Lightwave switching is discussed with a cascaded connection of optical couplers with light intensity control elements. By employing wavelength-selective amplifiers such as a waveguide-type Raman amplifier, all-optical wavelength-selective switching can be realized. We discuss analytically using coupled-mode theory that the lightwave switching is feasible by controlling the intensity of propagating lightwave. The switching operation is verified numerically using finite-difference beam-propagation method. As a result, the expected operation is realized and some characteristics involved with dependencies of wavelength and phase are also investigated. A preliminary experiment using attenuators, beam splitters and mirrors is also described to verify the switching operation with only light-intensity control in interferometers.

Optically controlled beam forming techniques are effective for phased-array antenna control. We have developed the Fourier transform optical beamformer (FT-OBF). The antenna radiation pattern inputted into an amplitude spatial light modulator (A-SLM) is optically Fourier transformed to a specific phase-front light beam equivalent to an antenna excitation in the FT-OBF. Optical signal processing, used the Fourier transform optics, is effective to large-scale, two-dimensional, and high-speed signal processing. To implement a flexible and finer antenna beam pattern control, we use an A-SLM as input image formation of the FT optics. And, to realize a small-size FT-OBF, we use symmetric triplet lenses with convex, concave and convex lens. The total optical system becomes below 1/5 length compared with the length using single lens. Finally, we evaluated the developed FT-OBF with the generated amplitude and phase distributions, which excitation signal of an array antenna. We measured an antenna radiation beam pattern, beam steering and beam width control, in the C-band. Measurement results agreed with theoretical calculated results. These results show the feasibility of the spatial light modulator based FT-OBF.

Free-space optical communication systems can provide high-speed, improved capacity, cost effective and easy to deploy wireless networks. Experimental investigation on the next generation free-space optical (FSO) communication system utilizing seamless connection of free-space and optical fiber links is presented. A compact antenna which utilizes a miniature fine positioning mirror (FPM) for high-speed beam control and steering is described. The effect of atmospheric turbulence on the beam angle-of-arrival (AOA) fluctuations is shown. The FPM is able to mitigate the power fluctuations at the fiber coupling port caused by this beam angle-of-arrival fluctuations. Experimental results of the FSO system capable of offering stable performance in terms of measured bit-error-rate (BER) showing error free transmission at 2.5 Gbps over extended period of time and improved fiber received power are presented. Also presented are performance results showing stable operation when increasing the FSO communication system data rate from 2.5 Gbps to 10 Gbps as well as WDM experiments.

This paper reports on a fiber-optic system for in-building wireless communication/broadcast systems developed in Samsung Electronics. Our system delivers the third generation mobile system, satellite-digital multimedia broadcast, and wireless local access network services over a single strand of single-mode fiber or multi-mode fiber. We present the design issue and experimental results of the radio-over-fiber link.

In this paper we study the problem of how to identify multiple disjoint paths that have the minimum total cost OPT and satisfy a delay bound D in a graph G. This problem has lots of applications in networking such as fault-tolerant quality of service (QoS) routing and network-flow load balancing. Recently, several approximation algorithms have been developed for this problem. Here, we propose a new approximation algorithm for it by using the Lagrangian Relaxation method. We then present a simple approximation algorithm for finding multiple link-disjoint paths that satisfy the delay constraints at a reasonable total cost. If the optimal solution under delay-bound D has a cost OPT, then our algorithm can find a solution whose delay is bounded by (1+)D and the cost is no more than (1+k)OPT. The time complexity of our algorithm is much better than the previous algorithms.

A direction-oriented spatial interpolation technique for image de-interlacing is presented in this letter. The experimental results demonstrate that our method achieves excellent performance in terms of both objective and subjective image quality. The proposed algorithm also has a very computationally simple structure, and proves to be a good candidate for low-cost hardware interpolator.

Element value spread of an equal-ripple RC polyphase filter depends heavily on the order of zero assignment. To find the optimum design, we must conduct exhaustive design for all the possible zero assignments. This paper describes two circuit transformations on equal-ripple RC polyphase filters, which preserve their transfer functions, for reducing circuit design efforts. Proposed Method I exchanges (R,C) values to (1/C,1/R) for each stage. This gives a new circuit with different zero assignment for each stage of its original circuit. Method II flips over the original circuit and exchanges the resulting (Ri,Ci) values for (Cn-i+1,Rn-i+1) for each i-th stage. Those circuit transformations can reduce a number of circuit designs down to 1/4 of the straight-forward method. This considerably reduces a burden for exhaustive design for searching the minimum element value spread condition. Some design examples are given to illustrate the proposed methods.

This paper proposes a synthesis method of all low-voltage CMOS instantaneous-companding log domain integrators. The method is based on the exhaustive search of all low-voltage CMOS instantaneous-companding log domain integrators. All the integrators are derived from a general block diagram. A function of each block can be realized by any of a family of circuits and elemental circuits chosen from such families are combined to build an integrator. It is clarified that each family contains a few circuit topologies. All topologies of integrators including new ones are obtained from combinational procedure. Comparing characteristics of all generated integrators, ones satisfying required performances are found out.

We propose a model for constructing a multilayered boundary in an information system to defend against intrusive anomalies by correlating a number of parametric anomaly detectors. The model formulation is based on two observations. First, anomaly detectors differ in their detection coverage or blind spots. Second, operating environments of the anomaly detectors reveal different information about system anomalies. The correlation among observation-specific anomaly detectors is first formulated as a Partially Observable Markov Decision Process, and then a policy-gradient reinforcement learning algorithm is developed for an optimal cooperation search, with the practical objectives being broader overall detection coverage and fewer false alerts. A host-based experimental scenario is developed to illustrate the principle of the model and to demonstrate its performance.

Thanks to recent improvements in road heating technology, traffic problems due to icy roads are decreasing. However, there has always been concern about the high operational and maintenance cost associated with road heating. One way to reduce the cost is to reduce the time when power is applied for preheating because it is often applied even when a road is not likely to be icy. The authors believe that, if it is possible to forecast accurately whether a road will become icy, unnecessary preheating can be greatly reduced. This paper presents an algorithm for forecasting physical road conditions. The algorithm divides the weather conditions that people perceive daily into 11 patterns. The comparison between the changes in road conditions as determined by our method and known changes in road conditions has shown a 12% increase over previous methods in forecasting accuracy.

One of the system greatly affecting the performance of a database server is the size-division of buffer pools. This letter proposes an adaptive control method of the buffer pool sizes. This method obtains the nearly optimal division using only observed response times in a comparatively short duration.

A 10-GHz sub-harmonic Gilbert mixer is demonstrated in this paper using the 0.35 µm SiGe BiCMOS technology. The time-delay when the sub-harmonic LO (Local Oscillator) stage generates sub-harmonic LO signals is compensated by using fully symmetrical multiplier pairs. High RF-to-IF isolation and sub-harmonic LO Gilbert cell with excellent frequency response can be achieved by the elimination of the time-delay. The SiGe BiCMOS sub-harmonic micromixer exhibits 17 dB conversion gain, -74 dB 2LO-to-RF isolation, IP1 dB of -20 dBm, and IIP3 of -10 dBm. The measured double sideband noise figure is 16 dB from 100-kHz to 100-MHz because the SiGe bipolar device has very low 1/f noise corner.

In this paper, we propose a new technique for the scattering problems of multilayered inhomogeneous columnar dielectric gratings loaded rectangular dielectric constant both TM and TE waves using the combination of improved Fourier series expansion method, the multilayer method, and the eigenvalue matrix method. Numerical results are given for the power transmission coefficients in the parameters ε 3 /ε 0 , c/p, and b/d of rectangular cylinders to obtain the basic characteristic of the power transmission coefficients and reflection coefficients switching or frequency selective devices for both TM and TE waves. The influence of the incident angle and frequency of the transmitted power are also discussed in the connection with the propagation constant β in the free mode.

Next generation free electron lasers aim to generate x-ray pulses with pulse durations down to 30 fs, and possibly even sub-fs. Synchronization of various stages of the accelerator and the probe laser system to the x-ray pulses with stability on the order of the pulse width is necessary to make maximal use of this capability. We are developing an optical timing synchronization system in order to meet this challenge. The scheme is based on generating a train of short optical pulses, with a precise repetition frequency, from a mode-locked laser oscillator and distributed via length-stabilized optical fibers to points requiring synchronization. The timing information is embedded in the repetition frequency and its harmonics. A significant advantage of the optical synchronization system is that multiple mode-locked Ti:sapphire seed oscillators typically present in an accelerator facility can be replaced by the master mode-locked fiber laser. In this paper, we briefly review progress on the development of the synchronization system and then discuss the implementation of this new possibility. Several technical issues related to this approach are analyzed.

When a cylindrically curved concave conducting surface is terminated abruptly at the edge, the whispering gallery (WG) mode propagating toward the edge direction is radiated into the free space from the aperture plane at the edge. In this paper, by applying the new analysis method, we shall derive a uniform geometrical theory of diffraction solution (UTD) for the electric-type WG mode radiation field applicable in the transition region near the geometrical boundaries produced by the incident modal ray on the edge of the curved surface. The UTD is represented by the summation of the solution for the geometrical ray converted from the modal ray of the WG mode and the solution for the uniform edge diffracted ray scattered at the cylindrically curved edge. By comparing with the reference solution obtained numerically from the integral representation of the radiation field, we will confirm the validity and the utility of the UTD proposed in this paper.

We present theoretical foundations about error estimations of the global Krylov subspace techniques for multiple-inputs multiple-outputs (MIMO) Interconnect reductions. Analytical relationships between Lyapunov functions of the original interconnect network and those of the reduced system generated by the global Arnoldi algorithm will be developed. Under this framework, a new moment matching reduced network is proposed. Also, we will show that the reduced system can be expressed as the original network with some additive perturbations.

In this letter, we propose a new approach to estimate the degree of noise masking based on a sophisticated model for clean speech distribution. This measure, named as noise masking probability (NMP), is incorporated into the feature compensation technique to achieve robust speech recognition in noisy environments. Experimental results show that the proposed approach improves the performance of the baseline recognition system in the presence of various background noises.

In road-vehicle communication systems, the transmission rate between user terminals in the vehicle and the access points degrades due to changing path-loss and time-varying fading. In this paper, we used an inter-vehicle packet relay technique to improve channel quality in road-vehicle communication systems. We evaluated this method using numerical analysis to validate our method.

This paper deals with a design problem of an observer-based robust preview control system for uncertain discrete-time systems. In this approach, we adopt 2-stage design scheme and we derive an observer-based robust controller with integral and preview actions such that a disturbance attenuation level is satisfactorily small for allowable uncertainties.

In this paper, we propose an integral-type T-S fuzzy control scheme to deal with the regulation problem of buck converters without current sensors. This current sensorless control of converters provides the output voltage to achieve zero steady-state error and is with high robust performance. The stability of the overall closed-loop system is rigorously analyzed by using Lyapunov's method. Based on an appropriate assumption, the separation principle can still succeed in the control problems. Hence, the controller and observer gains can be separately obtained by solving LMIs via Matlab's toolbox. The observer-based controller is realized with Simulink and digital signal processors (DSPs). The simulation and experimental results verify the feasibility of the proposed schemes and show the satisfactory performance for the power converters.