If the signal is not Gaussian, then the power spectral density (PSD) approach is insufficient to analyze signals and we resort to estimate the higher order spectra of the signal. However, estimation of the higher order spectra is even more time consuming, for example, the complexity of trispectrum is O(N 4). This problem becomes even more serious when short time Fourier transform (STFT) is computed - computation of the trispectrum is required after every shift of the window. In this paper, a method to recursively compute trispectrum has been presented and it is shown that the computational complexity, for a window size of N, is reduced to be O(N 3) and is the same as the space complexity.

We have developed a stereoscopic large LED display with parallax barrier for use by the general public and stereoscopic cameras to show real world images in 3D. This paper aims to analyze stereoscopic camera separation and convergence angle to make the most use of a field of interest and the reproducible space provided by the large stereoscopic LED display. We describe the principle of a stereoscopic LED display with a parallax barrier and its reproducible space that is determined by the allowable range of disparity to fuse stereoscopic images. By using a model of stereoscopic imaging and display process, we introduce the formulas of the reproduced positions on our developed stereoscopic LED display. Furthermore, we analyze relationships between the stereoscopic camera separation, the convergence angle, the area of a field of interest, and the depth range of the reproduced space. The results show there are four categories in camera configurations: there are three kinds of camera configurations that have different characteristics and one configuration that is not recommended. Category A configuration reproduces a wide area of the field of interest in a long range of depth. Category B functions as a reduction of the field of interest. Category C functions as a magnification of the field of interest. In Category D, a narrow area of the field is reproduced in a short range of depth. In particular, for use by stereoscopic LED display with a rather low resolution, Category A and Category C are recommended because they fully use the reproducible positions.

A rigorous and simple method is proposed for analyzing guided modes of metallic electromagnetic crystal waveguides. The method is a combination of generalized reflection and transmission matrices and the mode-matching technique. Fast convergence, low computer cost, and high calculating precision are main advantages of the proposed method. This method can easily avoid the relative convergence phenomena than a classical mode-matching method, and the proposed formulation is very suitable to analyzing multilayered problems with very low computer cost. The existence of H-polarized modes in metallic electromagnetic crystal waveguides has been verified.

In this paper, we propose a new method that can remove view-disturbing noises from stereo images. One of the thorny problems in outdoor surveillance by a camera is that adherent noises such as waterdrops on the protecting glass surface lens disturb the view from the camera. Therefore, we propose a method for removing adherent noises from stereo images taken with a stereo camera system. Our method is based on the stereo measurement and utilizes disparities between stereo image pair. Positions of noises in images can be detected by comparing disparities measured from stereo images with the distance between the stereo camera system and the glass surface. True disparities of image regions hidden by noises can be estimated from the property that disparities are generally similar with those around noises. Finally, we can remove noises from images by replacing the above regions with textures of corresponding image regions obtained by the disparity referring. Experimental results show the effectiveness of the proposed method.

In order to efficiently mitigate emissions radiated from electrical equipment, emission source visualization methods need to be studied. In this paper, we propose a new macroscopic visualization method based on an optimization process which uses only cylindrically-scanned electric field amplitude data from an EMI test facility as specified by CISPR, and so does not need a special measurement system. The presented method divides the visualization space into three-dimensional rectangular cells, and estimated current values through the optimization process are sorted into each corresponding cell. By displaying the summed value of every cell, the emission source can be visualized. For this study, the spatial resolution was evaluated by computer simulation, with a result of around 0.2 m using a cell size of 0.1 m. With subsequent experimental verification using a comb generator in a semi-anechoic chamber, the visualization deviation was found to be less than 0.1 m in a frequency range of 100 MHz to 800 MHz. When two spherical dipole antennas were used, the deviation was less than 0.15 m. Finally, visualization results from a facsimile unit and a PC as real EUTs were shown and basic applicability of this method demonstrated.

This paper analytically studies performance improvement achieved by packet dispersion. Contrary to the previous work on packet dispersion, we consider the tail distribution of queue length and that of packet delay as performance measures, and we model a packet network as multiple parallel queues where the arrival processes from sources are not renewal but highly bursty. To appropriately evaluate the performance improvement achieved by packet dispersion, we develop approximate formulas to estimate the tail distributions. Our approximate formulas yield more accurate estimations than the standard approximate formulas. In the numerical results, we observe that packet dispersion can greatly improve the delay performance of packets. We also see that packet-level load balancing is superior to flow-level load balancing for any distribution ratio.

In this paper, the confinement loss of octagonal photonic crystal fibers (PCFs) with an isosceles triangle lattice of air-holes are numerically investigated. Taking into account the confinement loss, the mode field diameter (MFD), the effective area (Aeff) and the chromatic dispersion of octagonal PCFs are calculated, compared to conventional hexagonal PCFs. It is found from confinement loss and MFD results that the octagonal PCFs can confine the field strongly than the hexagonal PCFs due to the different air filling fraction. Moreover, it is shown that the octagonal PCFs are obtained not only positive but also negative larger dispersion values and smaller Aeff values compared to the hexagonal PCFs.

Bi-stable displays form the foundation of a novel and attractive LCD technology. From now on, images can be maintained on the LCD after driving voltages have been withdrawn from the electrodes. In low frame-rate applications such as e-books, e-labels, smartcards etc., this offers a major improvement in power consumption and battery life. However, bi-stable displays require high driving voltages and complex waveforms. Furthermore, the nature of some applications doesn't allow the use of relatively large passive components. This rules out more traditional approaches for high-voltage generation with external coils or capacitors. This paper describes the design of completely integrated and programmable high-voltage generators capable of generating output voltages up to 50 V out of a 3 V supply voltage. Features like 8-bit output voltage programmability and stabilisation were implemented to make this type of high-voltage generator suitable for bi-stable display drivers. Design aspects and simulation results are discussed, as well as measurements on prototype generators implemented in the 0.7 µm 100 V I2T100 technology from AMI Semiconductor.

We clarify the effective range of distance between the front and rear images of the depth-fused 3-D (DFD) visual illusion. The DFD visual illusion is perceived when two images with many edges in the front and rear frontal-parallel planes at different depths are overlapped from the viewpoint of an observer. We evaluated how the fusion of the DFD visual illusion depended on the difference in distance between the front and rear images when the distance between the two images was changed. Subjective tests clarified the cases where DFD can be applied.

Displaced subdivision surface representation [13] is a new form of representing a polygonal surface model, where a detailed surface model is defined as a scaler-valued displacement map over a smooth domain surface; it puts forth a number of attractive features for editing, geometry compression, animation, scalability, and adaptive rendering of polygonal models. The construction of the smooth domain surface is a challenging task in the conversion process of a detailed polygonal surface model into this representation. In this paper, we propose a new efficient method for defining the smooth domain surface based on -subdivision scheme. The proposed algorithm not only performs better in terms of the quality of the generated surfaces but is computationally more efficient and occupies less memory as compared to the original algorithm [13] and generates surfaces with more levels of detail due to the specific nature of -subdivision when the prescribed target complexity of the generated mesh must not be exceeded. To corroborate the efficiency and the quality of the new technique, the conversion results for several public domain models have been presented.

The "Proactive Desk" is a new human-machine interface for the desktop operations of computers. It provides users with tactile sensation in addition to visual sensation. Two linear induction motors underneath the desk generate a two-dimensional force to move objects and control their positions on the desktop using feedback control, and users feel tactile sensation while handling those objects. In this paper, we examined the effects of adding haptic information to simple mouse operation using the Proactive Desk. In our experiment, we used a button-type visual stimulus with and without haptic information. When using haptic conditions, three types of force feedback pattern were displayed: "Edge," "Resistance to motion" and "Attractive force," and each had three force strength conditions: no, half and full. The subject was asked to push buttons twenty times as the buttons were shown one after the other on the desk as quickly as possible. Consequently, the reaction times for pushing the button for all haptic conditions, except for the half-force condition of "Attractive force," were significantly faster than no-force (without haptic information) condition. This result shows that the haptic information was advantageous for easy operation.

We consider a network, where a special data called certificate is issued between two users, and all certificates issued by the users in the network can be represented by a directed graph. For any two users u and v, when u needs to send a message to v securely, v's public-key is needed. The user u can obtain v's public-key using the certificates stored in u and v. We need to disperse the certificates to the users such that when a user wants to send a message to the other user securely, there are enough certificates in them to get the reliable public-key. In this paper, when a certificate graph and a set of communication requests are given, we consider the problem to disperse the certificates among the nodes in the network, such that the communication requests are satisfied and the total number of certificates stored in the nodes is minimized. We formulate this problem as MINIMUM CERTIFICATE DISPERSAL (MCD for short). We show that MCD is NP-Complete, even if its input graph is restricted to a strongly connected graph. We also present a polynomial-time 2-approximation algorithm MinPivot for strongly connected graphs, when the communication requests satisfy some restrictions. We introduce some graph classes for which MinPivot can compute optimal dispersals, such as trees, rings, and some Cartesian products of graphs.

Multi-projector technology has been under consideration in recent years. This technology allows the generation of wide field of view and high-resolution images in a cost-effective manner. It is expected to be applied extensively to training simulators where vivid immersive sensations and precision are required. However, in many systems the viewing frustums cannot be automatically assigned for distributed rendering, and the required manual setup is complicated and difficult. This is because the camera should be coincide exactly with a desired eye point to avoid perspective distortions. For the actual applications, the camera is seldom able to be set up at the desired eye point because of physical constraints, e.g., a narrow cockpit with many instruments. To resolve this issue, we have developed a "virtual camera method" that yields high-precision calibration regardless of the camera position. This method takes advantage of the quadratic nature of the display surface. We developed a practical real-time multi-projector display system for applications such as training simulators, that require high-accuracy in geometry and rapid response time.

Power Spectral Density (PSD) computed by taking the Fourier transform of auto-correlation functions (Wiener-Khintchine Theorem) gives better result, in case of noisy data, as compared to the Periodogram approach in case the signal is Gaussian. However, the computational complexity of Wiener-Khintchine approach is more than that of the Periodogram approach. For the computation of short time Fourier transform (STFT), this problem becomes even more prominent where computation of PSD is required after every shift in the window under analysis. This paper presents a recursive form of PSD to reduce the complexity. If the signal is not Gaussian, the PSD approach is insufficient and we estimate the higher order spectra of the signal. Estimation of higher order spectra is even more time consuming. In this paper, recursive versions for computation of bispectrum has been presented as well. The computational complexity of PSD and bispectrum for a window size of N, are O(N) and O(N2) respectively.

This paper presents an approach that uses the Viterbi algorithm in a stereo correspondence problem. We propose a matching process which is visualized as a trellis diagram to find the maximum a posterior result. The matching process is divided into two parts: matching the left scene to the right scene and matching the right scene to the left scene. The last result of stereo problem is selected based on the minimum error for uniqueness by a comparison between the results of the two parts of matching process. This makes the stereo matching possible without explicitly detecting occlusions. Moreover, this stereo matching algorithm can improve the accuracy of the disparity image, and it has an acceptable running time for practical applications since it uses a trellis diagram iteratively and bi-directionally. The complexity of our proposed method is shown approximately as O(N2P), in which N is the number of disparity, and P is the length of the epipolar line in both the left and right images. Our proposed method has been proved to be robust when applied to well-known samples of stereo images such as random dot, Pentagon, Tsukuba image, etc. It provides a 95.7 percent of accuracy in radius 1 (differing by 1) for the Tsukuba images.

A new dual-slope ramp (DSR) reset waveform is proposed to improve the dark room contrast ratio in AC-PDPs. The proposed reset waveform has two different voltage slopes during a ramp-up period. The first voltage slope lower than the conventional ramp voltage slope plays a role in producing the priming particles under the low background luminance, which is considered to be a kind of pre-reset discharge. On the other hand, the second voltage slope higher than the conventional ramp voltage slope produces a stable reset discharge due to the presence of the priming particles, but gives rise to a slight increase in the background luminance. Thus, a bias voltage is also applied during a part of the second voltage-slope period to adjust the background luminance and address discharge characteristics. As a result, the proposed dual-slope reset waveform can lower the background luminance without causing the discharge instability, thereby improving the high dark room contrast ratio of an AC-PDP without reducing the address voltage margin.

To understand the brightness uniformity for the driver of the LED array display, automatic electronic measurement equipment and its testing scheme will be proposed in this paper. The driving performance and dynamic characteristics will be investigated by using the proposed current-based bias voltage regulator. A complete testing procedure will be provided to assess the performance for the LED array display driver.

We had recently measured a chromatic dispersion of optical fiber and a time delay of chirped fiber grating based on a bidirectional modulation of an optical intensity modulator. In this paper, we analyze characteristics of the chromatic dispersion measurement method using a bidirectional modulation of an optical intensity modulator, and give a detailed explanation about the selection of measurement setup parameters to achieve an accurate measurement. We also propose a modified measurement system to decrease relative intensity noise caused by the bidirectional transmission through a device under test.

This paper proposes a backlight module which drives multiple cold-cathode fluorescent lamps (CCFLs) with a current mirror technique to equalize the driving current for each lamp. We first adopt a half-bridge parallel-resonant inverter as the main circuit and use a single-input, multiple-output transformer to drive the multi-CCFLs. Next, we introduce current-mirror circuits to create a new current-sharing circuit, in which its current reference node and the parallel-connected multi-load nodes are used to accurately equalize all CCFLs' driving current. This will balance each lamp's brightness and, consequently, improve the picture display quality of the related liquid crystal display (LCD). This paper details the design concept for each component value with the assistance of an actual design example. The results of the example are examined with its actual measurements, which consequently verify the correctness of the proposed control strategy.

We studied 10 Gbit/s-based time-spreading and wave-length-hopping (TS-WH) optical code division multiplexing (OCDM) using fiber Bragg gratings (FBGs). To apply it to such the high bit rate system more than ten gigabit, two techniques are adopted. One is encoding with the maximum spreading time of 400 ps, which is four times as data bit duration, to encode without shortening chip duration. Another is encoder design. The apodized refractive index profile to the unit-gratings composing the encoder is designed to encode the pulses with 10-20 ps width at 10 Gbit/s rate. Using these techniques, 210 Gbit/s OCDM is demonstrated successfully. In this scheme, transmission distance is limited due to dispersion effect because the signal has wide bandwidth to assign a wavelength-hopping pattern. We use no additional devices to compensate the dispersion, in order to construct simple and cost-effective system. Novel FBG encoder is designed to incorporate both encoding and compensating of group delay among chip pulses within one device. We confirm the extension of transmission distance in the TS-WH OCDM from the demonstration over 40 km-long single mode fiber.