Multicolor light emitting diodes (LEDs) which emit red (R), green (G) and blue (B) light have been realized by stacking a two-color emission part on a single-color emission part. The former part consists of two emissive layers of red and blue light, which can be selected by changing the polarity of applied field. The latter part consists of a single-color emission part which emits green light. The emission from the diode in the whole visible spectral range can be modulated by the combination of applying various voltages to the two-color and to the single-color emission parts, separately.

Recent technologies of organic film devices are reviewed. New technologies of fabrication and characterization of organic thin films, electro-mechanical conversion materials, and applications for electrical and optical devices are discussed. In this review paper, especially organic light emitting diodes, tunneling junctions using polyimide Langmuir-Blodgett films, tunneling spectroscopy and high-density recording, plastic actuators using conducting polymers, molecular self-assembly process for fabricating organic thin film devices are reviewed.

The chirp noise effect in a directly modulated semiconductor laser diode (LD) is experimentally studied. A previous theoretical study reported that, when an LD is directly modulated, turn-on jitter caused by spontaneous emission, combined with chromatic dispersion, becomes a source of noise in fiber transmission and restricts system performance. This paper points out that, on the contrary, imperfection in LD driving circuits causes chirp noise and limits transmission performance in actual systems. Experiments regarding dependence of chirp noise on LD modulation conditions are also presented, which show that a high relaxation oscillation frequency and a short turn-on delay time are preferable from the viewpoint of chirp noise.

In this article, we propose a square wave generator whose switching threshold values are switched by external inputs. This circuit is designed to simulate the synchronized luminescence of coupled fireflies. We investigate the behavior of the solutions in two coupled oscillators. The dynamics are demonstrated by a linear autonomous equation piecewisely, therefore, a one-dimensional return map is derived. We also prove the existence of stable in-phase synchronization in the coupled oscillator by using the return map, and we show the existence of regions of periodic solutions within a parameter space. Some theoretical results are confirmed by laboratory measurements.

The effect of sampling-pulse pedestals, generated by pulse compression, on the temporal resolution in electro-optic (EO) sampling is studied both theoretically and experimentally. Analysis is made on how the pedestals degrade a measurement bandwidth and a temporal waveform. Based on the analysis, a practical guideline on the suppression of pedestals is also given. Gain-switched laser diode (LD) pulses adiabatically soliton-compressed using a dispersion decreasing fiber are used to confirm the theoretical results, and are successfully applied to high-temporal-resolution (>100 GHz) EO sampling measurements.

This letter proposes a Perfect-Reconstruction (PR) encryption scheme based on a PR QMF bank. Using the proposed scheme, signals can be encrypted and reconstructed perfectly by using two Periodically Time-Varying (PTV) digital filters respectively. Also we find that the proposed scheme has a "good" encryption effect and compares favorably with frequency scramble in the aspects of computation complexity, PR property, and degree of security.

This paper deals with a probabilistic formulation of the diffraction and scattering of a plane wave from a periodic surface randomly deformed by a binary sequence. The scattered wave is shown to have a stochastic Floquet's form, that is a product of a periodic stationary random function and an exponential phase factor. Such a periodic stationary random function is then represented in terms of a harmonic series representation similar to Fourier series, where `Fourier coefficients' are mutually correlated stationary processes rather than constants. The mutually correlated stationary processes are written by binary orthogonal functionals with unknown binary kernels. When the surface deformations are small compared with wavelength, an approximate solution is obtained for low-order binary kernels, from which the scattering cross section, coherently diffracted power and the optical theorem are numerically calculated and are illustrated in figures.

In this Letter, we investigate the loss performance of a discrete-time single-server queueing system with periodic vacations, with which we are often confronted in traffic control, such as cell scheduling or priority control schemes, at ATM nodes. Explicit expressions are derived for the cell loss ratio in terms of the distribution of the buffer contents in an infinite capacity queue.

This paper presents a new generation method of the periodic orthogonal numerical sequences with small maximum amplitude. In the generation method, complex exponential sequences are used as the generating sequences and such periodic orthogonal numerical sequences are constructed from the discrete Fourier transform of the generating sequences. Until now, there has not been found a generation algorithm to derive such sequences with any period. It is shown that the proposed generation method can derive periodic orthogonal real sequences with the maximum amplitude less than 1.5 for the period 1N200 and periodic orthogonal coplex sequences with all the sbsolute amplitude value of 1 for any period.

This paper describes a method to distinguish phase noise and amplitude noise from total oscillator noise in circuit simulation, and derives general relationships between periodic time-varying transfer functions for oscillators and phase and amplitude noises.

From a sequence {ai}i0 over GF(p) with period pn-1 we can obtain another periodic sequence {i}i0 with period pn-2 by deleting one symbol at the end of each period. We will give the bounds (upper bound and lower bound) of linear complexity of {i}i0 as a typical example of instability of linear complexity. Derivation of the bounds are performed by using the relation of characteristic polynomials between {ai}i0 and {ai(j)}i0={ai+j}i0, jGF(p){0}. For a binary m-sequence {ai}i0 with period 2n-1, n-1 a prime, we will give the explicit formula for the characteristic polynomial of {i}i0.

A two-dimensional receiver OEIC array having an address selector for highly parallel interprocessor networks has been realized. The receiver OEIC array consists of two-dimensionally arranged 1616 (256) optical receiver cells with switching transistors, address selectors (decoders), and a comparator. Each optical receiver comprises a pin PD and a transimpedance-type HBT amplifier. The HBT has an InP passivation structure to suppress the emitter-size effect, which results in the improvement of current gains, especially at low collector current densities. The receiver OEIC array was fabricated on a 3-inch diameter InP substrate with pin/HBT integration technology. Due to the function of address selection, only one cell is activated and the other cells are mute, so the receiver OEIC array shows low crosstalk and low power consumption characteristics. The array also shows a 266-Mb/s data transmission capability. This receiver OEIC array is a most complex InP-based OEIC ever reported. The realization of the two-dimensional receiver OEIC array promises the future interprocessor networks with highly parallel optical interconnections.

Theoretical values of site attenuation for broadband receiving antenna or the antenna factor of broadband antenna over the frequency range from 30 MHz to 1 GHz have been calculated or measured by some researchers. For a frequency range over 1 GHz, wire antennas or horn antennas should be used. However, the theoretical site attenuation or antenna factor over 1 GHz have never yet been calculated. A CLS (Conical Log-periodic Spiral) antenna is generally used for EMC/EMI measurements in the microwave band as a broadband wire antenna for the swept frequency method. However, this antenna has the defect that its use results in the loss of polarization information. So we proposed an improved CLS antenna which has linear polarization. This new CLS antenna has another wire wound symmetrically to that of the standard CLS antenna. For this reason, we named it a double-wire CLS antenna. The double-wire CLS antenna loses no polarization information. We calculated the height pattern and the frequency characteristics of CSA (Classical Site Attenuation) for the double-wire CLS antenna when used for receiving, or used for both transmitting and receiving, as well as the antenna factor. Moreover, NSA (Normalized Site Attenuation) when the double-wire CLS antenna is used for receiving or used for both transmitting and receiving in free space were calculated.

Firstly we show a usuful property of the fast algorithm for computing linear complexities of p-ary periodic sequences with period pn (p: a prime). Secondly the property is successfully applied to obtain the value distribution of the linear complexity for p-ary periodic sequences with period pn.

A new sealing structure for helical heater terminal used in a combination microwave oven is suggested, and its sealing characteristics are investigated. The new structure is simply a conductor tube coaxially covering the heater at the input terminal. With an optimally-designed structure of this type, the transmission coefficient of the heater can be reduced to -41.6 dB at 2450 MHz. When installed in a test set which is running with an output of 500 W at 2450 MHz, the microwave power leaking out from the heater terminal is found to be less than 0.2 mW/cm2.

The problem of non-preemptive scheduling of real-time periodic tasks with specified release times on a uniprocessor system is known as NP-hard problem. In this paper we propose a new non-preemptive scheduling algorithm and a new static scheduling strategy which use the repetitiveness and the predictability of periodic tasks in order to improve schedulabilities of real-time periodic tasks with specified release times. The proposed scheduling algorithm schedules periodic tasks by using the heuristic that precalculates if the scheduling of the selected task leads to the case that a task misses a deadline when tasks are scheduled by the non-preemptive EDF algorithm. If so, it defers the scheduling of the selected task to avoid the precalculated deadline-missing. Otherwise, it schedules the selected task in the same way as the non-preemptive EDF algorithm. Our scheduling algorithm can always find a feasible schedule for the set of periodic tasks with specified release times which is schedulable by the non-preemptive EDF algorithm. Our static sheduling strategy transforms the problem of non-preemptive scheduling for periodic tasks with specified release times into one with same release times for all tasks. It suggests dividing the given problem into two subproblems, making a non-preemptive scheduling algorithm to find two feasible subschedules for the two subproblems in the forward or backward scheduling within specific time intervals, and then combining the two feasible subschedules into a complete feasible schedule for the given problem. We present the release times as a function of periods for the efficient problem division. Finally, we show improvements of schedulabilities of our scheduling algorithm and scheduling strategy by simulation results.

Laser module fabricated with silicon platform technology is very attractive for low-cost modules. The technology enables passive optical alignment of an LD to an optical fiber. Our marker design for passive alignment allows positioning accuracy within 1 µm of LD. However, coupling efficiency is a key issue because that by conventional butt coupling scheme is low with about 10 dB coupling loss. We investigated optical coupling characteristics in various types of coupling scheme: conventional flat end fibers, cone fibers, integrated GRIN rod lenses on the platform and the coupling with new-type LDs integrated with spot size transformer. Improvement of coupling efficiency with 3 dB and 7.5 dB compared to flat-end fiber is achieved by using the cone fiber and the GRIN rod lens, respectively, although 1-dB coupling tolerances for alignment deteriorated with these schemes. We obtained high efficient coupling with 3.5 dB coupling loss and wide alignment tolerance of 2.3 µm simultaneously with a new-type LD integrated with spot size transformer owing to its expanded spot size characteristics.

We propose an InGaAlAs waveguide p-i-n photodiode (WG-PD) with a thick symmetric double-core for surface-hybrid integration onto optical platforms, which can be applied to low cost optical modules for access networks. The waveguide structure is designed to efficiently couple to flat-ended single mode fibers while maintaining low-voltage (less than 2 V) operation. Crystal growth conditions and a passivation technique are also investigated for obtaining high responsivity, low dark current and highly reliable operation. Fiber-coupled responsivity as high as 0.95 A/W, at a 1.3-µm wavelength, and vertical coupling tolerance as wide as 2.6 µm are demonstrated for a dispersion-shifted fiber (DSF) coupling at an operating voltage of 2 V. Dark current is as low as 300 pA at 25 and 12 nA at 100. A temperature accelerated aging test is performed to show the feasibility of using the WG-PD in long-term practical applications.

Periodic reservation allows periodic and random packets to share the same satellite random access channel efficiently. The periodic reservation protocol is particularly suitable for mobile satellite position reporting services, where some of the information messages, such as dispatch function, are classified as "periodic" and others, such as signaling, are classified as "random." When a new mobile terminal logs on to the system, Network Management Center (NMC) reserves subsequent time slots for transmitting periodic packets without contention. A mobile terminal recognizes each time slot as "reserved" or "unreserved (available)" according to the broadcast message received from NMC. Other random packets use the slotted ALOHA protocol to contend with other mobile terminals for an unreserved time slot. The performance results suggest that the use of the periodic reservation protocol can be regarded as a viable solution for mobile satellite position reporting services such as automatic dependent surveillance (ADS).

This paper describes the technological issues in achieving a low-cost hybrid WDM module for access network systems. The problems which should be resolved in developing a low-cost module are clarified from the viewpoint of the module assembly in mass production. A design concept for a low-cost module suitable for mass production is indicated, which simplifies the alignment between a laser diode and a waveguide, and reduces the number of the components such as lenses and mirrors. The low-cost module is achieved by employing a flip-chip bonding method with passive alignment using a spot-size converter integrated laser diode (SS-LD) and p-i-n waveguide photodiodes (WGPDs) on a planar lightwave circuit (PLC) platform. We confirm that the SS-LD and the WGPD provide high coupling efficiency with a large tolerance for passive alignment. To achieve a high-sensitivity receiver, the module is designed to employ an asymmetric PLC Y-splitter that prefers a PD responsivity to an LD output power because of the high-coupling efficiency of the LD, and to employ a bare preamplifier mounting to reduce the parasitic capacitance into a preamplifier. We also demonstrate the dynamic performance for a 50-Mb/s burst signal, such as a high sensitivity, an instantaneous AGC response, and a small APC deviation of the transceiver.