This paper presents a fully differential third-order (2-1) switched-current (SI) cascaded delta-sigma modulator (DSM), with an analog error cancellation logic circuit, and a digital decimation filter that is fabricated using 0.18-µm CMOS technology. The 2-1 architecture with only the quantizer input being fed into the second stage is introduced not only to reduce the circuit complexity, but also to be implemented easily using the switched-current approach. Measurements reveal that the dominant error is the quantization error of the second one-bit quantizer (e2). This error can be eliminated using an analog error cancellation logic circuit. In the proposed differential sample-and-hold circuit, low input impedance is presented with feedback and width-length adjustment in SI feedback memory cell (FMC); and that a coupled differential replicate (CDR) common-mode feedforward circuit (CMFF) is used to compensate the error of the current mirror. Also, measurements indicate that the signal-to-noise ratio (SNR), dynamic range (DR), effective number of bits (ENOB), power consumption and chip size are 67.3 dB, 69 dB, 10.9 bits, 12.3 mW, and 0.200.21 mm2, respectively, with a bandwidth of 40 kHz, a sampling rate of 10.24 MHz, an OSR of 128 and a supply voltage of 1.8 V.

We present a small-area second-order all-digital time-to-digital converter (TDC) with two frequency shift oscillators (FSOs) comprising inverter chains and dynamic flipflops featuring low jitter. The proposed FSOs can maintain their phase states through continuous oscillation, unlike conventional gated ring oscillators (GROs) that are affected by transistor leakage. Our proposed FSOTDC is more robust and is eligible for all-digital TDC architectures in recent leaky processes. Low-jitter dynamic flipflops are adopted as a quantization noise propagator (QNP). A frequency mismatch occurring between the two FSOs can be canceled out using a least mean squares (LMS) filter so that second-order noise shaping is possible. In a standard 65-nm CMOS process, an SNDR of 61 dB is achievable at an input bandwidth of 500 kHz and a sampling rate of 16 MHz, where the respective area and power are 700 µm2 and 281 µW.

We present an optimization algorithm for the design of multilayer antireflection (AR) coatings for organic photovoltaic (OPV) cells. When a set of available materials for the AR films is given, the proposed method allows for searching the globally optimized AR structure that maximizes the short-circuit current density (JSC) under simulated solar light illumination (AM 1.5). By applying this method to an OPV solar cell with a configuration of Al/P3HT:PCBM/MoO3/ITO, we demonstrated that JSC can increase by 7.5% with a 6-layer AR coating, consisting of MgF2, ZnS, and Al2O3. A notable feature of this method is that it can find not only the optimal solution, which maximizes JSC , but also the quasi-optimal solutions, which increase JSC to nearly maximum levels. We showed that the quasi-optimal solution may have higher robustness against deviations in film thicknesses, from their designated values. This method indicates the importance of practically useful, non-optimal solutions for designing AR coatings. The present method allows for extending the user's choices and facilitates the realization of a practical design for an AR coating.

Multiple-input multiple-output (MIMO) systems with antenna selection are practical in that they can alleviate the computational complexity at the receiver and achieve good reception performance. Channel correlation, not just carrier-to-noise ratio (CNR), has a great impact on reception performance in MIMO channels. We propose a practical receive antenna subset selection algorithm with reduced complexity that uses the condition number of the partial channel matrix and a predetermined CNR threshold. This paper describes the algorithm and its performance evaluation by both computer simulation and indoor experiments using a prototype receiver and received signals obtained in an actual mobile outdoor experiment. The results confirm that our proposed method provides good bit error rate performance by setting the CNR threshold properly.

According to the process scaling, radiation-hard devices are becoming sensitive to soft errors caused by Multiple Cell Upset (MCUs). In this paper, the parasitic bipolar effects are utilized to suppress MCUs of the radiation-hard dual-modular flip-flops. Device simulations reveal that a simultaneous flip of redundant latches is suppressed by storing opposite values instead of storing the same value due to its asymmetrical structure. The state of latches becomes a specific value after a particle hit due to the bipolar effects. Spallation neutron irradiation proves that MCUs are effectively suppressed in the D-FF arrays in which adjacent two latches in different FFs store opposite values. The redundant latch structure storing the opposite values is robust to the simultaneous flip.

This paper presents an adaptive cache architecture for wide-range reliable low-voltage operations. The proposed associativity-reconfigurable cache consists of pairs of cache ways so that it can exploit the recovery feature of the novel 7T/14T SRAM cell. Each pair has two operating modes that can be selected based upon the required voltage level of current operating conditions: normal mode for high performance and dependable mode for reliable low-voltage operations. We can obtain reliable low-voltage operations by application of the dependable mode to weaker pairs that cannot operate reliably at low voltages. Meanwhile leaving stronger pairs in the normal mode, we can minimize performance losses. Our chip measurement results show that the proposed cache can trade off its associativity with the minimum operating voltage. Moreover, it can decrease the minimum operating voltage by 140 mV achieving 67.48% and 26.70% reduction of the power dissipation and energy per instruction. Processor simulation results show that designing the on-chip caches using the proposed scheme results in 2.95% maximum IPC losses, but it can be chosen various performance levels. Area estimation results show that the proposed cache adds area overhead of 1.61% and 5.49% in 32-KB and 256-KB caches, respectively.

The quadtree-based variable block sized prediction makes the biggest contribution for dramatically improved coding efficiency in the new video coding standard named HEVC. However, this technique takes about 75–80% computational complexity of an HEVC encoder. This paper brings forward an adaptive scheme that exploits temporal, spatial and transform-domain features to speed up the original quadtree-based prediction, targeting at high resolution videos. Before encoding starts, analysis on utilization ratio of each coding depth is performed to skip rarely adopted coding depths at frame level. Then, texture complexity (TC) measurement is applied to filter out none-contributable coding blocks for each largest coding unit (LCU). In this step, a dynamic threshold setting approach is proposed to make filtering adaptable to videos and coding parameters. Thirdly, during encoding process, sum of absolute quantized residual coefficient (SAQC) is used as criterion to prune useless coding blocks for both LCUs and 3232 blocks. By using proposed scheme, motion estimation is performed for prediction blocks within a narrowed range. Experiments show that proposed scheme outperforms existing works and speeds up original HEVC by a factor of up to 61.89% and by an average of 33.65% for 4kx2k video sequences. Meanwhile, the peak signal-to-noise ratio (PSNR) degradation and bit increment are trivial.

Parametric images can help investigate disease mechanisms and vital functions. To estimate parametric images, it is necessary to obtain the tissue time activity curves (tTACs), which express temporal changes of tracer activity in human tissue. In general, the tTACs are calculated from each voxel's value of the time sequential PET images estimated from dynamic PET data. Recently, spatio-temporal PET reconstruction methods have been proposed in order to take into account the temporal correlation within each tTAC. Such spatio-temporal algorithms are generally quite computationally intensive. On the other hand, typical algorithms such as the preconditioned conjugate gradient (PCG) method still does not provide good accuracy in estimation. To overcome these problems, we propose a new spatio-temporal reconstruction method based on the dynamic row-action maximum-likelihood algorithm (DRAMA). As the original algorithm does, the proposed method takes into account the noise propagation, but it achieves much faster convergence. Performance of the method is evaluated with digital phantom simulations and it is shown that the proposed method requires only a few reconstruction processes, thereby remarkably reducing the computational cost required to estimate the tTACs. The results also show that the tTACs and parametric images from the proposed method have better accuracy.

In this letter, we propose a novel intra prediction coding scheme for H.264/AVC. Based on our proposed minimum distance prediction (MDP) scheme, the optimal reference samples for predicting the current pixel can be adaptively updated corresponding to different video contents. The experimental results show that up to 2 dB and 1 dB coding gains can be achieved with the proposed method for QCIF and CIF sequences respectively.

In object tracking, a recent trend is using “Tracking by Detection” technique which trains a discriminative online classifier to detect objects from background. However, the incorrect updating of the online classifier and insufficient features used during the online learning often lead to the drift problems. In this work we propose an online random fern classifier with a simple but effective compressive feature in a framework integrating the online classifier, the optical-flow tracker and an update model. The compressive feature is a random projection from highly dimensional multi-scale image feature space to a low-dimensional representation by a sparse measurement matrix, which is expect to contain more information. An update model is proposed to detect tracker failure, correct tracker result and constrain the updating of online classifier, thus reducing the chance of wrong updating in online training. Our method runs at real-time and the experimental results show performance improvement compared to other state-of-the-art approaches on several challenging video clips.

This paper describes a low-power VLSI chip for speaker-independent 60-kWord continuous speech recognition based on a context-dependent Hidden Markov Model (HMM). It features a compression-decoding scheme to reduce the external memory bandwidth for Gaussian Mixture Model (GMM) computation and multi-path Viterbi transition units. We optimize the internal SRAM size using the max-approximation GMM calculation and adjusting the number of look-ahead frames. The test chip, fabricated in 40 nm CMOS technology, occupies 1.77 mm2.18 mm containing 2.52 M transistors for logic and 4.29 Mbit on-chip memory. The measured results show that our implementation achieves 34.2% required frequency reduction (83.3 MHz), 48.5% power consumption reduction (74.14 mW) for 60 k-Word real-time continuous speech recognition compared to the previous work while 30% of the area is saved with recognition accuracy of 90.9%. This chip can maximally process 2.4faster than real-time at 200 MHz and 1.1 V with power consumption of 168 mW. By increasing the beam width, better recognition accuracy (91.45%) can be achieved. In that case, the power consumption for real-time processing is increased to 97.4 mW and the max-performance is decreased to 2.08because of the increased computation workload.

Objective: The virtual slides are high-magnification whole digital images of histopathological tissue sections. The existing virtual slide system, which is optimized for scanning flat and smooth plane slides such as histopathological paraffin-embedded tissue sections, but is unsuitable for scanning irregular plane slides such as cytological smear slides. This study aims to develop a virtual slide system suitable for cytopathology slide scanning and to evaluate the effectiveness of multi-focus image fusion (MF) in cytopathological diagnosis. Study Design: We developed a multi-layer virtual slide scanning system with MF technology. Tumors for this study were collected from 21 patients diagnosed with primary breast cancer. After surgical extraction, smear slide for cytopathological diagnosis were manufactured by the conventional stamp method, fine needle aspiration method (FNA), and tissue washing method. The stamp slides were fixed in 95% ethanol. FNA and tissue washing samples were fixed in CytoRich RED Preservative Fluid, a liquid-based cytopathology (LBC). These slides were stained with Papanicolaou stain, and scanned by virtual slide system. To evaluate the suitability of MF technology in cytopathological diagnosis, we compared single focus (SF) virtual slide with MF virtual slide. Cytopathological evaluation was carried out by 5 pathologists and cytotechnologists. Results: The virtual slide system with MF provided better results than the conventional SF virtual slide system with regard to viewing inside cell clusters and image file size. Liquid-based cytology was more suitable than the stamp method for virtual slides with MF. Conclusion: The virtual slide system with MF is a useful technique for the digitization in cytopathology, and this technology could be applied to tele-cytology and e-learning by virtual slide system.

In Wireless Sensor Networks (WSNs), sensor nodes consume their limited battery energy to send and receive data packets for data transmission. If some sensor nodes transmit data packets more frequently due to imbalance in the network topology or traffic flows, they experience higher energy consumption. And if the sensor nodes are not recharged, they will be turned off from the lack of battery energy which will degrade network sustainability. In order to resolve this problem, this paper proposes an Energy-aware MAC Protocol (EMP), which adaptively decides on the size of the channel polling cycle consisting of the sleep state (not to communicate with its target node) and the listening state (to awaken to receive data packets), according to the network traffic condition. Moreover, in accordance with the remaining energy state of the sensor node, the minimum size of the channel polling cycle is increased for better energy saving. For performance evaluation and comparison, we develop a Markov chain-based analytical model and an event-driven simulator. Simulation results show that a sensor node with EMP effectively reduces its energy consumption in imbalanced network condition and traffic flows, while latency somewhat increases under insufficient remaining energy. As a consequence, a holistic perspective for enhanced network sustainability can be studied in consideration of network traffic condition as well as the remaining energy states of sensor nodes.

Broadcast encryption scheme with personalized messages (BEPM) is a new primitive that allows a broadcaster to encrypt both a common message and individual messages. BEPM is necessary in applications where individual messages include information related to user's privacy. Recently, Fujii et al. suggested a BEPM that is extended from a public key broadcast encryption (PKBE) scheme by Boneh, Gentry, and Waters. In this paper, we point out that 1) Conditional Access System using Fujii et al.'s BEPM should be revised in a way that decryption algorithm takes as input public key as well, and 2) performance analysis of Fujii et al.'s BEPM should be done depending on whether the public key is transmitted along with ciphertext or stored into user's device. Finally, we propose a new BEPM that is transmission-efficient, while preserving O(1) user storage cost. Our construction is based on a PKBE scheme suggested by Park, Kim, Sung, and Lee, which is also considered as being one of the best PKBE schemes.

We propose a novel propagation measurement scheme for terrestrial TV signal indoor reception based on a virtual array technique. The system proposed in this paper carries out two-branch recording of target signals and the reference signal. By using the signal phase reference in the reference signal, we clarify the spatial propagation characteristics obtained from the two-dimensional virtual array outputs. Outdoor measurements were performed first to investigate the validity of the proposed measurement system. The results confirm its effectiveness in accurately determining the direction-of-arrival (DOA). We then investigated the propagation characteristics in an indoor environment. The angular spectrum obtained showed clear wave propagation structure. Thus, our proposed system is promising as a very accurate measurement tool for indoor propagation analysis.

For the problem of Indoor Home Scene Classification, this paper proposes the BOW Model of Local Feature Information Gain. The experimental results show that not only the performance is improved but also the computation is reduced. Consequently this method out performs the state-of-the-art approach.

We present a new approach for sparse Cholesky factorization on a heterogeneous platform with a graphics processing unit (GPU). The sparse Cholesky factorization is one of the core algorithms of numerous computing applications. We tuned the supernode data structure and used a parallelization method for GPU tasks to increase GPU utilization. Results show that our approach substantially reduces computational time.

This paper presents a technique that analyzes pedestrians' attributes such as gender and bag-possession status from surveillance video. One of the technically challenging issues is that we use only top-view camera images to protect privacy. The shape features over the frames are extracted by bag-of-features (BoF) using histogram of oriented gradients (HoG) vectors. In order to enhance the classification accuracy, a two-staged classification framework is presented. Multiple classifiers are trained by changing the parameters in the first stage. The outputs from the first stage is further trained and classified in the second stage classifier. The experiments using 60-minute video captured at Haneda Airport, Japan, show that the accuracies for the gender classification and the bag-possession classification were 95.8% and 97.2%, respectively, which is a significant improvement from our previous work.

In this letter, we propose an error surface modeling-based segmentalized motion estimation for video coding. We proposed two algorithms previously, one was MBQME [1] and the other is HMBQME [2]. However, these algorithms are not based on locally quadratic MC prediction errors around an integer-pixel motion vector and the hypothesis that the local error plane is a convex function. Therefore, we propose an error surface considered segmentalized modeling algorithm. In this scheme, the tendency of the error surface is first assessed. Using the Sobel operation at the error surface, we classify the error surface region as plain or textured. For plain regions, conventional MBQME is appropriate as the quarter-pixel motion estimation method. For textured regions, we search the additional interpolation points for more accurate modeling. After the interpolation, we perform double precision mathematical modeling so as to find the best motion vector (MV). Experiments show that the proposed scheme has better PSNR performance than conventional modeling algorithms with minimum operation time.