Yajima et al. proposed a method based on amplitude and phase coding of audio signals. This method has relatively high sound quality because human auditory property is considered for embedding. However, in this method, the tolerance to attacks tends to be weak. Hence, we propose a high-tolerance watermarking method using BCH code which is one of error correcting code. This paper evaluates whether our method preserves the sound quality while ensuring high tolerance.

A monolithic frequency synthesizer with wide tuning range, low phase noise and spurs was realized in 0.13,$mu$m CMOS technology. It consists of an analog PLL, a harmonic-rejection mixer and injection-locked frequency doublers to cover the whole 6--18,GHz frequency range. To achieve a low phase noise performance, a sub-sampling PLL with non-dividers was employed. The synthesizer can achieve phase noise $-$113.7,dBc/Hz@100,kHz in the best case and the reference spur is below $-$60,dBc. The core of the synthesizer consumes about 110,mA*1.2,V.

We previously proposed a query-by-sketch image retrieval system that uses an edge relation histogram (ERH). However, it is difficult for this method to retrieve partial objects from an image, because the ERH is a feature of the entire image, not of each object. Therefore, we propose an object-extraction method that uses edge-based features in order to enable the query-by-sketch system to retrieve partial images. This method is applied to 20,000 images from the Corel Photo Gallery. We confirm that retrieval accuracy is improved by using the edge-based features for extracting objects, enabling the query-by-sketch system to retrieve partial images.

In this paper, we consider synchronization phenomena in coupled systems of piecewise constant oscillators. Both in-phase and anti-phase synchronization phenomena are observed in the oscillators, which are coupled by a voltage controlled current source (VCCS) with Signum-like characteristic. On the other hand, their co-existence is observed in the oscillators coupled by a VCCS with hysteresis characteristic. We analyze the stability of the synchronization phenomena in the coupled systems by using a fast calculation algorithm for the rigorous solutions. And we clarify the parameter regions of in-phase and anti-phase synchronization by deriving correlation coefficients. We suggest that the synchronization phenomena of the proposed systems qualitatively correspond to one of van der Pol oscillators coupled by passive elements. Some theoretical results are verified in the experimental circuits.

A two-dimensional (2D) wireless power transmission (WPT) system that handles a wide range of transmitted and received power is proposed and evaluated. A transmitter outputs the power to an arbitrary position on a 2D waveguide sheet by using a beam-forming technique. The 2D waveguide sheet does not require an absorber on its edge. The minimum propagation power on the sheet is increased 18 times by using the beam-forming technique. Power amplifier (PA) efficiency was improved from 19% to 46% when the output power was 10dB smaller than peak power due to the use of a PA supply-voltage and input power control method. Peak PA efficiency was 60%. A receiver inputs a wide range of power levels and drives various load impedances with a parallel rectifier. This rectifier enables a number of rectifying units to be tuned dynamically. The rectifier efficiency was improved 1.5 times while input power range was expanded by 6dB and the load-impedance range was expanded fourfold. The rectifier efficiency was 66-73% over an input power range of 18-36dBm at load impedances of 100 and 400Ω.

This paper proposes statistical analysis of phase-only correlation functions based on linear statistics and directional statistics. We derive the expectation and variance of the phase-only correlation functions assuming phase-spectrum differences of two input signals to be probability variables. We first assume linear probability distributions for the phase-spectrum differences. We next assume circular probability distributions for the phase-spectrum differences, considering phase-spectrum differences to be circular data. As a result, we can simply express the expectation and variance of phase-only correlation functions as linear and quadratic functions of circular variance of phase-spectrum differences, respectively.

The reliability of electromagnetic relay (EMR) which contains a permanent magnet (PM) can be improved by a robust design method. In this parameter design process, the calculation of electromagnetic system is very important. In analytical calculation, PM is often equivalent to a lumped parameter model of one magnetic resistance and one magnetic potential, but significant error is often caused; in order to increase the accuracy, a distributed parameter calculation model (DPM) of PM bar is established; solution procedure as well as verification condition of this model is given; by a case study of the single PM bar, magnetic field lines division method is adopted to build the DPM, the starting point and section magnetic flux of each segment are solved, a comparison is made with finite element method (FEM) and measured data; the accuracy of this magnetic field line based distributed parameter model (MFDPM) in PM bar is verified; this model is applied to the electromagnetic system of a certain type EMR, electromagnetic system calculation model is established based on MFDPM, and the static force is calculated under different rotation angles; compared with traditional lumped parameter model and FEM, it proves to be of acceptable calculation accuracy and high calculation speed which fit the requirement of robust design.

This paper presents an oscillator-based true random number generator (TRNG) that dynamically unbiases 0/1 probability. The proposed TRNG automatically adjusts the duty cycle of a fast oscillator to 50%, and generates unbiased random numbers tolerating process variation and dynamic temperature fluctuation. A prototype chip of the proposed TRNG was fabricated with a 65nm CMOS process. Measurement results show that the developed duty cycle monitor obtained the probability of ‘1’ 4,100 times faster than the conventional output bit observation, or estimated the probability with 70 times higher accuracy. The proposed TRNG adjusted the probability of ‘1’ to within 50±0.07% in five chips in the temperature range of 0°C to 75°C. Consequently, the proposed TRNG passed the NIST and DIEHARD tests at 7.5Mbps with 6,670µm2 area.

LED (Light Encryption Device) block cipher, one of lightweight block ciphers, is very compact in hardware. Its encryption process is composed of AES-like rounds. Recently, a scan-based side-channel attack is reported which retrieves the secret information inside the cryptosystem utilizing scan chains, one of design-for-test techniques. In this paper, a scan-based attack method on the LED block cipher using scan signatures is proposed. In our proposed method, we focus on a particular 16-bit position in scanned data obtained from an LED LSI chip and retrieve its secret key using scan signatures. Experimental results show that our proposed method successfully retrieves its 64-bit secret key using 36 plaintexts on average if the scan chain is only connected to the LED block cipher. These experimental results also show the key is successfully retrieved even if the scan chain includes additional 130,000 1-bit data.

Misbehaving nodes intrinsic to the physical vulnerabilities of ad-hoc sensor networks pose a challenging constraint on the designing of data fusion. To address this issue, a statistics-based reputation method for reliable data fusion is proposed in this study. Different from traditional reputation methods that only compute the general reputation of a node, the proposed method modeled by negative binomial reputation consists of two separated reputation metrics: fusion reputation and sensing reputation. Fusion reputation aims to select data fusion points and sensing reputation is used to weigh the data reported by sensor nodes to the fusion point. So, this method can prevent a compromised node from covering its misbehavior in the process of sensing or fusion by behaving well in the fusion or sensing. To tackle the unexpected facts such as packet loss, a discounting factor is introduced into the proposed method. Additionally, Local Outlier Factor (LOF) based outlier detection is applied to evaluate the behavior result of sensor nodes. Simulations show that the proposed method can enhance the reliability of data fusion and is more accurate than the general reputation method when applied in reputation evaluation.

A fully-integrated double-channel 5-Gb/s/ch 2:1 serializer array is designed and fabricated in a standard 0.18-$mu $m CMOS technology, which can be easily expanded to any even-number-channel array, e.g. 12 channels, by means of arrangement in a parallel manner. Besides two conventional half-rate 2:1 serializers, both phase-locked loop and delay-locked loop techniques are employed locally to deal with the involved clocking-related issues, which make the serializer array self-contained, compact and automatic. The system architecture, circuit and layout designs are discussed and analyzed in detail. The chip occupies a die area of 673,$mu $m$, imes ,$667,$mu $m with a core width of only 450,$mu $m. Measurement results show that it works properly without a need for additional clock channels, reference clocks, off-chip tuning, external components, and so on. From a single supply of 1.8,V, a power of 200,mW is consumed and a single-ended swing of above 300,mV for each channel is achieved.

In typical end-to-end recovery protocols, an ACK segment is delivered to a source node over a single path. ACK loss requires the source to retransmit the corresponding data packet. However, in underwater wireless sensor networks which prefer flooding-based routing protocols, the source node has redundant chances to receive the ACK segment since multiple copies of the ACK segment can arrive at the source node along multiple paths. Since existing RTO calculation algorithms do not consider inherent features of underlying routing protocols, spurious packet retransmissions are unavoidable. Hence, in this letter, we propose a new ACK loss-aware RTO calculation algorithm, which utilizes statistical ACK arrival times and ACK loss rate, in order to reduce such retransmissions.

The Internet Engineering Task Force (IETF) has been actively standardizing distributed mobility management (DMM) schemes with multiple Mobility Anchors (MAs). Yet, all existing schemes have limitations that preclude the efficient distribution of mobile data traffic, including single point failure problems, heavy tunneling overheads between MAs, and a restrictive traffic distribution for external nodes in a mobility domain. Therefore, this paper proposes an efficient mobility management scheme with a virtual Local Mobility Anchor (vLMA). While the vLMA is designed assuming multiple replicated LMAs for a PMIPv6 domain, it acts virtually as a single LMA for the internal and external nodes in the PMIPv6 domain. Furthermore, the vLMA distributes mobile data traffic using replicated LMAs, and routes packets via a replicated LMA on the optimal routing path. Performance evaluations confirm that the proposed scheme can distribute mobile data traffic more efficiently and reduce the end-to-end packet delay than the Distributed Local Mobility Anchor (DLMA) and the Proxy Mobile IPv6 (PMIPv6).

NAND-based block devices such as memory cards and solid-state drives embed a flash translation layer (FTL) to emulate the standard block device interface and its features. The overall performance of these devices is determined mainly by the efficiency of the FTL scheme, so intensive research has been performed to improve the average performance of the FTL scheme. However, its worst-case performance has rarely been considered. The present study aims to improve the worst-case performance without affecting the average performance. The central concept is to distribute the garbage collection cost, which is the main source of performance fluctuations, over multiple requests. The proposed scheme comprises three modules: i) anticipated partial log block merging to distribute the garbage collection time; ii) reclaiming clean pages by moving valid pages to bound the worst-case garbage collection time, instead of performing repeated block merges; and iii) victim selection based on the valid page count in a victim log and the required clean page count to avoid subsequent garbage collections. A trace-driven simulation showed that the worst-case performance was improved up to 1,300% using the proposed garbage collection scheme. The average performance was also similar to that of the original scheme. This improvement was achieved without additional memory overheads.

In this paper, a compression-friendly copyright- and privacy-protected image trading system is proposed. In the image trading system, the copyright of the image and the consumer's privacy is important. In addition, it should preserve existing image compression standards. In the proposed method, for privacy protection, the content provider (CP) multiplies random signs to the discrete wavelet transformed (DWTed) coefficients of an image to generate the visually encrypted image. The proposed visually protected images can be efficiently compressed by using JPEG 2000 which compresses the image in the DWTed domain as well. For copyright protection, the trusted third party (TTP) applies digital fingerprinting to the image in the encrypted domain. While in the conventional system, the amplitude-only image (AOI) which is the inversely transformed amplitude spectra of an image is used for privacy protection. Since, the AOI consists of real numbers, to store and transmit the AOI, it has to be quantized before compression. Therefore, quantization errors cannot be avoided in the conventional system. On the other hand, the proposed method applies the digital fingerprint in the DWTed domain, so clipping errors in decoding the image by the TTP is avoided. In addition, only a seed number which is input to a pseudo random number generator is shared between the CP and the consumer, whereas an extra image is shared in the conventional systems. Experimental results show that the proposed system is efficient in terms of privacy protection, compression performance, quality of fingerprinted images, and correct fingerprint extracting performance.

Arterial spin labeling (ASL) is a non-invasive magnetic resonance imaging (MRI) method that can provide direct and quantitative measurements of cerebral blood flow (CBF) of scanned patients. ASL can be utilized as an imaging modality to detect Alzheimer's disease (AD), as brain atrophy of AD patients can be revealed by low CBF values in certain brain regions. However, partial volume effects (PVE), which is mainly caused by signal cross-contamination due to voxel heterogeneity and limited spatial resolution of ASL images, often prevents CBF in ASL from being precisely measured. In this study, a novel PVE correction method is proposed based on pixel-wise voxels in ASL images; it can well handle with the existing problems of blurring and loss of brain details in conventional PVE correction methods. Dozens of comparison experiments and statistical analysis also suggest that the proposed method is superior to other PVE correction methods in AD diagnosis based on real patients data.

The traffic load of cellular networks varies in both time and spatial domains, causing many base stations (BS) to be under-utilized. Assisted by cell zooming, dynamic BS sleep control is considered as an effective way to improve energy efficiency during low traffic hours. Therefore, how densely the BSs should be deployed with cell zooming and BS sleeping is an important issue. In this paper, we explore the energy-optimal cellular network planning problem with dynamic BS sleeping and cell zooming for the cases in which traffic is uniformly distributed in space but time-varying. To guarantee the quality of multi-class services, an approximation method based on Erlang formula is proposed. Extensive simulations under our predefined scenarios show that about half of energy consumption can be saved through dynamic BS sleeping and power control. Surprisingly, the energy-optimal BS density we obtained is larger than the one without considering BS sleeping. In other words, deploying more BSs may help to save energy if dynamic BS sleeping is executed.

A discriminative reference-based method for scene image categorization is presented in this letter. Reference-based image classification approach combined with K-SVD is approved to be a simple, efficient, and effective method for scene image categorization. It learns a subspace as a means of randomly selecting a reference-set and uses it to represent images. A good reference-set should be both representative and discriminative. More specifically, the reference-set subspace should well span the data space while maintaining low redundancy. To automatically select reference images, we adapt affinity propagation algorithm based on data similarity to gather a reference-set that is both representative and discriminative. We apply the discriminative reference-based method to the task of scene categorization on some benchmark datasets. Extensive experiment results demonstrate that the proposed scene categorization method with selected reference set achieves better performance and higher efficiency compared to the state-of-the-art methods.

This paper presents an experimental investigation on the RF characteristics of a 3W-class cryogenically-cooled receiver amplifier employing a gallium-nitride high electron mobility transistor (GaN HEMT) with a blue light for mobile base stations. In general, a cryogenically-cooled receiver amplifier using a GaN HEMT exhibits unstable DC characteristics similar to those found in the current collapse phenomenon because the GaN HEMT loses thermal energy at cryogenic temperatures. The fabricated cryogenically-cooled receiver amplifier achieves stable DC characteristics by injecting blue light into the GaN HEMT instead of thermal energy. Experimental results show that the amplifier achieves fine stable DC characteristics for deviation in the drain-source current from 42% to 5% and RF characteristics for a maximum power added efficiency from 58% to 68% without and with the blue light at 60,K. The fabricated amplifier is effective in reducing the power consumption at cryogenic temperatures. To the best of our knowledge, this paper is the first report regarding RF characteristics of a cryogenically-cooled receiver amplifier using a blue light for mobile base stations.

This paper presents the design and radiation properties of a linearly polarized radial line microstrip antenna array (RL-MSAA) with U-slot circular microstrip antennas. A circular microstrip antenna (C-MSA) with U-shaped slot is used as a radiation element of the RL-MSAA. Radiation phase of the U-slot C-MSA is controlled by tuning the radius of the C-MSA and dimensions of the U-slot on the C-MSA; therefore, the desired phase distribution of the RL-MSAA can be realized. In this paper, a linearly polarized RL-MSAA with three concentric rows of C-MSAs at a spacing of 0.65 wavelengths is designed for 12GHz operation. In order to realize uniform phase distribution, the U-slot C-MSAs are arranged for inner two rows and normal C-MSAs are arranged for the termination row. Validity of the linearly polarized RL-MSAA with the U-slot C-MSAs for radiation phase control is demonstrated by simulation and measurement.