of iCAM06 causes white point shift and color distortion because of color-clipping and cross-stimulus. Therefore, we proposed a modified white-balanced method in low-chromatic region and a color adjustment method in IPT space to compensate the color distortion during in tone compression process. Through the experimental results, we confirmed the proposed compatible color adjustment method had better performance than iCAM06 and enhanced models.

1 × N active multi-mode interferometer laser diode (MMI LD) is proposed and demonstrated to realize single-wavelength edge-emitter without using grating configuration. As the 1 × N active-MMI LDs are based on longitudinal mode interference, they have a potential of single-wavelength emission without incorporating any grating layer on/beneath active layer. The fabricated devices showed single-wavelength emission with a side mode suppression ratio (SMSR) of 12dB at a wavelength of 1.57µm.

In this paper, we consider the optimization of measurement matrix in Compressed Sensing (CS) framework. Based on the boundary constraint, we propose a novel algorithm to make the “mutual coherence” approach a lower bound. This algorithm is implemented by using an iterative strategy. In each iteration, a neighborhood interval of the maximal off-diagonal entry in the Gram matrix is scaled down with the same shrinkage factor, and then a lower mutual coherence between the measurement matrix and sparsifying matrix is obtained. After many iterations, the magnitudes of most of off-diagonal entries approach the lower bound. The proposed optimization algorithm demonstrates better performance compared with other typical optimization methods, such as t-averaged mutual coherence. In addition, the effectiveness of CS can be used for the compression of complex synthetic aperture radar (SAR) image is verified, and experimental results using simulated data and real field data corroborate this claim.

The relationship between different brain areas is characterized by functional networks through correlations of time series obtained from neuroimaging experiments. Due to its high spatial resolution, functional MRI data is commonly used for generating functional networks of the entire brain. These networks are comprised of the measurement points/channels as nodes and links are established if there is a correlation in the measured time series of these nodes. However, since the evaluation of correlation becomes more accurate with the length of the underlying time series, we construct in this paper functional networks from MEG data, which has a much higher time resolution than fMRI. We study in particular how the network topologies change in an experiment on ambiguity of words, where the subject first receives a priming word before being presented with an ambiguous or unambiguous target word.

Thanks to the achievements in wireless technology, maximum data rate of wireless LAN systems was rapidly increased recently. As a key part of the WEP and the WPA security for the wireless LAN system, throughput of RC4 must be significantly improved also. This paper proposes two high throughput RC4 architectures. The first one is a RAM-based RC4 using a single of 256-byte tri-port RAM to store the S-box. The core generates 4bits of ciphering key per clock cycle. This paper also proves that 4bits/cycle is the maximum throughput can be achieved by a RAM-based RC4 circuit. The second architecture is a Register-based M-byte RC4 that uses a set of registers to store the S-box. It is able to generate multiple bytes of ciphering key per clock cycle, and is proposed as a novel solution for designing extremely high throughput RC4 core for future WLAN systems. Base on this proposal, a 4-byte RC4 core is developed (M=4). The synthesis results in 90nm ASIC show that: As the same throughput's requirement, the proposed RAM-based and Register-based RC4 can respectively save 60% and 50% of power consumption as compare to that of the most recently works. Moreover, the proposed Register-based design is the best candidate for achieving high throughput at low frequency.

Due to vehicle movement and lossy wireless channels, providing a reliable and efficient multi-hop broadcast service in vehicular ad hoc networks (VANETs) is a well-known challenging problem. In this paper, we propose BR-NB (broadcast with neighbor information), a fuzzy logic based multi-hop broadcast protocol for VANETs. BR-NB achieves a low overhead by using only a subset of neighbor nodes to relay data packets. For the relay node selection, BR-NB jointly considers multiple metrics of the inter-vehicle distance, vehicle mobility and link quality by employing fuzzy logic. Since the expected coverage and vehicle mobility are inferred from the two-hop neighbor information which can be acquired from the hello message exchange, BR-NB is independent of position information. BR-NB provides a practical and portable solution for broadcast services in VANETs. We use computer simulations and real-world experiments to evaluate the performance of BR-NB.

LTE-Advanced supports asymmetric carrier aggregation (CA) to achieve flexible bandwidth allocation by applying different numbers of component carriers (CCs) between the downlink and uplink. This paper experimentally clarifies the achievable downlink throughput performance when uplink control information (UCI) feedback mechanism using the physical uplink shared channel (PUSCH), which enables minimization of the UCI overhead while maintaining the required reception quality, is applied in asymmetric CA. The laboratory experimental results show that the stable reception quality control of the channel quality information (CQI) with the target block error rate (BLER) of 10-1 to 10-2 is achieved irrespective of the average received signal-to-noise power ratio (SNR) when the control offset parameter of approximately 1.25 is used. We also show that the achievable downlink throughput when the CQI error is considered is almost the same as that in no CQI error case. Furthermore, based on the experimental results in a real field environment, a suburban area of Yokosuka city in Japan, we confirm stable adaptive modulation and coding (AMC) operation including target BLER control of the CQI on the PUSCH in asymmetric CA. The field experimental results also show that when CA with 5 CCs (90-MHz bandwidth) and 2-by-2 rank-2 multiple-output multiple-input (MIMO) multiplexing are employed in the downlink, the peak throughput of approximately 640Mbps is achieved even considering the CQI error.

As an extension of H.264/AVC, Scalable Video Coding (SVC) provides the ability to adapt to heterogeneous networks and user-end requirements, which offers great scalability in multi-point applications such as videoconferencing. However, transcoding between SVC and AVC becomes necessary due to the existence of legacy AVC-based systems. The straightforward full re-encoding method requires great computational cost, and the fast SVC-to-AVC spatial transcoding techniques have not been thoroughly investigated yet. This paper proposes a low-complexity hybrid-domain SVC-to-AVC spatial transcoder with drift compensation, which provides even better coding efficiency than the full re-encoding method. The macroblocks (MBs) of input SVC bitstream are divided into two types, and each type is suitable for pixel- or transform-domain processing respectively. In the pixel-domain transcoding, a fast re-encoding method is proposed based on mode mapping and motion vector (MV) refinement. In the transform-domain transcoding, the quantized transform coefficients together with other motion data are reused directly to avoid re-quantization loss. The drift problem caused by proposed transcoder is solved by compensation techniques for I frame and P frame respectively. Simulation results show that proposed transcoder achieves averagely 96.4% time reduction compared with the full re-encoding method, and outperforms the reference methods in coding efficiency.

Video coding plays an important role in human life especially in communications. H.264/AVC is a prominent video coding standard that has been used in a variety of applications due to its high efficiency comes from several new coding techniques. However, the extremely high encoding complexity hinders itself from real-time applications. This paper presents a new encoding algorithm that makes use of particle swarm optimization (PSO) to train discriminant functions for classification based fast mode decision. Experimental results show that the proposed algorithm can successfully reduce encoding time at the expense of negligible quality degradation and bitrate increases.

This paper proposes a secure wireless network system required for an ambient information society; it forms a privacy zone wherein terminals can securely communicate secret information using an arbitrary general radio channel. For this system, we introduce a scheme using a side-information from a special node. The information is used as an encryption key so that the detectable region of the key defines a privacy zone. We implement the scheme on the basis of IEEE 802.15.4 and realize the world's first ambient network platform with the above functionality. An experiment and demonstration show the effectiveness of the proposed system.

This paper proposes an inter-prediction method for the upcoming video coding standard named HEVC (High Efficiency Video Coding). The HEVC offers an inter-prediction framework called local intensity compensation which represents a current block by a linear combination of some reference blocks. The proposed method calculates weight coefficients of the linear combination by using sparse representation. Experimental results show that the proposed method increases prediction accuracy in comparison with other methods.

In information retrieval from printed images considering the use of mobile devices, the correction of geometrical deformation and lens distortion is required, posing a heavy computational burden. In this paper, we propose a method of reducing the computational burden for such corrections. This method consists of improved extraction to find a line segment of a frame, the reconsideration of the interpolation method for image correction, and the optimization of image resolution in the correction process. The proposed method can reduce the number of computations significantly. The experimental result shows the effectiveness of the proposed method.

We present transmission- and reflection-type measurement methods for the differential mode delay (DMD) of a multimode optical fiber (MMF) optimized for high-speed local area networks (LANs) for the 850-nm band. Compared with a previously reported transmission-type measurement method for the 1550-nm wavelength band, we demonstrate here high-resolution DMD measurement methods for MMFs in the 850-nm band. As the method is based on a Fourier-domain intermodal interference technique, the measurement sensitivity is ∼60-dB, and it requires a fiber only a few meters in length. The shorter wavelength also allows a threefold improvement in the measurement resolution. The reflection-type measurement technique is a more practical than the transmission-type measurement technique for the field testing of short MMFs already installed in networks. We believe that this method will be a practical tool not only for field testing of short-length MMFs already installed in networks but also for the development of new plastic optical fibers (POFs).

Conventional CPM signals employ information sequence with time-unlimited phase shaping pulse (PSP) to achieve power and bandwidth efficient transmission. On the contrary, information sequence using time-limited PSP was believed to produce power-wasting data-independent discrete spectral lines in CPM spectra, and was suggested to be avoided. In this paper, we revisit this problem and adopt the time-limited PSP to replace the one with time-unlimited, it turns out to have an alternative solution to the CPM scheme. We first modify the spectral computing formula for the CPM with time-limited PSP (or CPM-TL) from conventional CPM formula and show that the discrete spectral lines appeared in the power density spectrum of CPM-TL signals can be diminished or become negligible by appropriately choosing PSP. We also show that this class of CPM can use any real number modulation index (h) and the resultant trellis structure of CPM guarantees the maximum constraint length allowed by the number of states in the MLSD receiver. Finally, the energy-bandwidth performance of CPM using time-limited PSP is investigated and compared with conventional CPM with time-unlimited PSP. From numerical results we show that, under the same number of states in the MLSD receiver and bandwidth occupancy, this subclass of CPM could outperform the conventional CPM up to 6dB coding gain, for h<1, in many cases.

An on-chip SIDO DC-DC boost converter core that can be used for both battery and solar cell operating applications is proposed. The converter is able to supply a current of up to around 30mA with an on-chip driver and more than 100mA by using an off-chip power MOS driver. The cross regulation problem was solved by inserting an extra cycle. Efficiencies of 85% and 84% were achieved for each driving mode. Complicated maximum power point tracking (MPPT) controls are available for a solar cell operation. An embedded micro-computer can be used to calculate a complicated algorithm. The converter exploits 99% of the expected maximum power of the solar cell. The converter protects the leak current that flows through the solar cell when there is no light. The proposed protection circuits reduce the leak current by three orders of magnitude without any performance loss.

This paper describes how to design matching structures to improve the frequency characteristics of one-dimensional finite periodic structures. In particular, it deals with one-dimensional finite superlattices. A downhill simplex method is used to determine some of the structural parameters of the matching structure. Numerical examples show that this method is effective in improving the frequency characteristics of finite superlattices.

This paper describes a novel technique to replace some of the driven elements in an array antenna with parasitic elements. First, the antenna characteristics are studied by simulation for a basic unit array with one driven and two parasitic elements. The entire antenna is backed with a flat reflector to conform to practical applications. The parasitic elements are excited by the neighboring driven elements through the electromagnetic coupling effect. It is shown that at the optimal coupling condition, the radiation patterns are almost identical with those of an array antenna whose elements are all driven without coupling. The simulation result is confirmed by performing an experiment at 5.8GHz (λ =51.7mm). Finally, a 12-element array is formed by combining four unit arrays. The simulation results show that the maximum antenna gain is 19.4dBi, indicating that there is no penalty with respect to the antenna gain of a fully driven 12-element array. Therefore, the array antenna can be considerably simplified by replacing 67% of its elements with parasitic elements.

In this paper, we propose a chromatic adaptation model based on the adapting degree according to the level of adapting luminance and chromaticity in various surround illuminants. In the proposed model, first maximum adapted cone responses are calculated through the estimation of adapting degree for viewing conditions then corresponding colors are reproduced from original colors using the ratio of maximum adapted cone responses between different viewing conditions. The purpose of this study is to produce chromatic adaptation transform applied to environment-adaptive color display system. As a result, our proposed model can give better estimation performance than prior models and be embodied easily as a linear model in display systems. So it is confirmed that the implemented system can predict corresponding-color data very well under a variety of viewing conditions.

Cloud computing is broadly recognized as as the prevalent trend in IT. However, in cloud computing mode, customers lose the direct control of their data and applications hosted by the cloud providers, which leads to the trustworthiness issue of the cloud providers, hindering the widespread use of cloud computing. This paper proposes a trustworthiness verification and audit mechanism on cloud providers called T-YUN. It introduces a trusted third party to cyclically attest the remote clouds, which are instrumented with the trusted chain covering the whole architecture stack. According to the main operations of the clouds, remote verification protocols are also proposed in T-YUN, with a dedicated key management scheme. This paper also implements a proof-of-concept emulator to validate the effectiveness and performance overhead of T-YUN. The experimental results show that T-YUN is effective and the extra overhead incurred by it is acceptable.

Avoiding runway incursions is a significant challenge and a top priority in aviation. Due to all causes of runway incursions belong to human factors, runway incursion prevention systems should remove human from the system operation loop as much as possible. Although current runway incursion prevention systems have made big progress on how to obtain accurate and sufficient information of aircraft/vehicles, they cannot predict and detect runway incursions as early as experienced air traffic controllers by using the same surveillance information, and cannot give explicit instructions and/or suggestions to prevent runway incursions like real air traffic controllers either. In one word, human still plays an important position in current runway incursion prevention systems. In order to remove human factors from the system operation loop as much as possible, this paper proposes a new type of runway incursion prevention system based on logic-based reasoning. The system predicts and detects runway incursions, then gives explicit instructions and/or suggestions to pilots/drivers to avoid runway incursions/collisions. The features of the system include long-range prediction of incidents, explicit instructions and/or suggestions, and flexible model for different policies and airports. To evaluate our system, we built a simulation system, and evaluated our system using both real historical scenarios and conventional fictional scenarios. The evaluation showed that our system is effective at providing earlier prediction of incidents than current systems, giving explicit instructions and/or suggestions for handling the incidents effectively, and customizing for specific policies and airports using flexible model.