This paper describes design considerations for high frequency active BPFs up to 100 MHz. The major design issues for high frequency active filters are the excess phase shift in the integrators and high power consumption of the integrators. Typical bipolar transistor based transconductors such as the Gilbert gain cell and the linearized transconductor with two asymmetric emitter-coupled pairs have been analyzed and compared. It has been clarified that the power consumption of the linearized transconductor can be much smaller than that of the Gilbert gain cell because of its high transconductance to working current ratio while maintaining a signal to noise ratio of the same order. A simple high-speed fully differential linearized transconductor cell is proposed with emitter follower buffers and resistive loads for excess phase compensation. A novel gyrator based transformation for the LC ladder BPF has been introduced. This transformation has resulted in a structure with simple capacitor-coupled active resonators which exactly preserves the original transfer function. A fourth order 10.7 MHz BPF IC was designed using the proposed transconductors. It was fabricated and has demonstrated the usefulness of the proposed approach. In addition, an experimental 100 MHz second order BPF IC with Q=14 has been successfully implemented indicating the potential of the proposed approach.

Real-time database systems have the properties of database and real-time systems. This means they must keep timing constraints of transactions as required in real-time systems, and at the same time ensure database consistency as required in database systems. Real-time concurrency control is a general approach for resolving this conflict. In this type of control, a concurrency control technique for database systems is integrated with a task scheduling technique for real-time systems. This paper surveys previous studies on real-time concurrency control and considers future research directions.

With rapid increase of information requirements from various application areas, there has been much research on the efficient information retrieval. A signature is an abstraction of information, and has been applied in many proposals of information retrieval systems. In this paper we evaluate the performance of various signature-based information retrieval methods and provide guidelines for the most effective usage to a given operational environment. We derive analytic performance evaluation models of these access methods based on retrieval time, storage overhead and insertion time. The relationships between various performance parameters are thoroughly investigated. We also perform simulation experiments by using wide range of parameter values and show that the performance experiments agree with those analytic models.

We propose a new type of Graph Rewriting Systems (GRS) that provide a theoretical foundation for using the reduction method which plays an important role on analyze network reliability. By introducing this GRS, several facts were obtained as follows: (1) We clarified the reduction methods of network reliability analysis in the theoretical framework of GRS. (2) In the framework of GRS, we clarified the significance of the completeness in the reduction methods. (3) A procedure of recognizing complete systems from only given rewriting rules was shown. Specially the procedure (3) is given by introducing a boundary graph (B-Graph). Finally an application of GRS to network reliability analysis is shown.

Let C{c1, , cm} be a family of subsets of a finite set S{1, , n}, a subset S of S is a co-hitting set if S contains no element of C as a subset. By using an O((log n)2) time EREW PRAM algorithm for a maximal independent set problem (MIS), we show that a maximal co-hitting set for S can be computed on an EREW PRAN in time O(αβ(log(nm))2) using O(n2 m) processors, where αmax{|cii1, , n} and βmax{|djj1, , n} with dj{ci|jci}. This implies that if αβO((log(nm))k) then the problem is solvable in NC.

A multicarrier modulation is considered as an effective technique in high speed digital transmission under the multipath fading. In this paper, we theoretically analyze the bit error rate (BER) performance of the multicarrier modulation/differential detection scheme, and show the trade-offs between the BERs and the number of carriers or the guard period to clarify the optimum values to minimize the BER in the number of carriers and the guard period.

An RF IC for a 1.1-V VHF paging receiver is developed. In order to reduce the number of components, it employs direct-conversion frequency shift keying (FSK) architecture. The RF IC adopts two new gain control circuits so as to achieve a wide input dynamic range with only a 1.1 V power supply. One is a low-voltage, low-noise, low-distortion RF amplifier and the other is a low-voltage AGC amplifier. By applying these new circuit technologies, the RF IC achieves a voltage gain of 50.5 dB and a noise figure of 4.3 dB with only 2.0 mW power consumption. Overall, the paging receiver achieves a high sensitivity of -130 dBm and low-intermodulation sensitivity of -37 dBm with bit error rate of 310-2. This paper describes the new high-frequency low-voltage circuit technologies applied in the RF IC.

The robust finite settling time stabilization problem is considered for a multivariable discrete time plant with structured uncertainties. Finite settling time (FST) stability of a feedback system is a notion introduced recently for discrete time systems as a generalization of the dead-beat response. The uncertain plant treated in this paper is described by (E0+ΣKi=1qiEi)x(t+1)(A0+ΣKi=1qiAi)x(t)+(B0+ΣKi=1qiBi)u(t), and y(t)=(C0+ΣKi=1qiCi)x(t) where Ei, Ai, Bi and Ci (0iK) are prescribed real matrices and qi (1iK) are uncertain parameters restricted to prescribed intervals [qi, i]. It is shown in this paper that a controller robustly FST stabilizes such an uncertain plant, if, the uncertain plant satisfies some conditions, and the controller simultaneously FST stabilizes a finite set of plants. The result leads to a testable necessary and sufficient condition of the existence of a solution to the robust FST stabilization problem, and a systematic method of designing a robust FST stable feedback system, in the case where the plant contains only one uncertain parameter.

This letter describes the concepts that the learnability of multilayer neural networks exists in a constrained hypersurface in learning space which is formed by input and output subspace of multilayer neural networks, and that a priori information, providing constraints on the learning space, is required for generalization.

An optical On-Off Keyed (OOK) pulse is often stretched in dispersive channels, thus producing intersymbol interference (ISI) and degrading the performance. In this paper, error probability is presented for a convolutionally encoded optical OOK channels with ISI. Both ISI-matched and ISI-mismatched decoders are taken into account in the error probability analysis. The encoded optical OOK signal is received by Avalanche Photo Diode (APD) and the number of APD output photo-electrons is counted for soft decision Viterbi decoding. Error probability is derived for a 3-bit and an ideal soft decision schemes in ISI-mismatched decoder and for an ideal soft decision scheme in ISI-matched decoder. Numerical results demonstrate the effects of mismatching or 3-bit soft decision scheme. Some computer simulations are carried out to confirm the validity of the analysis.

Power-law decay of current for the application of step-function voltage observed for amorphous materials can be expressed by an admittance sa(0a1) of a linear diode using complex angular frequency s. It is shown that power-law decay can be interpreted as a superposition of exponential decays having fractally distributed relaxation times and simulated using RC networks. By use of a similar manner, admittance s-b (0b1) showing the relation of duality can be simulated using RL networks. According to these methods, we can synthesize the admittance involving non-integer exponents systematically.

The research for rational quadratic Bézier curve and its applications for generating conics and curve-fitting have been reported in some papers. But rational cubic Bézier curves, for the complexity of computation of the weight parameters and the difficulty of the shape control, have very rarely been applied up to the present. In this letter, we proposed a new method to generate a rational cubic Bézier curve. For a given point S (assuming the curve pass it) and a given value of the intermediate variable t in the point, we can compute the weight parameters of the rational cubic Bézier curve according to the relation of the control polygon and the given point, and can generate the curve. Then we explained the relation among shape of curve, given point S and intermediate varisble t. As the samples of using the method, we showed the generation of the gear-shape curve, symmetrical curve and spindle-shape curve, etc.. Finally, we discuss the application of this method for curve-fitting.

A method for the recognition of Arabic printed scripts entered from an image scanner is presented. The method uses the Hough transformation (HT) to extract features, Dynamic programming (DP) matching technique, and a topological classifier to recognize the characters. A process of characters recognition is further divided into four parts: preprocessing, segmentation of a word into characters, features extraction, and characters identification. The preprocessing consists of the following steps: smoothing to remove noise, baseline drift correction by using HT, and lines separation by making an horizontal projection profile. After preprocessing, Arabic printed words are segmented into characters by analysing the vertical and the horizontal projection profiles using a threshold. The character or stroke obtained from the segmentation process is normalized in size, then thinned to provide it skeleton from which features are extracted. As in the procedure of straight lines detection, a threshold is applied to every cell and those cells whose count is greater than the threshold are selected. The coordinates (R, θ) of the selected cells are the extracted features. Next, characters are classified in two steps: In the first one, the character main body is classified using DP matching technique, and features selected in the HT space. In the second one, simple topological features extracted from the geometry of the stress marks are used by the topological classifier to completely recognize the characters. The topological features used to classify each type of the stress mark are the width, the height, and the number of black pixels of the stress marks. Knowing both the main group of the character body and the type of the stress mark (if any), the character is completely identified.

In order to evaluate multipath signal strengths reflected by mountain, a fundamental equation is derived for both cases where antenna beams are larger and smaller than a reflecting plane, assuming that reflection consists of absoption and scattering at the mountain surface. Absorption loss at a mountain surface was measured on a model propagation path by using sharp beam antennas to separately pick up the mountain-reflected signal.

This paper presents the successful performance of an optical waveguide phase controller for microwave signals generated by heterodyne photodetection. A 22 optical waveguide structure with four optical phase shifters was fabricated on a LiNbO3 substrate. As a result of heterodyne photodetection of two optical signals from wavelength-tunable laser diodes, two microwave signals at 585 MHz were generated and phase shifted in the manner of electro-optical phase retardation. The monolithic waveguide structure allowed linear phase shifting more than 1800 degrees. Similar phase shifting performances were also confirmed over a wide microwave frequency range from 300 MHz to 1.3 GHz. The optical waveguide structure demonstrated here will be applicable to fiber-optic fed microwave systems such as a phased array antenna.

We analyze the average bit error probability (BER) performances of BPSK with pilot tone in the frequency-selective Rayleigh fading channel, which can be characterized by the delay power spectrum due to multipath fading. The analysis is based on the error probability conditioned on the receiver input envelope in order to investigate the diversity effects. With taking into consideration of predetection receiving filter characteristic, the average BER is evaluated by treating the normalized standard deviation (rms delay spread), τ0/T (T: digital symbol period), of the delay power spectrum, BT product of predetection filter and power distribution between BPSK signal and pilot tone as parameters. The results show that the optimum power distribution (kopt) can be determined mainly according to the ratio (α) of tone extracting filter bandwidth to predetection filter bandwidth provided that α is small. For fixed α, τ0/T and kopt corresponding to α, optimum BT product, which minimizes the error rate, exists and the value is dependent on signal energy per bit to noise power spectral density ratio (SNR), and is affected slightly by the delay power spectrum shapes. In this paper, one-sided exponential, Gaussian and double spike shapes are treated as delay power spectrum shapes. On the average BER characteristics due to delay spread with fixed α, BT and kopt corresponding to α, the delay power spectrum shape is of no importance for τ0/T0.06. For τ0/T0.06, in the case of double spike delay power spectrum, BER is less than that for the other two spectral shapes. By making use of the selection diversity with 2-branch and predetection filter with optimum BT product, SNR can be improved by 16dB at the average BER of 10-4.

An information retrieval system based on a dynamic thesaurus was developed utilizing the connectionist approach. The dynamic thesaurus consists of nodes, which represent each term of a thesaurus, and links, which represent the connections between nodes. Term information that is automatically extracted from user's relevant documents is used to change node weights and generate links. Thus, node weights and links reflect a user's interest. A document retrieval experiment using the dynamic thesaurus was conducted in which both a high recall rate and a high precision rate were achieved.

This paper describes an automatic transistor model parameter generation technique for a circuit simulator which can take device geometry into account. An 'area factor' is used to generate model parameters for different transistor shapes; however, the conventional method could not reflect the actual geometry differences other than for the emitter area. This resulted in inaccurate model parameters and such parameters were not acceptable to accurately simulate circuits for RF ICs. The proposed technique uses actually measured parameters and process data for a reference transistor and generates the individual model parameters for different shape transistors. In this technique, the parasitic resistor values are calculated and fitted in place of directly extracting them from the measured data. This ensures a better estimate. The reference transistor is made sufficiently large to neglect measurement errors in generating the parasitic capacitors. Thus, the model parameters for a very small transistor can be generated accurately. The model generating procedure has been implemented as a pre-processor to SPICE. This technique enables a fast turn around for RF IC circuit design which uses various shape transistors.

In general, the work on developing an expert system has relied on domain experts to provide all domain-specific knowledge. The method for acquiring knowledge directly from experts is inadequate in oriental medicine because it is hard to find an appropriate expert and the development cost becomes too high. Therefore, we have developed two effective methods for acquiring knowledge indirectly from sample cases. One is to refine a constructed knowledge base by using sample cases. The other is to train a neural network by using sample cases. To demonstrate the effectiveness of our methods, we have implemented two prototype systems; the Oriental Medicine Expert System (OMES) and the Oriental Medicine Neural Network (OMNN). These systems have been compared with the system with the knowledge base built directly by domain experts (OLDS). Among these systems, OMES are considered to be superior to other systems in terms of performances, development costs, and practicalness. In this paper, we present our methods, and describe our experimental and comparison results.

The inverted slot line (ISL) has been propoaed for millimeter-wave LiNbO3 optical modulator. It is simple in structure, and capable of achieving the perfect velocity matching between carrier and modulating waves. The excellent performance of the ISL optical modulator has been demonstrated at 100 GHz, and the extension into the 50 GHz range is being expected. This paper addresses the analysis of the ISL based on the spectral domain approach. The major results obtained here are the demonstration of the perfect velocity matching not only at 10 GHz but also at 50 GHz, and the characterization of the ISL in terms of effective refractive index, characteristic impedance, overlap integral factor and transmission loss. The depth of optical phase modulation is also estimated at 50 GHz to show a promising performance in the millimeter-wave frequency range. The effective refractive index and the characteristic impedance are found to be theoretically predictable, but the field profile, the overlap integral factor and the transmission loss are not necessarily in good agreement with measurements. As a result of analysis, it can be concluded that the Y-cut substrate is superior to the Z-cut substrate in the following respects: 1. Coupling with the surface wave mode hardly occurs near the operating frequency range. 2. The perfect velocity matching can be attained with a larger spacing between the electrode and the ground plane. 3. The transmission loss is smaller. 4. The field intensity and the voerlap integral factor do not seem to be much deteriorated in the actual ISL.